Construction of ITI Building at Dalash Distt. Kullu (HP) (SH- Providing fire fighting system).

Amount

Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) as per direction of Engineer-in-Charge.

Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 as per direction of Engineer-in-Charge.

Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. as per direction of Engineer-in-Charge.

M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required & as per direction of Engineer-in-Charge..

Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head (Kilosker/KSB) as per direction of Engineer-in-Charge.

Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter- connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required & as per direction of Engineer-in-Charge.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :(Jindal Hissar/ TATA) & as per direction of Engineer-in-Charge. (A) 100 mm dia

(B) 80 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :(Sant/Zoloto) & as per direction of Engineer-in-Charge 100mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange & as per direction of Engineer-in-Charge.(Kartar/DRP)100 mm dia

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Stainless Steel & as per direction of Engineer-in-Charge

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.(Kalpex/Padmini/Aag ) & as per direction of Engineer-in-Charge

Supplying & fixing 63 mm dia SS short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required (Kalpex/Padmini/Aag ) & as per direction of Engineer-in-Charge

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe & as per direction of Engineer-in-Charge

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required & as per direction of Engineer-in-Charge.

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required & as per direction of Engineer-in-Charge.

Supplying and fixing single headed internal hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :(Kalpex/Padmini/Aag ) & as per direction of Engineer-in-Charge

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :100 mm dia(Sant/Zoloto) & as per direction of Engineer-in-Charge

Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc. & as per direction of Engineer-in-Charge

Providing and fixing of FIRE EXTINGUISHER, ABC Powder type (stored pressure) as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark complete in all respect. Kalpex/Safex 4 Kg & as per direction of Engineer-in-Charge

Providing and fixing of FIRE EXTINGUISHER, CO2 type as per IS: 15683 complete with all accessories as per Manufactures Specification. ISI Mark (Kalpex/Safex)complete in all respect. 4.5 kg & as per direction of Engineer-in-Charge

P/F G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 25mm dia nominal bore & as per direction of Engineer-in-Charge.

Providing & placing on terrace (at all floor levels) polyethylenewater storage tank, IS: 12701 marked, with cover and sutible locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings abnd the base supportsfor tank & as per direction of Engineer-in-Charge.

bhupender

Avtar krishan

Guleria Electric and Contracts

M/S SHARMA ENGINEERING WORKS