Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.4 Cr
EMD Value
₹2.4 L
Closing Date
26 Nov 2026, 6:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer W.R.I. Division Palanpur.
Providing, Lowering, Laying and Jointing 400 mm Dia. HDPE Pipeline for filing Pond Survey No. 493 (Old Survey No. 94) and Survey No. 667 (Old Survey No. 201a/Paiki 5) of Village Malgadh, Ta. Deesa, Dist. Banaskantha by New Scour Valve @ Ch.49990 Mt of Changa Dantiwada Pipeline Project.
362135
Notice No : 10 of 2026-27
Open
Civil Works - Lift Irrigation Schemes
Works
Banaskantha
12 documents required · 12 mandatory
₹3,600
Executive Engineer W.R.I. Division Palanpur
₹2.4 L
3 Nov 2026
3 Nov 2026
3 Nov 2026
26 Nov 2026
3 Nov 2026
120 days
Excavation in all sorts of soil (including wet and
slushy condition of soil) with yellow, sandy,
gravelly soil including soft murrum & H.M.
including sorting & stacking and depositing the
excavated stuff in uniform layers as and where
directed upto lead of 30 m and lift as shown
below including clearing the site etc. compute
(including dewatering). (a) 0 to 3 Mt. depth
Manufacture, Supply & Delivery of Electric
Resistance Welded (Up to 400 mm) /
Submerged Arc Welded (Above 400 mm) M.S.
Pipe having beveled ends plate or coil
confirming to IS-3589-2001 or its latest revision
/ ammendment for following thickness outside
2 diameter at GWSSB store or site anywhere in 40.00 Rmt 2805.00
Gujarat state including all taxes, insurance,
transportation, freight charges, octroi, inspection
charges, loading, unloading, conveyence to
departmental stores, stacking etc. all complete.
- Pipe Dia in O.D. in mm and Thickness in mm -
406.4 mm O.D. and 4 mm Thickness
Lowering, Laying, Jointing & Welding in position
to correct line & level M.S. Pipe with outer
gunniting & inside linning / Epoxy paiting on
pedestal or chairs upon prepared formation or
3 prepared bedding in trenches the rates include 40.00 Rmt 354.00
conveyance from store to site of work loading,
unloading, joint plastering, hydrotesting etc
complete. - 4 mm to 7 mm Thick - Pipe Dia in
Providing and supplying in Standard length ISI
mark high density Polyethylene H.D.P.E pipes
suitable for potable water as per IS specification
No. 4984/1995 including all local and central
4 taxes, transportation, freight charges, octroi, 5200.00 Rmt 3290.00
inspection charges, loading, unloading,
conveyence to the dept. stores etc. comp. - Test
Pressure : 6.0 Kg/cm2 - Pipe Dia in O.D. in mm
: 400 mm dia O.D.
Lowering, laying, jointing of HDPE pipes
including HDPE Pipe specials of following class
and diameter (By butt fusion welding method)
including cost of conveyence from stores to site
5 of works including cost of labour, material giving 5200.00 Rmt 516.00
satisfactory hydraulic testing including crop
compensation for the crops for the pipe laying
work etc complete. - Test Pressure : 6.0 Kg/cm2
- Pipe Dia in O.D. in mm : 400 mm dia O.D.
Refilling the pipeline trenches incl. ramming,
6 watering, consolidating desposal of surplus stuff 10000.00 Cum 22.00
as directed within a radius of 3 km.
Raising of air valve incl. providing and fixing of
80 mm dia Medium duty G.I. Pipe 3.50 mt long,
incl Providing and fixing Double acting cutting
7 (DS2) with buile in S.V. incl.providing and 18.00 Nos. 8858.00
welding of M.S. flange incl. C.C. block of 1:2:4
as per Drawing etc Complete. - Air valves doulbe
acting (DS2) - Diameter : 80 mm
Providing and Laying foundation concrete of
proportion as under by using cement, sand and
machine crushed course aggregate laid in situ
8 including necessary temping, smooth
finishing,watering and curing as directed with all
leads and lifts etc complete. (a) PCC 1:3:6
Providing and Laying CC 1:2:4 grade using
cement,sand and crushed metal including
providing and erecting necessary form work,
centering, vibrating, smooth finishing, watering
and curing as directed with all leads and lifts etc
complete. (a) subsructure
Providing and laying HYSD/T.M.T. Fe-415,500D
steel bar reinfoecement for R.C.C.works and
anchor bars with providing binding wires
including cutting, bending, welding, binding in
position, hooking, placing in position with all
leads & lifts etc. complete. [c] TMT Fe-500 D
Providing and Supplying ISI mark CI D/F sluice
valves as per IS:14846 (Latest Edition) of
following class and diameter including all taxes,
insurance, transportation, freight charges,
11 octroi, inspection charges, loading, unloading, 3.00 Nos. 47009.00
conveyence to departmental stores, stacking etc
complete. - PN 1.6 With Hand wheel/Cap
Operated (PD type Short body) - Diameter :
Lowering, laying & jointing in position following
C.I./ D/F Reflux valve, Butterfly valves, Sluice
valve and Air valves including cost of all labour,
jointing material, including nut bolts & giving
satisfactory hydraulic testing etc. Complete. -
Sluice valve - Dia. in mm : 400 mm Dia.
Drilling of Horizontal bore hole for water main
pipeline under the Railway/Road tracks in all
strata with required length including fixing of
M.S.(or as specified by Railway /Road authority)
casing pipe of suitable size and Thickness. Rate
includes the cost of Drilling of Bore hole, Casing
pipe & welding pushing etc Complete but
excluding the cost of water main, valves and
other items. Entire work should be as per
Approved Drawing and as per instruction of
Railway / Road authority for Following diameter
of bore hole. for M.S. Pipe - Horizontal Drilling :
600 mm Dia. & M.S. Casing Pipe : 500 mm Dia.,
Thickness : 8 mm
Providing and Supplying In Standard Length ISI
mark rigid unplasticised PVC Pipes Suitable For
Potable Water With Ring fit Joint Including Cost
of rings, as per IS Specification no 4985/1988
Including all Local and Central taxes,
14 Transportiton, Freight Charges, Octroi, 700.00 Rmt 420.00
Inspection Charges, Loading, Unloading,
Conveyance to the Departmental Stores and
Including Cost Of Jointing material etc.
Complete. - Test Pressure : 6.0 Kg/cm2 - Pipe
Dia in mm : 160 mm Dia.
Obtaining Permission and Paying all statutory
costs to the Competent Authority of National
Highways for obtaining Crossing permission
during laying of Pipeline. Only the
Correspondence with Concerned Department
Shall Be Facilitated by The Department. All
Fees, Applicable Service Tax, Security Deposit,
Supervision Charges, Miscellaneous Charges,
Expenditure etc., Charges for Occurrence of Any
Damages, N.O.C etc shall be paid by the
contractor and is included in this item for
individiual crossing.
Obtaining Permission and Paying all statutory
costs to the Competent Authority of State
Highways/MDR for obtaining Crossing
permission during laying of Pipeline. Only the
Correspondence with Concerned Department
Shall Be Facilitated by The Department. All
16 Fees, Applicable Service Tax, Security Deposit, 4.00 Job 44500.00
Supervision Charges, Insurance Charges for
Crossing Pipeline, Miscellaneous Charges,
Expenditure etc., Charges for Occurrence of Any
Damages, N.O.C etc shall be paid by the
contractor and is included in this item for
individiual crossing.
Obtaining Permission and Paying all statutory
costs to the Competent Authority of Crude Oil
Pipeline for obtaining Crossing permission
17 during laying of Pipeline. Only the
Correspondence with Concerned Department
Shall Be Facilitated by The Department. All
Fees, Applicable Service Tax, Security Deposit,
Supervision Charges, Insurance Charges for
Crossing Pipeline, Miscellaneous Charges,
Expenditure etc., Charges for Occurrence of Any
Damages, N.O.C etc shall be paid by the
contractor and is included in this item for
individiual crossing.
Total Rs.
In Words: (Rupees Two Crore Thirty Eight Lakhs Twenty Six Thousand
Twenty Five and Sixteen paisa only) (Without GST)
I/We am/are willing to carry out the work at… ...................... % above/below percent
be written in figures and words) of the estimated rate mentioned above. Amount of my
/our tender works out as under.
Estimated amount put to tender Estimated amount put to tender
Deduct………% below Add………% Above
In words In words
Deputy Executive Engineer
Executive Engineer
W.R.I. Sub Division
Mehsana WRI Division
(B) For Item Rate Tender (For above INR 50 Cr.):
Item Description of Item Quantity Unit Rate Amount
No (with brief specification
and reference to book of In In
specifications) figures Words
(A) Total Tendered Amount
(B) Rebate on above tendered amount (if any) % (in figure)
words)………………………………………………….………………………………………………...
(C)Net Tendered Amount (A-B) (in figure) ………………………………
(in words)………………………………………………….………………………………………………...
1 The Contractor shall exhibit a board with brief details of work as directed by the
Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per
Govt. G.R. NO.: MIS102010/17/K1 Dated:30/07/2018 as stated in S.O.R. therefore in
R.C.C. items where there is a change as per actual mix design the cost of difference of
cement consumption have been deducted from the rate of original item at the rate of input
rate mentioned in all the tender.
Deputy Executive Engineer
Executive Engineer
W.R.I. Sub Division
Mehsana WRI Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1.SBD.pdf
2. Schedule B.pdf
3. Nivida.pdf
4. NIT.pdf
5. Chamber Kundi Drawing Malgadh SN 493 and 667 aa 19 05 2026.pdf
6. outlet structure meas Malgadh SN 493 and 667 aa 19 05 2026.pdf
7 outlet structure steel detail Malgadh SN 493 and 667.pdf
8. Air valve Drawing Malgadh SN 493 and 667 aa 19 05 2026.pdf
9. pushing drawing Malgadh SN 493 and 667 aa 19 05 2026-1.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .