GENERAL-Kainoor chira-CONSTRUCTION OF RCB ACROSS MANALI RIVER MECHANICAL WORKS-General Mechanical Work

Amount

Fabrication, supply & erection of MS & SS embedded parts (SS304 L Grade) for vertical lift Gate.

OD18431/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD18432/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD18433/2023-2024:Supply of MS round bar including cost of conveyance charges

85.108:Fabrication , erection and commissioning of Structural Steel Embedded parts in IS2062 Grade and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour , machinery , incidental and handling charge etc complete but exculding cost of materials already supplied

OD18434/2023-2024:Fabrication, Supply, erection and assembling of wheel track, sill seat and seal track in correct position and alignment by welding SS Embedded parts in 304L Grade as per approved specifications, drawings and directions of deptl. officer at site including cost of all materials, labour, welding, shearing, grinding etc., lead and lift, conveyance, incidental and handling etc. complete

OD18435/2023-2024:Supply of M.S Bolt with nut and washer

Supply, fabrication, painting and erection of vertical lift MS gate

OD18466/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD18467/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD18468/2023-2024:Supply of MS round bar including cost of conveyance charges

OD18469/2023-2024:Supply and fixing of chain for dogging beam of shutter

OD18470/2023-2024:Supply of SS bolt with nut and washer

OD18471/2023-2024:Fabrication and supply of Structural steel when gate and accessories as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

85.112:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350microns over the grit blasted and cleaned surface to class A standard of IS 14177 including cost of all materials , labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc complete as per the direction of departmental officer at site

85.111:Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

Supplying and fixing of flat type and angular type rubber seal for vertical lift Gate

85.116:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118:Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

Supplying and fixing 250 dia. cast steel thrust roller assembly for Vertical Gate

OD18490/2023-2024:Supplying and fixing cast steel thrust roller assembly having 250mm dia, 60mm tread width, SS(304) shaft and 22314 E self aligning spherical roller bearing and accessories as per approved specifications and drawings including cost of all materials, machineries, labour, all lift and lead, incidental and conveyance charges etc. complete.

Supply of materials, fabrication, painting and erection of hoisting bridge and covers for Hoisting mechanisms.

OD18445/2023-2024:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD18446/2023-2024:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD18449/2023-2024:Supply of aluminium sections including cost of conveyance charges

OD18491/2023-2024:Supply of aluminium plates plates including coat of conveyance

OD18450/2023-2024:Supply of aluminium round bar including cost of conveyance charges

OD18451/2023-2024:Supply of Aluminium chequered plates including cost of conveyance charges

OD18452/2023-2024:Supply of G.I. pipes 32 mm dia.

OD18453/2023-2024:Supply of M.S Bolt with nut and washer

85.124:Fabrication and supply of Hoisting bride unit in structural steel confirming to IS2062 Gr including ladder, covers for hoisting unit etc as per approved specifications, drawings and directions of departmental officer at site including cost of labour, machinery, incidental and handling charges for fixing handrails and allied works etc complete but excluding material already supplied and weight of pipes for hand rails etc

OD18455/2023-2024:Fabrication and erection of aluminium materials like chequered or plane plate, sections etc. including erection and fixing including labour, machinery for welding, grinding etc, lead and lift, conveyance, incidental and handling etc. but excluding materials already supplied.

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.136:Erection of the hoisting bridge unit including handrails , ladder and platform etc. in correct alignment and anchoring it ; setting and aligning the covers of the hoisting unit etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc complete but excluding cost of materials already supplied

Supplying, stacking, erecting and trial run of rope drum hoisting unit having 20 T capacity for shutters respectively including line shafts, wire rope, dial gauge and all other accessories

OD18472/2023-2024:Supplying and stacking of 20 Tonne capacity rope drum hoisting unit having 5.5 m lift at a hoisting speed of about 0.50m/min (+/-10%) through pulley arrangements with 4 numbers of falls on either side with 20mm tested galvanized wire rope 6/36 construction, fibre core having breaking capcity 23853 Kg and drien by TEFC squirrel cage induction motor hoist duty tyupe having capctiy not less than an 5 HP and driven through self locking worm reducer and open gear reduction unit excluding the cost of line shaft but including 2 nos. of plummer blocks for line shaft with bearings supported at proper intervals and including cost of electro magnetic thruster brake assembly, manual operating systems, electrical accessories like limit switch and other safety equipments as per drawings, specifications and statutory requirements, etc. complete but excluding cost of wire rope.

85.128:Providing Line shaft ,material : MS rolled/ forged steel

OD18474/2023-2024:Supplying and stacking 20mm tested galvanised steel wire rope 6/36 construction, fibre core having breaking capacity 23853Kg tensile designation of 1770 confirming to IS2266-2002.

85.125:Conveying and erecting in position the already supplied rope drum hoisting units ( 15T/20T/25T/30T) capacity on the hoisting bridge and correcting the alignment as far as possible manually as per the direction of departmental officer at site including cost of all labour, machinery, lead and lift and all incidental and conveyance charge etc complete

OD18475/2023-2024:Providing and fixing dial guage assembly: worm reducer, dial, chain & sprokets, needle, shafts, plummer block, etc including cost of labour, tools, incidental charges,etc but excluding plates and sections.

85.135:Conveying and Fixing wire rope already supplied to the new gates and Hoisting unit safely and conducting Trial Run

Cost for design and drawing of regulator operating mechanism, bridge etc. as per special conditions and specification given

OD18458/2023-2024:Preparing design and drawing of regulator shutters (vertical type) with rope drum hoisting mechanism, embedded parts, hoist bridge etc. as per standard specifications and submitting hard copies of all GA, fabrication and detail drawings.

HARDWARE TOOLS AND MACHINERY PROJECTS VT. LTD (BID ID -2197818)

P.Damodaran, G.R.Industries (BID ID -2199853)

Bidder Name

Kinanath V P

P.Damodaran, G.R.Industries

HARDWARE TOOLS AND MACHINERY PROJECTS VT. LTD