Work to be executed at Hill Top Swarghat. Under the Circuit Mandi-Bilaspur 2005-06 and destination Swarghat , Ghagus-Ghumarwin Sarkaghat Tourist Destination 2010-11. Sub Head Special repair work of Hotel Hill Top Swarghat Distt. Bilaspur

Amount

Excavation in foundations, trenches etc., in earth work, in all kinds of soil such as pick work, jumper work, blasting/chiseling/wedging out of soft/hard rock in all depths including pumping and bailing out water and stacking the excavated in specified manner clear from the edge of the excavation and then returning the stacked soil in 15 cm. layers, foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height of propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts. a) Foundation, footings, basis of columns and mass concrete.

c) Columns, pillars, posts and struts square, rectangular in plain.

Providing and laying cement concrete 1:4:8 (1cement:4sand:8 graded stone aggregate 25 mm nominal size) and curing complete excluding cost of form work in foundation and plinths including carriage of materials in all lead and lifts.

Providing and laying cement concrete 1:1.5:3 (1cement: 1.5 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials in all leads, lifts and upto all heights. in Foundation, footings, basis of columns and mass concrete.

Providing mild steel/tor steel reinforcement for RCC work including bending, binding also cost of binding wire and placing in position complete upto all floor level including carriage of materials in all lead and lifts.a) Tot Steel TATA /SAIL Make

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete including carriage of materials in all lead and lifts. 80mm thick NTC make

White glazed tiles in skirting, risers of steps and dado laid over 12 mm thick cement mortar 1:3 (1cement:3sand) and jointed with cent slurry including carriage of materials in all lead and lifts and heights 300x300 mm size, RAK Nitco/Kajaria (basic rate not less than Rs.40/- per Sq.ft.

Kota stone slab flooring 25 mm (average) thick base of cement mortar 1:4 (1cement:4sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc. with granite polish complete and carriage of materials in all lead, lift and height.

Providing and fixing coloured ceramic non skid tile 10 to 12 mm thick in flooring, minimum size of 600x600 mm laid over a bed of 12 mm thick cement mortar 1:3 (1cement:3sand) finished with flush pointing in white cement including carriage of materials Nitco/ Rak/Kajaria/ Somany Global make (basic rate not less than Rs. 65/- per sq.ft.)

Providing and laying granite stone flooring 20 mm (average) thickness over a base of cement mortar 1:3 (1cement:3sand) laid over and jointed with grey cement slurry mixed with pigment to match shade of the granite stone including rubbing and polishing with granite polish finish grey/red including carriage of materials in all lead, lifts.(Basic rate not less than 220.00 per Sqft.)

Providing and fixing of standard make aluminium tube 50 mm x 25 mm of 2 Kg per ft. cutting fixing on walls/structure ceiling with fastners and screws framing grid as per requirement fixing ACP of 3 mm wooden shade thick with self driling scers and cover with silico sealant with masking tape double adhesive tape removing making film form sheets complete as per requirement including carriage of materials in all lead and lifts as per direction of Engineer-in-Charge (sample & make approved by Head Office).

Steel work welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a coat of red lead paint including carriage of materials in all lead lifts and height. In gratings framed guard bars ladders, railings brackets and similar works

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials in all leads, lifts and heights.

Polishing two or more coats with melamine polish on new wood and wood based surface to give an even shade as per direction including preparing the base surface cleaning of all dirt dust and sand papering etc. complete including carriage of materials in all leads, lifts and heights.

Painting two coats of standard make and quality (excluding priming coat) on new wood and wood based surfaces, with enamel paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping including carriage of materials in all lead and lifts and heights. With enamel paint other then white.

Wall Painting ( one coat) with plastic emulsion paint of approved brand and manufacture on decorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease, loose pieces of scale and sand papered smooth including applying of putty a required for making the surface including carriage of materials in all lead and lifts.

Distempering (two coat)with oil bound washable distemper of approved brand and manufacture and of required shade on decorated wall surface to give an even shade after thoroughly brushing the surface clean of all grease dirt loose pieces of scales and also including preparing the surface even and sand papered smooth including carriage of materials in all lead and lifts and heights.

Dismantling of tiled floors laid in mortar up to floor two level and above including stacking of serviceable materials and disposal of un-serviceable materials as per the direction of Engineer in Charge (wooden/concrete joists to be measured and paid for separately) through manual and mechenicaly means with in approved dumping site. Upto 25 mm and above thickness.

Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with paint remover of approved brand and manufacture including carriage of materials in all lead and lifts.

Providing and fixing white vitreous china water closet & seat cover with cistern Cera make Cat No. S1020102, S1060101, B1510101,B1810101 or equivalent series of Hindware /Jaquar make with integral "P or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement:2sand) complete unit including seat cover of approved colour and including carriage of materials in all leads and lifts.

Providing and fixing white Vitreous China water closet squatting pan Cear makeCat No. S3010102 or equivalent series of Hindware /Jaquar make including carriage of materials in all lead and lifts.

Providing & fixing white viterous china bowl pattern urinal Cera make Flat Back Small Cat No S4020102 or equivalent series of Hindware /Jaquar make including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp large size flat back including carriage of material in all lead and lifts.

Providing & fixing 8 to 10 litres White Colour P.V.C. low level dual flushing cistern with a pair of C.I. or mild steel brackets complete with fitting in all fitting Cera Make Corona Cat No. B1010101 or equivalent series of Hindware /Jaquar make including carriage of materails in all leads and lifts

HANS CONSTRUCTIONS