Furnishing/renovation of additional space for DISCOM, ALDC O/o SE (Intersate) at Totu in existing workshop building and 132 KV sub station Control Building at Totu Shimla-171011

Amount

2.6 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size)

10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

10.16 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.10.16.1 Hot finished welded type tubes

M/Rate Providing and fixing Wire mesh 50x50mm size of 3mm thick wire complete in all respect

M/Rate Shifting of PVC Water storage tanks from Ceiling to Tank Stand including removal of old fittings and fixing new fittings (fittings to be measured and paid seperately)

18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. internal work - Exposed on wall :- a) 15mm nominal bore

18.10 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. internal work - Exposed on wall :- b)20mm nominal bore

18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :- a) 15mm

18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :- b) 20 mm

18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :- (a) 15mm nominal bore

18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :- (b)20mm nominal bore

18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour :- 18.75.1 15 mm nominal bore, weighing not less than 32 gms

18.75 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour :- 18.75.2 20 mm nominal bore, weighing not less than 40 gms

M/Rate providing and fixing Tullu Pump 1 H.P including all fittings as required (Crompton Make)

14.45 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer?In-Charge.

13.111 Finishing walls with Acrylic Smooth exterior paint of required shade :13.111.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm).

13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Vanshika Enterprises

Shree Khand Mahadev Enterprises

DALIP SINGH VERMA

shashikant