Aluminium Partition work, ACP work, GI sheet and misc. other civil work at newly hired Nari Sdn office under Bhavnagar Rural Division.

Name of work :- Aluminium Partition work, ACP work, GI sheet and misc. other civil work at newly hired

Nari Sdn office under Bhavnagar Rural Division.

Description Rate (Rs.) Per Amount (Rs.)

Demolition of Brick work and stone masonry including stacking of

1 serviceable materilas and disposal of unserviceable materials with all 5.00 570.59 Cmt

lead and lift.(ii) In Cement Mortar.

Demolition including stacking of serviceable materilas

2 and disposal of unserviceable materials with all lead and 1.00 1097.15 Cmt

lift. (i) R.C.C. work

Providing & fixing fittings in position fully glazed aluminium (alloy -

HE - 9 WP ) frame partition using aluminium 'c' section in the

dimensions of 23.6mmx21.8mm to be used for top, bottom and side

ends aluminium 'H' sections in the dimensions of 23.6x60mm outer

dimensions to be used for intermediate support, the vertical &

horizontal members to be joined and with concealed aluminium angle

cleat panel to be made from 5.5 mm thick HB4 or "Triveni" make plain

glass fixed with glazing clip rubber gasket with aluminium bedding of

required size incl. all fixtures & fastenings as per drawings & details

with door of required size with similar aluminium framing material etc.,

complete with rubber on all four side for air tight fitting incl. all

fixtures & fastenings as directed by E.I.C.

Providing and fixing window having extruded aluminum Colour

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt

1.094 Kg / Rmt, horizontal two track member size 61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size 61.85 mm

x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding shutters of

4 horizontal member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, 4.00 1696.73 Smt

vertical member of size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

@ Wt. 0.457 Kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window.

Providing and fixing fully glazed/partly glazed Single door shutter

made, frame of 10.15cmX4.45cm aluminum section, and Shutter-Top

& vertical section of 8.5cmX4.45cm size and bottom section of

11.40X4.45cm size, using 5mm thick "TRIVENI" or HB4 plain glass

glazing deep rubber gasket with locking arrangement, all fixtures &

fastening of anodized section with all labours & materials etc. complete

as per drawing & as directed by EIC Complete as per drawing and as

directed by E.I.C..

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M.

6 1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray 6.00 2104.20 Smt

cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead

paint. (A)In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip and

jack rafters, purlins conneted to common rafters and the like and two

coats of oil paint

Providing & Fixing corrugated G.I. sheets roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

8 bitumen and G.I. limpet washer. filled with white lead complete- 60.00 656.00 Smt

excluding the cost of purlins, Rafters and Trusses. 0.60MM THICK (24

Providing & fixing of wall cupboard shutters using 18MM plywood

with Wood Framing size of 25 x 35 mm, decorative laminate of

approved shade & brand on front side and backside with white

laminated sheet. Including finishing with beading patti and polishing

the same. Fixing of door with hinges, one number of magnet and door

handle on each door and one number of door lock and stopper for

locking arrangement good quality etc. Complete including materials

and labour as direction of Engineer in charge.

Providing and fixing Alco Pennel Ceiling made up of on either side

laminated with ACP of 3 mm thick with appropriate shape fixed with

10 mm thick Alliminium Section appropriate size with Locking 42.00 2950.00 Smt

arrangement , Door Stop and selling with Silicon & Birla 3 m Tape

Hardwer and etc. complete as directed by EIC.

Providing and fixing PVC Printed pain colour false ceiling with grid

type with alluminium frame consisting of 600mm x 600mm 3mm thick

plain PVC sheet used as panel insert in a frame work made using

anodized alluminium T section of size 1 x 1 (235 x 25mm, 19 gauge or

1 mm thick) in square pattern of grid sizes of 2 x 2 (600 x 600mm) The

11 alluminium frame work is supported from the cceiling with the help of 32.00 766.00 Smt

G.I. hook and G.I. wire/6mm M.S. rods of required sizes to maintain

proper level etc. The aluminium frame work is supported on side wall

with the use of alluminium L section of size 1 x 1 (25 x 25mm) angles

etc. complete as per direction of Engineer in charge. Manufactures

specification and drawing.

Providing and fixing wall cupboards, of 12" depth using 18MM

plywood for sides & shutters, 6MM plywood at backside laminate of

approved shade for all sides and inside white laminate including

materials such as beading strips, SS pipes for filing, handles, magnets,

adhesive having good quality of locking arrangements including labour

complete in all respect as directed by EIC.

Rs. Nine Lakh Ninty Nine Thousand one Hundred Twenty seven and Zero Paisa Only

The bidders are requested to submit price – bid (Schedule – B) on-line only and not to submit the price bid in physical form. This

is mandatory. If price bid is submitted in physical form, same will not be opened and only on -line submitted price bid will be

considered for evaluation.