PROVN OF SHED FOR WASHERMAN WITH HARDSTANDING ALONGWITH 03X WASHING POINT IN 332 MED REGT AT RAIWALA MIL STN

Amount

Surface excavation n. exc. 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed by Engr -in- Charge.

M&L for moorum / red bajri filling in floor laid in layers n.exc. 15 cm thick, spread levelled and rammed including watering complete as directed

M&L hardcore (broken stone) of gauge not exc 63 mm, deposited spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

M&L for cement concrete Type D-2 1: 4 :8 (40 mm graded stone aggregate) as in sub base of floor.

M&L for PCC Type B-1 1:2:4 (20mmgraded stone aggregate ) in floor , finishing cement concrete surface even and smooth with out using extra cement

S&F glass dividing strips 3mm thick and 38 mmn width fix in floor all as directed.

Excavation in post holes ( or similar holes)each n. exc. 0.5 cum getting out ,returning ,filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm in any type of soil.

M &L for cement concrete Type B2 1:2:4 (40 mm graded aggregate) in foundation filling

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out in any type of soil.

Brick work with sub class‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6

M&L for rendering 15 mm thick on fair faces of brick work in CM 1:4 on walls , finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 on walls with rough finished surface mixed with polymer modified repair mortar (SBR Latex liquid polymer will be mixed as per manufecture direction ,complete all as specified and directed.

Supply only SBR Latex liquid polymer of approved make

M&L for cement concrete Type C-2 1: 3 :6 (40 mm graded stone aggregate) as in surface channels and drain .

M&L for 75mm thick cement concrete, type C2, 1:3:6 (using 40mm graded agg) in plinth protection, path etc and finished surface even and smooth without using extra cement complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240

Preparation of new steel surfaces of any description exc. 10 cm in width or girth and applying two coat of synthetic enamal paint over a coat of red oxide.

S &F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified.

S &F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified.

S&F clamps for fixing of valley gutters in roof and rain water pipes

S&F PVC (SWR ) pipes single socketed in any length with rubber ring joints fixed to wall 110 mm dia .

S&F PVC (SWR ) bends any radius 110 mm dia .

Returning filling in including spreading levelling ,watering and well ramming of soil in layers n. exc. 25cm thick.

Removing excavated material n. exc.50m and depositedwheredirected at level n.exc. 1.50m above the starting point.

M&L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc including Screed bed or bedding layer of mortar 15 mm thick CM 1:4 for laying floor finished set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface.

M&L for glazed ceramic coloured tiles in vertical surface 350 x 250X 7mm /450X 350X7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, over 10 mm rendering in CM 1:4, complete all as specified and directed.

S & F tubes, 20 mm dia medium grade galvanised steel, with all fitting and fixed complete to walls and ceilings or laid in floor,and connection to water supply main line.

S&F bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15 mm dia

TARUN ENGINEERING WORKS