Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹16.9 L+₹37,880 (2.30%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹17.0 L+₹49,285 (2.99%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹19.8 L+₹3.3 L (20.0%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
7 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Banar
Garrison Engineer Banar, Jodhpur-342027
REPAIR TO ROOF PROJECTION, PLASTERING IN MD ACCN AND OTM ACCN AT ARMY AREA BANAR, JODHPUR
2022_MES_536295_2
8822/20/E8
Open Tender
Civil Works
Item Rate
180 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Banar
₹40,000
Yes
12 Sept 2022
17 Aug 2022
9 Sept 2022
17 Aug 2022
7 Sept 2022
24 Aug 2022
Amount
Demolition of RCC roofs, floors (other than ground floors), beams, staircase, landing, chajjas, balconies, roof projection and similar suspended work complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick /stone walls / concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc up to 12 mtr height and its removal from site complete all as specified and directed by Engr-in-Charge.
Material and labour for RCC (Nominal Mix) type B1, 1:2:4 ( 20mm graded stone aggregate) in Chajjas, balconies, roof projection and similar suspended work complete all as specified and directed by Engr-in-Charge.
Material and labour for TMT Bars 10mm dia and over, cut to lenght, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 dia or securing with clips and welding to existing reinforcement with and including flat iron of size 25x4mm complete all as specified and directed by Engr-in-Charge.
Material and labour for formwork to chullah, Chajja, balconies, roof projection, troughs and similar suspended items including edges for rough finished flat surfaces of concrete complete all as specified and directed by Engr-in-Charge.
Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels,plates etc, including welding,grinding ,buffing,polishing and making curvature ( whereever required) and fitting the same with necessary stainless steel nuts and bolts complete all and including fixing the railing with necessary accessories and stainless steel dash fasteners , stainless steel bolts etc , of required size , on the top of floor or the side of waist slab with suitable arrangement all as directed by Engr in Charge.
Supply and Fixing steel dome 50 mm dia including polishing complete all as specified and directed by Engr-in-Charge.
Supply and Fixing steel cap 40 mm dia complete all as specified and directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-charge.
Material and labour for Angle iron for nosing in Stairs including stringers, treads, landing, balusters, hand rails,cooler stand etc, including cleats, brackets, etc. Fe-290, Grade E-165 complete all as specified and directed by Engineer-in-charge.
S & F Pre - painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an color having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.
Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
Material and labour for 50 mm thick cement concrete 1:2:4 type B1 ( using 20 mm graded stone aggregate) in alternate bays finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Material and labour for 50 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection, concrete shall be laid in alternate bays néxc 3.00 m in length, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Material and labour for 75 mm thick PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub-base complete all as specified and directed by Engr-in-Charge.
Material and labour for 25 mm thick Sand cushion under interlocking paver tiles including watering and consolidation complete all as specified and directed by Engr-in-Charge.
Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60 mm thickness in grey cement and pigment with glossy finish, M-35 Grade complete all as specified and directed by Engr-in-Charge.
Material and labour for Precast cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate), block masonry with solid blocks as in kerbs, exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.
Material and labour for square rubble walling Jodhpur type regular course well bonded bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge.
All as item No 20 here-in-before but except stone complete all as specified and directed by Engr-in-Charge. (stone obtained from item 19 shall be re-used after cleaning etc).
Extra over on stone walling for hammer dressing to face stone with maximum depression on face from straight edge n.exc. 20mm and dressing faces beds and joints as specified to square rubble walling regular course Jodhpur type complete all as specified and directed by Engr-in-Charge.
Material and labour PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coppings, benching, kerbs, edges etc including necessary form work complete all as specified and directed by Engr-in-Charge.
Material and labour for machine cut Kota stone 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror race) as in flooring/treads of steps over and including 20 mm thick screed bed in CM 1:6 as approved and directed by Engr-in-Charge.
Material and labour for machine cut Kota stone 20-25mm thick in riser of steps, skirting dado and pillar laid over 10 mm thick screed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (mirror race) as approved and directed by Engr-in-Charge.
Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and directed by Engineer-in-charge.
Material and labour for keyed pointing to stone squared coursed masonry in CM (1:4) complete all as specified and directed by Engr-in-Charge.
Material and labour for extra over rendering or plastering for work in Isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting, drips moulds and similar work exc 15 cm but n.exc 30 cm in width or girth including cutting to edges, all miters and stopped ends,etc complete all as specified and directed by Engr-in-Charge.
Material and labour for 15 mm thick rendering in CM 1:4 on stone masonary surfaces with WPC and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note: WPC as supply only shall be measured and paid separately.
Material and labour for rendering 10 mm thick in cement mortar 1:4 with WPC on fair faces of brick work or concrete surface without using extra cement complete all as specified and directed by Engr-in-Charge. Note : WPC as supply only shall be paid separtely.
Supply only water proofing compound complete all as specified and directed by Engr-in-Charge.
M&L for two coats of cement base paint on new plastered surfaces of walls including necessary preparation of surfaces all as specified and directed.
AJEET ENTERPRISES
Bhawani Enterprises
M/s Vishaka Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .