Periodical Maintenance of Link road from Link Road to Village Dhandol (Road Number HP0407VR0038) Km 6/00 to 7/00 Under AMP 2026-27 (PMGSY Roads)

Repair to pot holes and removal of loose material , trimming of sides , cleaning of surface by providing tack coat , 20 mm thick pre-mix carpet and seal coat type B specification clause 1904.2 complete in all respects as per the direction and entire satisfaction of Engineer-In Charge."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the Rate of 0.225 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Providing and laying 30 mm (thirty millimeter ) thick bituminous concrete with 100 -120 TPH batch type hot mix plant producing an average output of 75 ( tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects as per the direction and entire satisfaction of Engineer-In Charge."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Road marking with hot aplied thermoplatic compound with relectorising glass baord on bitumenous surface. Profviding and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms/sqm area thickness of 2.5mm is execlusive of surface applied glass beads as per IRC:35. The finished surface to be uniform and free from streaks and holes.complete in all respects as per the direction and entire satisfaction of Engineer-In Charge."The rate quoted shall be deemed to include all taxes, duties, levies, and charges including GST, octroi, royalty, toll tax, sales tax, or any other tax as applicable and imposed by the Government from time to time."

Please Enable Macros to View BoQ information