Repair/ maintenance of internal wiring and re- winding of Fans, Geyser and allied works at Cheer Bagh, SP Road, Beecher road and OTM accn of CMP, 501 FSEG, 314 FD WKSP, 127 TA, 12 GARH RIF under AGE E/M-II of GE Dehradun.

Amount

Taking down carefully copper /aluminium point wiring (light, fan , socket or power) complete, fittings such as switches, ceiling roses, pendants, regulators sockets light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/floors and reuse the serviceable fittings under respective items complete all as directed.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including concealed rigid PVC conduit medium grade including accessories incl cutting chases etc along with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch .

All as per Item No 2 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete.

All as per Item No 2 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete.

All as per Item No 2 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 2 mentioned here-in- before but One light point controlled with switch 2 way complete all as specified.

All as per Item No 2 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in existing steel/PVC conduit with continuous earth wire 1.5 Sqmm FRLS PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch.

All as per Item No 8 mentioned here-in- before but one three pin 5 Amps socket out let on the same board with other switches complete.

All as per Item No 8 mentioned here-in- before but one three pin 5 Amps switch socket out let on the independent board with other switches complete.

All as per Item No 8 mentioned here-in- before but One bell/buzzer point controlled by bell push complete all as specified .

All as per Item No 8 mentioned here-in- before but one two way point controlled with switch 2 way complete all as specified.

All as per Item No 8 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 sq mm PVC insulated FRLS copper conductor and 1.5 Sqmm FRLS copper conductor for continuous earthing complete.

S & F Switch piano flush type single pole one way 230 Volts 6 Amp complete all as directed.

S & F Switch piano flush type single pole two way 230 Volts 6 Amp complete all as directed.

S & F Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete.

S & F bell push flush type 5 Amps 230 Volts single pole complete.

Supply and fixing Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type IS: 1239-1988 marked with valid CML No complete all as specified.

Supply and fixing Switch piano flush type, single pole, one way, 230 Volts 15/16 Amps marked with valid CML No. complete all as specified

S & F calling bell ding dong type AC 230 Volt single pole Make:- Havells/Anchor/Cona.

S & F stepped type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts, 6 Amps 120 watts .

Supply and fixing Ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified

S&F anglurar Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete. Make:- Havells/Anchor/Cona.

Supply and fixing decorative polycarbonate modular white frame for fixing of modular switches and cover plate suitable for 12 modules 3 row and blanking plate if any required for spare module incl taking down old modular/MS Sheet box complete. Make :- Anchor Roma/Cona/Havells.

All as per item No 24 here and above but 8 module single or double row as per site requirement complete all as directed by Engr incharge. Make of Holder :- Anchor Roma/Cona/Havells.

All as per item No 24 here and above but 6 module complete all as specified. Make :- Anchor Roma/Cona/Havells.

All as per item No 24 here and above but 3 module complete Make :- Anchor Roma/Cona/Havells.

All as per item No 24 here and above but 1 or 2 module complete all as specified. Make :- Anchor Roma/Cona/Havells.

S&F Modular switch 1 way 06 amp single pole complete all as specified. Make :- Anchor Roma/Cona/Havells. Make :- Anchor Roma/Cona/Havells.

S&F Modular switch 2 way 06 amp single pole complete all as specified. Make :- Anchor Roma/Cona/Havells.

S&F Modular switch 1 way 16 amp single pole complete all as specified. Make :- Anchor Roma/Cona/Havells.

S & F of modular socket outlet 6/16A- 5 pin combined of 02 module complete all as specified. Make :- Anchor Roma/Cona/Havells.

S & F of modular socket outlet 6A-5 pin combined of 02 module complete all as specified. Make :- Anchor Roma/Cona/Havells.

S & of moduar bell push 6 Amp 1 module complete all as specified. Make :- Anchor Roma/Cona/Havells.

S & F of modular fan step regulator 120 W-2 module complete all as specified. Make :- Anchor Roma/Cona/Havells.

S&F in repair round shaped LED downlights of capacity 12 Watt suitable for fixing in false ceiling with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Eveready or equilent in Philips/Wipro

S&F in repair round shaped LED downlights are made with injection moulded polycarbonate housing with snap fit/screw fit arrangement of polycarbonate/aluminium spun ring for surface mounting of capacity 12 Watt with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make Eveready or equilent in Philips/Wipro

S&F for replacement LED tube rod 18 watt made out of polycarbonate acrylic diffuser lumen out put 1800 lumens complete all as specified & directed. Make Eveready or equilent in Philips/Wipro

S&F LED bollard type fitting 10 Watt cpacity 650 mm height, LED bollard AFlare fitted with low glare diffuser with IP 65 protection, complete with necessary pcc foundation including taking down existing old pattern unserviceable light fitting all as specified and directed. Make Crompton Cat Part No.LBSL 1-10-CDL or equivalent in Havells/ Bajaj

S&F in repair mirror light decorative compact luminaries with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size . Make :- Eveready/Wipro/Philips.

S&F in repair decorative wall mounting light fitting complete made out of polycarbonated suitable for and incl retrofit 9 watts LED bulb complete all as specified. Make :- Eveready/Wipro/Philips.

Supply and fixing in repair 8/10 Watts LED Bulk head light fitting die cast alluminum body and defused glass cover complete. Make :- Eveready/Wipro/Philips.

S&F in repair LED tube light fitting batten type all in one single phase 20 W with lamp 6500/4000 K complete pre-wired all accessories. Make :- Eveready/Wipro/Philips.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.. Make :- Eveready/Wipro/Philips.

S & F in repair post top laterns fully cast aluminium body finished with polyurethane paint (with prior treatments) with acrylic window cover (Total length 400 mm (15.75 Inches) & Max Breath 209mm (8.25 Inches) with B22 ABS holder provided suitable for fixing on existing pole. Make :- Mepro cat part No PTL-07 or equivalent in wipro, philips.

Taking down carefully existing street light / other light fittings complete of any description and in any position and removing from site complete all as specified and directed.

Supply and fixing in repair LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified incl taking out old u/s fitting complete. Note : The unit rate for painting to bracket with one coat of red oxide primer and two coat of alluminium paint before fixing is deemed to be included in the quoted rate for light fittings. Make :- Eveready/Wipro/Philips.

Supply and fixing in repair LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Note : The unit rate for painting to bracket with one coat of red oxide primer and two coat of alluminium paint before fixing is deemed to be included in the quoted rate for light fittings Make :- Eveready/Wipro/Philips.

M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with Two runs of 6 Sq mm as current carrying conductor and one run of 6 Sq mm as earth conductor PVC insulated FRLS cable with multi stranded copper conductor of nominal cross section area as under and drawing into and including concealed PVC non metallic rigid conduit medium grade complete all as specified incl taking down old u/s sub main wiring complete. Note:- Three runs of wire and one run of pipe shall be measured as one meter only for payment purpose.

Supply installation testing and commissioning of integrated call bell station for 20 beds with the following accessories :-

S&F Surface mounting box 1 module. Legrand Cat Part No 573491 or equivalent in Havells/ Cona.

S&F Modular plate of 01 Module. Legrand Cat Part No 575700 or equivalent in Havells/ Cona.

S&F 6 Amp bell push of 1 Module. Legrand Cat Part No 573414 or equivalent in Havells/ Cona.

S&F Call resgister 1 Module. Legrand Cat Part No 573415 or equivalent in Havells/ Cona.

S&F Point wiring for call bell point with 1.5 sqmm single core copper cable.

S&F Lables for call register 1 to 20. Legrand Cat Part No 573606 or equivalent in Havells/ Cona.

S&F Buzzer 1 Module. Legrand Cat Part No 573442 equivalent in Havells/ Cona.

S&F 24 module plate with metal frame. Legrand Cat Part No 573442 or equivalent in Havells/ Cona.

S&F Red indicator light 2 Module. Legrand Cat Part No 572453 or equivalent in Havells/ Cona.

S&F Surface mounting box 24 module. Legrand Cat Part No 573573 or equivalent in Havells/ Cona.

Supply only cleaned salt not less than 35% Nacl for softening of water as per sample complete all as specified and as directed.

M&L for repairing, servicing and overhauling including vacating and filling of filters, recommissioning flow meter and reinstalltion of water softening plant suitable to deliver 1000Kg/hr soft water feeding two Non-IBR type boiler 600 Kg/hr water having hardness less than 5 PPM installed at MH Dehradun by auth OEM with replacement of following parts :- Note: Fixing charges of unserviceable part deemed to be included in the quoted rate for servicing / over hauling. Make :- Thermax

Supply only following items / parts suitable for water softening plant repaired under item no 52 above:-

Sand for NGMF 20

Strainer

Resin 220NA for water softner

Flow Meter

Supply and fixing in repairs CI butter fly valve 80 mm dia with iron wheel head, gun metal seat complete (conforming to IS 780) ISI marked complete all as specified.

All as per item No 54.00 here and above but 100 mm complete all as specified.

All as per item No 54.00 here and above but 150 mm complete all as specified.

Supply, fixing, installation and testing of 15mm dia, Quartzoid bulb type G.M. Sprinkler Head (Pendent/ Upright/ Conventional, as required) (UL/ FM/ LPC/ TAC listed/ Approved chrome plated complete with decorating plate (Ressette). Set to operate at 68۫º C in repair.

S&F in repairs installation and testing 15mm dia, quartzoid bulb type G.M. Chrome plated side wall extended range (4.5mtr to 6.5 mtr) sprinkler head set to operate at 68۫ºC (UL/FM/LPC/TAC listed/Approved) complete with decorating plate.

S&F in repairs hydrant valve stainless steel with single outlet, grade with 80 mm N.B. flanged inlet, 63mm female instantaneous outlets, complete with blank caps chains, bearings IS:6290 mark and having ISI MARKED (Yard Hydrant)

All as per item No 59.00 here and above but double headed complete all as specified .

S&F in repairs fire hose cabinet to house 02 Nos hose pipe, Nozzle, branch pipe and fire mean axes, including all other related accessories fabricated from 16 gauge M.S. sheet of fully welded construction of size 800x600x250 mm min having front 4 mm thick glass door written with "BREAK IN CASE OF FIRE" painted with two coat of signal red paint over a coat of red oxide primer and two coat of brilliant white paint over one coat of red oxide primer internally with locking arrangement complete.

S&F in repairs first aid hose reel (swinging type) including 30 meter long 20 mm internal dia rubber lined hose reel tubing,25 mm dia stainless steel stop valve, shut off nozzle of sufficient length incl fixing of one end with hose real nozzle and other end to hose real pipe with wet riser with suitable arrangement complete all as specified, ,ISI MARKED

Supply only branch pipe stainless steel 63 mm dia instaneous type inlet made thread outlet 15 mm dia Nozzles.ISI Marked complete all as specified.

M&L required for refilling of 5 KG ABC type fire extinguisher of 70-90% MAP complete incl decaning of existing material and refilling with fresh powder with cartridge etc complete incl disposal of existing retrieved material as per CPCB norms complete.

All as per item No 64.00 here in above but 4.5 KG CO2 type

All as per item No 64.00 here in above but 3.0 KG CO2 type

All as per item No 64.00 here in above but 2.0 KG CO2 type

All as per item No 64.00 here in above but 9.0 Ltr water foam type

M&L for Distribution board Vertical type TPN 4 Way double door, suitable for MCCB 63/100 Amps MCCB as incoming and MCBs for outgoing factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection incl taking out old u/s DB complete all as specified. Note:- DB and MCCB/MCB shall be of same make

S&F in repair for MCCB 415 Volts, 63 Amps, rating 4 Pole (triple pole and neutral), adjustable Thermal Magnetic release (Service Breaking Capacity 16KA (Ics=100%Icu)-05 Nos.

M&L in repair Distribution board SPN 8 Way double door, for mounting MCBs isolator, ELCBs etc factory made, IS: 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel, neutral and earthing link and bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and baked at high temperature, painted in seven tank process. The DBs shall be of IP 43 protection. Note:- DB and MCCB/MCB shall be of same make

S&F in replacement Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 10 KA C series complete all as specrified & directed

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 to 100 Amps and current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make :- Legrand/C&S/ABB.

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 25 to 63 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning. Make :- Legrand/C&S/ABB.

Supply, laying & connecting XLPE insulated armoured, heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16 Sqmm 4 core including fixing lugs, cable gland etc including bare conductor duly insulated with Pvc heat shrinkable sleeve 1.1 KV grade at both end complete all as specified and directed including taking out old u/s cable.

All as per item No 76 here-in-before but 10 Sqmm 4 core complete all as specified.

All as per item No 76 here-in-before but 25 Sqmm 4 core complete all as specified.

All as per item No 76 here-in-before but 35 Sqmm 3.5 core complete all as specified.

All as per item No 76 here-in-before but 50 Sqmm 3.5 core complete all as specified.

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in any type of soil for foundation, cable laying etc complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified.

M&L for Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified.

M&L for Bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified.

S&F in repair 'Light' grade galvanised steel tubing with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

S&F in repair 'Light' grade galvanised steel tubing with all fitting laid in trenches, fixed to wall and floor of 80 mm dia for cable protection complete all as specified and directed.

M&L Earthing complete with galvanized steel earth plate electrode 600cmx600cmx6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level, earth plate surrounded by and packed with a 15 cm thick layer of char coal dust and common salt, earth lead GI wire 4.00 mm. dia by means of bolts, Nuts, Check Nuts and washers of galvanized iron and thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe medium 15 mm. bore and water pipe 20 mm. bore GI light grade with funnel and wire mesh PCC chamber in cement concrete (1:3:6) type C-2 & 75 mm thick RCC (1:2:4) type B1 cover slab reinforced with 8mm TMT bars 100mm c/c both ways complete all as specified & shown in elect plate No. 3 of SSR part I of 2009 and testing on completion.

S&F in replacement tamper proof single phase electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including cable connection, proper sealing with barcode with PVC seal. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL (Note:- Old unserviceable meter will be deposited to E/M store yard)

S&F in replacement tamper proof three phase electronic meters temper proof LCD display with polycarbonate cover 415 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH including cable connection, proper sealing with barcode with PVC seal. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. Make:- Secure /L&T/BHEL (Note:- Old unserviceable meter will be deposited to E/M store yard)

S&F Meter Distribution Borard made out of Thermoplastic polycarbonate of size 600x600x170 mm (dust proof & weather proof ,Shock proof, rust proof ,corrosion free ,acid & Chemical resistance ,UV resistance , Halogen free & freerecyclable material) wiyh 230v Ac 50 HZ 3 Wire , Gasket shallbe embedded with T-locking arrangement and suitable for mounting of Electronic Meter -04 Nos incuding electrical connection with excisting system and sealing properly & taking out u/s broken/rusted box of any size and type complete all as specified and directed. Make Hensel/Secure/Sintex.

S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep.

S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep.

S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 mm x 150 mm and 50 mm deep.

S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 250 mm x 200 mm and 50 mm deep.

S&F PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 350 mm x 300 mm and 50 mm deep.

Taking out of ceiling fan from site or store yard of any make, any description 1200 / 1400 mm sweep and any position/locations for repairs, servicing, overhauling, if required, dismantling and opening the ceiling fans, removing the burnt out copper winding and insulating material such as illuminous paper, glass sleeving, cleaning the slots and rewinding the same with supper enamelled copper winding wire of existing wire gauge with insulating material, insulating varnishing and reassembling the ceiling fan after replacement of unserviceable parts such as split pin, lock nut, rubber packing, clamp of condenser, blade nut, rubber reel insulator, nut bolt, plastic fan canopy and including three core (work shop cable) stranded copper conductor of size 23/0.0076 mm insulated as per required length. All burnt ceiling fan to be check by the Engr in charge concern JE in MES store yard and maintain register. Checking of burnt ceiling fan rewinding and testing will be completed at E/M Store yard all as specified and as directed.

Taking out of exhaust fan from site or store yard of any make, any description of 450mm sweep and any position/locations for repairs, servicing, overhauling, necessory lathe work if required, (grinding, polishing) etc. dismantling & opening the exhaust fans removing the burnt out copper winding and insulating material, illuminous paper, glass sleeving, cleaning the slots and rewinding the same with supper enamelled copper winding wire, (Make:-Atlas (Minal), National, HTP, HWP, Shital etc) with insulating material, insulating varnishing and reassembling the exhaust fans after replacement of unserviceable parts such as frame nut, rubber packing, clamp of condenser, and including PVC three core (workshop cable) stranded copper conductor cable of size 23/0.0076 mm insulated as per required length. Checking of burnt exhaust fan rewinding and testing will be completed at E/M Store yard all as specified and as directed.

All as per item No 98 here-in-before but exhuast fan of size 230/250 mm sweep.

All as per item No 98 here-in-before but exhuast fan of size 300 mm sweep.

Supply only, the following new spare parts suitable for the ceiling / exhaust etc. of any description and sweep:- Note:- Fixing & testing charges of these items are deemed to be included in the rates quoted under Sch 'A' item No 97 to 100 above.

Ball bearing campack type 6302-2Z Make SKF/HCH/NBC

Ball bearing campack type 6201-2Z Make SKF/HCH/NBC

Ball bearing campack type 6202-2Z Make SKF/HCH/NBC

Ball bearing campack type 6203-2Z Make SKF/HCH/NBC

Ball bearing campack type 6204-2Z Make SKF/HCH/NBC

M&L for Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc including rewriting MES No of fan in capital letters of height not less than 20 mm on body with black paint complete all as specified and as directed.

All as per item No 102 here-in-before but exhuast fan any make and sweep with synthetic enamel grey paint complete all as specified.

S&F, in replacement of hanging clamp of ceiling fan with nut bolt , rubber real insulator and split pin complete all as specified and as directed.

S&F in repair aluminium cast metal Exhaust fan blade complete set with necessary M S nut, bolts & washers suitable for exhaust fans of 230 / 300 mm sweep of any descriptions complete all as specified and as directed.

S&F in repair only Exhaust fan blade complete set of iron leaf (four) with neccessory MS nuts, bolts & washers suitable for exhaust fans 450 mm sweep of any descriptions complete all as specified and as directed.

S&F in repair only aluminium cast metal ceiling fan blade complete with neccessory MS nuts bolts & washers suitable for ceiling fans of any descriptions complete all as specified and as directed.

Disconnecting and taking down Existing unserviceable geyser of any description and capacity ( 25/50 Ltr.) incl water and electric connections and reinstallation at same locations after repairs, cleaning and descaling complete all as specified and directed ( Note : spare parts shall be measured and paid separately under relevant item)

S&F in repairs new water tank steel inner shell of cap 25 ltr.having wall thickness notless than 1 mm all as specified and directed

S&F in repairs new water tank steel inner shell of cap 50 ltr.having wall thickness notless than 1 mm all as specified and directed

S&F in repair heating element(square /triangular/fine threaded type) of cap 1.5 KW ISI mark all as specified and directed. Make:- Escort, Das pass, theeta,

S&F in repair heating element(triangular/fine threaded type) of cap 2 KW ISI mark all as specified and directed. Make:- Escort, Das pass, theeta,

Disconnecting & taking up or down exisiting US thermostat of any description from at site and S&F thermostat assembly of range 200 C to 850C of any description suitable 25/50 Ltr cap geysers ISI mark all as specifiedand directed.Make:- Recold, Usha, Girish,

S&F in repair indicator lamp 230 Volt of red and green (circular/rectangular type) all as specified and directed. Make:-L & T, BCH, C & S electric

S&F in repair MS outer cover of any shape of cap 25 Ltr all as specified and directed.

S&F in repair MS outer cover of any shape of cap 50 Ltr all as specified and directed.

S&F in repair new flange assembly of description made up of copper/brass for geyser of cap 25 ltr as per site requirement ISI mark all as specified and directed.

S&F in repair new flange assembly of description made up of copper/brass for geyser of cap 50 ltr as per site requirement ISI mark all as specified and directed.

S&F in repair new flange assembly with element of description made up of copper/brass for geyser of cap 25 ltr as per site requirement ISI mark complete all as specified and directed.

S&F in repair PVC connection complete with brass coupling/union rubber washers etc 450mm long suitable for 15mm dia all as specified and directed Make :-Prayag. Symet,

All as per item No 120 but 300mm long complete all as specified

All as per item No 120 but 600mm long complete all as specified

S&F in repair packing in position fibre grass wool between inner and outer shell of geyser of any description and in any position complete all as specified and directed.

M&L for preparation of surfaces of geyser of 25 ltr cap of any description by applying filler compound and applying two coats of synthetic enamel white paint complete incl writing MES no with black paint height not less than 20mm in the style/pattern as approved and directed.

All as per item No 124 above but cap 50 ltrs complete all as specified

S& F Capacitor of 2.5 mfd for ceiling / exhaust fan complete all as specified. Make :- Havells/EPCOS/Universal/Aisan.

S& F Capacitor of 3.15 mfd for ceiling / exhaust fan complete all as specified. Make :- Havells/EPCOS/Universal/Aisan.

S&F PVC twin with twisted flexible card of size 23/0.0076 multi strand copper wire for connection to fan etc complete all as specified. Make :- Polycab/Havells/KEI

S&F in repair bush made out of Gun Metal as required all as directed by Engr-in-Charge.

Supply and fixing in repair fastener with washer 02 Nos washer for fixing of geysers/exhaust fan complete all as specified and directed by Engr-in-charge

HARSH ENTERPRISES

M/s Kamal Traders