Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹24.2 LAccepted-AOC NEAR KRIPAN TCP GATE PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹26.8 L+₹2.1 L (8.35%)Rejected-Finance GARRISON ENGINEER GE NORTH BINNAGURI | JALPAIGURI | WEST BENGAL | 735232 | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹28.7 L+₹3.9 L (15.7%)Rejected-Finance P O BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹29.7 L+₹4.9 L (19.8%)Rejected-Finance BINNAGURI HATKHOLA PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L-4 | Rejected-Finance Being L-4 | |
| 5 | L-5₹29.7 L+₹4.9 L (19.8%)Rejected-Finance POST BINNAGURI DIST JALPAIGURI W B PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L-5 | Rejected-Finance Being L-5 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
28 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NORTH) BINNAGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
REPAIR/MAINTENANCE TO STREET, PERIMETER LIGHTS, SECURITY LIGHTS, HIGH MAST LIGHTS, SECURITY LIGHT PANEL, POLES, GARDEN LIGHTS, GATE LIGHTS, ALLIED WKS AND CONNECTED ITEMS IN UNIT AREA SOUTH ZONE AND AP LOCATION AND MES AREA UNDER GE (N) BINNAGURI
2024_MES_639878_1
NIT No. 8701 / 54 / 2023-24 / 10 / E8
Open Tender
Civil Works
Item Rate
270 days
BINNAGURI CANTONEMNT
Class D Category b (i)
8 documents required · 8 mandatory
₹500
GE (NORTH) BINNAGURI
₹98,000
Yes
19 Mar 2024
31 Jan 2024
1 Mar 2024
31 Jan 2024
28 Feb 2024
15 Feb 2024
Amount
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and as directed.
Returning, filling in, including spreading, leveling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.
Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and leveling complete as specified and as directed .
Supply and laying sub class B bricks of size 230x125x73mm(+/- 10% tolerance limit) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.
Laying only old burnt old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified and as directed. Note: The serviceable bricks obtained while taking out cable shall be reused.
Horizontal boring suitable for 40mm bore steel tubing, under road/ pavement / hard standing etc, not exceeding 10 Meters in length, in any type of soil, suitable for passing through up to 50 mm bore, galvanised steel tubing complete all as specified and as directed.
S&F galvanised mild steel pipe /tubing, light grade complete with all fittings of 40 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps, bolts, nuts and washers as in cable protection complete all as specified and as directed.
Disconnecting & taking out defective under ground LT cable from trenches, pole, pipe, floor, wall etc including bricks ,GI pipes and removing from work site of unserviceable material and keep serviceable material for reuse in safe custody of any size complete all as specified and as directed. Note: Excavation/earth work shall be measured & paid separately under relevant item of this schedule.
Supply, laying, jointing and testing LT underground electric power cable crossed linked XLPE insulated, two or more core galvanized steel strip or wire armoured / PVC insulated armoured cable heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 sqmm 4 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts or passing through pipes etc fixing and connecting accessories such as Aluminium cable lugs, cable glands, nut, bolts, washwers etc complete all as specified and as directed. Note: Sand cushioning, protection brick and pipe shall be measured and paid separately under appropriate items.
Supply, laying ,jointing and testing LT underground electric power cable crossed linked XLPE insulated, two or more core galvanized steel strip or wire armoured / PVC insulated armoured cable heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 10 sqmm 2 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts or passing through pipes etc fixing and connecting accessories such as Aluminium cable lugs, cable glands, nut, bolts, washwers etc complete all as specified and as directed. Note: Sand cushioning, protection brick and pipe shall be measured and paid separately under appropriate items.
Relaying in trenches or passing through pipe, 1100 volts grade, LT electric power UG cables, of any type/Size with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete all as specified and as directed. Notes: (a) Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A'. (b) The serviceable bricks obtained while taking out cable shall be reused.
S&F in repairs street light bracket made out of GI pipe light grade 32 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 40 x 6 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and as directed.
M&L for cross arms, bracing, support, clamps and back plates fabricated from structural steel section including nuts, bolts, washer, welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed including GI clamp and including of one primer coat , one under coat and one finishing coat of synthetic enamel paint complete all as specified and as directed.
M&L for LED street light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 4500 lumen, system wattage 45 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed.
M&L for LED street light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 6000 lumen, system wattage 60 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed.
M&L for LED street light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 9000 lumen, system wattage 90 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed.
M&L for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 10000 lumen, system wattage 100 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and directed.
M&L for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 10000 lumen, system wattage 200 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed.
M&L for digging out incoming and outgoing cables of any sizes from loop near junction box/feeder pillar box in tranches, cutting burnout uninsulated portion of cable and rectify the defect and relaying the XLPE cable under ground aluminium conductor in trenches and returning and filling the excavated soil and connecting the cables with bus bars including provision of lugs as applicable and testing complete all as specified and as directed.
S&F factory made junction box IP-66 (weather proof), outdoor installation for street light of size 205 x 255x 112 mm made of high quality polycarbonate (shock proof, rust proof, corrosion free, acid and chemical resistant, fire retardant having high impact(IK 08) totally insulated made of Halogen and silica free recycle material, UV resistant having high grade gasket made of polyurethane with terminal including MCB SP 6 Amps breaking capacity 10KA with cable glands and fixing to the street light pole with 02 nos 25x3mm thick MS Clamp, nut, bolt etc including taking down old unserviceable junction box complete all as specified and as directed. Note: Contractor shall provide cable lugs and PVC gland of suitable size if required on site for connecting cable in junction box.
Supplying and fixing in repair single run 3 core, 2.50 sqmm nominal cross sectional area multistranded copper conductor cable, over all PVC sheathed, 1100 Volts grade confirming to IS-694-2010 (FRLS) heavy duty cable PVC insulated and PVC sheathed from pole junction box to light fitting complete all as specified and as directed.
S&F in repairs 20 mm nominal bore dia, UPVC pipes of pressure rating 10 kgf/cm2 fixed to pole, any type including provision MS clamp of size 20mm x 3mm flat at interval of 1.5 m length complete all as specified and as directed
S&F in repair power contractor 40 Amps 3 poles (1 NO + 1 NC), 415 Volts AC 50Hz,including connecting with existing system complete all as specified and as directed.
S&F in repair of digital time switch with astronomical function (5-40) Amps , 240 Volts 50/60 Hz, AC , Single phase complete all as specified and as directed.
M&L for disconnection of all electric connection and taking down of street light fittings of any type , size , capacity and model removing of unserviceable spares or accessories for repair/ replacement of the same including reconnecting and refixing of street light to its existing position viz pole / high mast and testing complete all as specified and as directed.
S&F in repair electronic driver suitable for 45 Watts LED Street light fittings of approved make / brand complete all as specified and as directed.
S&F in repair electronic driver suitable for 60 Watts LED Street light fittings of approved make / brand complete all as specified and as directed.
S&F in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessary connection complete all as specified and as directed. Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.
Supply, installation and testing of outdoor time line distribution board for street light, degree of protection IP 54, three phase, maximum load 12 kW, prewired with digital timer switch, contactor TP rating 65 Amp and MCB Triple pole & neutral rating 63 Amp including taking down complete all as specified and as directed.
M&L for steel tubular poles (swan necks street light pole) complete with cast iron base plate, final taper plug bolts, nuts & screws as specified type 410 SP-31, 9.0 meter long including painting all external exposed steel surfaces with two coats of aliminium paints over a coat of red oxide zinc chrome primer and all internal surfaces and external surfaces in contact with concrete with two coats of black bituminous paint complete all as specified and as directed including taking down old existing concrete poles / struts any size after demolition of foundation and depositing / stacking at a place where directed within 5kM distance from the work site complete all as specified and as directed.
M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate for foundation of stay assembly/struts/pole etc. (around the poles in pit) complete all as specified and as directed.
M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate for coping / pedestal of poles including necessary form work, fair finishing to exposed surfaces by using extra cement complete all as specified and as directed.
M&L painting of steel pole (swan neck type or straight type) up to 12 mtr height with cross arms, clamp of any length and shape for LT overhead line/ for street light with two coat of aluminium paint after scratching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 15 cm dia yellow circle with number writing with black synthetic paint/ Sticker, including painting strips in alternate from bottom to top with three strips of black synthetic paint & two strips of Yellow/ Sky blue paint (as per existing pattern through out the circumference of pole, including removing extra wall papdi, peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat of white washing on PCC copping of pole and re-numbering of pole with approved size of letter (example - P- 001) with synthetic enamel paint of white colour background and black colour lettering complete all as specified and as directed.
M&L Painting to the LT RCC poles with strips in alternate from bottom to top with three strips of black synthetic paint & two strips of Yellow/ Sky blue paint (as per existing pattern) through out the circumference of pole including one coat of lime wash on PCC copping of pole , two coat of white colour cement base paint on pole and two coat of aluminium paint to channels, cross arm, clamps and pipes fixed/ mounted on pole after scratching out old paint, cleaning and making exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 15 cm dia yellow circle with number writing with black synthetic paint/ sticker complete all as specified and as directed.
M&L for Inverted Pyramid Tripod type LED Bolard light 10 Watt (Warm) with 3600 light distribution made up of high grade unbreakable polycarbonate material, IP-65 protection including taking out old unserviceable garden light fittings complete all as specified and as directed.
M&L for repairing of mechanism of lowering down and hoisting of flood light cage (mobile Head frame) of High mast assy of 16 mtr height, repairing, servicing of hoisting motor assy, repairing of chain, greasing of moving parts and replacement of steel rope, pulley ,repairing of elevator wrench system etc, relaying of rope from top to bottom and making the mechanism functional complete all as specified and as directed.
M&L for winding of induction motor of single phase, 1 HP, 240 V, 50 Hz of High mast of hoisting and lowering mechanism of flood light cage with super enameled winding wire of existing gauge, replacement of bearing as per existing etc to make the motor functional complete all as specified and as directed.
M&L for repairing of Control Panel of Height mast assy, repair / replacement of unserviceable parts like MCB, Contractor, auto manual switch, NO + NC switch, starter motor, replacement of unserviceable indicators, start stop switch, repairing and complete wiring of panel with min 1.5 Sqmm wire complete all as specified and as directed.
Shri Amarnath Sah
BBKundu
M/s AHMED ENGINEERING
M/S East India Traders
SINGH & CO
BIG BEN ENTERPRISES
M/s. MD IRSHAD
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .