112-22Mararikulam South GP 2021-22 Victoria Kakki road tarring ward 12

Amount

od1268314/2021_2022 : Construction of subgrade and earthen shoulders<br>Construction of subgrade and earthen shoulders with approved materials obtained from borrow pits with all lift and leads transporting to site, spreading, grading to required slope and compacted to meet the requirement of Table 300.2 with lead up to 1000m as per Technical Specification clause 308.1

od1268317/2021_2022 : Filling up low lying and water logged areas with local material/ Quarry muck, spreading in layers levelling the top at the site and consolidation by ramming etc. complete

4.9 : Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead

75.5.1.1pb : Prime Coat - Low porosity - With Packed Bitumen Rates <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

75.5.2.3pb : Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.5.9.1.2pb : 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 - Packed Bitumen Rates<br> Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. <br> Case - I By Manual Means <br> (II) Bitumen (S-65)

75.5.12.A.3.2pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <br> Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 <br> A. By Manual Means <br> Case III : Type C <br> (II) Bitumen (S-65)

3.5.1 : Excavation in Cutting in Soil by manual means with lead upto 50 m Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

od1268336/2021_2022 : Stone Masonry Work in cement mortar in foundation compete ass per drawing and technical specification clauses 702,704,1202&amp;1203&lt;br&gt;III. Random Rubble Masonry&lt;br&gt;II. In cement mortar 1:4

od1360374/2021_2022 : DR Masonry with hard stone in foundation and super structure including packing to compactness to lines and levels, cost and conveyance of all materials labour charges etc. complete as per approved drawings and relevant technical specifications

ANIL KUMAR R

Bidder Name

SIBI FRANCIS

ANIL KUMAR R