SPL REPAIRS TO TOILET BLOCK REPLACEMENT OF HIGH BAY AT OL PROVN OF GEYSERS AT LL BARODA

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick ( above or below GL) complete.

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation etc. & not exceeding 10 Sqm on plan for shafts, cesspits, manholes, pier holes, poles, laying of cables, stay, strutetc and getting out in soft/loose soil complete

Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete.

Supply and laying dry sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete. NOTE : 1. Dry fine sand of best available quality shall be used. 2. Punned thickness shall be measured and paid.

M&L PCC 1:2:4, type B1 (20mm graded aggregate) as in coping and benching and the like including weathering slightly rounded or chamfered angle and throating & use of form work complete.

M&L Reinforced cement concrete type B1 1:2:4, (20 mm graded aggregate) nominal mix as in slab supported on wall complete.

S&F factory made Reinforced precast cement concrete manhole cover of size 450 x 900 x 50mm in 1:2:4, type B1 (using 20mm graded stone aggregate) and set in CM 1:6 complete.

Demolition of brick/stone massonry work built in cement mortar including all quoins, arches, pillars etc complete.

M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved exceeding 6mtr mean radius complete.

M&L for Cutting chases for concealed pipe where required and pointing in CM 1:3 etc in brick wall for bore of pipe 15 / 20 mm complete.

M&L Sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks as protection cover of cable laid, complete.

M&L for formwork for rough finished flat surface of concrete to to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. Exc. 200mm thick (Horizontal or sloping) complete.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each & removing from site complete.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheets, reinforced with MS square tube, supplying and fixing in opening as per specification and drawiing. The door frame shall be fixed to the wall using 75/100mm long MS screws complete.

M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat rounded plain colour PVC 'C' channel having a PVC sheet strip & 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert to top rail & bottom rail, Paneling of plain colour sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitbale PVC sheet beading and jointed together with solvent cement and fixing in the frame at site as per specification and drawings complete.

S&F stainlees steel butt hinges 100mm medium weight complete.

S&F aluminium alloy handle 150 mm cast type anodised complete.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section and fixed complete.

S&F in repairs 60cm long CP Brass 20mm dia tubular towel rail with flanged ends complete.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebeats including jointing cleat for fixing etc, complete

S&F structural steel work Fe-290 (Gde -165) as in roof trusses (framed), trussed purlins, crane gantris, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) and wind tie incl distance pieces, cleats etc. complete

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10 cm long, dia of neck 5 to 10mm complete

Dismantling Asbestos Cement (Corrugated, Semi- Corrugated, etc) sheets in roof covering complete.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete

M&L 75mm thick PCC 1:3:6 type C2 as in plinth protection, path etc finished the surface even & fair complete

M&L 25mm thick PCC 1:2:4 type B1 as in base of flooring etc finished the surface even & fair complete

M&L 100mm thick PCC 1:4:8 type D2 as in sub base, path etc finished the surface even & fair complete

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15mm thick in cement mortor (1:6) complete.

M&L for glazed ceramic coloured wall tiles in vertical surface 300 x 200 / 350x250 / 450 / 350mm & 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & incl 10mm thick rendering in CM 1:4 complete.

Taking down cement plaster from brick / concrete surface including scrubbing down with water etc complete.

M&L for 15 mm thick rendering in CM 1:6 on brick work or concrete surface on wall finished even and smooth without using extra cement complete.

M&L for 15mm thick rendering in two layer on brick work or concrete surface of wall as 5mm thick plaster in CM 1:4 mixed with & incl. WPC @ 3% by weight of cement, surface shall be finished even and smooth without using extra cement over 10mm thick plaster in CM 1:6 complete.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete.

M&L for preparation of old plastered surfaces of walls and applying two coats of white wash complete.

M&L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete.

M&L for complete removal of old treatment of plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete.

S&F in repairs C.P grating of size 150 x 150 mm complete.

M&L for preparation of newly steel surface of any description not otherwise descsribed over 10 cm width or girth with two coats of synthetic enamel paint over a coat of red oxide primer complete.

M&L for galvanised steel tube light Grade of 32mm dia as protection of cable, fixed to pole / walls or laid in floors, road crossing ducts with all necessary fittings and fixures and fixed with clamps, bolts, nuts and washers etc complete.

Supply & laying in trenches of GI steel tube 20 mm bore of pipe medium grade including all fittings such as Tees, elbow, bends etc complete.

S&F Galvanised steel tube 15 mm dia medium grade with all fittings and fixed to wall / ceiling or laid in floor using teflon tape complete.

S&F Galvanised iron tube 20mm dia bore medium grade incl all fittings and fixed to wall / ceiling or laid in floor using teflon tape complete.

S&F Galvanised iron tube 25mm dia bore medium grade including all fittings and fixed to wall / ceiling or laid in floor using teflon tape complete.

Taking down steel tubing and connection of size 15mm dia bore fixed on wall, trenches and ceilings complete

Taking down steel tubing and connection of size 20mm dia bore fixed on wall, trenches and ceilings complete

Taking down steel tubing and connection of size 25mm dia bore fixed on wall, trenches and ceilings complete

S&F in replacement 1000 litre capacity rotational moulded two layered polyethylene water storage tanks ISI Marked (cylindrical, vertical with closed top) hoisted and fixed in position complete

S&F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete.

S&F CP bib tap fancy type 15 mm bore cast copper alloy with round operating knob screw down screwed for iron pipe complete.

S&F in repairs 15 mm bore CP stop cock / Angle cook cast copper alloy, fency type screwed down high pressure with capston head screwed for iron pipe complete.

S&F 15 mm bore stop cock (ISI marked) cast copper alloy, screwed down high pressure with fancy type chromium plated crutch or butterfly handle screwed for iron pipe complete

S&F in repair concealed type CP stop cock fancy type with sheet flange cast copper alloy, scrwed down high pressure with round operating knob for 15 mm bore pipe bore and fixed complete.

S&F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete.

S&F in repair 20 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete.

S&F in repair 25 mm bore Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe complete.

S&F in repair 20 mm bore ball brass valves, high pressure, with polythene float and fly nut complete.

S&F in repairs PVC (SWR) Floor / gully trap of size 125 /110mm setting and jointing with solvent cement complete.

S&F in repairs 125mm dia chromium plated shower rose with swivel joints including fixing to GI union complete

S&F in repairs Chromium plated soap dish heavy duty fixed with brass screw complete.

S&F in repairs vitrous china wash down water closet pan (pedestal pettern) white including white plastic water closet seat and back with flat bottum and cover mild steel chromium plated are aluminium anodised hinging device (excluding flaushing cistern and flush pipe) but encluding fixing bolt and necessary connection with existing pipes complete.

S&F in repairs vitreous China squatting pan of Orissa pattern size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including P or S trap etc and provision of PCC 1:5:10 bedding complete.

S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve, PVC band 32mm complete.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe) incl waste pipe complete.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete

Taking down soil waste and vent pipe (any size or pattern) including all fittings complete.

M&L for PVC (SWR) pipes, 110 mm bore, single socketed pipe in any length with rubber ring joints laid in floor or trenches fixed complete

S&F in repair PVC connection 15mm bore with PTMT nut of length 450mm complete.

M&L for PVC (SWR) bends without access door suitable for 110 mm Bore pipe fixed complete.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar 150mm dia pipe complete

M&L for Salt-glazed stoneware drain pipes of 150mm dia bore, laid in trenches and jointed complete.

M&L for Concrete bed to drain pipes of 150mm dia bore including packing under and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D2 for 150mm dia bore pipe work in foul position complete

Taking down Existing Old unserviceable Light any make or capacity complete.

Taking down carefully of MCB DBs / Change over switch / Main switch any make or capacity with MCBs / Isolators / RCCBs etc complete.

Supply and laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10sqmm 2 Core nominal cross section in service connections .

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics & IP 65/66 protection including bracket made out of GI pipe light grade 32mm bore not less than 1.20m long bent to shape required fixed to pole with suitable size 2 Nos clamps made out of 25X3mm flat iron with nut, bolts and washers complete

Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) with fittings / fixures such as switches, sockets, switch sockets, ceiling rose, fan regulators, etc ( except tube light fittings), removing materials for taking credit and making good disturbed surface of wall, floors, etc complete.

M&L Point wiring with 1.5 sqmm single core PVC insulated (FRLS) and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit 25mm dia bore and all accessories, Concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc including cutting of chases where as required and making good all disturbed work to match the existing for One light / fan point controlled by one switch 5 Amps 1 way complete.

S&F switch piano, flush type 5/6 Amps one way 230 V AC

M&L point wiring with 2.5 sqmm single core multistranded copper conductor PVC insulated and unsheathed cable 1100 Volts grade drawn through and including non metallic rigid PVC conduit, medium grade minimum 19 mm width ISI marked and accessories fixed on wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out 1.2 mm MS sheet, 3 mm thick laminated sheet top cover for mounting of fittings, switches, socket outlets, regulators etc complete including provisioning of 2.5 sqmm PVC insulated unsheathed cable 1100 volt grade with multistranded copper conductor to common earth and connected to earth dolly for One 15 Amps socket point controlled by one switch 15 amp on independent board complete

S&F ceiling rose surface backalite 65 x 50 mm three terminal complete.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete.

S&F distribution board double door SPN 4 way with 200 amp rated copper bus bar complete.

S&F MCB DB SPN 12 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V for fixing of MCBs/Isolators/RCCBs etc completed.

S&F MCBs DB TPN 4 way factory made IP 42 protection class metal double door with 200 Amp rating bus bar 240/430V complete

S&F MCB TPN 4 pole 63 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete

S&F MCBs SPN 5 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete.

S&F MCBs SP 5 to 40 Amps 240/415 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 Sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB complete.

M&LSingle pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB 10 Amp complete

M&L in repairs Earthing with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt in alternate layers, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No. 3 of Part I & including necessary excavation and earth work, 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete 1:3:6 type C-I, 40 mm thick, RCC (1:2:4) type B-1 cover and CI frame etc. complete. NOTES: (i) The unit rate includes earthing wire and protection pipe up to 7.5 metre. (ii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe bends elbow shall be deemed included in the rates.

S&F exhaust fan made of sturdy engineering plastic with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 250mm including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and cutting hole on existing wall & making good disturbed surface of wall complete. NOTE: Old UNSV fans will be deposited to AGE E/M office through RV.

M&L in replacement Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 2.5 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 2.5 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor. NOTE : Two runs of single core 2.5 sqmm and one run of 2.5 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

S&F Electric water heater storage type steel body with copper inner tank and heating element upto 2 kw capacity 25 ltrs BEE 5 star rated with all accessories such as safety valve, thermostat, NRV, connection pipe etc. Complete. NOTE: Old UNSV will be deposited to AGE E/M office through RV.

S&F MCB Single pole and neutral (SPN), having rupturing 10KA, 'C' curve, 240 V 40 to 63 amps with connection testing and commissioning complete.

S&F MCB SP 5 to 32 A. 'C' curve, 230 V AC with connection testing and commissioning complete.

S&F LED High bay, 100W 5700K (NB) incl. hanging arrangement of the light from angle beam & similar to Make Havells Model BAYBRITESAUCERHBP80WLED757S60DTOLTG complete.

Badri Electricals

CENTAUR ENGINEERS