RRD on Sainj to Dhaugi road Km.0/0 to 6/250

Excavation soil in hilly area by mechanical means including cutting and trimming af side slopes and disposal of excarated earth with lift up to 1.5 m and a lead up to 20 m any as per drawing and technical specification clause 1603.1 all kind of soil with in all leads and lifts to the entire satisfaction as per direction of Engineer-in-Charge.

Excavation in earth work for structure in all heights and depths in all kinds of soil including ordinay rock,hard rock (Requiring blasting), hard rock(blasting prohibited), marshy soil and their intermediate classification. If water is met due to stream flow, seepage, rain and other causes it shall be removed by suitable diversion, pumping and bailing out and the excavation shall be kept dry whenever so required by the contractor at his own cost , including dressing of slopes and beds setting out conforming to required lines, grades , side slopes as shown in the drawing and as per direction of Engineer-in-charge and transportation of soil to road way after back filling and then disposing of surplus excavated earth in acquired width of road or on approved dumping sites including its stacking, leveling and dressing in all leads and lifts through all modes of transportation including head load animal load or mechanical means or other incidentals to complete the work as per technical specifications clause 305.1. All useful materials,such as stone shingles, agg. and slates shall be sorted out and stacked along road sides to the maximum possible extent in all leads and lifts. Any loss to the public and private property during the course of execution of disposal of serviceable and un-serviceable materials shall be absolute responsibility of the contractor which shall have to be duly compensated by him in all respects.

Providing concrete for plain reinforced concrete in open foundation complete as per drawing and technical specification clause 802,803,1202 and 1203 1:3:6 (one cement : three sand : six graded stone aggregate graded stone aggregate 40mm (forty miilimetre nominal size) including the cost of form work and curing complete and hauling/carriage of all labour, equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing weep holes in brick masonry /stone masonary/ plain reinforced concrete abutment,wing wall,return wall with 100 mm (one hundred milimetre) dia PVC pipe extending through the full width of the structure with slope of1( v):20( H) towards draining face complete as per drawing and technical specifications clause 614,709,1206.6 including hauling/ carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.

Providing and laying of boulder upron laid in wire crates with 4mm (four milimetre) dia G-I wire confirming to IS 280 amd IS 4826 in 100mmx100mm (one hundred milimetre x one hundred milimetre) mesh wooven diaganally including ten percent extra for laps and joints laid with stone boulder weighting not less than 25 kg (twenty five kilogramme) each as per drawing and technical specification clause 1301 including haulage/carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts to the entire satisfaction as per direction of Engineer-in-charge.