Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.7 LAccepted-AOC R O Y K PURA QAZIGUND ANANTNAG 192221 J K | ANANTNAG | JAMMU AND KASHMIR | 192221 | L1 | Accepted-AOC Lowest bidder and quoted reasonable rate | |
| 2 | L2₹24.0 L+₹77,594.50 (3.34%)Rejected-Finance HOUSE NO 102 LANE NO 4 C ANAND NAGAR BOHRI JAMMU 180002 J K | JAMMU | JAMMU AND KASHMIR | 180002 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹24.7 L+₹1.5 L (6.31%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹28.7 L+₹5.5 L (23.7%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹29.0 L+₹5.8 L (25.0%)Rejected-Finance 12 DORU DOORU VERINAG ROAD NEAR TOWN HALL ANANTHNAG JAMMU KASHMIR 192211 | ANANTNAG | JAMMU AND KASHMIR | 192211 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹25.4 L
EMD Value
₹50,800
Closing Date
21 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Kargil
GE Kargil, PIN - 908121, C/o 56 APO
GE-K-37-2023-24 - SPL REPAIRS OF CERTAIN ITEMS IN BLDG NO. T-193 AT 121 (I) BDE GP SIG COY AND BLDG NO. TE-20 AT 6121 (I) FD WKSP COY EME UNDER GE KARGIL
2023_MES_615307_1
GE/K-37/2023-24
Open Tender
Civil Works
Item Rate
180 days
Kargil
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Kargil
₹50,800
12 Oct 2023
23 Aug 2023
23 Sept 2023
23 Aug 2023
21 Sept 2023
7 Sept 2023
Amount
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as directed.
Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.
S & F second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed.
S & F second class softwood fillets square, rectangular or triangular in section sectional area not exceeding 3 sqcm , clean sawn, secured with nails or brads bullnosed, splayed, chamfered or rounded on one edge or face as in cover fillets, all as specified and directed.
S & F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in walls complete all as specified and directed.
S & F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work in ceiling or sloping portion complete all as specified and directed.
S&F second class softwood moulding as in cornices, picture rails and the like sectional area not exceeding 6 Sqcm fixed with nails complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.
S & F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap bent to curve, with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and directed.
All as per item no 9 above but except sheeting.
S&F 0.63mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section, in any position in framed work in partition complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.
Taking down shutters exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.
Supply and fix mild steel framed work as in door or gates of angle or other sections with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel sheeting or other covering, running rails and guides) and hanging, fastening and fixing complete conforiming to Fe 290 Gde E-165 (machine butt hinges and flat iron hold fasts to be measured separately)
M & L for second class softwood (KAIL), plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engr-in-Charge.
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed
S & F 35mm thick second class softwood (KAIL) Plain, framed, panelled shutters (two panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.
S & F second class softwood (KAIL) 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. complete all as specified.
S & F second class softwood (KAIL) 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. complete all as specified.
Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone,concrete or brick surrounds,glazed with putty or fixed with beads complete all as specified and directed.
S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.
S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc complete all as specified and directed.
S&F 100 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.
S&F 75 mm butt hinges medium weight cold rolled mild steel fixed with screws or welded complete all as specified and directed.
S&F anodised aluminium barrel tower bolt extruded sections 200 mm size complete all as specified and directed.
S&F anodised aluminium barrel tower bolt extruded sections 100 mm size complete all as specified and directed.
S&F 150mm long, Aluminium handles, cast type,anodised complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
M&L for preparing previously untreated wood and wood based material of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surface.
M&L for preparing previously untreated steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint over one coat of redoxide primer including preparation of surface.
M&L for preparing old wooden surfaces of any description over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and directed.
M&L for preparing old wooden surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparing old steel surfaces of any description over 10cm width/girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete incl 20mm thick screed bed in CM 1:4 complete all as specified and directed
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete incl 15mm thick rendering in CM 1:4 complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.
M & L for colored joint free Non - skid Ceramic tiles 9 to 10mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
M & L for 25 mm thick plain cement concrete 1:2:4. type B-0 (using 12.5 mm graded aggregate) as subbase to floor tiles complete all as specified and directed.
M & L for 50 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in subbase to floors complete all as specified and directed.
Demolition of concrete of any description and in any position and removal of rocks/debris to a distance not exc 50 mtrs and depositing where directed at a level n exc. 1.5 m above the starting point.
M & L for 75 mm thick plain cement concrete 1:3:6. type C-2 (using 40mm graded aggregate) as in plinth protection and subbase to floors complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed
M & L for coloured chequered cement concrete tiles 20x20x25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 20 thick screed bed in CM ( 1:4) complete all as specified & directed
Providing and laying 60mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
Demolition of precast concrete articles and precast concrete block walling including all quoins, arches, pillars, etc built in cement mortar of any description not other specifically provided for etc complete all as specified.
M&L for Precast cement concrete type C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6), complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L rendering 15mm thick cement plaster in cement mortor (1:4) finished even & fair without using extra cement on brick/concrete surfaces.
M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces.
M&L for two coats of oil bound distemper on newly plastered surfaces of walls over a coat of primer including preparation of surfaces.
M&L for two coats of cement based paint on newly plastered surfaces of walls over a coat of primer including preparation of surfaces.
M&L for applying two coats of oil bound distemper on old plastered surfaces of walls including preparation of surfaces.
M&L for applying two coats of cement based paint on old plastered surfaces of walls including preparation of surfaces.
S&F in repair curtain rails anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc. complete all as specified.
M&L for taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets light fittings etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and directed.
M&L of point wiring for light/fan/bell with FRLS cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.5 sqmm green in colour PVC multistranded, copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3 mm thick pre laminated hylem sheet/PVC box, surface/ flush type for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc complete all as specified and directed.
M&L for point wiring for socket outlet with FRLS cable 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 2.5 sqmm green in colour PVC multistranded, copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3 mm thick pre laminated hylem sheet/PVC box, surface/ flush type for mounting fittings such as switches, sockets, for multi 5 pin 5 amp flush type socket outlet on independent board, complete all as specified and directed.
M&L for point wiring for socket outlet with FRLS cable 2.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 2.5 sqmm green in colour PVC multistranded, copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3 mm thick pre laminated hylem sheet/PVC box, surface/ flush type for mounting fittings such as switches, sockets, for multi 6 pin 15 amp flush type socket outlet on independent board, complete all as specified and directed.
Supply and fixing Switch piano flush type single pole one way, 5/6 Amps, ISI Marked fixed on laminated sheet top cover (laminated sheet top cover is included in point wiring) complete all as specified and directed.
S&F Switch socket combination 2 in 1, 6A flush type
S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal
M&L of ceiling rose on PVC square Blocks surface bakelite 3 terminal complete all as specified and directed.
Supply & Fixing LED complete fitting 1 x 20 Watt, appx 4 feet long extruded polycarbonate environment friendly and aluminium housing & integrated driver, including electric connection with using 2 core flexible copper conductor cable of size 1.0sqmm from ceiling rose to tube fitting, complete fitting with all accessories and following specifications all as directed. (a) Lumen system efficacy of luminaire should be minimum 110 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 10 C to plus 45 C (d) Power factor : Minimum 0.95 (e) THD : Max 10% (f) IP rating IP- 20. (g) Aluminium housing & Integrated Electronic driver (h) LED Driver of the make as of the luminire. (j) LED driver should be complete with all protections viz open/short protection, over voltage protection, all as per standard design of manufacture. (k) Surge protection minimum 2.5 KV. (l) CCT 6500K (m) CRI : More than 80. (n) Rated life time : 50000 burning hrs (Average 10 to 12 hrs daily).
M&L for Distribution Board double Door 12 way SPN made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting with bus bar rating 200 Amps, dust and vermin proof , IP-43 protected, suitable for incorporation of MCB’s and isolators etc complete all as specified and directed.
Supply and fixing 220V 10KA 'C' curve MCB SPN of 32 amps current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed..
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.
S&F of Magnum Flood light LED 70 W with high pressure die cast housing and IP65 Protection,including hanging materials complete,all as specified and directed. Make Havells / PHILIPS/ Crompton .
M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3mm thick, buried directly in ground vertically (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel and connected to main switch board or equipement,including watering arrangement with GI light grade 20mm bore watering pipe with funnel and wire mesh with PCC chamber.CI cover with frame,15 mm dia GI pipe light grade for protection of earthing lead etc including necessary excavation in any type of strata,returning,filling,removal of soil outside MD land,filling of charcoal and salt complete all as shown in electrical plate No.3 of MES Sch Part I,connected to Earthing test point all as specified and directed on testing on completion. Notes: (i) Earth continuity conductor including protection pipe up to 7.5 metres from earth electrode will be include in unit rate,complete all as specified and directed. (ii) Arrangement for earth resistance test should carried out by the contractor.no extra payment shall be provided for the same.
Supply & fixing light grade GI Pipe of size 40 mm bore, ISI marked on pole/wall for cable protection complete all as specified and directed.
M&L of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 16 sq. mm 4 core complete including taking down of existing cable, all as specified and directed.
Excavation in trenches hard and dense soil, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, not exceeding 10 sqm on plan and not exceeding 1.5Mtr in depth & getting out of hard and danse soil for taking out & laying of cable & getting out for diverting of CI pipe line complete all as specified and directed.
Removal of excavated soil to distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick complete all as specified.
Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I, complete all as specified and directed.
Supplying and laying un-reinforced precast concrete cable cover, class LV, Type I, flat, size 250 mm x 150mm x 40mm laid dry over electric cable for protection,complete all as specified and directed.
M&L of XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 10 sq. mm 2 core complete,including taking down of existing cable, all as specified and directed.
Note : Deduction for amount of Rs 53256.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.
SUMEET TRADING CORPORATION
KASHMIR FAIR DEAL SERVICES
M/S MOHD SADIQ
M/S ALI MOHD AND SONS
M/S BALI CONSTRUCTIONS
LUXMI ELECTRONIC WORKS
CONTRACTORS INDIA
M/s B R Constructions
R C TRADERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .