SPL REPAIR BY CONVERSION OF CHARPOY GI NYLON NEWAR INTO CHARPOY GI PLYTOP AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 01

Removing unserviceable nylon newar from Charpoy GI pipe (FD-220), tightening loose components of the complete charpoy and supplying and fixing 12 mm thick BWP grade ISI marked plywood conforming to IS:710 [Make: Greenply Gold 2.0 / Archid Ply Gold / Century Ply –(Architect Ply)] of required size (cut from 7' x 3' sheet) with 10 Nos stainless steel (304 grade) half-round top nut and bolt of size 50 mm length and 6 mm dia, including 3 Nos stiffeners made out of MS flat iron of size 900 mm (L) x 50 mm (W) x 6 mm (T) and 4 Nos MS flat iron of size 75 mm (L) x 25 mm (W) x 6 mm (T), duly painted with two coats of silver colour synthetic enamel paint over one coat of red oxide primer after proper surface preparation. All edges shall be properly rounded. complete all as specified and directed by Engr-in-charges.

Removing unserviceable long rail of Charpoy GI pipe and supplying and fixing new long rail of 32 mm dia medium grade GI pipe (Make: TATA / JINDAL / SAIL), threaded at both ends, complete all as specified and directed by Engr-in-charges. (FD-220).

Converting retrieved unserviceable long rail into two short rails duly threaded (two from each long rail) as per drawing and replacing the same with existing unserviceable short rail of Charpoy GI pipe, complete all as specified and directed by Engr-in-charges. (FD-220).

Converting legs from retrieved unserviceable short rails duly threaded (two from each short rail) and supplying and fixing MS clamp for MNF set and replacing the same with existing unserviceable leg in Charpoy GI pipe, including supply and welding of 3 mm thick MS plain black sheet, 40 mm dia round shape at the bottom of leg duly painted in silver colour, complete all as specified and directed by Engr-in-charges. (FD-220).

Removing existing unserviceable elbow of Charpoy GI pipe and supplying and fixing new 32 mm 3-way GI elbow (Make: Zoloto / Unik / DRP), complete all as specified and directed by Engr-in-charges. (FD-220).

Removing existing unserviceable check nut from Charpoy GI pipe and supplying and fixing new GI check nut of 32 mm (Make: Zoloto / Unik / DRP) in position, complete all as specified and directed by Engr-in-charges. (FD-220).