Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.2 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹15.1 L+₹95,294.75 (6.72%)Rejected-AOC | 2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | V.RATHEESH L2 | A Sadik L1 |
|---|---|---|---|---|---|
| 1.00Partition work | |||||
| 1.00 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 603.73 | kg | 543.6 ₹3,28,186 | 504 ₹3,04,278.41 Lowest |
| 1.00 | 21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 7.71 | kg | 666.92 ₹5,139.95 | 619 ₹4,770.63 Lowest |
| 1.00 | OD108815/2024-2025:Providing and fixing WPC Louver sheet of superior quality, colour and finish as per design complete as per the architectural drawings and the directions of Engineer in charge . | 296.61 | sqm | 2,400 ₹7,11,873.6 | 2,269 ₹6,73,017.17 Lowest |
| 1.00 | OD354008/2025-2026:Providing and fixing 12 mm thick BWP Grade Marine Plywood with 1.0 mm thick decorative laminated sheet on one side (wooden/glossy with good finish) as per design and as per the direction of Engineer-In-Charge.
-Marine plywood conforming to IS : 710 (From DSR Item 9.126.1) | 92.28 | sqm | 2,259.99 ₹2,08,551.88 | 2,091 ₹1,92,957.48 Lowest |
| 1.00 | OD354186/2025-2026:Providing and fixing 16 mm thick BWP Grade Marine Plywood as per design and as per the direction of Engineer-In-Charge. -Marine plywood conforming to IS : 710 (From DSR Item 9.126.1) | 13.32 | sqm | 2,215.55 ₹29,511.13 | 2,049 ₹27,292.68 Lowest |
| 1.01 | 9.20.3:Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard ) including ISI marked nickel plated bright finished M.S. piano hinges IS : 3818 marked with necessary screws | 7.56 | sqm | 3,150.53 ₹23,818.01 | 2,914 ₹22,029.84 Lowest |
| 1.01 | OD353523/2025-2026:18 mm thick HDF board with both sides decorative lamination including all cost conveyance, labour charge etc complete as per the direction of departmental officers at site excluding cost of fittings | 2.92 | sqm | 2,723.47 ₹7,952.53 | 2,519 ₹7,355.48 Lowest |
| 1.01 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 2.08 | sqm | 1,278.82 ₹2,665.06 Lowest | 1,985 ₹4,136.74 |
| 1.01 | OD353524/2025-2026:Supplying and fixing stainless steel auto closer hinges for cupboard shutters with S.S screws, etc complete as directed by the site Engineer-in-charge. | 12 | each | 279.23 ₹3,350.76 | 250 ₹3,000 Lowest |
Tender Value
₹15.3 L
EMD Value
₹38,235
Closing Date
28 May 2026, 5:00 pmClosed
Executive Engineer
Executive Engineer, PWD Building Division, Alappuzha
GENERAL-District court -Renovation of Chamber ,Court hall and Installation of Partition with door behind dais of Hon. District judge ,Alappuzha -2024-25-General Civil Work(Re Tender
2026_PWD_847510_2
PWD/BLDG/TR/9952/2024_5_1_1/1
Open Tender
Civil Works - Buildings
Item Rate
240 days
Alappuzha
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
₹38,235
17 Jul 2026
19 May 2026
30 May 2026
19 May 2026
28 May 2026
19 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Partition work | |||||
| 1.001 | 21.1.1.1:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionAnodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 0.8 | kg | - | - |
| 1.002 | 21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) | 1 | kg | - | - |
| 1.003 | OD108815/2024-2025:Providing and fixing WPC Louver sheet of superior quality, colour and finish as per design complete as per the architectural drawings and the directions of Engineer in charge . | 0.6 | sqm | - | - |
| 1.004 | OD354008/2025-2026:Providing and fixing 12 mm thick BWP Grade Marine Plywood with 1.0 mm thick decorative laminated sheet on one side (wooden/glossy with good finish) as per design and as per the direction of Engineer-In-Charge.
-Marine plywood conforming to IS : 710 (From DSR Item 9.126.1) | - | sqm | - | - |
| 1.005 | OD354186/2025-2026:Providing and fixing 16 mm thick BWP Grade Marine Plywood as per design and as per the direction of Engineer-In-Charge. -Marine plywood conforming to IS : 710 (From DSR Item 9.126.1) | - | sqm | - | - |
| 1.006 | 9.20.3:Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard ) including ISI marked nickel plated bright finished M.S. piano hinges IS : 3818 marked with necessary screws | 1 | sqm | - | - |
| 1.007 | OD353523/2025-2026:18 mm thick HDF board with both sides decorative lamination including all cost conveyance, labour charge etc complete as per the direction of departmental officers at site excluding cost of fittings | - | sqm | - | - |
| 1.008 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | - | sqm | - | - |
| 1.009 | OD353524/2025-2026:Supplying and fixing stainless steel auto closer hinges for cupboard shutters with S.S screws, etc complete as directed by the site Engineer-in-charge. | - | each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1439209.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.05 MB
affi.pdf
Tender Documents • 0.02 MB
PRI.pdf
Tender Documents • 0.26 MB
epay1.pdf
Tender Documents • 0.06 MB
viewnit.pdf
Tender Documents • 0.03 MB
bis.pdf
Tender Documents • 0.56 MB
BOQ_1439209.xls
BOQ • 0.31 MB
viewsbd.pdf
Other Document • 1.63 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .