PROPOSED WORK FOR CONSTRUCTION OF READING ROOM CUM LIBRARY IN ADHEWADA TPS 10, FP NO.33 FOR BHAVNAGAR MUNICIPAL CORPORATION,BHAVNAGAR.

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and disposing

off the excavated stuff upto 50 Meter lead.(A) Loose or soft

Excavation for foundation for depth from 1.5 m to 3.0m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Excavation for foundation for depth from 3.0 m to 5.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense or Hard soil

Boring holes 3.5 m deep in ordinary soil (for cast in situ

piles) and getting out the soil and disposal of the surplus

excavated soil as directed within a lead of 50 Meter for

following diameter of pipes.(iii) 300 mm

(ii) Uncoursed Rubble Masonry with hard stone of

approved quality in foundations and plinth in Cement

Mortar 1:5 (1-cement : 5-coarse sand including levelling

up etc. complete

Providing Supplying and laying Filling in foundation, plinth,

trench and uneven area of plot (for levelling and

6.00 maintianing slop) with murrum or selected soil in layers of 1751.28 CUM 301.58

20 cm. Thickness. Including levelling, watering, ramming

and consolidating etc.As dirceted by Architect.

Providing and laying ordinary cement concrete M-150

and curing complete including the cost of form work but

7.00 excluding the cost of reinforcement for reinforced 182.84 CUM 4008.81

concrete work in Bases of Flooring and the like and Mass

concrete. For PCC

Providing laying Controled Reinforced cement concrete M-

using minimum Cement content @ 450 kg/Cmt including

curing etc complete including the cost of form work but

excluding cost of reinforcement for reinforced concrete work

in concrete road Coarse and fine aggregate confirming to

IS:383 maximum size of coarse aggregate not exceeding

mm, using mechanical weigh batcher, mixed as per approved

mix design, laid, placed & distributed with sufficient man

power using M.S. Side Rail of road thickness with necessary

8.00 nut bolt plates, fixing as per width, compacted with Poker 76.50 CUM 5500.00

vibrator V.D. system ( Trimix ) & Surface Plate Vibrator,

Troweling to be carried out with the same machine running

on troweling blades, finished in a continuous operation

including provision of contraction, expansion, construction

and longitudinal joints, joint filler separation membrane,

sealant primer, joint sealant debonding strip, dowel bar, tie

rod, Surface Hardner must be spread on final concrete surface

to harden the top surface, admixtures as approved, curing

compound, finishing to lines and grades including form work.

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in :

(a) Foundations, footings Bases of columns and raft slab

Providing and laying controlled cement concrete M-200 for

10.00 R.C.C. bored piles including ramming, vibrating, curing and 26.69 CUM 4639.10

finishing complete.

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

11.00 the cost of reinforcement for reinforced concrete work in 43.02 CUM 8353.00

Columns, pillars, posts and struts for columns UP TO GROUND

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Columns, pillars, posts and struts for FIRST FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Columns, pillars, posts and struts for SECOND FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

14.00 the cost of reinforcement for reinforced concrete work in 50.15 CUM 8353.00

Columns, pillars, posts and struts for THIRD AND TERRACE

FLOOR UP TO CABIN TOP all floor above floor two level

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Beams, girders and cantilever up to floor For GROUND FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Beams, girders and cantilever up to floor For FIRST FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Beams, girders and cantilever up to floor For SECOND FLOOR

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

Beams, girders and cantilever up to floor For THIRD FLOOR

AND TERRACE FLOOR UP TO CABIN TOP all floor above floor

Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in

COPING/LINTEL FOR ALL FLOOR ABOVE FLOOR TWO LEVEL

Providing and Laying Controlled Cement Concrete M-250 and

curing etc. Complete including the cost of form work and

20.00 excluding the cost of reinforcement etc complete in 75.05 CUM 7267.00

R.C.C.slabs for all thickness for up to ABOVE FLOOR TWO

Providing and Laying Controlled Cement Concrete M-250 and

curing etc. Complete including the cost of form work and

21.00 excluding the cost of reinforcement etc complete in 68.64 CUM 7267.00

R.C.C.slabs for all thickness for up to ABOVE FLOOR TWO

Providing and Laying Controlled Cement Concrete M-250 and

curing etc. Complete including the cost of form work and

22.00 excluding the cost of reinforcement etc complete in 84.75 CUM 7267.00

R.C.C.slabs for all thickness for up to ABOVE FLOOR TWO

LEVEL FOR TF AND STAIR CABIN TOP FOR ALL.

REINFORCED CEMENT CONCRETE: Providing and laying

machine mixed, machine vibrated, watertight controlled

reinforced cement concrete M-250 grade. Using 20 mm and

smaller size machine crushed black trap metal aggregate (of

approved size) and well sieved silt-free river sand in all types

and size of structures as shown in drawings including water

stopper between RCC wall, watering placing (pouring),

necessary scaffolding, hoisting, leaving pockets for pipe

flanges, sockets etc.as directed and keeping drip moulds,

grooves, including curing, testing, haking, as per direction

complete. Note: (1) RATES OF REINFORCED CEMENT

CONCRETE WORK SHALL BE INCLUSIVE OF SHUTTERING,

CENTERING BUT EXCLUSIVE OF STEEL REINFORCEMENT FOR

VERTICAL FINN/RCC PADDI.

Providing TMT Bar FE 500 D/500 CRS STEEL reinforcement for

24.00 R.C.C. work including bending, binding and placing in position 73996.03 KG 72.92

complete upto floor two level

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

25.00 and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) 185.07 CUM 4521.82

Conventional for ground floor (BRICK MASONARY) FOR

PLINTH AND GF LEVEL

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

26.00 and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) 78.81 CUM 4521.82

Conventional for FIRST floor (BRICK MASONARY) FOR F.F

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

27.00 and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B) 81.97 CUM 4521.82

Conventional for SECOND floor (BRICK MASONARY) FOR S.F

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1-Cement : 6 -fine sand) (B)

Conventional for THIRD & TERRACE floor U

Half brick masonry in common brunt clay building strength

not less than 35 Kg./Sqcm. In cement mortar 1:3 (1cement :

29.00 coarse sand) with 2 Nos. of 6 mm. Diameter mild steel round 177.61 SQM 697.17

bars after every three coarse embedded in cement mortar for

all floor up to floor two level

Masonary work using Aerated light weight

concrete block having crushing strength not less

than 35 kg/sqcm for super structure above plinth

level upto floor two level in cement mortar 1:5 (

cement : 5 fine sand ) complete as per Technical

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)finished with trowel

including scaffolding curing etc. comp.For all floor above floor

two level ceilings & soffits of stairs

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering

upto floor two level and finished even and smooth in (i)

Cement mortar 1:3 (1- Cement:3- sand) finished with trowel

including scaffolding curing etc. comp.For all floor above floor

two level walls

20 mm thick GUTKA faced cement plaster for OUT SIDE on

walls up to height 12 metres above ground level consisting of

8 mm thick backing coat of C.M. 1:1 (1-Cement : 1-sand) etc.

Providing & laying stone terrazo Wall Texture, with desire

color of finish flakes, including bonding agent, waterproofing

compound, adhesives, etc all complete as per instruction of

Architect and or EIC.

GRID FALSE CEILING :- P&F Perforated ceiling 600 x 600 mm

with grid section (24/15mm) with semi recessed / micro look

joints, NRC : 0.9, Fire resistance : Class-A, as per design, with

35.00 50 mm. rockwool, inclusive of fixing, labour and all other 1578.76 SQM 1697.00

required acessories etc complete as per the company

specifications and guidelines (ECOTONE / GYPROC /

Finishing wall with 100% weather proof EXTERIOR paint of

approved make,brand and shade on wall surfaces (two coats),

with 100% damp proof primer one coats , recessed

/embossed panels, pillars etc., give an even shade after

throughly brushing the surface to remove all the dirt and

remains of loose powdered material. The material shall be as

described in list of approved material.shade and pattern as

design by architect and directed by EIC.

Providing and laying 18-20mm average thick Granite stone

slab flooring cement mortar1:3 (1cement:3coarsesand) laid

over and jointed with grey / white cement slurry with

matching color of stone including half round nosing, rubbing

and polishing etc. complete. shade and pattern as directed by

Architect/enginner in charge.

Providing and laying Mirror finished Polished Kota stone slab

flooring laid over and jointed with grey cement slurry

38.00 including rubbing and polishing with grove cutting , moulding 1320.00 SQM 1009.30

if required as directed & approved by Architect and Authority

etc complete.(A) 25 mm. Thick

Providing and laying River finished polished kota stone slab

25mm thick in Trade and risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-Cement :

coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete.

Providing and laying 60 cm x 120 cm Antiskid Vitrified 8 mm

thick tiles flooring over over 20 mm (average) base of cement

mortar 1:6(1cement : 6 coarse sand) on new surfrace jointed

with colour cement slurry including finishing with flush

pointing and cleaning the surface etc complete shade and

pattern as approved by Architect and

EIC.Asian,Simpollo,Johanson, Swastik & Rak (Premium First

Quality) FOR ALL FLOOR

Providing and laying Ceramic tiles 60*120 6 mm. Thick in

kitchen,toilet and dado on 10 mm. Thick cement plaster 1:3 (1

cement : 3 coarse sand) pointing in white cleaned jointed with

white cement slurry. size, shade and pattern as approved

(matched to flooring) for all floor WALL as design by architect

and directed by EIC

Brick bat waterproofing treatment 100mm average thick in

42.00 CM 1:3 with smooth surface finish and required slop etc, 396.00 SQM 554.00

complete as directed by Architect/Engineer

Providing and laying broken coloured chine mosaic

flooring/Wall Cladding for landscape area fountain

storage using 12 mm to 25 mm broken pieces of colourfull

glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto

surface using white/colour cement/grout including

rounding off junctions and extending them upto

wall,clearing with water and oxalic acid etc. as directed.

WATER PROOF PLASTER: Providing 15 mm thick water proof

cement plaster with first coat of cement mortar 1:4 (1 -

cement : 4 - sand) and over a first coat finishing and

floating coat of neat cement paste mixed with integrated

44.00 water proofing compound in proportion mentioned by 158.10 SQM 241.00

manufacture including necessary scaffolding, curing etc.

complete for all floors.(NOTE: This plaster is to be applied

in toilet block floors, chhajja tops, underground water

tanks etc.) To be measured in SQ.MTS.

Providing corrugated G.I. sheet of class-3 roofing fixed

with glavanished iron J or L Hooks, Bolts and nuts 8mm

diameter with bitumen and G.I. limpet washer or G.I.

limpet washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

Applying two coats of Birla (white cement based) or Asian

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall/ceiling

surface to give an even shade including thoroughly brushing

the surface free from mortar dropping and other foreign

matter and sand papered smooth.

Wall painting ( three coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth. on walls shade and pattern

as design by architect and directed by EIC.

TOP SOIL: Supplying and spreading in position 150mm thk

layer of good approved redsieved soil including levelling,

watering, consolidation by manually or mechanically(which

48.00 ever convenient at site) at every 50mm thik layers, cost 113.39 CUM 368.00

including of allmaterials, labour and other charges required to

complete and as directed by the

Engineer In charge

Providing, supplying, laying and planting like

champa,kadam etc trees suggested area with necessary

49.00 garden soil required for trees, curing, requiredmanure, for 30.00 EACH 2505.00

soil bed etc. complete at all level, between 7 ft to 9 ft

heights as design and directed by ARCHITECT.

Providing, supplying, laying and planting different kinds of

plants, shrubs and lawnsareain suggested area with necessary

50.00 garden soil required for plants, curing, requiredmanure, 188.98 EACH 793.00

forflower bed etc. complete at all level, heights as design and

directed by ARCHITECT.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,45cm height and

51.00 15cm thick of M250 grade concret as per approved design and 159.50 RMT 264.00

including excavation for fixing in proper line and level,filling

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I.Cover with frame of

mm x 300 mm size (inside) with standard weight. 100 m x

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35 kg. Cm² in C.M. 1:5 C.I. cover with

frame (Light duty) 455 mm x 610 mm internal dimensions,

total weight of cover with frame to be not less than

kg.(Wt. of cover 23 Kg.) and (Wt. of frame 15 Kg.) R.C.C. top

53.00 slab with 1:2:4 mix (1-cement :2-coarse sand : 4- graded stone 5.00 EACH 2903.89

aggregate 20 mm size) foundation concrete 1 :5 :10 inside

plaster 15 mm thick with cement mortar 1 :3 finished smooth

with a floating coat of neat cement on walls and bed concrete

(A) Inside dimensions 500 mm x 700 mm and 450 mm deep

for pipe line with one or two inlets.

Providing and constructing Sewer manholes, scraper

manholes and unit house connection chamber, as per the

type design in brick masonary in C. M. 1:3 ,inside and outside

lastering in C. M. 1:3 necessary coping in R.C.C.M. 200 fixing C.

I. steps and fixing manhole frame and covers (But excluding

supply of manhole frame and covers) over manholes and

house connection chambers and fixing Manhole covers (but

excluding supplying of manhole covers) over scraper manhole

etc. complete, providing and fixing safety chain wherever

necessary as per the stipulations in the type desing complete

(excl. excavation). Manhole type "A" circular type having

inside diameter of minimum 1200 mm and for depth from

M to 1.50 M (for 150 mm to 500 mm dia sewers). Manhole

type "A" as above but up to 1.0 M depth.

Providing and fixing 35 mm thick shutters for Doors,

windows and clerestory windows including Indian teak

55.00 cm x 7 cm. size including anodized alluminium fixtures 87.36 SQM 5285.45

and fastenings including primer coat of approved quality

coats of oil painting etc, complete. (ii) Fully Panelled.

Appliying priming coat over new wood and wood based

surface after and including preparing the surface by

56.00 throughly cleaning oil, grease, dirt and other foreign 218.40 SQM 44.20

matter, sand papering and knotting. (B) Ready mixed

paint brushing wood primier pink.

Painting two coats (excluding priming coat) on new wood

and wood based surface with enamel paint, interior to

57.00 give an even shade including cleaning the surface of all 218.40 SQM 95.00

dirt, dust and other foreign matter sand papering and

Providing,Making, Fabricating, Eracting with Fixing M.S.

Fabricated Structure as per design, , m.s flat , M.S.box

pipe, M.S. round dia pipe M.S.Hollow Pipe top cover as per

design (square/round), M.S. polished square and round

shape as per design,MS angle & GI Concertina coil wire

for fencing, M.S Polished flat with making required size

hole at required spacing as design by architect and

directed by EIC.and hold fast with coach bolts & required

fitting including all as per drawing etc. complete.as design

by architect and directed by ARCHITECT.

Providing and fixing sheet glass, selected quality (Type-C)

bedded in putty and fixed with wooden beading including

the cost of wooden beadings of first class teakwood and

necessary cutting of glass. (2) 6 mm thick.

Applying priming coat over new steel and other metal

surfaces after and including preparing the surface by

thoroughly cleaning, oil grease, dirt and other foreign

matter and scoured with brushes fine steel wool, scrapers,

and sand paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat) on

new steel and other metal surfaces with enamel

61.00 paint, brushing interior to give an even shade including 1589.92 SQM 93.46

cleaning the surface of all dirt, dust and other foreign

Providing and fixing C.P.V.C. water supply pipes schedule

pipes confirming to ASTM F-441 for hot as well as cold water

supply with necessary fitting like Tee, Elbows, Union, coupler,

etc. in walls as well as floors concealed in walls and finishing

the wall with cement mortar to give each finish of brands like

Astrl or Finolex. Complete with necessary scaffolding at all

(A) 15 mm Ø C.P.V.C. pipes.

63.00 -Do- (B) 25 mm Ø C.P.V.C. pipes. 100.00 RMT 251.31

64.00 -Do- (C) 32 mm Ø C.P.V.C. pipes. 100.00 RMT 334.89

65.00 -Do- (D) 40 mm Ø C.P.V.C. pipes. 100.00 RMT 443.29

Providing and fixing concealed center point to wall ceiling

& floor CPVC (SDR 13.5) PIPE having National Sanitation

66.00 Foundation (NSF) seal for potable water of following dia. 200.00 RMT 654.04

nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc.complete. [F] 50mm.

Providing and fixing in position C.P.V.C. Ball valve confirming

67.00 to ASTM F-441 to water supply line. (A) 25mm Ø C.P.V.C. Ball 10.00 EACH 481.00

68.00 -Do- (B) 32 mm Ø C.P.V.C. Ball valve. 5.00 EACH 539.00

69.00 -Do- (C) 40 mm Ø C.P.V.C. Ball valve. 5.00 EACH 597.00

Providing and laying to level and slope` under ground

70.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 25.00 RMT 390.00

outer and inner solid P.V.C. (A) 110 mm Ø 3.2 mm thick.

Providing and laying to level and slope` under ground

71.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 25.00 RMT 579.00

outer and inner solid P.V.C. (B) 160 mm Ø 4.7 mm thick.

Providing and laying to level and slope` under ground

72.00 drainage/sewerage U.P.V.C. 'Foam Core' pipes with 3 layer 10.00 RMT 730.00

outer and inner solid P.V.C. (C) 200 mm Ø 4.7 mm thick.

PProviding and fixing washbasin with single hole for pillartap

with C.I. or M.S. brackets painted white includingsutting holes

73.00 and making good the same but excluding fittings.(A) Vitreous 21.00 EACH 1505.90

China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour

Providing and fixing C.P. Pillar cock 15 mm Heavy duty swan

neck with flange and wall flange of make like Jaguar, ESS ESS,

Cera (to be provided for water tubes in no.) C.P. Pillar cock

mm Heavy duty swan neck

Providing and fixing Urinal of approved quality

includingconnection with trap and with integral

longitudinal flush pipe complete set (unit) including

connecting the whole unit with water supply and

drainage.(in nos.) .(A) Squating plate pattern white

earthenware 550mm x 300mm.

Providing and fixing wash down water closet (European type,

W.C. Pan) with integral P or S trap including jointing the trap

with soil pipe in Cement Mortar 1:1 (1-Cement : 1- fine sand)

76.00 (A) vitreous China Pattern :(i) in white colour (all C.P. fitting of 18.00 EACH 1343.38

approved brand like Jaguar, ESS ESS or Cera) complete set

(unit) including connecting the whole unit with water supply

and drainage.(in nos.)

Providing and fixing chromium plated brass half trun

77.00 flushcock of approved quality including fixing in pipe line 18.00 EACH 261.16

etc.complete.(ii) 25mm dia

Providing and fixing self closing press matic bib cock with

78.00 flange and wall flange of make like Jaguar, ESS ESS, Cera (to 27.00 EACH 1584.00

be provided for water tubes in no.)

OVER HEAD PVC WATER TANK : Supplying, lifting and

installing in position, PVC water tank 'EURO' or equivalent

having cross section of tank wall having outer coloured layer,

U.V resistant layer, insulating layer and anti bacterial inner

layer. Cost including transporting, labour and making

necessary connection for inlet, outlet, linkage, overflow, wash-

out, etc.with required platform etc. as directed by engineer in

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

80.00 screaed down or higned grating including cost of cutting and 30.00 EACH 645.09

making good the walls and floor 100mm inlet and 50mm

outlet.(C) 100mm dia.

Applying Anti corrosve Chemical treatment Food Grade epoxy

for water retaining structure including cleaning the surface

thoroughly & making surface dry. Even & smooth for applying

treatment and coats.DCL1400 with 3 years Guarantee.

Providing and applying a protective and waterproofing

coating of approved quality [Bituminous Paint/Bitumen

Emulsion/Bituminous Mastic] conforming to IS: 158 (or

82.00 relevant IS code) on the external surface of the Reinforced 206.00 sqm 189.00

Cement Concrete (RCC) water tank, including all necessary

surface preparation, cleaning, and application of two or more

coats as specified by the engineer-in-charge, complete

83.00 JCB machine rental work at the site of excavation or cleaning 16.00 hour 1400.00

Supply, Installation, Testing and Commissioning of

Electric driven fire pump suitable for

automatic/manual operation and consisting of

following: complete in all respect as required.

a) Monoblock pump & DIESEL PUMP SET to ensure a

minimum pressure of 3.5 kg / sq.cm. at highest and

farthest outlet at specified flow of 1620 Lpm at 60 m.

head conforming to IS standards B) 180 LPM

JOKEY PUMP (3 NO PUMP TOTAL)MAKE-

Supplying, Installation, Testing and Commissioning of

Control Panel suitable for automatic/manual operation of

fire fighting pumps consisting

(a) Necessary cabling, wiring, earthing from panel to

85.00 individual equipment shall be included in the quoted price. 1.00 Set 38000.00

(b) Facility for more selections i.e auto or manual.

(c) Protection failure and control cabling.

(d) interlocking of pressure switch with pumps

(e) soft starterMAKE-L&T

Supply, Installation, Testing and Commissioning of 150 mm

dia Pressure Gauge of range 0 - 16 Kg / cm² conforming to IS -

3624 having bourdon tube of stainless steel 310 in cast

aluminium, stove enameled, black, weather proof case with

86.00 outer, screwed aluminium bezel and complete with 1.00 No. 1250.00

necessary U-type stainless steel siphon tube and cock

including providing suitably painted angle iron support

to the tube etc.as per specification

complete as required.MAKE-H.GURU

Supply, Installation, Testing and Commissioning of the

following sizes of flange jointed / screwed / welded, G I Pipes

of Class C (Hevy class) ISI marked including accessories such as

MS bracket, U clamps with Anchor fasteners, tees / elbows /

reducers / couplings / unions / bends / flanges etc., and

laying on the surface including painting with one coats of

anticorrosive primer and one coats of approved red enamel

paint after laying and testing after Installation etc. as per

specifications complete as required.a) 150 mm dia.MAKE-

ASIAN/JINDAL/SURYA

Supply, installation, testing and commissioning of C.I.

Butterfly valve (PN 1.6) with

flanges, nut bolts, gaskets complete as required.(A) 100 mm

dia MAKE- SANT/L.P./ISI

Supply, Installation, Testing and Commissioning of NON

94.00 RETURN VALVE. NRV 3.00 Nos. 4200.00

Supply, installation, testing and commissioning Single

Headed Fire Hydrant Valve with 80 mm N.B. flanged inlet,

63 mm dia female instantaneous outlet type. S.S. coupling,

95.00 blank cap, chain, twist release type lug & all accessories 5.00 Nos. 4500.00

Conforming to IS:5290. Including fixing with supports, flanged

tapping from wet riser, orifice plate complete as required

by the Local Fire Authority.MAKE- ALEX/SAFEP/PROTECTO

Supply, Installation, Testing and Commissioning of Weather

proof Standard MS Fire Hose Cabinet wall mounting type (450

mm x 600 mm x 250 mm deep) having single opening with

96.00 necessary locking arrangement by allan key suitable for 5.00 Nos. 1500.00

housing 1 no. hose pipe,

1no. Branch pipe & nozzle spanner.MAKE-

ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning non-

percolating rubber reinforced lined fire Hose pipe (as per IS :

636) of 63 mm dia and 15 mtrs long. The hose shall be rated

for burst pressure of 35.7 Kg/sqcm. Hose shall be

complete with ISI marked SS male & female coupling

(IS:903) bound & riveted to hose pipe with SS rivets & 1.5 mm

SS wire.MAKE- ALEX/SAFEP/PROTECTO

( RATE 1 NOS HOSE PIPE)

Supply, Installation, Testing and commissioning of 63 mm dia

instantaneous pattern COM SS short branch pipe, 20 mm

98.00 dia nozzle conforming to IS 903, suitable for inter 5.00 Nos. 1200.00

connection to hose pipe coupling complete as required by

the Local Fire Authority..MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning of First Aid

Hose Reel equipment conforming to IS:884 comprising of

hose reel drum, 8 mm shut off nozzle, Rubber hose reel

99.00 tubing as per IS: 444 of 25 mm dia x 30 mtr. long, painting, 5.00 Nos. 4300.00

Manual fix type with fixing bracket, anchor fastener, bolts &

nuts etc. complete as required by Local Fire

Authority.MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning of SS Ball

a) 25mm dia.MAKE- ALEX/SAFEP/PROTECTO

Supply, installation, testing and commissioning of Cast lron

Two Way Fire Brigade Inlet as per IS: 904 having 63 mm dia

101.00 inlet with blank cap and chain with necessary fittings, 1.00 No. 4500.00

flanges, nut bolts etc. complete as required..MAKE-

Supply, Installation, Testing and Commissioning of Gun Metal

102.00 Air Release Valve with 1.00 Nos. 1400.00

necessary fittings. Size: 25 mm (For Riser).MAKE- SANT

Supply, installation, testing and commissioning of

103.00 PRESSURE switches to each internal 3.00 Nos. 3200.00

hydrant valve with required accessories..MAKE- ISI

Supply, installation, testing and commissioning of XLPE

insulated copper Cable from each switches to Panel with all

necessary accessories.

Providing and fixing of Manual Fire Alarm system as

per requirement and specification consisting of

following items

a) Manual call point (FR-Polymer)MAKE- ASES/AGNI

106.00 b) Hooters (FR-Polymer)MAKE- AGNI 5.00 Nos. 800.00

c) Cable & other accessories: C XLPE insulated

copper MAKE- ISI

108.00 d) Manual Fire Alarm Panel 8 ZONE MAKE-ASES/AGNI 1.00 Nos. 6500.00

Supply, installation, testing and commissioning of Carbon

Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm to

109.00 IS:15683, with ISI marked / TAC approved fitted with 5.00 Nos. 5100.00

required accessories including wall suspension

brackets.MAKE- KIAAN/ISI

Supply, installation, testing and commissioning of ABC type

kg confirm to IS:15683,

with ISI marked / TAC approved fitted with required

accessories including wall suspension brackets.MAKE- ISI

111.00 FSPA AND NOC CHARGE MAKE- ISI 1.00 Nos. 35000.00

112.00 SMOKE DETECTOR MAKE- ISI 43.00 Nos. 1150.00

"Supplying, Erecting, Testing & Commissioning the passenger

lift having following main features: 4/5/6 Passengers, Ground

plus 2 upper floor with Rated Speed of 1.0 m/sec, (A) With

General Specification attached herewith. Cat.II NOTE: Before

113.00 Quoting Rate for this Item of Lift, beader shall check 1.00 EACH 855000.00

Describption, specifications and instructions pertaining to this

Item of LIFT in Special Terms & Conditions." incl. 5 year

maintenance contract and approved make like omega, techno

and trio or equivalent as per vendor list."

Providing, supplying, fabricating and installing cafeteria

platform and built-in modular furniture of height 800 mm

comprising waterproof BWP plywood (Century / Euro or

equivalent approved) cabinets for cooking and serving

platforms, including drawers and shutters. Carcass made of

mm BWP plywood, internal surfaces finished with 0.8 mm

white laminate and external surfaces finished with 1.0 mm

114.00 laminate of approved make, with hardwood edge lipping and 1.00 EACH 75800.00

melamine polish. Providing granite top 20–25 mm thick with

edge moulding and polishing, including fixing. Providing and

fixing SS sink 600 × 450 mm of Nirali make. Providing

telescopic drawer channels and concealed hinges of approved

make. Including space provision for refrigerator, all materials,

labour, hardware, transportation and fixing complete as per

drawings and directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing circular table of

1.20 metre diameter and standard height 750–800 mm,

comprising mild steel frame fabricated from 40 mm × 40 mm

× 2.5 mm thick box sections, including circular rolled

members, legs, stiffeners, cutting, welding, grinding smooth

and proper alignment. All metal components finished with

powder coating of approved colour and shade including

115.00 surface preparation, pretreatment and curing. Providing and 9.00 EACH 13000.00

fixing full body vitrified tile top of 10–12 mm thickness, cut to

circular shape, of approved make such as Marfil Tiles /

Simpolo Ceramics or equivalent, fixed over metal frame using

approved tile adhesive / epoxy. Including all materials,

labour, fasteners, adhesives, transportation and fixing

complete as per drawings and directions of Engineer-in-

Providing, supplying, fabricating and installing library book

stack – single face type, with overall height 2285 mm, main

unit width 935 mm and depth 350 mm, having 7 adjustable

shelf levels. Rack comprising CRCA steel shelves (20 gauge),

brackets and bracings (16 gauge) with uprights (16 gauge),

and side/end panels made of CRCA mild steel sheet 22 gauge,

duly pressed and stiffened. All metal components powder

coated in Ivory colour. Including bolts, nuts, shelf supports,

levelling bolts, transportation and fixing complete as per

directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing library book

stack – double face type, with overall height 2285 mm, main

unit width 935 mm and depth 550 mm, having 14 adjustable

shelf levels (7 levels on each side). Rack comprising CRCA

steel shelves (20 gauge), brackets and bracings (16 gauge)

with uprights (16 gauge), and side/end panels made of CRCA

mild steel sheet 22 gauge, duly pressed and stiffened. All

metal components powder coated in Ivory colour. Including

bolts, nuts, shelf supports, levelling bolts, transportation and

fixing complete as per directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing metal

magazine display rack of size 1440 mm (W) × 1980 mm (H) ×

400 mm (D), made of mild steel frame using MS square /

rectangular sections and CRCA steel sheet magazine pockets

and partitions. Magazine pockets and dividers made from

CRCA steel sheet 20 gauge, side and back panels made from

118.00 CRCA steel sheet 22 gauge, including welded construction, 5.00 EACH 15600.00

grinding smooth and proper alignment. Providing base frame

with levelling pads. Providing powder coating of approved

colour and shade including surface preparation, pretreatment

and curing. Including all materials, labour, welding rods,

fasteners, transportation and fixing complete as per drawings

and directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing kids magazine /

book display rack of curved shape with approximate arc

length 4.50 metres, suitable for children access, having overall

height about 1200 mm and depth about 400 mm. Rack

fabricated in curved profile using mild steel frame sections

and CRCA steel sheet magazine pockets and partitions.

Magazine pockets and dividers made of CRCA steel sheet

119.00 gauge, side and back panels made of CRCA steel sheet 22 13.50 RMT 8500.00

gauge, duly pressed, bent and stiffened to required radius.

Providing base frame with levelling pads. All metal

components finished with powder coating of approved child-

friendly colour and shade, including surface preparation,

pretreatment and curing. Including all materials, welding,

grinding, fasteners, transportation and fixing at site, complete

as per drawings and directions of Engineer-in-Charge

Providing, supplying, fabricating and installing curved library

book rack of full height 2285 mm, total curved length

metres, fabricated from CRCA steel with uprights and bracings

in 16 gauge, shelves in 20 gauge and side/end panels in

gauge. Rack having adjustable shelves as per standard library

120.00 configuration, duly rolled/bent to required curvature, 10.00 RMT 11000.00

including all welding, stiffeners, bolts, nuts, shelf supports

and levelling arrangements. All metal components powder

coated in Ivory colour including surface preparation,

pretreatment and curing. Complete as per drawings and

directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing metal frame

table of size 3000 mm × 800 mm × 800 mm height, made of

mild steel box section 40 mm × 40 mm × 2.5 mm thick,

comprising 4 Nos. of 3000 mm length members and 13 Nos. of

800 mm length members, including cutting, welding, grinding

smooth and finishing. Providing one coat of metal primer and

two coats of synthetic enamel paint of approved shade.

Providing and fixing artificial stone table top of size 3000 mm

× 800 mm × 12 mm thick, of approved make (Kalingastone,

Johnson Marble & Quartz, Relay Stone, and Quantra Quartz)

and shade, fixed over metal frame using approved adhesive /

mechanical fixing, including all materials, labour, tools,

transportation and fixing at site, complete as per drawings

and directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing metal

frame table of size 1.80 m × 1.20 m, fabricated from mild

steel box section 40 mm × 40 mm × 2.5 mm thick,

comprising 0.80 m length – 4 Nos., 1.20 m length – 5 Nos.

and 1.80 m length – 5 Nos., including cutting, welding,

grinding smooth and alignment. Providing powder coating

122.00 of approved colour and shade, including surface 20.00 EACH 15350.00

preparation and curing. Providing and fixing full body

vitrified tile top of size 1.20 m × 1.80 m of approved make

such as Marfil Tiles / Simpolo Ceramics or equivalent, fixed

over metal frame using approved tile adhesive, including

all materials, labour, tools, transportation and fixing at site,

complete as per directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing reception table

of size 4.50 m length × 0.60 m width and 0.80 m height, with

front raised writing platform for visitors. Carcass made of

mm BWP / waterproof plywood (Century / Euro or equivalent

approved brand), internal surfaces finished with 0.8 mm

white laminate and external visible surfaces finished with

123.00 mm decorative laminate, with hardwood edge lipping and 3.00 EACH 106200.00

melamine polish. Providing seamless 8 mm thick Corian solid

surface top including raised writing ledge, with chemical

jointing, sanding and polishing to achieve seamless finish.

Including decorative front paneling, all materials, labour,

adhesives, fasteners, transportation and fixing complete as

per drawings and directions of Engineer-in-Charge.

Providing, supplying, fabricating and installing Y-shaped

collaborative table of approved design as per drawings,

comprising three arms of approx. 1270 mm length each with

curved outer edges. Table frame fabricated from mild steel

box section 40 mm × 40 mm × 2.5 mm thick, including straight

and curved members, central junction supports, cutting,

welding, grinding smooth and proper alignment. All metal

components finished with powder coating of approved colour

and shade including surface preparation, pretreatment and

curing. Providing and fixing full body vitrified tile top of 10–12

mm thickness, cut to Y-shape with curved edges, of approved

make such as Marfil Tiles / Simpolo Ceramics or equivalent,

fixed over metal frame using approved tile adhesive / epoxy.

Including all materials, labour, welding rods, fasteners,

adhesives, transportation and fixing at site, complete as per

directions of Engineer-in-Charge.

High back chair with Swivel tile mechanism (revolving,

back height more than 24") 5 leg revolving fabricated

stand to be made from 40 x 20 x 16 CRC powder coated

sections, excell P.P. Cushion Arm , Gas Lift nylone Base

Leatherite fapestry as per selection of EIC ( Greeken

Modal no. 224 A)

Visitor's Chair (Non-Revolving, back height 17")

fabricated pipe stand CRC powder coated sections,

excell P.P. Cushion Arm , Leatherite fapestry as per

selection of EIC ( Greeken Modal no. 226 A)

Providing and fixing full-height office partition from

finished floor level up to false ceiling / slab, partly opaque

and partly glazed, using 50 mm × 50 mm aluminium

hollow box section framework (minimum 2.0 mm thick)

fixed to floor, ceiling and walls, cladding opaque portions

on both sides with 12 mm thick MR grade plywood

conforming to IS 303 of approved make such as Greenply

/ Century / Kitply or equivalent, finished with 1.0 mm thick

decorative laminate conforming to IS 2046 of approved

make such as Merino / Greenlam / Royale Touche or

equivalent, providing 19 mm thick seasoned wooden

border finished with melamine polish at all exposed

edges, corners, junctions and door frames, fixing 10–12

mm thick toughened glass conforming to IS 2553 of

approved make such as Saint-Gobain / AIS / Modiguard

or equivalent in aluminium glazing channels with EPDM

gaskets and silicone sealant, including provision for door

openings, service cut-outs, all labour, materials, tools,

scaffolding and incidentals, complete as per drawings

and directions of Engineer-in-Charge.all door inside use

floor spring and all assesarary. no extra payment for door

inside use floor spring and all asseary.

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling

complete. Cat III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step

type electronic fan regulator mounted and

accessories with earth continuity of following type

erected on PVC / Metallic/Wooden box, single

mounting base frame covered with

textured/metallic/white front plate modules erected

on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.(f)

with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete.Cat III

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

accessories.[II] For 16A Plug and 16 amp switch with

2-2.5 sq.mm Cu. Wire from mcb db board.(f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat III.

Point wiring for on board Looped Plug with 6A

Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate

modules erected on / in wall / ceiling with following

type accessories. Cat III.

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured /

132 metallic/white front plate , modules erected with 63.00 Each 344.00

necessary connections as per site situation directed

by Engineer In charge(13) 6A/10A/16A/20A/25A/32A

Single pole Modular MCB Switch. Cat III.

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular

Providing & laying approved make ISI marked HDPE 6Kg

/ cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected

134 at road crossing on or floor as directed for laying of cable. 300 Rmt 190.00

The pipes as following size of dia & weight per 6 mtr.(b)

Supplying and erecting Flexible PVC insulated multi strand

multi core 1.1 kv grade ISI marked copper wires of

following size to be erected as directed.(k) 4.00Sq.mm

core round PVC sheathed

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Aluminium conductor for 1.1 KV.

136 to be laid on wall with necessary clamps or in existing 200 Rmt 160.00

trench / pipe of following size of cables(C) 4 core 10 Sq.

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size (A)

With medium class Rigid PVC pipe and

accessories(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size(A)

With medium class Rigid PVC pipe and

accessories(b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe

to be erected in / on wall / ceiling with 2.5 sq. mm copper

139 conductor FRLS PVC insulated stranded wire of green 300 Rmt 123.00

colour for earth continuity of following size (a) with

medium class Rigid PVC pipe and accessories(a) 2 wire

supplying and erecting sheet steel powdercoated cable

and termination box to be mounted on top or bottom of

140 the m.b.b.distribution box for housin/ covering extra wires 6 each 930.00

and cables suitable for followingsize of m.c.b. db box.

Three phase double 12way double door.

S.I.T.C. submersible pump set suitable for bore of 100 mm.

dia. or more having three phase motor capacity not more

than 5 H.P. with following capacity . Lifting and Lowering

taken extra. (A) (25 stage) 120 to 125 LPM discharge at

to 120 mtrs. head respectively suitable for 50 mm dia.

Supplying and erecting Direct on line starter with 30 Amp.

(resistive @ 230v) power relay and with 2 to 5/ 4 to 10 / 8 to

20 amp. Range C.T. Operated electronic overload relay in

engineering grade plastic enclosure for 3 ph 415v 50 HZ

A.C. motor up to 7.5 HP with high voltage protection

(above 480 v) and under voltage protection (below 330 v)

142 current sensing single phasing protection. Reverse 1.00 each 2532.00

phasing protection, inverse current characteristic

overload protection with indication for On, OL, HV,LV SPP

in a single unit with feather touch start / stop push button,

high temperature with standing Bakelite terminals

complete erected on P.W. Block with necessary

connection. [Cat.II]

Supplying & erecting in earthpit of minimum bore dia.

225mm size ASH or approved make Safe Earthing

Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free G.I.Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with

143 constant ohmic value surrounded by highly conductive 1.00 each 12375.00

compound with high charge dissipation suitable for panel

earthing.[A] For electrical installation up to 440 V (c) For

Electrical Installation covering Transformer Neutrals,

Lightning arrester Earthing, A.C.Plant & Sensitive Computer

System(like Automation, SCADA) i.e independent Earthing

in normal soil. Length of Pipe : 2.00 mtrs Back filling

Compound :2 nos Bags of 25 Kg.

Providing one bag of 25 Kg. Additional Back Filling

Compound (BFC) suitable for safe earthing device.

Providing and erecting Pipe type earthing having

cms.long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA

and Short Circuit withstand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V,50Hz. having

characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component

for following Max. rating erected as directed. (ii) 40Amps.

providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free

fire retardant insulated copper conductor, insulated wire

(HRFR) conforms to IS-694, erected in existing pipe with

1.5sq. mm copper conductor of same specifications for

earth continuity of following size. (a) 3 core 1.5 Sq. mm

148 -Do- 3 core 2.5 Sq. mm 50.00 RMT 101.00

149 -Do- 3 core 4.0 Sq. mm 50.00 RMT 139.00

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on 3 phase and neutral

150 415V,50Hz. having characteristic of quick action & 1.00 EACH 4272.00

tripping with all advance feature & do not incorporate

any electronic component for following Max. rating

erected as directed. 100 Amps FP (100 mA Sensitivity)

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite magnet

Motor, class of insulation: B, Rust free

nos.Aluminium blades, 2 nos. canopies, shackle kit with

earthing provision, 22 gauge copper winding, Power

factor not < 0.9, Service Value (CMM/W) minimum

6.85, Air delivery minimum 215 CMM, 350 RPM,230v

151 (tolerance as per IS : 374-2019), THD < 10%, remote 50.00 EACH 3370.00

or electronic regulator unit for Speed Control and all

remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit

with surge, over current and overload protection ,

Hz, Single phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in

Charge] B) 1200 mm Sweep (48")

Supplying and erecting LED indoor CELLING LIGHT ULTIMA

SLIM 2' X 2' 36W RECESS MOUNT 2 X 2 PANEL Indoor

LuminaireTechnical Specifications Operating Temperature

-10 to 40 Rated Input Voltage & Frequency 230 VAC,

50Hz Rated Input Wattage 36W ± 10% Rated Input Current

0.165 (Nominal)

Power Factor ≥0.90 ATHD <10% Rated Luminous Flux

lm / 3780 lm / 3600 lm (tolerance as per BIS) Rated

Luminaire Efficacy 110 lm/W / 105 lm/W / 100 lm/W

(tolerance as per BIS) Correlated Color Temperature (CCT)

6500 K / 4000 K / 3000 K (tolerance as per ANSI)

Color Rendering Index (CRI) >80 Ra Beam Angle 120°

(within the permissible limits) Driver Efficiency ≥85%

LED Life Span >50000 Hrs (Ta=25 @L70) Housing CRCA

Housing with White Powder Coating Lens / Reflector PC

Diffuser Mounting Recess etc complate.make-jaquar

EDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium

casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

153 Luminaire efficacy> 85 lumens/watt , 35.00 EACH 688.00

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Square/ Circular

shaped Surface/Recessed Mount Downlight with provision

for spring loaded mounting clips complete.IP20(iii) 16-20

watts, Surge-2 KV cat.iii

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Tube Light with

integral driver(v) 36-40 Watts, Surge-2 KV, IP-20,

conventional 4 feet cat III

(D) LED Strip Light (ii) Minimum 7.2W -240 LED per meter,(2

wire, IP-65) with non integral suitable Driver complete

(E) Under Water Light,12V DC including Driver,IP-67 with

156 die-cast/deep drawn housing with impact resistance 31.00 EACH 1205.00

clear toughened glass. (ii) 12 watts cat.iii

157 (F) Spot Light 425 Lumens, Surge-2KV(ii) 8 to 11 Watts cat iii 35.00 EACH 1597.00

Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS body

with inbuilt lowers & square frame.200mm with 1350RPM

Supplying & erecting approved make Four Pole 415V

Motorised Automatic transfer switch including controller

with UV/OV, phase sequence, single phasing and

frequency protection interior for panel mounting with

operating mechanism A.C.23A duty confirming to IS for (F

Providing and erecting busbar chamber confirming to IS-

375 fabricated from 16 G.M.S. sheet, dust & vermin proof

having hinged door with rubber gasket and necessary

busbar supports with Aluminium busbar having current

density not more than 0.8 Amp. / sq.mm (Rated current /

160 cross section area) duly wrapped with colour insulation 1.00 EACH 6720.00

tape for phase sequence, three phase & neutral each

Suitable for following current capacity with necessary

painting mounted on wall or pedestal frame of required

size with necessary connections.(D) Suitable for 400 Amp.

Providing and erecting Sheet Steel powder coated

Vertical MCB distribution board (VTPN) - flush /

surface mounted double door (IP54) fitted with

insulated copper busbar, isolated neutral link, earth

161 bar and DIN rail, confirming to IS 13032 and BS 5486- 3.00 EACH 18480.00

1986,IP-54 suitable for 250 AMP TPN MCCB +

RCCB as incomer and three phase outgoing as per

following .(The DBs should be used of same company

of MCB to be used) (D) 12 way outgoing

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

162 high pressure tool & connected to switchgear terminals 25.00 EACH 8.00

with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/2.5 to 6 Sq.mm for 2.5sqmm

Supply, Installation, testing and commissioning of

Computer System with UPS system for Surveillance and

Monitoring - Pentium Core i5 with up to 4.70Ghz CPU

speed, minimum of 8 GB RAM, up to 24MB cache,

163 52X32X52X CDRW Drive & 2TB HDD, optical Mouse, 106 1.00 EACH 40000.00

keys keyboard,Mouse, 2 nos. 10/100 Mbps Ethernet card

,USB connection & internal modem, 17" colour graphics TFT

monitor & Original Windows 11 and anti-virus software

loaded. (Dell/Lenovo/HP)

SITC of 4 Megapixel up to 20 meter IR IP66 ,Varifocal

,Water Proof outdoor type Bullet IP netwrok Camera : Up to

4 megapixel high resolution Full HD1080p video Dual

stream with 4mm lens - 3D Digital Noise Reduction3-axis

adjustment DC12V Support H.265+ with all required

Supply, Installation, Testing & Commissioning of 16 port

Supply, Installation, Testing & Commissioning of 24 CH port

Supply, Installation,Testing & Commissioning of 16 TB Hard

Supply, Installation,Testing & Commissioning of 4U Rack

With Required Accessory. Outdoor or Indoor

Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C] CAT -

170 Supply and Installation of HDMI CABEL. 25.00 RMT 120.00

171 Junction box for CCTV Camera 31.00 nos 275.00

Point wiring for independent PLUG with following size

mains earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires upto 10 mt length, in following below of pipe

erected complete with ISI marked 3 / 5 Pin socket and

tissino type switch erected with earth continuity

connection erected on Metal / PVC/Wooden box

covered with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet. [C] 6/16A Plug and 16 A switch

with 2-4 sq.mm Cu. Mains with 2.5 sq.mm ( green) earthing

wire(a) with medium class Rigid PVC pipe and accessories

erected flushed on wall/ceiling complete

Add Labor Cess 0.01