PROVN OF BYPASS ROAD INCLUDING CHAIN LINK FENCING FOR AT BEG AND C ROORKEE

Amount

Surface dressing averaging 15 cm deep and getting out in soft / loose soil including clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, trees not exceeding 30cm girth and removing rubbish out side of defence land complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation etc. and getting out, in any type soil complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for laying cables or pipes etc. and getting out, in soft / loose soil, complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and exc 1.5 mtr but n.exc 3.0 mtr in depth for laying cables or pipes etc. and getting out, in soft / loose soil, complete all as specified and directed.

Returning & filling in including spreading leveling watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Excavating over areas, n.exc 1.5 m deep and getting out, in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers n.exc 30 cm thick; .watering, ramming/rolling and finishing to required size, shape, etc., n.exc 1.5 m high from base, complete all as specified and directed.

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Removing excavated material (soil) exc 50 mtr but n.exc. 100 mtr and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Removing excavated material (soil) exc 100 mtr but n.exc. 250 mtr and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Removing excavated material (soil) exc 250 mtr but n.exc. 500 mtr and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Bringing approved earth (soil) from outside A1 Defence land and Spreading and levelling in layers n exc. 25 cm thick & well ramming, complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings spread, rolled/rammed including watering and levelled in layers n.exc 15 cm thickness (compacted) to gradient and camber required complete all as specified and directed.

Rolling and consolidation of formation surfaces in cutting with power roller exc 8 tonne & n exc 12 tonne in required level, gradient and camber including filling depression with approved earth occurred during rolling, complete all as specified and directed.

Material and labour for Soling (or sub base) spread thickness 150 mm with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber with power roller exc 8 tonne & n exc 12 tonne complete all as specified and directed.

M&L for 150mm thick WBM (compacted thickness) in two layers, each layer consisting of 75 mm thickness with coarse aggregate (granite/trap/basalt stone) of grading 2 (63 to 40 mm size), spread, rolled and consolidated with 8 to 12 tonne power road roller to gradient and camber required, complete all as specified and directed.

Preparation unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc., complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer of paving bitumen VG-10 grade @ 10 Kg/10 Sqm on WBM surface, complete all as specified and directed.

M&L for premixed bituminous macadam laid, rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less), laying with machine & mixing in hot mix plant using binder content (paving bitumen VG-30) @ 4% by weight of total mix, rolled and consolidation with 8 to 12 tonne power road roller complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer of paving bitumen VG-10 grade @ 5 Kg/10 Sqm on bituminous macadam surface, complete all as specified and directed.

M&L for providing bituminous premix semi-dense asphaltic concrete 40mm thickness (consolidated) with paving bitumen VG-30 @ 5.5% binder content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne power road roller, complete all as specified and directed.

M&L for continuous brick edging using bricks class designation 75 old size, width equal to the length of the bricks laid dry on edge vertically, complete all as specified & directed.

M&L 600 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified and directed.

Furnishing and laying of the sods of perennial shrubs forming grass on embankment slope, verges or other locations including preparation of ground, stacking the sods and watering as per technical requirements, complete all as directed.

M&L for boulder pitching, laid dry, hand packed tightly, pitching is grouted with cement and sand mortar 1:6, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc., complete all as specified and directed.

M&Lfor cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc., complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete etc., complete all as specified and directed.

M&L for providing pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for providing pre-cast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders and the like including weathering, slightly rounded or chamfered angles and throating etc and setting in cement mortar 1:4, complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 m mean radius built in old size bricks in cement mortar 1:4, complete all as specified and directed.

M&L for brick work with sub class 'B' old size bricks, straight or curved on plan to any radius as in half brick thick wall built in cement mortar 1:4, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surface, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for flush pointing to brick walls in cement mortar 1:3, complete all as specified and directed.

M&L for PVC (SWR) pipes 110 mm dia, single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.

M&L for PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed.

M&L for Hand packing of broken stone (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) in surface channels and drains etc., complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) in surface channels and drains etc., complete all as specified and directed.

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto, complete all as specified and directed.

M&L for RCC M-30 (Design Mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC M-30 (Design Mix) in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses, complete all as specified and directed.

M&L for RCC M-30 (Design Mix) in column, pillars, post/strut, piers etc., complete all as specified and directed.

Use & waste formwork to sides of concrete foundation, footings, column bases and plinth beams, similar work etc, vertical or to batter, rough finished surface complete all as specified and directed.

Use & waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, fair finished surface complete all as specified and directed

Use & waste formwork to sides of pillars, posts, struts, piers, columns and stanchions, fair finished surface complete all as specified and directed

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M&L for mild steel round bars 10 to 12 mm dia in cut to length, bent to shape required including cranking, bending spirally for hooping for fixing independently in the chain link fencing for wooling fencing chain links mesh including tieing with GI wire not less than 0.90 mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel rolled section in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 , complete all as specified and directed.

Supply only Chain link mild steel galvanized fencing of size 100mmx100mm with diameter of wire each way not less than 4.80 mm and weight not less than 2.85 Kg per Sqm, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed. (Note:- Chain link fencing shall be measured as supplied only under respective BOQ item)

S&F rolled mild steel section framed work as in door & gate of ornamental design indicated in drawing , confirming to Fe-290, grade E-165, with gusset plates, rails braces etc. drilled for fixing steel sheeting or other covering, including pintel hinges, stops, hand made sliding bolt etc, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm & n.exc 15cm long, dia of bolt 11-15mm, complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

S&F punched type concertina coil of 1050 mm dia and having spiral turn 50/51 in each coil and minimum weight 15.50 Kg per coil, including tying with galvanised mild steel wire, staples or steel pins, etc., complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces not exceeding 10 cm width or girth, any description not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth, any description not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coat of cement base paint over one coat of white cement priming coat complete all as specified and directed.

M&L for providing Gabion wall structure with mechanically woven double twisted hexagonal shaped highly galvanized iron wire mesh gabion boxes of size as per IS:16014-2013 specification, MORTH Clause-2500, of required sizes, mesh type 10x12 (D=100mm with tolerance of plus/minus 2%), Zink+PVC coated, mesh wire diameter 2.70/3.70mm, mechanically edged/selvedged with partitions at every 1 mtr interval and shall have minimum 10 nos of opening per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm (ID/OD), supplied @ 3% by weight of Gabion boxes, filled with stone boulders hard, angular to round, durable having minimum density 22KN/Cum and Los Angeles Abrasion Value not more than 45, with least dimension of 200mm placing in layers, complete all as per guidelines given in IRC:SP-116-2018 and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, if cement concrete is reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and directed. Note:- Old retrieved reinforcement will be considered in scrap iron under schedule of credit)

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross sectional area 70 sqmm, 3.5 core, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of cross sectional area 16 sqmm 4 core, complete all as specified and directed.

M&L for screened Sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable) complete all as specified and directed.. Note :- Punned thickness 18 cm will be measured for payment.

Supply and lay GI tubing light grade of size 40 mm dia for protection of GI strips/cable laying / fixed in wall / poles/ trenches with all fittings, complete all as specified and directed.

Supply & laying sub class 'B' bricks, old size, for protection of cable cover, laid flat adjacent to each other across the length of cable complete all as specified and directed.

Supply, transportion, erection and fixing steel tubular swaged role type 410 SP-31, 9 metre long, with cast iron base plate, finial taper plug and nuts, bolts, including two coat of aluminium paint on exposed surfaces of steel poles and 03 nos strips / bands painted with post office red and navy blue colour (300mm each) in alternate from pole coping/plinth, including pole number with black Japan paint 2.5 cm height in 3 inch dia circle, complete all as specified and directed. Makes:- Fabrico (India) Pvt Ltd/ India Tube Co./ M/S Sohan Lal & Sons/ National Tube Co. (Note:- Necessary excavation and PCC for fixing poles shall be measured & paid separately under respective items)

Supply and fixing 40 mm bore GI pipe, light grade, bracket 1.5 mtr long bent to shape fixed with 02nos mild steel clamps made out of FI 40X5mm including suitable size nut, bolt & washers, duly painted with two coat of aluminium paint over one coat of red oxide primer, complete all as specified and directed.

M&L for earthing complete with using galvanised mild steel earth plate (electrode) 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 mtr depth below ground level with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15cm all round the plates using GI wire 4 mm dia as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch / control board pole at another end. GI earth lead protected in and including 15 mm bore GI light grade pipe from upper end of earth plate upto equipment with & including 20mm bore GI pipe medium grade as water pipe from earth chamber to upper edge of the earth plate. GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B1 (using 20mm graded stone aggreagte) as in pit chamber, 50mm thick pre-cast RCC cover reinforced with 8mm TMT bars @100mm C/C both ways and lifting handles of 10mm dia mild steel round bars etc complete as per electrical plate No-03 of SSR (Part-I): 2009 and testing on completion all as specified and directed. Note:- (i) If the desired earth resistance 04 Ohms or less is not found then item shall be redone by contractor at no extra cost. (ii) Cost of GI wire 4 mm and 15mm bore pipe light grade upto 7.5m is deemed to be included in the rate quoted for this item.

S&F PVC junction box factory made of size 350x250x150 mm pole mounting type, with 4 Nos aluminium bus bar 40 Amps rating mounted on porcelain insulator, cable gland, lugs consisting DIN type rails for fixing MCB SP 6 Amps, 10 KA, including mild steel flat iron clamp made out of 40x5mm FI and nut, bolts & washers duly painted with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. (Note:-Rate of MCB shall be included in the quoted unit rate) Make:- Syntec/Hensel/Napture

Supply and fixing LED street light luminaire 60 watts with pressure die-cast aluminum alloy housing with toughened glass alongwith prismatic polycarbonate diffuser and LEDs with secondary optic/lens and IP-65 protection, working on 240 volts, 50 Hz with appropriate driver PF>0.98 having over voltage protection upto 440 volts, surge protection level > 10 KV, complete all as specified and directed. Make:- Havells Model-ENDURAOMNIPLUSSL60WLED757SASYTOPC/ Make-Bajaj Model-EXNT P 72L WH PO PC SD/ Make-WIPRO Model-LR02-671-XXX-57-G3/ Make- Crompton Model-LST-60-CDL-M Notes:- (i) Contractor has to be given warranty of minimum for 03 (Three) years for street light fittings including driver for any defects developed during the period. (ii) Contractor shall submit the third party LM 79 report from any NABL approved laboratory. (iii) The light fitting should have BIS, CRS number.

S&F street light timer panel suitable for three phase supply including astronomical digital timer, contactor three phase, MCB TPN 40 Amps for incomer and outgoing for overload and short circuit protection, 40 Amps, 440 volts, complete all as specified and directed. (Make:- Havells Cat No.IHXTS0912A or equivalent model in Legrand/C&S)

Labour and T&P for horizontal boring holes for 32-50 mm bore GI pipe under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine complete all as specified and directed. (Note:- GI pipe shall be measured separately under respective item)

Note : Tenderers may note that amount of credit Rs 375557.50 will be deducted from the total amount arrived, at the time of Acceptance of contract.

VEE SONS BUILDERS PVT LTD

BHARAT ASSOCIATES PVT LTD

M/s Ravindra Kumar Gupta & Sons

RAJESH KUMAR SANJAY GUPTA

M/s Chitter Mal & Co.

S. K. CONSTRUCTION

M/S MANI GARG CONTRACTOR