Loading…
Loading…
Tender Value
₹20.7 Cr
EMD Value
₹20.7 L
Closing Date
29 Jun 2026, 6:00 pm
Secretary, Sports Authority of Gujarat, Gandhinagar,
Renovation of Central Library at Gandhinagar (Phase-II)
312176
6 of 2026-27
Open
Civil Works
Gandhinagar
3 documents required · 3 mandatory
₹21,240
Secretary, Sports Authority of Gujarat, Gandhinagar payable at Gandhinagar
₹20.7 L
6 Jun 2026
6 Jun 2026
6 Jun 2026
29 Jun 2026
6 Jun 2026
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Demolition including stacking of serviceable materilas and disposal of
1 unserviceable materials with all lead and lift. (i) R.C.C. work Cmt 12.00 1,110.75
Demolition of Brick work and stone masonry including stacking of serviceable
2 materilas and disposal of unserviceable materials with all lead and lift.(ii) In Cmt 121.00 577.92
Cement Mortar.
Dismentaling tiled or stone floors laid in mortar including stacking of serviceable
3 materilas and disposal of unserviceable materials with Smt 5707.00 50.11
all lead and lift.
Dismentaling of wooden floors/partition including stacking of serviceable
4 materilas and disposal of unserviceable materials with all lead and lift. Smt 318.00 75.16
Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc.
stacking of serviceable materilas and disposal of unserviceable materials with all
lead and lift.(i) G.I.sheet roofing.
Dismentling wood work, wrought framed and fixed in frames trusses including
6 stacking the materials with all lead and lift. Cmt 26.00 1,847.34
Dismentling doors, windows, ventilators etc. (wood or steel) shutters including
chowkhats architraves, holdfasts and other attachment etc. complete and
stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.
Dismentling doors, windows, ventilators etc. (wood or steel) shutters including
chowkhats architraves, holdfasts and other attachment etc. complete and
stacking them within all lead and lift.(ii) exceeding 3 Sq.M. in area.
Dismentling aluminum doors, partition shutters including framw and glass
9 architraves, holdfasts and other attachment etc. complete and stacking them Smt 561.00 75.75
within all lead and lift.
Dismentling steel work including distempering and stacking the materials with all
10 lead and lift. Kg 4128.00 3.85
Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and
11 clamps including stacking the materials with all lead and lift ( for any dia, of pipe) Rmt 600.00 78.51
Dismantling santtary fittings like wash basin . W.C. pan Indian and European
12 type, flushing tank etc. including stacking the materials with all lead and lift. Each 64.00 425.93
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Removing and scraping of old deteriorated plaster/paint of any thickness from
wall / R.C.C member including stacking of serviceable material and disposal of
unserviceable from site of work with all lead and lift
Treatment for distressed/damaged RC members by Polymer modified mortar
14 (PMM). (For all RC members) as per specificaiton inclding all Smt 165.00 2,514.90
Cutting out cracks of roof terrace/ Walls to V- section , cleaning out, wetting
15 grouting with cement and sand slurry 1:3 (1- cement 3-sand ) Rmt 1200.00 68.49
16 Supply & apply of steel bar for replacment of old steel bar. Kg 540.00 90.90
Providing & fixing of reinforcement bars ( reiforcement bars shall be paid extra
under relevant item of work ) after drilling the hole of required diameter & depth
,cleanning of the same ,providing /filling the hole with Injection Mortar inserting
reinforcement bar etc. complete as per Manufacturers & architects
instruction.The work shall be carried out by the technical workmens/agency
17 approved by the manufacturer and under technical supervision of Manufacturer Nos 624.00 202.00
of Injection grout including all materials,tool tackles ,labour etc.complete all As
per drawings and design supplied by architect and instruction given by authority
and E.I.C. (10-12 mm Rebar)
Excavation for foundation for depth from up to 1.5 M. m including sorting
out and stacking of useful materials and disposing off the excavated stuff
18 up to 50 Meter lead.(B) Dense & Hard Soil, etc. complete as per detailed & Cmt 168.00 157.16
directed by EIC.
Excavation for foundation for depth from 1.5 m to 3.0 m including sorting
out and stacking of useful materials and disposing off the excavated stuff
19 up to 50 Meter lead.(C) Hard Murrum, etc. complete as per detailed & Cmt 160.00 287.21
directed by EIC.
Filling available excavated earth (excluding rock) in trenches. plinth,
sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating
20 each disposited layer by ramming and watering. Cmt 230.00 136.92
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Carring out plinth treatment to post construction / existing structure by spraying
chemical solution for termite control treatment including labour and material
consistent with I.S.I specification. Using Chlordane and Chiorpurfiles 20 EC. As
Per 6131_paret-II Concentration Weight one percent is recommended i.e one
21 liter 20 EC chemical emulsion with 19 liter give 1 % concentration inclusive of Smt 5000.00 111.25
one liter chemical emulsion application at the rate of 5 Liter chemical/ Sqm of
surface is recommended as per I.S.
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4-
22 graded stone aggregates 20 mm nominal size) and curing complete excluding Cmt 14.00 3,758.19
cost of formwork in (A) Foundation and Plinth
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
23 reinforcement for RCC work in Foundations footings, base of columns and Raft Cmt 38.00 4,775.28
etc., for any type of cross section area complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
24 reinforcement for RCC work in column up to plinth lvl. etc., for any type of cross Cmt 2.00 6,841.74
section area complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
25 reinforcement for RCC work in TIE, GROUND, & PLINTH BEAMS for any type of Cmt 7.00 6,743.77
cross sectional area. etc., complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
reinforcement for RCC work in (F) Wall (Vertical and horizontal fins)., & (F1) Wall
cap & coping up to G.F. level., etc. Complete, as per detailed & directed by
Architect / Consultant & and directed by EIC.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
27 centering & shuttering in true line and level etc, but excluding the cost of Cmt 4.00 7,895.88
reinforcement for RCC work in column at GF lvl. etc., for any type of cross section
area complete as directed by E. I. C.
Providing and laying controlled cement concrete M:200 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
28 reinforcement for RCC work in LINTLE-BEAM, LINTEL & SILL, COPING for all cross Cmt 9.00 6,984.15
sectional area at G.F. Lvl. etc., complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
29 reinforcement for RCC work in SLAB BEAMS for Ground floor & Super structure, & Cmt 27.00 6,984.15
for any type of cross sectional area. etc., complete as directed by E. I. C.
Providing and laying controlled cement concrete M:25 and curing complete
including cost of necessary, form work, compacting with vibrator curing
centering & shuttering in true line and level etc, but excluding the cost of
30 reinforcement for RCC work at Plinth to Ground FLOOR SLAB for all Cmt 35.00 6,811.24
thickness/cross section etc. complete as directed by E. I. C.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,
31 binding and placing in position complete upto floor two level Kg 15382.00 77.29
Brick work using common burnt clay building bricks having crushing strength not
less than 35 kg./Sq.Cm. at Ground floor Lvl. in cement Mortar 1:6 (1-Cement :6-
32 finesand) (B) Conventional For All Floors etc. Complete. Cmt 122.00 4,545.23
Half brick masonry in common brunt clay building bricks having crushing
strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -
33 coarse sand ) (B) Conventional half brick masonry at All Floors level.(B) Smt 346.00 692.19
Conventional
Providing 15mm thick cement plaster in single coat on Rough (Similar)side of
single or half brick walls for interior plastering at Any floor level and finished
34 even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Smt 5073.00 214.15
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing 10mm thick cement plaster in single coat on brick/concrete
35 walls/Ceiling for interior plastering at Any Floor Lvl. and finished even and Smt 1826.00 197.12
smooth in (ii) Cement mortar 1:4 (1- cement :4-sand)
20mm thick sand faced cement plaster on walls upto height 10 metres above
ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-
36 sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. Smt 91.00 315.69
P & L 24" x 48" ( or Specified as per area) vitrified 8 mm thick tile flooring over
mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new
surface or fixing on existing flooring by adhesive material including dismentaling
37 of existing flooring and jointed with color cement slurry including finised with Smt 2992.00 1,467.72
flush pointing & cleaning the surface etc. complete for antiskit.
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers
38 of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) Smt 1180.00 1,114.09
and jointed with white cement slurry
Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss]
polished/Rough(lapata finish) at all exposed Surface, Pre-moulded and pre-
polished, machine cut Granite of any colour and shade, & finish, as per detailed
by architect / Consultantfor flooring, dado skirting, cladding, steps and risers,
kitchen platforms, vanity counters, window sills , fascias and similar locations of
required size, approved shade, colour and texture laid over 20 mm thick mortar
1:4 (1 acid proof cement : 4 coarse sand). And In dado/skirting on In
39 dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand), Smt 1329.00 3,619.54
joints treated with white cement, mixed with matching pigment, epoxy touch
ups, including Spacer tape 6.4 mm thick x 4 TO 6 mm as per detailed groove,
rubbing, curing, moulding and polishing to edges to give high gloss finish as per
concept etc. complete at all levels.
Providing and fixing sandwich type platform including supplying and fixing
granite stone 18 mm thick mirror polished stones in top and side position and
vertical strip at front over 25 mm thick polished kota stone platform fixing in
top and sides and intermediates supports fixing with cement mortar and
adhesive and finishing including making recess for Kitchen/ Laboratory sink etc.
complete as approved and directed by Consultant / EIC.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing & Laying Green Polished Kota Stone of size 600 x 600 mm with mirror
polish and same color tone for flooring over 25mm (average) thick base of CM 1 :
6 (1 cement : 6 sand) Laid over & jointed with neat grey cement slurry including
filing the joint with white / colour cement, complete in true line & level / slope,
cleaning & rubbing, & for wall cladding, risers of steps, Dado & pillars laid on
41 10mm thick cement mortar 1:3 (1-cement :3-coarse sand) & jointed with grey Smt 1039.00 1,840.93
cement slurry etc. co\`mplete as per detailed by architect & directed by Engineer-
In-Charge.
Providing wood work in frames of Size 12.5 x 10 Cm. for doors, windows,
clerestory windows and other frames, wrought framed and fixed in position with
hold fast lugs or with dash fasteners of required dia & length Incl. Providing and
fixing 35 mm thick (or as specified) ISI marked flush door shutters conforming to
IS : 2202 (Part I) decorative type, core of block board construction with frame of
1st class hard wood, with 1mm. thk, ISI marked designed laminate in any finish
on both faces of shutters., slit openings with bidding Patti & 6mm thk designed
acid wash glass,. Stainless Steel butt hinges [125x65x2.5mm. IS1281712] with
necessary screws, using branded S.S. matt /glossy / platinum finished Smt 145.00 8,560.36
accessories, Colour / polishing all bidding parts, and also incl. with all Material,
labour, tools, tolerance, scaffolding etc. complete as per concept /direction and
approved by Architect, and directed by Engineer-In-Charge.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing & Fixing Walnut anodized Aluminum Hi-Profile sections (JINDAL-
DOMAL Series), hI-perfomance Sliding/ Openable window / Door with Required
thick toughened designer glass of Saint Gobain or equielent, is used for
Aluminum Hi-Profile Section with necessary accessories and with additional
shutter with Stainless Steel Mosquito net. [In Opening Position always one of
Mosquito net shouter should be in Close Position], captive bead, extremely
difficult to remove once glazed, high performance weather stripping, internal
wedge gasket, Bottom, side and top section including necessary filling up the
gaps at junctions, with required EPDM rubber/ etc. and ISI ebco make,"Lx.
Premium" Required Finish door fixture Accessories As per Architect Concept,
43 High security interlocking bead, Sheet membrane flashing , 2" over jamb flashing, Smt 28.00 8,547.93
New Blocking with new backer rod and sealant, channel glide with runner, slide
fold hinge when ever need of sufficient capacity, with warranty, all types of
material, labour, transportation, tools tolerance and matching required level with
Flooring etc. complete as per Architect concept and as per detailed by Architect
/ consultant & Directed by EIC.
Exterior cladding with cement bonded particle board confirming to IS:14276. with
the framing of same material of thickness 16 mm and exterior cladding of 12mm
44 thickness of required size as per Architect concept and as per detail by Architect Smt 408.00 4,999.10
/ consultant & Directed by EIC.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Water proofing-Providing and applying primer + 2 coats of Single component,
high solids, cold applied liquid polyurethane elastomer
waterproof membrane over uniform surface of slab. Apply
2 coats at dosage of 1.5 kgs per sq.m to achieve the
required minimum DFT of 1.5mm. It should have
following properties :-
1. Total Solids % 95 ± 5%
2. Specific Gravity 1.30 ±
3. Elongation % ≥ 700%
45 4. Dosage 1.2 - 1.5 kg/m2 in two coats Smt 260.00 931.52
5. Tack Free Time 24 - 48 hrs
6. Tensile Strength N/mm² ≥
7. Low Temperature Crack Bridging No crack
8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface
9. Shore Hardness 40 ±
10. Conformance Conforms to ASTM C
SS RAILING : Providing and fixing stainless steel (Grade 304) railing Horizontal
top pipe of 50mm dia., verticle Sq pipe 32X32 mm 900 mm c/c and 16 mm Dia.
3 Nos. Horizontal Pipe equval Spacing Hollow Pipes, channels, plates etc.,
including welding, grinding, buffing, polishing and making curvature (wherever
required) and fitting the same with necessary stainless steel nuts, Plates and
bolts complete, i/c fixing the railing with necessary accessories & stainless steel
dash fasteners, stainless steel bolts etc., of required size, on the top of the floor
46 or the side of waist slab with suitable arrangement as per approval of Engineer-in Rmt 323.00 3,784.98
charge, (for payment purpose only weight of stainless steel members shall be
considered including fixing accessories such as nuts, bolts, fasteners etc.). as per
Drawing and Approve by Engineer In Charge
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
SS RAILING (HAND RAIL) : Providing & Fixing Stainless steel 304 grade pipe railing
Horizontal 50 mm dia. 1 Nos. and Supprt pipe from wall 16mm Dia. at everymax
0.90mtr C/C including welding, grinding, buffing, polishing and making
curvature (wherever required) and fitting the same with necessary stainless steel
nuts, Plates and bolts complete, i/c fixing the railing with necessary accessories
47 & stainless steel dash fasteners, stainless steel bolts etc., fixed on Concrete or Rmt 81.00 1,421.68
brick work . Rate including of all materials.labour, fixing & polishing etc. comp.
as per Drawing and Approve by Engineer In Charge
Painting two coats (including priming coat) on new steel and other metal surface
with enamel paint, brushing, interior to give an even shade including cleaning the
48 surface an even shade including cleanicn the surface of all dirt, dust and other Smt 322.00 128.62
foreign matter.
Providing, supplying, fixing, fabricating, erecting, aligning the structural steel
like pivot ,tubular 'T', 'I" section, angle, plate, beam, channel section, Bar , hollow
box or Z purloins, Round or Square Pipes, of approved make, for built up
purloins, roof trusses, columns, side runners, tie beams, sag rods, base plates
gusset plates, cap plates, bearing bracing, gantry girders, rails, require support,
pipes, including all welded or bolted steel structures of various types with
approved I.S.I. mark electrodes, bolts, anchor bolts including cost of thread,
Anchor plate cleats etc. in RCC or masonry work, including cutting, bending,
welding ,fixing, supplying , Fabricating Decorative fevisted section or any
structured member required to complete the job for Bridge, Trusses, Canopy,
49 doors, Frame, Railing, Entrance gate, pergola, Decorative hanging light , New Kg 13358.00 131.83
window, parking shed or space frame or any other required specified area as
shown on drawing and detailed specification or as per design incl. three coats of
approved brand primer and two coats of paints, necessary scaffolding, tools
tolerance etc. complete as directed by Engineer In Charge. (payment will be made
for weight of metal used in the work)
Finishing wall with Weather proof exterior emulsion paint on wall surface (two
coats) to give an required shape even shade after thoroughly brushing the
50 surface to remove all dirt, and remains of loose powdered materials.etc complete. Smt 499.00 202.00
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of primer at
Wall painting (two coats) with plastic emulsion paint of approved brand &
manufacture on undecorated wall surfaces to give an even shade including
51 thoroughly brushing the surface free from mortar droppings & other foreign Smt 8653.00 250.48
matter & sand papered smooth, as per detailed & directed by EIC.
Applying two coats of Birla or Asian acrylic lappy ( putty) & two coats of primer at
Ceiling painting (Two coats) with plastic emulsion paint of approved brand and
manufacture on undecorated Ceiling surface to give an even shade including
52 thoroughly brushing the surface free from mortar droppings and other foreign Smt 6361.00 252.50
matter and sand papered smooth, as per detailed & directed by EIC.
Providing and fixing roof panel shall be made out of 0.5 mm thick pre coated GI
sheet . The Precoated sheet shall be of minimum 240 mpa steel grade confirming
to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per
IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and polyester
top coat 15-18 micron. The PPGI Sheet shall have plastic protective guard film of
53 minimum 25 microns to avoid scratches during transportation. The ridge shall be Smt 360.00 867.39
fixed to the steel members by pop rivet or self drilling/self stitching fastners @
maximum 450 mm c/c along length of capping/flashing etc complete .
Providing and fixing premoulded compressible filler board in black colour
confirming to MoRT&H Specifications (Clause 1015), having minimum density
95kg/cum. non-staining with less than 1% water absorption & compression
54 recovery of 93% minimum as per specification for 40 mm wide expansion joint Smt 27.00 1,330.92
including cutting to required size and shape at all levels etc.complete as directed.
Providing and fixing 30 cm Wide & 3mm thick Aluminium strip on existing
55 expansion joint horizontally & vertically with all material, hardware, acessories & Rmt 72.00 2,014.70
fittings etc completed.
Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block
60mm thick with grade of concrete M300 pnumatic compressed / vibrated
mechanically and as per approved design Confirming to IS 15658 :
56 including 35 mm Sand layer for levelling and filling the joint with sand in proper Smt 864.00 706.90
line and level as per guidlines of IRC : SP 63-2018 etc. Complete.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and fixing pre-cast concrete kerb stone of gray cement based concrete
block 30cm length, 30cm height and 15cm thick of M200 grade concret as per
57 approved design and including excavation for fixing in proper line and level, Rmt 72.00 397.53
filling the joint with C:M 1:3 (1 cement:3 fine sand) etc complete.
Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
58 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 340.00 280.23
and joints and fixing the same with adhesive solvent, including cost of all
materials.
Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
59 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 134.00 72.65
and joints and fixing the same with adhesive solvent, including cost of all
materials.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
60 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 160.00 91.84
and joints and fixing the same with adhesive solvent, including cost of all
materials.
Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
61 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 240.00 148.12
and joints and fixing the same with adhesive solvent, including cost of all
materials.
Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-
40) for cold water including fittings as approved by Engineer In Charge. Pipe shall
be fixed on the wall with the help of clamp at every two metre C/C or shall be
62 concealed as directed including necessary fittings etc. including testing of pipe Rmt. 320.00 195.67
and joints and fixing the same with adhesive solvent, including cost of all
materials.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing & Fixing to wall, ceiling & floor 40mm dia. CPVC threaded tubes of
class SDR 13.5 /schedule 80 confirming to IS 13592 of the following nominal
63 bore including G.I. fittings as required for completion of job, G.I. clamps Rmt. 96.00 447.72
including making good the wall, ceiling & floor etc. complete as per detail & the
instruction of EIC.
Providing & Fixing to wall, ceiling & floor 20mm dia. CPVC threaded tubes of
class SDR 13.5 /schedule 80 confirming to IS 13592 of the following nominal
64 bore including G.I. fittings as required for completion of job, G.I. clamps Rmt. 48.00 208.80
including making good the wall, ceiling & floor etc. complete as per detail & the
instruction of EIC.
Providing & Fixing gun metal check or no return full way wheel valve etc.
65 complete as per the instruction of EIC. (C) 25 mm. Dia Each 48.00 420.63
Providing & Fixing gun metal check or no return full way wheel valve etc.
66 complete as per the instruction of EIC. (E) 40 mm. Dia Each 16.00 663.43
Providing and fixing screw down bib taps of following size.(A) Brass screw down
67 bib tap polished bright. (i) 15mm dia. Each 64.00 214.81
68 Providing and fixing brass screw down stop tap.(B) 20mm dia. Each 32.00 223.81
Providing erecting and fixing double coated ISI water tank of required capacity
69 each with all necessary fittings and connection etc. complete on terrace Litter 24000.00 3.95
Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm diameter with
150 mm X 150mm S.S.jali for floor or nahni trap of the following nominal
70 diameter of self cleansing design with C.I screed down or hinged grating Each 64.00 599.64
including the cost of cutting & making good the walls, as per detailed, directed &
approved by the EIC.
Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and
water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard
71 weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. Each 16.00 1,292.19
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Constructing brick masonry chamber for underground C.I. Inspection chamber &
bends with bricks having crushing strength not less than 35Kg. Cm2 in C.M. 1:5
C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions, total
weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) & Wt.
of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse sand :4-
graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster
72 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat Each 16.00 2,932.93
cement on walls & bed concrete for (i) Inside dimensions 455mmx 610mm &
450mm deep for single pipe line. etc. complete as per detailed, directed &
approved by the consultant / EIC.
Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix ( 1 cement
: 2 coarse sand :4 grade stone aggregate 20mm size ) foundation concrete 1:3:6
mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size ) inside plaster 15mm
thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished with a floating coat of
neat cement & making channels in cement 1:2:4 mix ( 1 cement : 2 coarse sand
:4 stone aggregate 20mm nominal size ) finished smooth complete including
curing & testing… ( I ) inside 900mm x 1200 mm & 1.5 m deep including R.c.c.
73 cover with frame size 560 mm diameter ( A ) with 230mm thick walls of brick Each 8.00 19,349.63
masonry using brick having crushing strength not less then 35 kg/sqcm in CM
: 5 ( 1 cement : 5 coarse sand ), (2) B type depth 1.50 Meter for 150mm diameter
sewer.. etc. complete as per detailed, directed & approved by the consultant /
Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type B
pipe confirming to IS 13592-1992 with one end plain & other end socket with
rubbering & Fixing conforming to ISI 14735-1999 of approved make for drain
system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using PVC clamps of the size 160mm dia x 210mm length
x 196mm high at every 2000mm centre to centre or shall be concealed in wall as
74 directed necessary fittings such as bends, shoes, etc. incl. testing of pipe & joint Rmt. 15.00 876.90
& jointed with adhesive solvent, cement incl. cost of all material etc. complete as
per detailed, directed & approved by the consultant / EIC.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe
confirming to IS 13592-1992 with one end plain & other end socket with
rubbering & Fixing conforming to ISI 14735-1999 of approved make for drain
system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe
shall be fixed on wall using PVC clamps of the size 160mm dia x 210mm length
x 196mm high at every 2000mm centre to centre or shall be concealed in wall as
75 directed necessary fittings such as bends, shoes, etc. incl. testing of pipe & joint Rmt. 352.00 834.38
& jointed with adhesive solvent, cement incl. cost of all material etc. complete as
per detailed, directed & approved by the consultant / EIC. (A) 160mm dia. etc.
complete as per detailed, directed & approved by the consultant / EIC.
Providing laying (to level or slopes) and jointing reinforced concrete Light duty
non-pressure pipes I.S. class NP2 of the following internal diameter with collars
76 and butt ends prepared for collar joints including testing of joints complete.(D) Rmt. 80.00 678.02
Providing & Fixing white colour, Vitreous china, under / Over Counter wash basin
with single hole for pillar type with Cl or MS brackets painted white including
cutting holes, ranking bolts for Fixing & marking good the same, including Fixing
C.P. Brass waste coupling 32mm dia & Bottal trap & 15mm dia pillar tap, Bottle
Trap, as approved, capstan head C.P. screwed down high pressure with screw
shank & back nuts & rubber plugs, 15mm dia brass stop cock (50/75mm p.v.c.
77 Drain connection pipe, Water Connection Pipe of required Size, & testing the Each 36.00 2,706.90
same for leak proof, etc. with all material & labours to complete this job in all
respected manners, etc. complete as per detailed & approved by the consultant &
directed by EIC.
Providing and fixing wash down water closet (European type, W.C. Pan) with
integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1
(1 - Cement : 1 - Fine Sand) with plastic seat and cover for wash down water
closer with C.P. brass hinges, C.P. brass toilet paper holder, Jet Spray, Metropoloe
flush valve Incl. Connection and rubber buffers. (A) Vitreous China., etc. complete
as per detailed & approved by the consultant & directed by EIC.
Providing and fixing water closet squatting Pan including trap and foot rest
(Indian type W.C. Pan) size 580mm (Earthwork, bed concrete to be measured and
79 paid for separately) (A) Vitreous China.(I) Long pattern = White colour Each 8.00 1,432.99
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and fixing Urinal or approved quality including conecting the Urinal
80 with waste pipe , tap etc. complete.(A) White earthenware flat back or corner type Each 29.00 1,074.86
size 430mm x 260mm x 350mm.
Providing & Fixing C.P. brass towel rail Approved Make complete with C.P. Brass
brackets fixed to wooden plugs with C.P. Brass screws,, etc. complete as per
detailed, directed & approved by the consultant / EIC. (B) 600mm x 20 mm size,
81 etc. with all material & labours to complete this job in all respected manners, etc. Each 20.00 616.42
complete as per detailed & approved by the consultant & directed by EIC.
Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass
mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to wooden plugs
82 with C.P. brass screws & washers, etc. with all material & labours to complete this Each 20.00 859.41
job in all respected manners, etc. complete as per detailed & approved by the
consultant & directed by EIC.
Providing & Fixing handicap toilet set with Wall-mounted European Closet & wash
basin & all handicap requirement with dual flush tank, seat & lead (heavy duty)
including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted brackets, Waste
Coupling, 32mm size bottle trap etc. all Internal fittings complete with grab rails,
swin type grab bar etc. rubber buffers, C.P nuts, bolts etc making holes in walls &
floors, & finishing for ready to use. The rate includes all necessary connection
83 charges as per product detail to the satisfaction of Architect / engr. in-charge Each 3.00 48,520.40
where required & the final handing over etc. complete as per specifications,
drawings & as directed by the Engineer-in-charge. The scope includes Providing
and fixing all the necessary fittings of approved brand and as per directed by
Architect/EIC.
Providing & Fixing pillar tap, screw down high pressure with screws, shanks &
84 back nuts. (i) 15mm dia. Each 10.00 308.73
85 Providing & Fixing brass screw down stop tap. (A) 15mm dia. Each 15.00 205.83
Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets, painted
86 white including cutting holes in walls and making good the same but excluding Each 1.00 2,326.66
Providing and Fixing Pipe Hanger on Ceilling for Dutile type Ceilling Piping Work
87 as Per Directed By Engineer In Charge Each 50.00 813.22
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing
drain pipe etc. and repairing the hole after insertion of drain pipe etc. with
88 cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 Each 50.00 1,212.00
mm nominal size), including finishing complete so as to make it leak proof.
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular
type switch / bell push & accessories and earth continuity of following type,
erected on PVC / Metallic/Wooden box, single mounting base frame covered
89 with textured/metallic/white front plate modules erected on / in wall / ceiling as Pt. 800.00 485.81
per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as
directed. (f) with medium class Rigid PVC pipe and accessories erected concealed
in wall/ceiling complete Cat. III
Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both
are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up
to 10 mtr length, in below type of pipe erected with 6A Modular type switch and
hum free EME step type electronic fan regulator mounted and accessories with
earth continuity of following type erected on PVC / Metallic/Wooden box, single
90 mounting base frame covered with textured/metallic/white front plate modules Pt. 250.00 674.68
erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /
H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete Cat. III
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are
of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to
mtr length, in below type of pipe erected complete with Modular type switch &
pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front
plate modules erected on / in wall / ceiling as per pipe erected with following
91 type of accessories.[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire Pt. 600.00 510.05
from nearby switchboard/mcb db board.(f) with medium class Rigid PVC pipe and
accessories erected concealed in wall/ceiling complete Cat. III
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are
of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to
mtr length, in below type of pipe erected complete with Modular type switch &
pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front
plate modules erected on / in wall / ceiling as per pipe erected with following
92 type of accessories.[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Pt. 120.00 745.38
Wire from mcb db board.(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete Cat. III
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured /
93 metallic/white front plate , modules erected with necessary connections as per Ea 50.00 25.25
site situation directed by Engineer In charge. (7) Blank Plate Single Cat.III
Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin
socket erected on PVC / Metallic/Wooden box, single mounting base frame
94 covered with textured /metallic/white front plate modules erected on / in wall / Pt. 110.00 257.55
ceiling with following type accessories Cat. III
Supplying & erecting approved make LAN cable of following size in existing pipe
95 as per direction Mtr 3500.00 47.47
Supplying and erecting approved make online Un-interruptible Power Supply
system comprising flat cum-boost charger with IGBT base rectifier & Inverter &
sealed maintenance free SMF batteries. The charger having operating capacity for
input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load
power factor with battery, over/under voltage output with over load & short
96 circuit protection equipment. The system housed in CRC sheet duly powder Ea. 2.00 397,324.91
coated paint with following power backup.with MS painted batteries stand, 10%
Overload capacity for momentary load. (J) 25 KVA 3 - phase with 1Hr Backup
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with necessary PVC fittings &
97 Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, Mtr 2800.00 24.24
in approved manner as directed.(a)20 mm
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size
complete to be erected on/in wall or ceiling erected with necessary PVC fittings &
98 Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, Mtr 350.00 33.33
in approved manner as directed.(b) 25 mm
Supplying under floor pregalvanised corrosion proof rectangular sheet steel
cable trunking of 1.6 mm thick having with stand point load up to 1.33 Ton &
free from seepage of concrete of screed water with all accessories,Junction
Box,Joints as required and demanded by engineer-incharge and laying/erecting
as per OEM guidelines and as per instruction of engineer incharge having
99 following size of dimensions and No of compartments (W x D x T) Cat-III Mtr 150.00 1,342.29
[13] 300mm x 38mm x 1.6 mm with Three Compartments (FOR ELV,POWER IN
Providing and fixing approved make Perforated C type cable tray. Made from pre-
galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 .
with max 17.5% perforation with coupler plate / Fish plate and GI hardware like
nut - bolt and washers etc. erected on existing support as per Specification and
as per instruction of engineer in charge..(5) 300 X 50 X 1.5 mm Thick (FOR
ELV,ELE,HVAC,FIRE PLACED IN DUCT)
Providing & Erecting approved make following size of TV Co-axial flexible cable
comprising inner conductor of solid bare copper insulated with Foam PE &
101 Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable Mtr 100.00 39.39
coverage overall sheathed with black PVC insulation. (b) RG-6
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured /
102 metallic/white front plate , modules erected with necessary connections as per Ea. 151.00 160.59
site situation directed by Engineer In charge.(8) Computer RJ-45 socket Cat.III
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured /
103 metallic/white front plate , modules erected with necessary connections as per Ea. 151.00 210.08
site situation directed by Engineer In charge. (3) Two Pin/RJ-11 Telephone
Socket [B] For Two Gang Cat.III
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing & erecting Switch board for Computer or electric apparatus consisting
of following modular type accessories mounted with PVC / Metallic
concealed/open box with single mounting base frame covered with
textured/metallic /white front plate,modules erected with necessary connections
as directed. 1 no. 6A/16A universal plug-switch combined.3 nos. 6A Switch
nos. 6A 5 pin Plug .For Modular Type Accessories Cat.III
Providing following type of Modular Type Accessories mounted with PVC /
metallic/Wooden box, single mounting base frame covered with textured /
105 metallic/white front plate , modules erected with necessary connections as per Ea. 10.00 160.59
site situation directed by Engineer In charge. (4) TV Co-axial Socket outlet Cat.III
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die
cast powder coated and high U.V. & corrosion resistance with diffuser housed
in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt
LED driver efficiency > 85 % Ea. 15.00 312.09
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
wall mounted minimum 1 feet long
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast
powder coated and high U.V. & corrosion resistance with diffuser with company
mark/name 160V to 270V, Power Factor more than 0.95, THD < 15% CCT
107 Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % Ea. 10.00 295.93
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge may
integral driver (iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-lll
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die
cast powder coated and high U.V. & corrosion resistance with diffuser housed
in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting
required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
wattage capacity between the ranges shown.) (A) Square/ Circular shaped
Surface/Recessed Mount Downlight with provision for spring loaded mounting
clips complete.IP20 (iv) 22-24 watts, Surge-2 KVCat-lll
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die
cast powder coated and high U.V. & corrosion resistance with diffuser housed
in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting
required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
wattage capacity between the ranges shown.) (A) Square/ Circular shaped
Surface/Recessed Mount Downlight with provision for spring loaded mounting
clips complete.IP20 (ii) 11-15 watts, Surge-2 KV Cat-lll
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die
cast powder coated and high U.V. & corrosion resistance with diffuser housed
in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting
required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
wattage capacity between the ranges shown.) (A) Square/ Circular shaped
Surface/Recessed Mount Downlight with provision for spring loaded mounting
clips complete.IP20 (i) 5-9 watts,Surge-2 KV Cat-lll
Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to
Watt assembled on single MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die
cast powder coated and high U.V. & corrosion resistance with diffuser housed
in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting
required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
wattage capacity between the ranges shown.) (B) LED Panel Light with provision
for Plane front frame with translucent cover fixed to housing complete.IP20 (vi)
36 watts, 24" x 24", Surge- 2KV.CAT III
Supplying & erecting approved make low noise decorative exhaust fan having
112 square frame ABS body with inbuilt lowers & square frame. 250mm with 1350 Ea. 50.00 1,366.53
RPM Cat.II
Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with
double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep
113 complete having 3blades with aluminium blades with , canopy & 30 cm. down Ea. 250.00 1,948.29
rod erected with earthing.(Make shall be approved by Engineer in charge))
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC
bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /
114 Heavy Duty PVC box complete erected concealed in Ceiling with necessary Ea. 250.00 108.07
finishing.
Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box.
Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down
116 rod erected duly painted for fan complete with proper insulation without leakage Mtr. 248.00 108.07
and earthing.
Providing & erecting water cooler having storage capacity 150 Ltr. & cooling
capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the
water should drop by 15˚C within a hour, The water cooler should be comprising
of hermetically sealed compressor, fan motor, condensing unit, water tank
surrounded by evaporating, coil, thermostats, relay etc.complete with necessary
inlet & outlet connection. The body of water cooler will be made from Stainless
Supplying & erecting 5 stage single reverse osmosis water purification system
with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter
GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with
40 psi inline type post carbon filter auto low & high pressure switches with
following size of storage tank & LPH capacity & erected as directed [C] 50 Ltr /
Hr with 150 psi 2 nos booster pump
Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to
operate on 240 V A.C. system and having breaking capacity 10 KA to be erected
119 in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III Ea. 300.00 112.11
providing and erecting Approved make RCCBs conforming to IS: 12640 and
having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and
suitable for operation on single phase 240 V,50Hz. having characteristic of quick
120 action & tripping with all advance feature & do not incorporate any electronic Ea. 50.00 1,969.50
component. for following Max. rating erected as directed (i) 25 Amps.DP Cat. III
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)
121 having 10KA breaking capacity & confirms to IS :8828 in existing box having Ea. 20.00 737.30
following capacity (c)63 Amp Cat.III
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and erecting Sheet Steel powder coated MCB distribution board - flush
/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate
nos. of MCBs.(The DBs should be used of same company of MCB to be used)
suitable for (A) single phase incoming and horizontal single phase outgoing (a)
single door (IP-30) (i)4 way
Providing and erecting Sheet Steel powder coated MCB distribution board - flush
/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,
Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate
nos. of MCBs.(The DBs should be used of same company of MCB to be used)
suitable for (B) three phase incoming and single phase horizontal type outgoing
Per phase isolation type (PPI) (b) sheet steel double door (iii)8 way
Providing & erecting weather proof, dust & vermin proof, floor mounted front
operated indoor type cubical panel board necessary IP42 and above protection as
per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for
outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with
necessary accesories , supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal partitions & cable alley as per
requirements & instruction of engineer-in-charge with erection of supplied
switch gears, BUSBARS, suitable size of inter connecting PVC copper wire /
copperaluminium strips, rubber grommets, rib, bakelite control fuses/MCB for
measuring instruments, earth bus & earth bolts, foundation flange - boltsbase
Plates, sufficient nos. of hinged doors, handles with locking arrangement and
rubber gasket,heavy duty end terminal connection,danger notice board,necessary
124 ventilation,earthing strip complete. The Panel shall be painted with epoxy powder Sq Mtr 6.00 16,392.30
coating.(The rates excludes the cost of switchgears, bus bars, inter connecting
mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be
measured excluding base beams) The panel shall be supplied with following
approved manufacturers with followingsize.(C) The standard companies switch
gear shall be used and only manufacturers at CPRI approved factory as per IEC
61439 for beneficial use.(i) with 350mm depth
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and erecting Approved make Four pole moulded case circuit breaker
having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up
to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C.
125 supply 50 c/s. with all internal connections, spreader tinned copper & complete Ea. 20.00 6,173.12
erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III
Providing and erecting Approved make Four pole moulded case circuit breaker
having breaking capacity ICU of 35 KA. at 415 V. having normal current rating
125A. with Fixed thermal & magnetic release suitable to work on A.C.supply
126 c/s. with all internal connections, spreader tinned copper & complete erected in Ea. 10.00 8,055.76
existing 16 G.M.S. housing.ICS=100% of ICU only Cat III
Providing and erecting Approved make Four pole moulded case circuit breaker
having breaking capacity ICU of 35 KA. and above at 415 V . having normal
current rating 250A. with variable thermal & magnetic release suitable to work
127 on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & Ea. 2.00 20,946.39
complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III
Providing and erecting Approved make Four pole moulded case circuit breaker
having breaking capacity ICU of 50 KA and above at 415 V having Normal
current rating 400A. with variable Thermal & magnetic release suitable to work
128 on A.C.supply 50 c/s. With all internal connections, spreader tinned copper & Ea. 2.00 25,228.79
complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only
Providing and erecting Approved make Earth fault Relay suitable to mount with
inter connection suitable to following size of moulded case circuit breaker
129 having CT ratio & MCCB rating as following along with shunt trip 220V AC. with Ea. 1.00 5,415.62
all internal connections & complete erected in existing M.S.housing.. (3) 250 A -
400 A , CT Ratio 1/400
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting
Aluminium Busbars with four equal Nos. of bus having current density not more
than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with
colour insulating tape for phase sequence of following current carrying capacity,
130 erected with necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 16.00 660.54
busbar,erected in existing cubical panel with necessary connections. (A) Suitable
for 100 Amp. Capacity
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting
Aluminium Busbars with four equal Nos. of bus having current density not more
than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with
colour insulating tape for phase sequence of following current carrying capacity,
131 erected with necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 12.00 1,037.27
busbar,erected in existing cubical panel with necessary connections. (B) Suitable
for 200 Amp. Capacity
Supplying and erecting triple pole & neutral 440V/ 500V panel mounting
Aluminium Busbars with four equal Nos. of bus having current density not more
than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with
colour insulating tape for phase sequence of following current carrying capacity,
132 erected with necessary bus bar supports /insulators, main cable socket to each Rn.Mtr 6.00 2,204.83
busbar,erected in existing cubical panel with necessary connections. (D) Suitable
for 400 Amp. Capacity
Providing and erecting multifunctional meter suitable for application of Power
monitoring and showing measurement of following Voltage, Frequency,
Apparent energy, Apparent power, Active and reactive energy, Active and reactive
power, Average voltage Vavg, Peak demand power PM, QM, SM, Demand power P,
Q, S, Apparent power S, S1, S2, S3, Unbalance current, Power factor and
displacement PF (signed, four quadrant), Calculated neutral current, Active,
reactive, apparent energy (signed, four quadrant), Active power P, P1, P2, P3,
Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current Iag, Peak
demand currents, Reactive power Q, Q1, Q2, Q3, Demand current I1, I2, I3, [Us] Ea 8.00 14,123.84
rated supply voltage 40...300 V AC 45...65 Hz, 40...300 V DC, Network frequency
50 Hz, Type of network 3P, Display type 7 segments LED, Display colour Red,
Messages display capacity 3 fields of 4 characters, Display digits 12 digit(s) -
14.2 mm in height
Providing and erecting metallic vitrified danger notice board as per language
134 suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected Ea 10.00 69.69
as per IS-2551.
Pole 415V change over switch interior for panel mounting with operating
135 mechanism A.C.23 duty confirming to IS for . (F)400A Cat-lll Ea 1.00 22,255.35
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected concealed
in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated
stranded wire of green colour for earth continuity of following size.(A) with
medium class Rigid PVC pipe and accessories.(b) 2 wire 2.5 sq. mm (FOR
COMPUTER BOARD and SWITCH BOARD)
Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked
stranded Copper conductor wire in following type of pipe to be erected in / on
wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded
137 wire of green colour for earth continuity of following size(A) with medium class Mtr 2000.00 112.11
Rigid PVC pipe and accessories.(a) 2 wire 4 sq. mm (FOR 15/16A SS & AC)
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in
138 existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. mm ( 70 Mtr 200.00 540.35
Sq. mm 1/2 core) (Meter To Main Panel)
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in
139 existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq. mm ( 25 Mtr 1000.00 284.82
Sq.1/2 mm core)(For Floor Sub Panel and Pump Panel)
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
140 existing trench / pipe at road crossing or floor of following size of cables. (B) Mtr 500.00 987.78
4 core 16 Sq. mm
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in
141 existing trench / pipe of following size of cables (C) 4 core 10 Sq. mm Mtr 500.00 140.39
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated
with annealed copper conductor having XLPE Insulation, steel wire armouring &
142 FRLS outer sheath complete as requlred, Mtrs. 1500.00 119.43
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
143 existing trench / pipe at road crossing or floor of following size of cables. (C) Mtr 300.00 510.05
4 core 6 Sq. mm ( USED FOR LIFT)
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in
144 existing trench / pipe at road crossing or floor of following size of cables.(A) 4 Mtr 250.00 676.70
core 10 Sq. mm
Providing and, fixing heavy duty flange type brass cable gland with rubber ring
for PVC insulated armoured cable complete with out going tails, insulating tape
145 etc for following size of cables. (C) 2 to 4 core 10 Sq. mm Ea. 30.00 38.38
Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand
Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in
146 existing trench / pipe of following size of cables (E) 3 1/2 core 95 Sq. mm ( 50 Mtr 20.00 490.86
Sq. mm 1/2 core) (FOR HVAC PANEL)
Providing and, fixing heavy duty flange type brass double compression type
cable gland with rubber ring for PVC insulated armoured cable complete with out
147 going tails, insulating tape etc for following size of cables. (E) 3 & 1/2 core 120 Ea. 15.00 140.39
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
148 terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Ea. 10.00 15.15
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
149 terminals with brass/cadmium plated nut bolts in an approved manner. (D) Ea. 10.00 20.20
Solder less crimping type Aluminium lugs conforming to IS suitable for cable of
following size evenly crimped with high pressure tool & connected to switchgear
150 terminals with brass/cadmium plated nut bolts in an approved manner. (G) 120 Ea. 30.00 45.45
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi
stranded, annealed copper conductor with heat resistant PVC insulated conforms
to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for
control panel, relays, power switchgears, motor starters & control wiring) with
required size of copper lugs, nuts and bolts if required.(b) One wire 1.50 sq. mm
( FOR PANEL INTERNAL WIRING)
152 (c) One wire 2.50 sq. mm ( FOR PANEL INTERNAL WIRING) Mtr 30.00 27.27
153 (e) One wire 6.00 sq. mm ( FOR PANEL INTERNAL WIRING) Mtr 30.00 56.56
154 (f) One wire 10.00 sq. mm ( FOR PANEL INTERNAL WIRING) Mtr 30.00 91.91
Making trench in soft soil of suitable width of 90 cm deep for laying cable or
155 locating the fault all over the run and back filling the same and making the Mtr. 150.00 55.55
surface as normal ground.
Providing & laying approved make Double walled corrugated pipes (DWC) of
polyethylene(conforming to IS 14930 II )with necessary connecting accessories of
156 same material at required depth in existing trench for laying of cable. below Mtr. 800.00 62.62
ground / road surface for enclosing cable (A)50 mm outer dia.
Providing & laying approved make Double walled corrugated pipes (DWC) of
polyethylene(conforming to IS 14930 II )with necessary connecting accessories of
157 same material at required depth in existing trench for laying of cable. below Mtr. 100.00 95.95
ground / road surface for enclosing cable(C))90 mm outer dia
Providing & laying approved make Double walled corrugated pipes (DWC) of
polyethylene(conforming to IS 14930 II )with necessary connecting accessories of
158 same material at required depth in existing trench for laying of cable. below Mtr. 150.00 137.36
ground / road surface for enclosing cable (D)120 mm outer dia.
Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible
159 Submersible copper cable approved make of following Size. (D) 3 Core x 6 Sq. Mtr. 150.00 172.71
mm. (FOR WATER TANK)
Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible
160 Submersible copper cable approved make of following Size. (E) 3 Core x 10 Sq. Mtr. 300.00 295.93
mm. (FOR WATER TANK AND BORE)
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying & erecting earth pit of minimum bore dia.150mm size approved make
Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987
made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm
having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-
Micron galvanising, connection terminal dia of 12mm with constant ohmic value
surrounded by highly conductive compound with high charge dissipation suitable
for following type of applications with chamber and heavy duty cover.(approved
make OEM has to submit test certificate) & having back filling compound of (B)
Inner chemical (CCM Compound)- Resistivity:- 0.2 • / meter testing as per IEC
62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-
161 <2%(C) Back fill Compound :- Earthing compound should be capable to Ea. 15.00 5,760.03
retainmoisture for long time Necessary test report must be submitted.(c) For
Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,
A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent
(b)For Electrical installation up to 11 KV in normal soil. Length of Pipe : 2.00 mtrs
Back filling Compound :1 no. Bag of 25 Kg
Providing and erecting required size HOT deep Galvanised iron strip for earthing
162 of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. Kg 20.00 77.77
Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG.
Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5
164 ratio 15 VA burden erected in existing CRCA box duly secured with insulating Ea. 10.00 274.72
materials connected to the meter
Supplying and erecting approved make set of indicator lamps of LED type lamp,
165 lens cover, Bakelite holder complete erected with necessary connections. Ea. 10.00 43.43
Providing & erecting open well type horizontal mono block pump set with
stainless steel body having following specification (A) 0.5 H.P. single phase open
166 well motor pump set having discharge of 115 LPM @ 15 mtr. head suitable for 32 Ea. 1.00 7,934.56
mm dia. delivery pipe with control panel Cat. II FOR FOUNTAIN
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing & erecting open well horizontal mono block pump set with cast iron
body, complete for three phase submersible motor having[C] For 3 HP 3 phase
167 open well horizontal mono block pump set suitable for 85 LPM to 270 LPM @ 11 Ea. 2.00 15,707.52
mtr to 33 mtr head suitable for 50/65 mm dia delivery pipe Cat.II (WORKING
+ STANDBY)
S.I.T.C. submersible pump set for bore of 150 mm. dia. Or more having 3 phase
motor capacity about 20 H.P and discharge capacity having . Lifting and Lowering
168 taken extra.(A) (20 Stage) 370 to 350 LPM discharge at head in between 168 to Ea. 1.00 65,650.00
177 mtrs. suitable for 50 mm dia. delivery pipe Cat.III
Supplying & erecting approved make 3 phase motor control cubical panel ( Star -
Delta) made from16 G. CRCA sheet duly painted with epoxy powder painted
inside and outside with hinged doors and locking arrangement, consisting of
suitable size of ON- OFF isolator (AC - 3/23 duty) main fuses, single phasing
preventer cum water level. Guard (Complete unit), Toggle switch to by pass
Single phase preventer cum WLG, indicating lamps for R- Y- B phases, over load
relay, Automatic water level controller, Ammeter & Voltmeter each with two way
angle iron frame grouted on wall as directed. Star Delta & main contactor, Ea. 2.00 12,993.65
overload relay, thermal / Electronic Star delta cutoff timer, start - stop push
buttons. The isolator overload relay & contactors of L& T, Siemens or Cuttler
Hamer make only. Panel to be erected on angle iron frame ground on wall. (A)
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying & erecting approved make motor control cubical panel [Star delta]
made from 16G CRCA sheet duly epoxy powder painted inside and outside with
hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty)
main fuses. Digital volt and current meter (in a single unit) with micro controller
based control unit and current sensing single phasing preventer electronic
overload protection, over voltage (Programmable) protection and under voltage
(Programmable) protection, prod less dry run protection programming facility for
setting of all parameter like overload current, high voltage limit, low voltage limit,
170 dry run limit with digital indication on seven segment LED display for any fault Ea. 2.00 7,250.79
like over load, high voltage, low voltage, dry running single crimped, electronic
star delta timer, feather touch start / stop push buttons to be erected on angle
iron frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make
only) (A) DOL up to 5.0 H.P.
Supplying and erecting approved make3 phase motor control panel (ATS) made
from 16 G. CRCA sheet duly painted with epoxy power paint inside and outside
with hinged doors and locking arrangement, consisting, of suitable switch of AC
23 duty with HRC fuses (Cat.III), starting and running contactors, overload relay,
Automatic water level controller, Electronic timer with master timer CT operated
171 lamps, single phasing preventer , water level guard, over load, start, run and stop Ea. 1.00 31,965.49
push buttons, air cooled auto transformer with 60%, 70%, 80% tapping, Panel to
be erected on angle iron frame grouted on wall as directed., contactors relays,
timer etc. shall be of L & T Siemens / Cutler Hammer make. (A) Suitable for
Providing and erecting Two way Centre off Four pole MCB Change Over Switch (IS
172 13947-3 / IEC 60947-3) in existing box. (b) for 40 Amp Cat.III Ea. 2.00 1,344.31
Supplying & erecting approved make Automatic liquid level controller 6A.as per
instruction of Engineer in charge on site complete with wiring connection with
173 existing wires , with copper conductor from pump to upper and lower tank.(Size Ea 3.00 2,355.32
Not less than 1.5 Sq MM) from pump to upper and lower tank with ISI marked
Rigid PVC Pipe.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
SITC of 8 x 10/100/1000BASE-T PoE ports
2 x Gigabit SFP ports Advanced L2 switching and security features
174 L2+ Static Routing Optional “standard mode” or “surveillance mode” management Ea. 8.00 18,400.18
user interface 65W PoE budget [Approved by Competent Authority i.e. not Below
the rank of Executive Engineer ]
SITC of Patch Panel Cat 6 UTP Keystone Type- 24 Port-Fully Loaded [Approved by
175 Competent Authority i.e. not Below the rank of Executive Engineer ] Ea. 8.00 4,400.57
SITC of CAT6 UTP 24AWG PATCH CORD:2M,Plug 30U'
176 Snag less [Approved by Competent Authority i.e. not Below the rank of Executive Ea. 120.00 200.99
Engineer ]
Supplying and erecting approved make online Un-interruptible Power Supply
system comprising flat cum-boost charger with IGBT base rectifier & Inverter &
sealed maintenance free SMF batteries. The charger having operating capacity for
input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load
power factor with battery, over/under voltage output with over load & short
177 circuit protection equipment. The system housed in CRC sheet duly powder Ea. 4.00 50,197.00
coated paint with following power backup.with MS painted batteries stand, 10%
Overload capacity for momentary load.(A) 1 KVA with 1Hr Backup
SITC of 9U Network Rack for Network switch, Jack panel consisting of mains
178 panel, fan tray for ventilation, power distribution, cable channel etc as required. Ea. 8.00 14,645.00
SITC OF BULLET TYPE CAMERA - 4MP IPCP-UNC-TC41L5C-VMD-LQ CPPLUS MAKE
AS PER SPECIFICATIONS : 1/2.7" 4MP PS CMOS Image Sensor (0.9407
Centimeters) Max. 4MP (2688 × 1520)@1-25/30fps/ (2560 × 1440)@1-25/30
Instastream, H.265, H.264, H.264H, H.264B, MJPEG Support Triple stream WDR
179 (120dB), Day/Night(ICR), 3D NR, AWB, AGC, BLC, HLC, Digital Ea. 70.00 8,080.00
watermarking3.6mm fixed Lens Support Built-in Mic IR Range of 50 Mtr., IP67,
PoE complete with rj45 connector crimping, PVC back box
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supply, Installation, Testing & Commissioning of Indoor / Outdoor 5 MP IP
Bullet Camera of 1/2.8" Progressive CMOS Sensor with Night Vision and with
resolution 30 fps @ 2048x1536 & Manual Vari Focal f = 3- 9 mm Field of
View 40° ~ 80° (H), 30° ~ 60° (V) IR range upto 30/50 Mtr Smart IR Min.
Illumination 0.1 Lux @ F1.4 (Color), 0.01 Lux @ F1.4 (B/W) 3D Noise
Reduction ; Compression Technology H.265, H.264, MJPEG with
180 simultaneous streams ; S/N Ratio 51.5 dB Dynamic Range 110 dB Ea. 5.00 26,097.39
WDR; two way Audio ; on board SD/SDHC/SDXC card slot ; P-iris
Lens & Digital Image Stabilization ; ONVIF IP66, IK10, CE, FCC Class A,
UL listed with all required accessories.
Supply, Installation, Testing and Commissioning of 8TB Surveillance HDD
181 recording storage Ea. 2.00 29,452.61
Supply, Installation, Testing and Commissioning of 55'' Full HD Resolution
182 Output Display with 2 Port HDMI-VGA-Wall Mount Stand And Accessories Ea. 1.00 84,935.95
Supply, Installation, Testing and Commissioning of Network Video Recorder
with maximum 64 IP Cameras, up-to 6 HDD slots, simultaneous
183 1/4/9/16 channels playback and H.265+ / H.265 / H.264 recording supported. Ea. 4.00 173,049.36
(FOR CONNECTING ALL THE IP CAMERA)
Supplying & erecting Amplifier having following specification:
Power Output :250W (RMS) (300W Max.)
inputs : 6 Misc. & 2 Aux.
frequency Response :50-1500HZ I3db
Tone Controls :Cut & Boost type
184 LED Meter :5 LED Arrays Ea. 4.00 11,298.87
The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic
changeover from AC to Battery operation, duly protected by wrong Battery
Polarity connections. [[Approved by Competent Authority i.e. not Below the rank
of Executive Engineer ]
Supplying and erecting Weather & Dust resistant sound column with Aluminium
case & Aluminium mesh grille with foam layer under grill, rotary- switch for
following specifications . [[Approved by Competent Authority i.e. not Below the
185 rank of Executive Engineer ] (a) With 4 speakers, capacity of power handling 45W Ea. 25.00 2,055.35
(MAX) & 30 W RMS, each speaker have impedance of respectively 300 ohms /
W, 500ohms/20W,I -K.ohms/10 W, 2K. ohms / 5W.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying and erecting Weather & Dust resistant sound column with Aluminium
case & Aluminium mesh grille with foam layer under grill, rotary- switch for
following specifications . [[Approved by Competent Authority i.e. not Below the
186 rank of Executive Engineer ] (b) With 2 speakers having power handling capacity Ea. 5.00 1,370.57
of 23W(MAX) & 15 W (RMS), each speaker have impedance of respectively
ohms/ 15W, 1 K.ohms/ 10W, 2K.ohms / 5W & 4 K. ohms / 2.5W.
Supplying, Installing & testing approved make highly sensitive microphone
capable to pick up weak sound from longer distance & wider area suitable for
stage shows, group singing with frequency response 50 - 16000 Hz. Having
sensitivity of 1.6MV / Pa & impedance 250 ohms (Lo -Z), Supplied with
quick detachable holder & 10 mtr. twin core cable & 3 pin XLR connector.
[[Approved by Competent Authority i.e. not Below the rank of Executive Engineer
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
GEARLESS MACHINE, S.S. AUTO DOOR, S.S. CABIN
SPEED -1.00 Meter Per Second
LOAD -1020Kgs. ( 15 PASSENGER LIFT )
TRAVEL- G+3rd Floor (Travelling Height 15 Meter Approx )
CONTROL- Micro Process VVVF Collective Control System
STOPS & OPENING- 4 Stops & 4 Opening ( All Opening & Stopping Single Side)
OPERATION -Simplex operation, with/without Attendant
CAR ENTERANCE- Protected by S.S. AUTO DOOR (CENTRE OPENING)
HOISTWAY ENTERANCE- Protected by S.S. AUTO DOOR (CENTRE OPENING)
SIGNALS- UP- DOWN signals at each level, Emergency Stop & Bell, Fan Switch -
CAR ENCLOSER
M.S. STRUCTURE WORK:- I BIM MADE BY M.S. SQAURE PIPE 150MM * 150MM
BACK SIDE AND 5 FOOT PER M.S. 150MM SQAURE PIPE FRONT SIDE 150*150
SQAURE PIPE USE WITH REGULAR ACP CALLADING WORK WITH M.S. FARME WORK
AND REGULAR ACP SHEET
S.S. AUTO DOOR WITH FORCIELING
HOISTWAY SIZE
2000MM WIDTH X 2600MM DEPTH
188 CAR INSIDE SIZE Ea. 1.00 1,896,780.00
1250MM WIDTH X 1600MM DEPTH ( 15 PASSENGER ) ATTACH COPY
( AS PER GUJARAT ACT GOV. NORMS CABIN SIZE )
CLEAR OPENING
800MM OPENING X 2000MM HEIGHT X 1600 PIT
MACHINE POSITION
GEARLESS Machine Directly above in the HOISTWAY
POWER SUPPLY
415 VOLTS, 3 PHASE, 50 CYCLES 5%
LIGHTING SUPPLY
230 VOLTS, 1 PHASE, 50 CYCLES 5%
DOOR OPERATION
AND EXTRA FEATURES
AUTO DOOR SYSTEM / ARD SYSTEM
WALL MOUNT LOP COP / FIREMAN SWITCH
ANNOUNCING SYSTEM / OVER LOAD SYSTEM
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supply, Installation, Loading/Unloading of Variable Refrigerant Flow System
Top Discharge Out-door units :- VRV outdoor units with following multiple
inverter based scroll type compressors electronic expansion valve R410A eco
friendly green refrigerant cooling & heating mode both option ,special pre coated
fin type heat exchanger, low noise direct driven propeller condenser fans in each
module with top discharge including internal wiring ,microprocessor ,controls
,safety . the condensing unit should be capable of providing cooling between
189 +5°C to 52°C. COP should not be less than 2.7 @ 40⁰C Ambient temperature @ Set 4.00 841,734.00
100%. Also machine should be BMS compatible.
ODU capacity to be offered considering the Deration @40⁰C Ambient
temperature. A)44 HP
B) 60 HP " --------------------Do-----------------------" as per above
190 specification for complete work . Set 2.00 1,183,215.00
C) 66 HP " --------------------Do-----------------------" as per above
191 specification for complete work . Set 2.00 1,119,686.00
VRF/VRV Indoor Ac Units:- Factory Manufactured High / Medium static (Static
pressure as per ducting Layout requirements) VRF ductable Type Ceiling
suspended design Multiple Speed Indoor units additionally insulated with 10 mm
nitrile at site below drain pan and complete with Filter/Coil/Fan/ inculding Fire
rated Flex Canvass withZip / Unit Suspension fixtures and balance as per
specifications; cost shall include Air filters for HS Ductable models Hi Static
Ductable 6.4 TR
VRF/VRV Indoor Ac Units:- Factory Manufactured High / Medium static (Static
pressure as per ducting Layout requirements) VRF ductable Type Ceiling
suspended design Multiple Speed Indoor units additionally insulated with 10 mm
nitrile at site below drain pan and complete with Filter/Coil/Fan/ inculding Fire
rated Flex Canvass withZip / Unit Suspension fixtures and balance as per
specifications; cost shall include Air filters for HS Ductable models Hi Static
Ductable 3.5 Tr
VRF/VRV Indoor AC Unit : Supply installation testing and commissioning of
INDOOR unit comprising of copper evaporator, electronic expansion valve,
blower, motor, filter pad, auto air swing louvers, temperature & ON/OFF display
194 with inbuilt drain pump, including internal wiring, controls, Panal etc. (Single Nos 0.00 38,329.50
phase/Three phase) 1 Way Cassette 1 TR
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
VRF/VRV Indoor AC Unit : Supply installation testing and commissioning of
INDOOR unit comprising of copper evaporator, electronic expansion valve,
blower, motor, filter pad, auto air swing louvers, temperature & ON/OFF display
195 with inbuilt drain pump, including internal wiring, controls, Panal etc. (Single Nos 1.00 47,040.75
phase/Three phase) 1 Way Cassette 1.5 TR
VRF/VRV Indoor AC Unit : Supply installation testing and commissioning of
INDOOR unit comprising of copper evaporator, electronic expansion valve,
blower, motor, filter pad, auto air swing louvers, temperature & ON/OFF display
196 with inbuilt drain pump, including internal wiring, controls, Panal etc. (Single Nos 2.00 45,879.25
phase/Three phase) 1 Way Cassette 2 TR
VRF/VRV Indoor AC Unit : Supply installation testing and commissioning of
INDOOR unit comprising of copper evaporator, electronic expansion valve,
blower, motor, filter pad, auto air swing louvers, temperature & ON/OFF display
197 with inbuilt drain pump, including internal wiring, controls, Panal etc. (Single Nos 1.00 45,879.25
phase/Three phase) 4 Way Cassette 1.5 TR (Compact)
1.5 TR " --------------------Do-----------------------" as per above
198 specification for complete work . Nos 2.00 42,975.50
2 TR " --------------------Do-----------------------" as per above
199 specification for complete work . Nos 5.00 43,556.25
2.5 TR " --------------------Do-----------------------" as per above
200 specification for complete work . Nos 3.00 44,427.38
3 TR " --------------------Do-----------------------" as per above
201 specification for complete work . Nos 16.00 49,944.50
3.5 TR " --------------------Do-----------------------" as per above
202 specification for complete work . Nos 12.00 52,848.25
4 TR " --------------------Do-----------------------" as per above
203 specification for complete work . Nos 6.00 54,009.75
4.5 TR " --------------------Do-----------------------" as per above
204 specification for complete work . Nos 31.00 56,332.75
205 Special Purpose Ref Joints (Supplied from OEM) Nos 89.00 4,646.00
Cordless controller for VRF IDU with display/speed/setpoint/schedule
206 control including battery filled remote for each VRF IDU including wall mounted Nos 76.00 2,090.70
Remote stand of matching color
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Corded controller for VRF IDU with display/speed/setpoint/
207 schedule control including battery filled remote for each VRF IDU including wall Nos 13.00 4,471.78
mounted Remote stand of matching color
VRF System Central Controller complete installation hardware providing display
of Return Air Temperatures of each VRF treated
208 area / OnOff Trip Status / Command to Turn On/Off individual system as Set 1.00 104,535.00
specified (CRC)
SITC of Hard Copper refrigerant piping of required sizes for pair of gas (suction)
& liquid), with 19 mm Closed Cell Nitrile Class O Insulation material.Piping inside
209 building should be taken in Sprinkler type U-Clamps with EPDM Rubber RMT 450.00 3,484.50
Coverings. PVC Covers to be placed at each Clamp location & all crossings. 44 HP
60 HP " --------------------Do-----------------------" as per above
210 specification for complete work . RMT 400.00 3,636.00
66 HP " --------------------Do-----------------------" as per above
211 specification for complete work . RMT 200.00 3,737.00
CABLE TRAYS
GI perforated cable trays for laying power & control cables between HVAC Shaft
& (ODU LOCATION) equipment; including hardware, accessories like bends, tee’s,
supports, etc.
212 All Supports should be installed in overhead cable trays to keep movement space RMT 120.00 1,509.95
clear. Tray rates should be inclusive of the same. GI Cable Tray With Cover for
Exposed Ref. Piping (200mm*150mm*1.6mm)
CONTROL CABLING : Supply,installation,testing and commissioning of control
cum transmission wiring of 2 core x 1.5 sqmm copper sealded cable in suitable
213 PVC conduits between indoor and out door unit & outdoor units to central RMT 2500.00 255.53
remotes controllers.
Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber
214 insulation. 32mm dia RMT 100.00 238.11
Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber
215 insulation. 25mm dia RMT 500.00 214.88
Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber
216 insulation. 19mm dia RMT 400.00 197.46
Supply & Installation of Modular Support system for ODU Placement at Terrace
217 level Nos 20.00 12,195.75
Testing & Commissioning charges along with topping-up of refrigerant as per
218 specifications. Lot 1.00 605,495.00
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supply, delivery, Installation & testing of Factory /Site Fabricated (TDF/TDC)
GSM Galvanised Sheet (GI) Ducting class VIII with Flange, turning vanes, with
proper duct sealing with RTV food grade Sealant, rivets , GI nut bolts complete
219 with supports ,Pressure tested with aqueous base smoke generator etc all as per Sqm 200.00 1,916.48
specification. UPTO 750mm ( 0.63mm/24 gauge )
751mm -1500mm ( 0.8mm/22 gauge ) " --------------------Do-------
220 ----------------" as per above specification for complete work . Sqm 25.00 2,264.93
Powder coated Extruded Aluminium linear air Grilles with volume control
221 dampers Sqm 20.00 10,685.80
Powder coated Extruded Aluminium air Diffuser with volume control dampers for
222 supply air Sqm 2.00 3,252.20
Thermal Insulation Of Ducts with Class ‘O’ Plus(FM approved & in accordance to
UL 94(HBF, HF 1 & HF 2), 1996) Closed Cell elastomeric / XLPE Rubber with
223 antimicrobial & anti fungal properties as per specifications. 19mm with Factory Sqm 250.00 959.50
Laminated Allu. Foil
Acoustic Insulation with Open Cell Elastomeric Rubber Material with Antifungal
224 and Antimicrobial Properties from the inside of duct as Per Specifications. 15mm Sqm 50.00 1,616.00
Thick (For Duct)
Acoustic Insulation with Open Cell Elastomeric Rubber Material with Antifungal
225 and Antimicrobial Properties from the inside of duct as Per Specifications. 20mm Sqm 30.00 1,969.50
Thick (For Trapdoor)
226 Fire retardent Canvass Connection Each 11.00 4,065.25
Supply, installation, testing and commissioning of split type wall mounted air
conditioning unit of following capacity including indoor ,outdoor unit fitted with
inverter based rotary compressor , copper condenser and first charge refrigerant
R410A or equivalent . the condensing unit working range should be capable for
227 providing cooling between +/- 5deg c to 50 deg.c. including cordless remote Nos 1.00 54,300.13
control , auto air swing louvers. outdoor /indoor units should be same make
(brand) (Min. 3 star rating) 2.0 Tr
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supply & Installation of Haevy guage NON-VRF Copper piping
Seamless heavy gauge Copper piping of sizes as per OEM Recommendation duly
insulated with 9/13 mm thk. Nitrile Rubber Insulation(As per Specified with
KValue of 0.027-0.029 KCal/Hr.M Deg Cat0-16DegC). All necessary supports,
228 fittings where ever required will be included. Note:-Mentioned RMT is considered Rmt 10.00 1,248.61
for single line(For both Liquid+Suction). Vendor need to consider the qty as per
drawing accordingly Upto 2 TR DX Units
229 Cable Tray With GI Cover for Exposed piping (100*100*1.6mm) Rmt 5.00 871.13
Supply,installation,testing and commissioning of control cum transmission wiring
230 of 4 core x 1.5 sqmm copper cable in suitable PVC conduits between indoor and Rmt 12.00 156.80
out door unit
Supply & Installation of Modular Support system for ODU Placement at Ground
231 level. Set 1.00 6,678.63
PVC Drain piping for the units with 9mm thick nitrile rubber insulation with GC
232 and duly epoxy coated Black painted clamped as per specifications Rmt 8.00 156.80
Supplying, Installation, Testing and commissioning of Electric driven Main Fire
Hydrant pump suitable for automatic operation and consisting of following:
Horizontal type, centrifugal End Suction pump of cast iron body & bronze
impeller , mechanical seal to ensure a minimum pressure of 3.5 kg / sq.cm. at
highest and farthest outlet at specified flow of 137m3/Hour@ 70M. head with
233 M.S.fabricated common base plate, coupling, coupling guard, foundation bolts Nos 1.00 252,399.00
etc. as required (Hydrant + Sprinkler System) for motor and details pump
specificaion follow as per specification as mentioned in tender volume.
Supplying, Installation, Testing and commissioning of Diesel engine driven fire
pump suitable for automatic operation and consisting of following: Horizontal
type, centrifugal End Suction pump of cast iron body & bronze impeller
mechanical seal to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and
farthest outlet at specified flow of 137m3/Hour@ 70M. head conforming to IS
234 1520. with M.S.fabricated common base plate, coupling, coupling guard, No. 1.00 555,002.32
foundation bolts etc. for DG/motor and details pump specificaion follow as per
specification as mentioned in tender volume..
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying, Installation, Testing and commissioning of Jockey Pump 10.8M3/hour
@70M Head.Horizontal Centrifugal End Suction. with M.S.fabricated common
235 base plate, coupling, coupling guard, foundation bolts etc. for motor and details No. 1.00 119,041.95
pump specificaion follow as per specification as mentioned in tender volume..
Supplying, Installation, Testing and commissioning of sleeve with flange in Fire
water storage tank including gasket, required length of pipe as per the thickness
of tank wall, pipe length should be langer than tank wall minimum 250mm inside
236 and outside. Pipe make should be as per approved make list & as per No. 4.00 2,115.34
specification. Dia 200mm (Pump Main Suction)
Supplying, Installation, Testing and commissioning of sleeve with flange in Fire
water storage tank including gasket, required length of pipe as per the thickness
237 of tank wall, pipe length should be langer than tank wall minimum 250mm inside No. 2.00 1,177.86
and outside. Pipe make should be as per approved make list & as per
specification. Dia 80mm (Tank Drain)
Supplying, Installation, Testing and commissioning of cubical type floor
mounted power cum Fire Pump control panel complete with suitable switch gear,
bus bars, relays, contractors, indicating lamps, fuses, instruments manual
isolator & auxillary switch including connections complete as
required.(Contractor should submit GA Drawing for approval before deliver the
Panel at Site) as per specification.
Providing, fixing, testing & commissioning of Glicerin Filled 100mm dia dial type
Pressure Gauge and range of 0-15 Kg/cm2 follow as per specification as
239 mentioned in tender volume.. Nos. 10.00 3,575.65
Providing, fixing, testing & commissioning of Pressure Switches for automation
of fire pumps. Pressure switches shall be double pole single throw type suitable
240 for 3 phase supply with diaphragm. Aluminum Enclosure with IP 66 protection Nos. 5.00 2,400.47
follow as per specification as mentioned in tender volume..
Supplying, Installation, Testing and commissioning of C.I.Butterfly valve
conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts,
241 Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Nos. 4.00 14,356.70
of size: 200mm dia
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying, Installation, Testing and commissioning of C.I.Butterfly valve
conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts,
242 Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Nos. 6.00 10,090.94
150mm dia.
Supplying, Installation, Testing and commissioning of C.I.Butterfly valve
conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts,
243 Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Nos. 10.00 6,107.98
100mm dia.
Supplying, Installation, Testing and commissioning of C.I.Butterfly valve
conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts,
244 Washers, Gaskets etc. follow as per specification as mentioned in tender Nos. 8.00 4,773.32
volume..80mm dia
Supplying, Installation, Testing and commissioning of C.I.Butterfly valve
conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts,
245 Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Nos. 8.00 4,199.11
Supplying, Installation, Testing and commissioning of C.I.Butterfly valve
conforming to I.S:13095 class PN 16 rating with Fittings, Flanges, Nutbolts,
246 Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Nos. 8.00 3,419.65
Supplying, Installation, Testing and commissioning of C.I.Ball type Foot valve
conforming to I.S:13095 class PN 16rating with Fittings, Flanges, Nutbolts,
247 Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Nos. 5.00 18,533.30
of size: 150mm dia.
Supplying, Installation, Testing and commissioning of C.I.Ball type Foot valve
conforming to I.S:13095 class PN 16rating with Fittings, Flanges, Nutbolts,
248 Washers, Gaskets etc. follow as per specification as mentioned in tender volume.. Nos. 5.00 6,346.03
of size: 80mm dia.
Providing, fixing, testing and commissioning of C.I. Dual plate type Non-Return
249 Valve class PN 16 rating with fittings, flanges, nutbolts, washers, gaskets etc.of Nos. 8.00 11,041.19
sizes: 150mm dia
Providing, fixing, testing and commissioning of C.I. Dual plate type Non-Return
250 Valve class PN 16 rating with fittings, flanges, nutbolts, washers, gaskets etc.of No. 4.00 5,744.10
sizes: 65mm dia
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supply, Installation, Testing and Commissioning of S.S. Ball Valves with all
251 fittings follow as per specification as mentioned in tender volume.. 25mm dia. Nos. 8.00 1,682.66
Supply, Installation, Testing and Commissioning of S.S. Ball Valves with all
252 fittings follow as per specification as mentioned in tender volume.. 15mm dia. Nos. 12.00 961.52
Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic enamel paint of
Meter 50.00 3,893.10
approved make / shade complete as per specification. 200mm dia
Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic enamel paint of
Meter 150.00 2,391.95
approved make / shade complete as per specification. 150mm dia
Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic enamel paint of
Meter 50.00 1,744.20
approved make / shade complete as per specification. 100mm dia.
Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic enamel paint of
Meter 150.00 1,454.78
approved make / shade complete as per specification. 80mm dia
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic enamel paint of
Meter 150.00 1,119.45
approved make / shade complete as per specification. 65mm dia
Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic enamel paint of
Meter 300.00 806.11
approved make / shade complete as per specification. 50mm dia
Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic enamel paint of
Meter 250.00 654.07
approved make / shade complete as per specification. 40mm dia.
Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic enamel paint of
Meter 300.00 545.06
approved make / shade complete as per specification. 32mm dia.
Providing, fixing, testing and commissioning of Above Ground MS. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) including cutting, screwing, welding etc. and providing all
fittings like flanges, bends, tees, elbows, reducers, clamps, hangers etc. with
painting of one coat of primer and 2 or more coats of synthetic enamel paint of
Meter 600.00 509.37
approved make / shade complete as per specification. 25mm dia.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing, fixing, testing and commissioning of Under Ground M.S. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) with IWL/pypecoat, 4mm thickness wrapping and coating
262 and providing all fittings like flanges, tees, elbow, fasteners with all follow as per Meter 100.00 3,265.73
specification as mentioned in tender volume.. 150mm dia
Providing, fixing, testing and commissioning of Under Ground M.S. ERW Black C
Class Heavyduty pipes as per IS: 1239 (upto 150 mm dia.) and IS: 3589 (upto
mm dia. And above) with IWL/pypecoat, 4mm thickness wrapping and coating
263 and providing all fittings like flanges, tees, elbow, fasteners with all follow as per Meter 250.00 1,679.05
specification as mentioned in tender volume.. 80mm dia.
Providing, fixing, testing and commissioning of SS Single Headed Oblique
Pattern Hydrant Landing Valves as per IS: 5290 with 80 mm dia flanged inlet &
264 mm dia female outlet complete with cap and chain etc. follow as per specification Nos. 8.00 7,439.76
as mentioned in tender volume..
Providing, fixing, testing and commissioning of SS Branch Pipe with nozzle of
mm nominal bore outlet suitable to fit with standard instantaneous type 63 mm
265 dia coupling. As per IS:940 follow as per specification as mentioned in tender Nos. 8.00 2,319.67
Providing, fixing, testing and commissioning of RRL Fire delivery hose 63 mm Dia
in 15 mtrs length with ISI MARKS is 636 type ‘A’ Fitted with Stainless Steel male &
266 female coupling ISI Mark IS :903 duly binned with copper wire winding follow as Nos. 12.00 6,502.28
per specification as mentioned in tender volume..
Providing, fixing, testing and commissioning of weatherproof standard fire Hose
Cabinet wall mounting type 18 Gauge. (750 x 600 x 250) having Double
267 Opening with M.S. fabricated stand, necessary lock & key arrangement follow as Nos. 8.00 6,189.79
per specification as mentioned in tender volume..
Providing, fixing, testing and commissioning of Wall mounting Fix type First aid
Fire Hose Reel with 30 Mtrs Rubber Hose 25mm Dia IS : 444 Type II fitted wit SS
268 Shutt off Nozzle follow as per specification as mentioned in tender volume.. Nos. 8.00 10,877.20
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing, fixing, testing and commissioning of CI Four way Fire Brigade Inlet as
per IS: 904 having 63 mm dia inlet with 150 mm dia Butterfly valve blank cap and
269 chain with necessary fittings, flanges, nutbolts etc. (For System filling & Tank Nos. 8.00 10,528.64
Filling) follow as per specification as mentioned in tender volume..
Providing, fixing, testing and commissioning of CI Two way Fire Brigade Inlet as
per IS: 904 having 63 mm dia inlet with 100 mm dia Butterfly valve blank cap and
270 chain with necessary fittings, flanges, nutbolts etc. (For System filling & Tank No. 1.00 7,043.13
Filling) follow as per specification as mentioned in tender volume..
Providing, fixing, testing and commissioning of 25 mm dia Air Release
Valve and Ball Valve assembly on top of each riser for Air release system follow
271 as per specification as mentioned in tender volume.. Nos. 2.00 2,584.09
Providing & Installation of ABC Stored Pressure Type Fire Extinguisher 6 Kgs.
capacity bearing ISI Mark for Fighting ABC Class of Fire. The Extinguisher will be
272 Manufactured Strictly as per BIS: 15683:2006 bearing ISI. Mark follow as per Nos. 25.00 2,355.72
specification as mentioned in tender volume..
Providing & fixing of Co2 type Fire Extinguisher 4.5Kgs. Capacity, made from the
brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with a
273 Discharge hose and horn and wheel type valve with initial Charge as per IS: Nos. 25.00 5,456.63
15683:2006 specification, bearing ISI Mark follow as per specification as
mentioned in tender volume..
Providing & fixing Modular type ABC Dry Powder Fire extinguishers 5 litre
capacity Fire Extinguishers. The Extinguisher will be Manufactured Strictly as per
274 BIS: 15683:2006 bearing ISI. Mark follow as per specification as mentioned in Nos. 10.00 4,447.03
tender volume..
Providing and fixing, testing and commissioning of K 5.6 Pendent type Standard
Response Sprinkler rating of 57 deg.C. with required accessories.UL Listed follow
275 as per specification as mentioned in tender volume.. Nos. 400.00 372.59
Providing, fixing, testing and commissioning of On -Off Switch follow as per
276 specification as mentioned in tender volume.. Nos. 8.00 408.65
Providing, fixing, testing and commissioning of Manual Call Point follow as per
277 specification as mentioned in tender volume.. Nos. 8.00 408.65
Providing, fixing, testing and commissioning of Hooter follow as per specification
278 as mentioned in tender volume.. Nos. 8.00 455.40
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing, fixing, testing and commissioning of below Auto Glow Signages follow
279 as per specification as mentioned in tender volume.. Emergency Exit 4” X 12” Nos. 15.00 233.17
Providing, fixing, testing and commissioning of below Auto Glow Signages follow
280 as per specification as mentioned in tender volume.. Fire Fighting Equipements Nos. 10.00 406.24
Providing, fixing, testing and commissioning of below Auto Glow Signages follow
281 as per specification as mentioned in tender volume.. Fire Extinguisher 4” X 12” Nos. 5.00 233.17
Providing, fixing, testing and commissioning of below Auto Glow Signages follow
282 as per specification as mentioned in tender volume.. In Case of Fire do not use Nos. 5.00 290.86
Lift ,Use Staircase 8"x 8"
Providing, fixing, testing and commissioning of below Auto Glow Signages follow
283 as per specification as mentioned in tender volume.. Fire Lift 4"x 12" Nos. 5.00 290.86
Providing and fixing of 2000 ltr priming tank having thickness of 8mm sheet
including required accessories flanges, nut-bolt,fasteners etc., with required
284 coats of recd primer and PO Red color. Also provide separate connection for all No 1.00 59,388.00
pumps for pump's negetive suction follow as per specification as mentioned in
tender volume..
Conventional type Smoke detector having following specifications : Dual LED’s for
360 visibility. Advanced detection and communication protocol. Easy installation
and maintenance.
Sleek low -profile housing design.Regular 100mm Base. EN-54 Standard.
Operating Voltage : 10 ~ 28V DC. O O Operating Temperature : 0 C to 37.8 C.
Relative Humidity : 10% to 90%
285 Reset Voltage : less than 1V. Stand by Current : 85 Micro Amps. Start Up Time : No 80.00 1,146.35
30 Seconds.
Cycle time : 28 - 35 Seconds. Alarm Current : 60 mA (Max.). Remote Output :
15mA maximum open collector. Smoke Sensitivity : 0.10 to 0.16 dB/m. Thermal
Rating : 57 C(135 F). complete with Junction box RAVEL make cat no. RE326 2SL
APPROVAL FIRE SYSTEM FROM LOCAL FIRE AUTHORITY
Getting of Fire Fighting System Approval from local fire authority with all other
286 charges and documentations for getting No Objection Certificate.(as per GMB Job. 1.00 30,300.00
Approved rate)
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Laminate Finish Partition
Providing & fixing laminate finish partition up to false ceiling ht (thickness of
partition is 82 mm or as specified in drawing) having 12 mm thick marina
plywood IS 710 grade both side on aluminum framing of gauge 16. Aluminum
framing size for vertical & horizontal support is 50 mm x 25 mm. Grid of
aluminum framing is 600 mm x 600 mm. All exposed surfaces finished with
mm thick Laminate of approved shade complete with mat finish OR E0 greenpro
certified calibrated ply panels, flame retardant & stain resistant UV coated both
side (3 layer: selaer+basecoat+topcoat) & both side 0.5mm veneered (approved
color & shade) with 2mm UV coated wood veneer edgeband applied with hot melt
PUR glue.. Necessary framing to be erected above false ceiling. No extra cost to
be paid for the same. Before installation, make hole/face plate for conduit pipes
of electrical / networking cables with open able stud from partition Including all
materials and labor etc. Make necessary grooves as per shown in drawing and
filling it with epoxy of matchin shade. Using of 12 mm thick clear glass with
proper crystal edges & with suggested frosted films on glass. All joints are
covered with teakwood beading Patti finished with polish matching with laminate
OR . Including door of same design if required Complete with all necessary
hardware & adhesives as per details given in drawing and as per instructions of
Architect/consultant/Engineer In charge. Contractor has to provide all necessary
cut outs (race ways.) for Electrical works & no extra payment shall be made for it.
All ply should follow IS
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Laminate Finish panelling
Providing and fixing 12 mm & 9 mm thick marine ply as per IS 710 fixed on
frame work finish with 1 mm thick Laminate finished paneling based on
aluminum frame having 16 gauge as per require size are placed at 600 x
mm c/c grid both ways supported on top & bottom or fixed on wall/existing
partition with suitable aluminum angles and astends with steel screws &
ADHESIVES. Covered with 1 mm thick suggested shed LAminate complete. The
frame work shall be made from square hollow aluminum section of approved
make conforming to IS specification of size 38 X38 X 1.6 mm vertically and
horizontally. The framework shall be fixed as per drawing vertically @ 600 mm
c/c & horizontal 600 mm c/horizontally and first member shall be fixed at gr.
level. In paneling frame work (intermediate, perimeter ) & (at vertical or
horizontal joint of ply & at turning point ) shall be fixed to the wall/floor &
ceiling with Sheet metal screws/Nylon grip screws of Coro-shield /Fischer and
shall be supported by filling required size wedges /washers/ MS wall
connectors or packing of teak wood /MS washers to ensure right angles and
plumb level. All ply/wooden frameworks shall be treated with anti-termite
treatment & hidden The framework shall be covered with approved make
288 plywood (as per IS 710:2010 and IS 5509:2000),adhesive ,tape, headless nails Sqm 681.00 5,507.11
etc ,finished with laminate in pattern as shown in the drawing having suggested
grooves as per drawing. Rate shall be inclusive of grooves etc complete as per
drawing or as directed by ENGINEER IN CHARGE/ Architect/consultant.
Measurements for paneling work to be recorded up to finished false ceiling level
only irrespective of aluminum frame work, which shall be provided from gr. level
to RCC slab / beams soffit level. Rates shall also be inclusive of cost of making
cut outs/ openings for electrical fixtures, tube lights /air-conditioners ,grills,
diffusers etc and no extra payment shall be considered for additional sections
provided. All curved surfaces, recesses, waffles shall be part of the paneling
including open able shutter wherever required area and finished with the same
material. Rate shall be inclusive of all item which are part of paneling Only the
clear elevation area of finished plywood wall paneling with laminate shall be
measured and paid. Sample mock shall be approved from
Architect/Department.. Complete as per given detail drawings (suggested as per
given nieces,given patterns of grooves etc .All square grooves are finish
Provision of indirect lights gape of 2 to 3"All complete with in proper manner as
suggested by architect/consultant in charge.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Glass Partition (with Wooden or Aluminium framing)
Providing & Fixing Walnut anodized Aluminum Hi-Profile sections (JINDAL-
DOMAL Series) / Wooden , hI-perfomance Fixed partition including glass door
with 10mm thick toughened glass of Saint Gobain or equielent, captive bead,
extremely difficult to remove once glazed, high performance weather stripping,
internal wedge gasket, Bottom, side and top section including necessary filling
up the gaps at junctions, with required EPDM rubber/ etc. and ISI ebco
make,"Lx. Premium" Required Finish door fixture Accessories and Glass film As
per Architect Concept, High security interlocking bead, Sheet membrane flashing
289 , 2" over jamb flashing, New Blocking with new backer rod and sealant, channel Sqm 90.00 9,578.34
glide with runner, slide fold hinge when ever need of sufficient capacity, with
warranty, all types of material, labour, transportation, tools tolerance and
matching required level with Flooring etc. complete as per Architect concept
and as per detailed by Architect / consultant & Directed by EIC.
Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles
having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for
Extra Strength The Light weight calcium silicate ceiling tiles shall have , light
reflection 85% noncombustible as per B.S. 476 part IV, 100% humidity resistance
and also having thermal conductivity0.043° w/m KC.for the best thermal
Insulation . The Light weight calcium Silicate tile shall be of approved texture Fine
fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of
0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level
suspended inter locking metal grid of hot dipped galvanized steel sections
(galvanizing @120 grams per sqm at joints to get required length and size of
24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to
centre, and centre to centre to form agrid of 1200X600mm and secondary thick
290 (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form Sqm 4191.00 1,818.00
grid of size 600X600mm resting on periphery walls/partitions on a perimeter
wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick
(minimum) sheet with the help of rawl plugs at 450mm centre to centre with
25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified
edges light weight calcium silicate ceiling tiles of approved texture (Fine
Fissured/Cosmos/Spintone) in the grid
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections
using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI
suspender channel of size 25 mm x 3 mm with intermediate channel og size
mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size
mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm
291 x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, Sqm 1800.00 757.50
anchor fastener, scoch bolt connecting cleat,joining compound top coat on
ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail
drawing as directed
Laminate finish plyboard ceiling
The works include providing & fixing of Ply Board Ceiling which Incorporates a
fully concealed Aluminum grid. Complete with all necessary hardware, fittings
and accessories. Finish with suggested laminates. The job also includes
providing access panels, cutting of spot lights, luminaries, speaker, etc. Sheets
in size 8’ x 4' Laminates 1 mm in thickness of pattern shown as per drawings..
½” (or 3/8”) screwed on steel stud system. The steel stud frame consisting of
main furring Alum channel at every 600 mm and cross channel at every 600 mm.
Both main and cross channels are attached though jaw clip. Screws will be
corrosion proof either Chromised or Cynated. Screw fixing is done mechanically
292 with drilling machine & suitable attachment. The gaps will be initially filled with Sqm 80.00 6,060.66
jointing compound and then taped by self adhesive covered with proper jointing
compound..Contractor has to provide all necessary cut outs for Electrical works &
no extra payment shall be made for it. Complete as per details given in drawing
and as per instructions of Architect/consultant/Engineer In charge. All ply should
follow IS
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
CORIAN FINISH TOP TABLE
Providing & fixing work station / table having ht of 750 mm Top, with MS Pipe
table is also made up of 19mm Thick. top of Table is Covered with Wooden Finish
Planks or Corian Finish Top as Per Requirement and All internal & external Joints
finished with Burma teak bidding Patti. Bottom Part of Table is Sectionized with
MS Perforated Sheet. All exposed and internal surfaces covered with Wooden
Planks or Corian Finish approved shade & Complete as per detail drawings & as
instructed by Architect/consultant/ Engineer In charge. Complete with all Sqm 3.00 38,471.30
necessary hardware like nails, ss screws, table chain, Key board trey, TDS
channel, adhesives etc. Contractor has to provide all necessary cut outs for
Electrical works & no extra payment shall be made for it
Staff / Computer / Conference / Office Tables (With Drawers)
Providing & fixing office table / staff table having ht of 750 mm Top, with
and Back and side Ply of table is also made up of 19mm Thick. Top of Table is
19mm thk ply E0 greenpro certified calibrated ply panels, flame retardant & stain
resistant UV coated both side (3 layer: selaer+basecoat+topcoat) & both side
0.5mm veneered (approved color & shade) with 2mm UV coated wood veneer
edgeband applied with hot melt PUR glue. Per Requirement and All internal &
external Joints finished with teakwood beading Patti. Item includes fixing of
294 drawers and keyboard tray and storage with shutters under table as per drawing. Sqm 87.00 29,350.96
With grooves shown as per drawing. Complete as per detail drawings & as
instructed by Architect/consultant/ Engineer In charge. Complete with all
necessary hardware like nails, ss screws, table chain, TDS channel, adhesives etc.
Contractor has to provide all necessary cut outs for Electrical works & no extra
payment shall be made for it
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Reading Table / Senior citizen / Student tables (Without Drawers)
Providing & fixing work station / table having ht of 750 mm Top, with MS Pipe
side Ply of table is also made up of 19mm Thick. Top of Table is 19mm thk ply E0
greenpro certified calibrated ply panels, flame retardant & stain resistant UV
coated both side (3 layer: selaer+basecoat+topcoat) & both side 0.5mm veneered
(approved color & shade) with 2mm UV coated wood veneer edgeband applied
with hot melt PUR glue. Per Requirement and All internal & external Joints
finished with teakwood beading Patti. Common or front Part of Table is
Sectationized with MS Perforated Sheet. All exposed and internal surfaces covered
295 with Laminate Finish of approved shade & Complete as per detail drawings & as Sqm 302.00 27,130.54
instructed by Architect/consultant/ Engineer In charge. Complete with all
necessary hardware like nails, ss screws, table chain, Key board trey, TDS
channel, adhesives etc. Contractor has to provide all necessary cut outs for
Electrical works & no extra payment shall be made for it. All ply should follow IS
Storage with Shutter (Laminate FINISH)
Providing & fixing Any Height storage having Any size of having depth of
350mm/450mm/600 mm, having skirting of 75 mm, with proper locks. includinf
of vertical supports & horizontal shelves shown as per drawing made by 19 mm
thick ply, having shutters of 19 mm thick ply or Clear Glass with using 12 mm
thick ply for framing. All complete with proper teakwood beading. and Teakwood
molding as per design. Back ply is 12 mm ply. All ply should be E0 greenpro
certified calibrated ply panels, flame retardant & stain resistant UV coated both
side (3 layer: selaer+basecoat+topcoat) & both side 0.5mm veneered (approved
296 color & shade) with 2mm UV coated wood veneer edgeband applied with hot melt Sqm 785.00 13,815.77
PUR glue. With grooves shown as per drawing All complete with proper hardware
like locks, S.S. Screws, MS Nails, Magnets, table chains, cable manager SS
Handles of 250 mm and 100 mm dia etc. All Details as per shown in detail
drawings & as per instructions of architect/consultant / in charge engineer.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Open Storage Rack (Laminate FINISH)
Providing & fixing Any ht storage having depth of 350mm/450mm/600 mm,
having skirting of 75 mm, including vertical supports & horizontal shelves
shown as per drawing made by 19 mm thick ply, Open Front Side for Selves with
using 12 mm thick ply for framing. All complete with proper teakwood beading
and Teakwood molding as per design. Back ply is 12 mm ply. All ply should be E0
greenpro certified calibrated ply panels, flame retardant & stain resistant UV
coated both side (3 layer: selaer+basecoat+topcoat) & both side 0.5mm veneered
297 (approved color & shade) with 2mm UV coated wood veneer edgeband applied Sqm 995.00 10,381.62
with hot melt PUR glue. With grooves shown as per drawing. All complete with
proper hardware like, S.S. Screws, MS Nails, Magnets, cable manager SS 304 etc.
All Details as per shown in detail drawings & as per instructions of
architect/consultant / in charge engineer.
Notice Board / Pin Board
Supplying of Notice Board of 3'x 3' (or as specified) with all Fixing Arrangement
298 complete as per drawing and Directed by Engineer In Charge etc complete. Nos 100.00 7,259.38
Supplying and providing reading chairs with PP arms with soft PU pads, Seat and
back upholstered with cushioned and MS powder coated frame and cantilever
legs. Overall dimension 590 L x 600 W x 915 H (Or as specified) complete as
299 directed by architect and product as per given specification. Complete as per Nos 763.00 6,060.00
architectural design and concept and approved by Architect & Client.
Supplying and providing High Back Leatherite Chair As per specification below:
-Metal frame seat made of Leather upholstery (foam base)
-Fixed Arm rest
-Knee tilt mechanism
-360 swivel motion/ 100mm stroke gas
300 -Nylon Star base Nos 2.00 15,680.25
-Pushback mechanism & Comfy seating.
-Complete as per architectural design and concept and approved by Architect &
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying and providing Mid Back Leatherite Chair As per specification below:
-Metal frame seat made of Leather upholstery (foam base)
-Fixed Arm rest, PP with soft PU pads
-Knee tilt mechanism
-360 swivel motion/ 100mm stroke gas
-Nylon Star base
301 -Pushback mechanism & Comfy seating. Adjustable controller Nos 30.00 14,518.75
-Twin wheel nylon casters
-Complete as per architectural design and concept and approved by Architect &
Supplying and providing High Back Mesh office Chair As per specification below:
-Metal frame seat made of Mesh fabric upholstery (foam base)
-Adjustable Head rest
-Fixed Arm rest
-Knee tilt mechanism
-360 swivel motion/ 100mm stroke gas
302 -Nylon Star base Nos 7.00 10,738.07
-Pushback mechanism & Comfy seating.
-Complete as per architectural design and concept and approved by Architect &
Supplying and providing Mid Back Mesh office Chair As per specification below:
-Metal frame seat made of Mesh fabric upholstery (foam base)
-Center tilt mechanism
-100mm class 4 gas lift
-PP Fixed Arm rest
303 -Nylon Star base/Twin wheel nylons casters Nos 97.00 5,024.65
-Complete as per architectural design and concept and approved by Architect &
Supplying and providing dust bin made of 100% virgin plastic with paddle.
304 Capacity-10 to 15 Ltr. Nos 120.00 557.52
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Blinds : Providing and fixing as per approved make manual roller blinds with
Soltis fabric & spring drive system with steel ball chain/one touch with speed
control action roller blind with end brackets with head ail, components, bottom
bar.Color-Alu with manual operation and warranty etc as per manufacturer’s
specifications. Fabric to be as per approved sample. All the work complete as per
the detailed drawing and instruction of Architect/EIC. Soltis-99-Color-Alu fabric:
39% Polyester/61% PVC with Aluminum Backing. Weight:290 g/sqm,
Thickness:0.32 mm, Openness Factor:3%, Visible Light Transmission (N-N): 2%-
4%, Solar reflection (white) 65%, Internal Solar Factor (gtot): 0.35 - 0.48, Tensile
305 Strength (Warp/Weft):160/170daN/5cm,Tearing Strength(Warp/Weft):11/13daN, Sqm 618.00 1,962.94
Fungi static Treatment: Degree 0, Excellent (EN ISO 846-A) Fire Retardancy:B-
s2,d0/EN 13501-1. All complete as per approval of designer & instruction of
Project Manager. (The mode of Measurement: The size of the blind will be
measured from end to end bracket (Left to Right bracket) & height will be
measured from top of the pelmet till the bottom of the bottom bar
Waiting Sofa (One Seater) : @ 900(L) x 870 mm (B) x 800 mm (H) comprising up
of Solid teak wood with PU semi gloss finished polish. The seat shall 150 mm th
40 density & back shall be 32 density foam & finished in Approved fabric
upholstery as per the drawing/image and instruction from Architect/EIC all
external & internal exposed woodwork to be finished in PU semi gloss finish
polish. .The work shall be done as per drawing , specifications, sample approved
and as directed by the Architect and Engineer-in-charge. The rate shall be for
complete item inclusive of all material, labour, wastages, necessary tools &
tackles, approved make for all floors, all heights, all levels and all places within Nos 4.00 16,551.38
campus. Contractor shall do all the needful and shall fulfill Architect's design
intent. No additional claims will be entertained for this. Rate shall inclusive of
providing mockup sample for approval of architect. Basic rate of fabric 800/ Rmt
Waiting Sofa (Two Seater) : @ 1500(L) x 870 mm (B) x 800 mm (H)
307 " --------------------Do-----------------------" as per above Nos 2.00 27,585.63
specification for complete work .
Waiting Sofa (Three Seater): 2100mm (L) x 870 mm (B) x 800 mm (H)
308 " --------------------Do-----------------------" as per above Nos 10.00 35,861.31
specification for complete work .
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Center Table:750 x 750x 450 mm
Providing fixing center Table comprisig from 303 BWR ply framing with laminate
finish matching with other furniture with 12mm thick top including rubber
buffers and wooden legs at the bottom of table, , including all type of hardware,
309 fittings, fixtures , tools , tackles , etc complete as per detailed drawing. The work Nos 6.00 12,871.59
shall be done as per the specifications, sample approved and as directed by the
Architect and Engineer-in-charge.
Side Table:450 x 450x 450 mm
Providing fixing center Table comprisig from 303 BWR ply framing with laminate
finish matching with other furniture with 12mm thick top including rubber
buffers and wooden legs at the bottom of table, , including all type of hardware,
310 fittings, fixtures , tools , tackles , etc complete as per detailed drawing. The work Nos 21.00 9,609.95
shall be done as per the specifications, sample approved and as directed by the
Architect and Engineer-in-charge.
Canteen tables (Without Drawers)
Providing & fixing table having ht of 750 mm Top finished with polish granite
and chamfered in all the side face & edges with MS Pipe Structure of Frame.
Complete as per detail drawings & as instructed by Architect/ consultant/
Engineer In charge. Complete with all necessary hardware like nails, ss screws,
etc. This item includes the transportation, labour cost as well.
Providing and fixing Wall art/Photoframes of size 2ftx2ft with wooden frame of
312 size 2in x 1in consisting 6mm thick ply in back with digital vinyl printing and Nos 412.00 3,247.15
5mm thick glass on top if required.
Providing and fixing Godess Saraswati / Swami vivekanand idol (Material- Fibre)
5 ft tall, with proportionately base dimenstion as per approved design by client
313 and complete as per instruction of engineer-in charge and consultant. Nos 2.00 383,295.00
Supply and Planting indoor saplings ( Monstera Deliciosa, Bird of Paradise, Ficus
Bambino, Ficun Benjamina, Areca Palm,etc or specified by Architect) of several
bag size as 13 inch x 13 inch, 8 inch x 10, of height minimum 3ft. inch along
with the Fiber pot of size 1.5ft x 1.5ft x 2ft with mud clay pot inside filled with
Plantation soil & natural fertilizer mix with well branched, well established & free
from disease at site as per the instructions.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Providing and creating Mural Artwork on 2M X 4M Cement/Fibre sheet base,
Duely Painted with Ducopaint , above that artwork in FRP (High end raisins
400net & Cobalt hardner and glass powder) elements { Moulded } as per Design,
Item may Includes any Metal Work, Wood Work, or any Artistic Effect proposed by
Architect., Item may Includes any mosaic/tile, Stone Finishes If Required. The
Complete Muralwork will be Framed by 3" X 2" Section frame in
teakwood,Melamine Polished finish in wallnet finished, Overall Art Effects &
Painting Effect and Colouring is a part of Item. In different colors and shade of
required thickness and shape creating as per detailed drawing provided by an Nos 1.00 649,046.20
architect including providing and using adhesive, white cement, color pigments,
and permanent colors with all labours (including necessary Scaffolding), up to
thirteen meter height, Achieving required look and picture as directed by E.I.C. or
Providing and fixing Photocopier Machine floor mounted With the specification
of: 25PPM Copy /Print / Scan / Color scan, Duplex DADF with network, Trolly and
316 two trays Complete as per Detailed Specification in tender and as per approved Nos 2.00 226,492.50
by Client an Architect.
Providing and fixing Automatic smarttank printer with upto 22 pages per minute
317 print speed, 8 mb memory, Large 100 sheet paper tray with USB connectivity. Nos 15.00 15,157.58
(Model Equivalent to HP 580)
318 Supplying and providing foldabe wheel chair. Nos 10.00 7,423.50
Providing and fixing Flexible PVC Sheet / Vinyl with screen printing in wooden
frame of required size with back ply. Complete as per directed by Architect and
319 Printing subject will be on library theme, slogan, education etc as per finalized by Smt 230.00 989.77
Provoding and fixing Glass film with screen printing. Complete as per directed
320 by Architect and Printing subject will be on library theme, slogan, education etc Smt 300.00 541.20
as per finalized by Client.
Providing and fixing News paper stand size 650 x 820 x 1200 or required height
made out of 18 mm wtr.prf. [MR Grade] ply with 1 mm. thk inner laminate for
top including back panel with shelves for magazine and news paper as shown in
drawing, all expose joints finish with teakwood beadsing patti with polish finish
and provision of openable top for news paper storage complete as per detailed
drawings and Engineer-In Charge and Architect
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supplying approved make domestic refrigerator of 165 Ltr to 185 Ltr storage
322 capacity, single phase minimum 3 star rating. Nos 1.00 15,116.67
Supplying approved make domestic fast gas free cooking, No LPG required with
philips induction cooktop. Triple MOV for upto 4KW surge protection. Sustains
323 high voltage fluctuations. Customised menu configuration. Sof touch buttons, Nos 1.00 7,573.49
compact & portable.
Mobile Compactor Storage System
SYSTEM: 1 UNIT TYPE SIZE QTY
SINGLE FACE FIX UNIT (SFF) NOT APPLICABLE NOT
APPLICABLE
324 DOUBLE FACE MOBILE UNIT (DFM) 4965 (W) X 900 (D) X 2560 (H) Nos 2.00 1,076,478.20
SINGLE FACE MOBILE UNIT (DFM) 4965 (W) X 450 (D) X 2560 (H)
Mobile Compactor Storage System
UNIT TYPE SIZE QTY
SINGLE FACE FIX UNIT (SFF) 3765 (W) X 450 (D) X 2560 (H)
325 DOUBLE FACE MOBILE UNIT (DFM) 3765 (W) X 900 (D) X 2560 (H) Nos 6.00 1,204,127.05
SINGLE FACE MOBILE UNIT (DFM) 3765 (W) X 450 (D) X 2560 (H)
Mobile Compactor Storage System
UNIT TYPE SIZE QTY
SINGLE FACE FIX UNIT (SFF) 3765 (W) X 450 (D) X 2560 (H)
326 DOUBLE FACE MOBILE UNIT (DFM) 3765 (W) X 900 (D) X 2560 (H) Nos 2.00 486,610.43
SINGLE FACE MOBILE UNIT (DFM) 3765 (W) X 450 (D) X 2560 (H)
Book Projection + Interactive
27-inch full HD/4K LED display with capacitive touch functionality, multi-touch
327 support, high brightness and contrast ratio, fast response time, HDMI/VGA/USB Nos. 6.00 153,898.75
connectivity, anti-glare surface, integrated touch drivers, includes installation,
calibration
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Flat Touch Kiosk
Supply, installation and commissioning of 65-inch Interactive Flat Panel Display
(IFPD) with 65” IPS panel, 4K UHD resolution (3840 × 2160), minimum 400 nits
brightness, contrast ratio 1200:1 or better, 178° viewing angle, anti-glare 9H
tempered glass, panel life minimum 50,000 hours, precision IR touch technology
supporting minimum 40 touch points, touch accuracy ±1 mm and response time
<10 ms, built-in Android 14 OS with Google EDLA certification, Octa-core
processor or better, minimum 8 GB RAM and 128 GB internal storage, built-in
speakers minimum 20W × 2, Wi-Fi 6 and Bluetooth 5.2 or higher, connectivity
ports including HDMI IN/OUT, USB 3.0 & USB 2.0, USB Type-C, Touch USB, RJ-45
328 Gigabit LAN, RS-232 and OPS slot, wireless screen sharing from Android, iOS, Nos. 6.00 187,020.08
Windows and macOS devices (minimum 9 devices simultaneously), built-in
whiteboard and annotation software with document viewing/editing and screen
recording features, Google Play Store and Google Drive support, complete with
wall mount, remote control, stylus pens and all required cables, including 3 years
onsite comprehensive warranty
Large Interactive Screen
Indoor Fine-Pitch Active LED Display with Touch Solution, overall display size
approximately 20 ft × 8 ft, pixel pitch P1.17 or better, flip-chip micro LED
technology with die-cast aluminum cabinets, seamless modular design, front-
serviceable construction, minimum brightness 800 nits, contrast ratio 10,000:1
or better, wide viewing angle up to 175°, refresh rate 3840 Hz, 16-bit color depth
with high color gamut, average power consumption ≤100 W/sqm, integrated IR
329 touch system supporting multi-touch interaction, complete with LED controller, Nos. 1.00 6,620,550.00
video processor/media player, power supplies, mounting structure and
accessories, suitable for continuous indoor operation, including minimum 3 years
onsite warranty, complete in all respects and as per satisfaction of the Engineer-
in-Charge.
Small Touch Screen
32-inch Interactive Touch Display with Full HD resolution (1920 × 1080), LED
panel, minimum 250 nits brightness, capacitive touch technology supporting
multi-touch, fast touch response, wide viewing angle, HDMI and USB touch
interface, built-in speakers, VESA mount compatibility, suitable for continuous
indoor operation, complete with required cables and minimum 3 years onsite
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Reception Area Touch Screen
Supply, installation and commissioning of 86-inch Interactive Flat Panel Display
(IFPD) with 86” IPS panel, 4K UHD resolution (3840 × 2160), minimum 400 nits
brightness, contrast ratio 1200:1 or better, 178° viewing angle, anti-glare 9H
tempered glass, panel life minimum 50,000 hours, precision IR touch technology
supporting minimum 40 touch points, touch accuracy ±1 mm and response time
<10 ms, built-in Android 14 OS with Google EDLA certification, Octa-core
processor or better, minimum 8 GB RAM and 128 GB internal storage, built-in
speakers minimum 20W × 2, Wi-Fi 6 and Bluetooth 5.2 or higher, connectivity
ports including HDMI IN/OUT, USB 3.0 & USB 2.0, USB Type-C, Touch USB, RJ-45
331 Gigabit LAN, RS-232 and OPS slot, wireless screen sharing from Android, iOS, Nos. 1.00 314,982.54
Windows and macOS devices (minimum 9 devices simultaneously), built-in
whiteboard and annotation software with document viewing/editing and screen
recording features, Google Play Store and Google Drive support, complete with
wall mount, remote control, stylus pens and all required cables, including 3 years
onsite comprehensive warranty,
TV for Squre Piller
Supply, installation and commissioning of 65-inch Interactive Flat Panel Display
(IFPD) with 65” IPS panel, 4K UHD resolution (3840 × 2160), minimum 400 nits
brightness, contrast ratio 1200:1 or better, 178° viewing angle, anti-glare 9H
tempered glass, panel life minimum 50,000 hours, precision IR touch technology
supporting minimum 40 touch points, touch accuracy ±1 mm and response time
<10 ms, built-in Android 14 OS with Google EDLA certification, Octa-core
processor or better, minimum 8 GB RAM and 128 GB internal storage, built-in
speakers minimum 20W × 2, Wi-Fi 6 and Bluetooth 5.2 or higher, connectivity
ports including HDMI IN/OUT, USB 3.0 & USB 2.0, USB Type-C, Touch USB, RJ-45
332 Gigabit LAN, RS-232 and OPS slot, wireless screen sharing from Android, iOS, Nos. 4.00 187,020.08
Windows and macOS devices (minimum 9 devices simultaneously), built-in
whiteboard and annotation software with document viewing/editing and screen
recording features, Google Play Store and Google Drive support, complete with
wall mount, remote control, stylus pens and all required cables, including 3 years
onsite comprehensive warranty
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Stand for book and touch screen
Touch Screen Floor Stand / Interactive Kiosk Stand, heavy-duty powder-coated
metal construction, compatible with 65” to 86” touch displays, ergonomic
inclined design for standing use, VESA mounting support, concealed cable
management, stable base with floor-mounting provision, suitable for indoor
public and government environments, complete with all mounting hardware.
Providing and Fixing Computer
Equivalent to Lenovo ThinkCentre Neo 50q Gen 4 / INTEL CORE I5 -13420H
PROCESSOR, 16GB RAM, 512 GB SSD M.2 2280 GEN 4, KEYBOARD MOUSE, INTEL
334 WIFI 6 AX201 2*2 AX & BLUETOOTH, 65W ADAPTER, 5 YEAR PREMIER SUPPORT, Nos. 50.00 84,243.60
22" MONITOR, Win 11 Pro license + 5 years warranty
OPS Computer for all touch and Interactive screen
OPS Slot-in PC compatible with interactive touch displays, Intel Core i5 latest
generation processor or better, minimum 16 GB DDR4/DDR5 RAM, minimum
GB SSD, integrated graphics supporting 4K output, dual-band Wi-Fi and
Bluetooth, Gigabit Ethernet, minimum USB 3.0 ports, HDMI/DP output, audio
335 in/out, Windows 11 Pro preloaded or licensed, OPS standard compliant (80-pin Nos. 18.00 84,243.60
JAE), suitable for continuous operation in interactive and classroom
environments, complete with required accessories and minimum 3 years onsite
Development of Ai Library Management System, Software title options (react js
336 details) Nos. 1.00 5,555,000.00
Touch Screen Software
1. Scientist
2. Astronomy and space
337 4. Quiz for UPSC and gpsc Nos. 6.00 580,750.00
5. Politics government structure of all over the world
6. AI tutorials
subject may change at the time of finalization, this is for ideation.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Large Interactive Screen software
1. Tourism
2. District wise History
3. Climate
4. Culture
338 5. Festival Nos. 7.00 505,000.00
7. Ports and sea coast
subject may change at the time of finalization, this is for ideation.
Reception area Screen Software
339 Software Development of Library Guide Map and Current affairs News Nos. 1.00 505,000.00
Virtual Reality
340 Space, Dinosaur, Mission Mars, Moon 360 experience, Software development Nos. 2.00 404,000.00
including hardwares.
Kids Area Interactive Wall
Kids Games
Interactive Sensor / Camera
341 Projector Job 1.00 1,568,025.00
Computer System Server
Intel Ultra 9 285k, Gigabyte z890, AORUS Master,Crucial Ram 128 GB DDR5 Pro
342 5600MHz Gigabyte 5090 WF30C-32GB, Crucial SSD P510 PCIE, Gen25 M2 NVME Nos. 1.00 1,348,269.20
1TB, Gigabyte SMPS 1300W, Liquid Cooler GP-GME-360, Gigabyte Cabinet Aorus
AC500G ST-Black, Windows 11 Pro
Digitalization of books, Conversion of hard paper books into digital fgormat for E-
book purpose. Average 500 pages per book, unit of measurement will be number
343 of a book. Books will be provided by client. Nos. 10000.00 580.75
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Networking of Entire Site
CAT6A UTP cabling, compliant with ANSI/TIA-568 and ISO 11801 standards,
AWG solid bare copper conductor, 500 MHz bandwidth with 10 Gbps support,
LSZH/FR-PVC sheath, CAT6A keystone jacks with modular faceplates and back
boxes, 24/48-port CAT6A patch panels with cable managers, enterprise-grade
managed Layer-2 network switches with minimum 48 × 1G Ethernet ports and
SFP/SFP+ uplinks, VLAN and basic network management features, 19-inch floor-
344 mounted network rack with lockable doors, cooling fans, PDU and earthing, Job 1.00 1,719,020.00
CAT6A factory-molded patch cords, cabling laid in GI/PVC conduits or cable
trays, proper labeling at rack and user end, suitable for connecting minimum
desktop computers and 18 touch screen systems with adequate spare capacity
for future expansion.
Providing & fixing 75' UHD 4K Smart LED TV, Screen Resolution 3840 x
345 pixels with HDR TypeHDR 10+ complete as per approved make and as per Nos 5.00 102,067.51
Library Staff Station Reader
Read/Write/Anti-theft programming should be done in one single operation
Read/Write distance of Up to 30 cm and programming time of up to 1 second
Should be ISO/IEC 14443A, 15693 and ISO 18000-3 compliant
The programming station should interface with the Library Management Software
using NCIP V2.0 protocol
Should be a single reader to read RFID Book Tag & member smart card.
Software Login should happen through staff smart card - Needs to be
Demonstrated
NCIP V2.0 compliant software interface integrated with ILMS for all operations
like patron card personalization, check-in. check-out, renew etc of library
circulation.
346 Device should be USB Powered Nos. 3.00 127,967.00
Operating Frequency: 13.56 MHz
Reader & Antenna Should be in single housing - Needs to be Demonstrated
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Two EAS Pedestals Library Security Gate – 1.5 mtr.
Security gate should include two theft detection pedestals which have an
overlapping protection zones providing additional security.
Provision to directly integrate CCTV camera for photo capturing and sharing the
same over the email on immediate basis – Needs to be Demonstrated
Notifying & listing all accession numbers of unissued/unauthorized books
passing through Gate Antenna system
It is planned to install these pedestals at a single location in the library.
It should have multi line infrared motion sensors to detect library footfalls and in-
out numbers.
The system software shall be able to provide all the statistics of the gate,
including the people counter and the list of items which generated an alarm. -
347 Needs to be Demonstrated Nos. 2.00 579,740.00
It should have minimum 1.5m distance between two pedestal - Needs to be
Demonstrated
Operating Frequency: 13.56 MHz
Communication Interface: Ethernet.
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Self Check In and Check Out Kiosk Station
RFID Reader and Antenna with multiple Read/Write facility
17” or higher LCD/LED Touch Screen Monitor using 3M Capacitive Technology
Branded Small Form Factor CPU with Windows 10 or higher
Single RFID Reader supporting multiprotocol to read patrons smart card based on
ISO 14443A & RFID Book tag based on ISO 15693 both.
Communication interface — Ethernet
The Self Checkout station client software should interface with the ILMS Software
using NCIP V2.0 giving following features:
◦ Check in / out / Renewal
◦ Transaction Status
◦ Transaction Printout
◦ Provision to add Fingerprint/Face recognition - Needs to be
Demonstrated
◦ Book Search facility in form of OPAC screen should be
Available. - Needs to be Demonstrated
Provision for display of reservations done by a user.
Provision of enquiry of checkouts against a user and its due date.
Provision for enquiry of fine against a user
Auto adaptation of screen resolution by application software - Needs to be
Demonstrated
Operating Frequency : 13.56 MHz
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Self Adhesive RFID Tags (for Book)
The RFID chip used in the tag should have been designed specifically for Library
use. i.e. it should have three sections
◦ Lockable section for item identification
◦ Re-writable section for library specific use
◦ Security function (EAS/AFI) for item anti-theft (which can be activated and
deactivated),
◦ The RFID chip should have multi read function, i.e. several tags can be read at
the same time
Tag size should be 80mm x 50mm with at least 2048 bits memory, multi-read
and antitheft
Tags should be fully ISO 15693/18000-3 compliant
Other features: detection rate of the system should be above 95% consistently
349 regardless of the number of items that are in the field Nos. 100000.00 9.09
Mechanical Dimension
• Transponder coil size 76x46 mm ± 0.5mm
• Transponder die-cut size 80 x 50 mm ± 0.2 mm
Electrical characteristics
• Operating frequency 13.56 MHz
• Memory atleast 2048 bits R/W EEPROM
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
Institution Labels
Good quality self adhesive labels of following specification:
Good quality smooth face
Label printed with Name and logo (design to be approved by Department)
Size: 100 mm X 100 mm or bigger
350 Strong permanent adhesive, which does not leach into the paper of the book Nos. 100000.00 2.02
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Smart Cards – Pre-Printed
The smart cards should be 1kb Mifare compatible cards with preprinting on both
sides (design to be approved by Department)
The Smart Card must be ISO 14443-A compliant
The smart card must be for multipurpose use by the library users.
1k byte EEPROM
Unique serial number
16 securely separated sectors supporting multi- application
Each sector consists of 4 blocks with a length of 16 Byte
2 x 48-bit keys per sector for key hierarchy
Access conditions free configurable based on 2 level key hierarchy
Number of single write operations:
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
RFID Digital Entry Reader
Read/Write programming should be done in one single operation
Read/Write distance of Up to 5 cm
Auto exit if card not shown while exiting the library – Needs to be demonstrated
Should be ISO/IEC 14443A compliant
The reader should interface with the ILMS using NCIP V2.0 protocol
Multiple readers can be connected as a part of the systems – Needs to be
demonstrated
Various reports available as per requirement
Operating Frequency: 13.56 MHz
352 Wall mounting enabled Nos. 6.00 10,226.25
Provision to integrate with Door lock & other third party door access systems
Cut off time configurable for auto exit feature – Needs to be demonstrated
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
RFID Book Return Intelligent Trolley
These shelves are to be used by the patrons for returning of loaned books
Number of shelves
Real time check in should be processed through NCIP V2.0
The patrons should not have to go through any process for returning the loaned
Books. They have to just place the books in the intelligent shelves for return of
the books and these returned books should get updated in the library
Should hold pprox.. 80-100 books.
It should have Industrial PC having Touch screen display to show the books
353 Should be compatible to RFID frequency 13.56MHz. The shelves should have Nos. 1.00 446,068.52
EAS/AFI functionality.
Possible to return multiple books at once.
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Integration Module / Middleware Features
Client Software should be Integrated with existing Integrated Library
Management Software (ILMS) using NCIP V2.0
Dashboard – Library usage statistics – Need to be demonstrated
Tagging / Re-tagging after proper online validation of the title / member records
from ILMS database
Tag monitoring by accessing item record from ILMS database
Provision to restrict issue of reference books – Needs to be demonstrated
SMS/email/Print configurable for all users individually
NCIP V2.0 /SIP2 compliance
Retagging option for re-registration of books & patrons
Check out /Check-in/Renewal
Remote shutdown/restart for Kiosk & Book Drop – Needs to be demonstrated
Provision of enquiry of checkouts against a member and its due date
Provision for details of fine against a member
Provision of Auto login to staff station using registered smart card
Provision of Circulation rights assignment to multiple users
Provision to block the circulation transactions if a member’s fine exceeds
354 configurable limit – Needs to be demonstrated Nos. 1.00 136,350.00
Provision to perform Auto Check-in of books so that large quantities of books
can be checked in quickly
Provision to block the members to prevent circulation operations
Provision of Various reports should be available like tagged items, registered
members, circulation transactions etc. filtered by the operator, RFID client, etc. –
Needs to be demonstrated
Provision to generate report of unissued items detected at gate system and
capturing their photo through CCTV and sharing the same with library staff by
email – Needs to be demonstrated
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Tagging Job Work
RFID Tag & Sticker to be pasted in same process
ISO 28560 standard followed for tagging
Registration of books / DVDs to be done in single process
Retrieving the Book from the shelf and returning the same to the Specific shelf
355 after processing as per Library standards for all Books. Nos. 100000.00 4.04
All RFID equipments must integrate with existing SOUL LMS as well as existing
RFID System.
Supply, Installation, Testing and Commissioning of Card Access Control Terminal,
Weigand Communication Interface, Read Range: Up to 10 cm, IP65-rated rugged
356 structure. With a 2-door controller Nos. 2.00 35,741.43
Approved Make: Suprema / ID Cube / ZKTeco
Supply, Installation, Testing and Commissioning of Access Control software (For
357 1000 Nos) Nos. 2.00 155,484.45
Approved Make: Suprema / ID Cube / ZKTeco
358 Supply, Installation, Testing and Commissioning of Blank Card Nos. 2000.00 311.97
Supply, Installation, Testing & Commissioning of swing type Flap Barrier
degree openable with High Safety 2 STD Lane of 600mm aisle width, Wing Height
should be 900MM Toughened Glass in SS304 Stainless Steel Cabinet with High
Torque Motor, Normally closed mode operation with Lane Indicator for passenger
signalling. It should be IP 32 rated for indoor application. The use of Brush-less
DC motor with MCBF 10 million cycles for very quick reversibility and enhanced
359 pedestrian safety. Offering a through put of upto 30-40 persons per minute. Set 2.00 526,772.32
Power consumption 35 watt for Standard passage width of 600 MM. Compatible
with biometric devices or face access control terminal (1 Std + 1 Std set)
Approved Make: ParknSecure / Magnetic / ZKTeco
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Supply, Installation, Testing & Commissioning of 2 Lane swing type Flap Barrier
90 degree openable with High Safety 1 STD Lane of 600mm and 1 wide Lane of
900mm aisle width, Wing Height should be 900MM Toughened Glass in SS304
Stainless Steel Cabinet with High Torque Motor, Normally closed mode operation
with Lane Indicator for passenger signalling. It should be IP 32 rated for indoor
application. The use of Brush-less DC motor with MCBF 10 million cycles for very
360 quick reversibility and enhanced pedestrian safety. Offering a through put of Set 2.00 568,728.12
upto 30-40 persons per minute. Power consumption 35 watt for Standard
passage width of 600 MM Compatible with biometric devices or face access
control terminal (1 Std + 1 Wide set)
Approved Make: ParknSecure / Magnetic / ZKTeco
Supply, Installation, Testing and Commissioning of 4C x 1 sq. mm. copper
361 unarmoured cable with all accessories Rmt 200.00 674.93
Approved Make: Polycab / Avocab / Caliplast
AMC Contract per year for computer system
Comprehensive maintenance of computers and peripherals, including preventive
and corrective maintenance, two service visits per year, hardware cleaning,
software updates, troubleshooting, repair of faults, replacement of defective
parts as per contract, maintenance of service logs, on-call support during
Years 4.00 58,075.00
contract period, professional and timely service by qualified technical staff. The
Bidder shall deposit 4 equal amount FD’s to Sports Authority of Gujarat as
Quoted in O&M item. These four FD’s Will be released one-by-one year wise after
successful
Contract Networking per year
Annual Maintenance Contract (AMC) for complete LAN networking system
including switches, structured cabling and racks, covering preventive
maintenance and health check twice in a year, inspection of all network points
363 and equipment, rectification of minor faults, replacement of defective patch Years 4.00 174,225.00
cords/connectors if required, and ensuring smooth and uninterrupted network
operation throughout the AMC period. The Bidder shall deposit 4 equal amount
FD’s to Sports Authority of Gujarat as Quoted in O&M item. These four FD’s Will
be released one-by-one year wise after successful O&M.
Operation and Comprehensive Maintenance of Internal Entire Smart Technology
area system with all accessories (24 hours on each day excluding Sundays and
Gazetted Holidays) including breakdown maintenance including repair and
364 replacement of worn-out items with minimum down time after date of Nos. 4.00 2,211,900.00
completion as per enclosed terms & conditions For Each Year. The Bidder shall
deposit 4 equal amount FD’s to Sports Authority of Gujarat as Quoted in O&M
item. These four FD’s Will be released one-by-one year wise after successful
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
Total Amount
Total Amount
Total Amount Rs. =
Total Amount Rs. =
I/We am/are willing to carry out the work @............ % above/below percent ( should be written in
figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as
Estimated amount put to tender Estimated amount put to tender
Deduct:……………………...….% below Add……………………..……..% above
IN words IN words
(Please strike out whichever is not applicable.)
The Contractor shall exhibit a board with detailed specification and details of work as directed by
1 the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
Sr. Qty. May More Tender Rate
Description of Item Unit Total Amount
Description of Item Unit Total Amount
No. Or Less Rate In FIghure
In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-
10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where
there is a change as per actual mix design the cost of difference of cement consumption have been
deducted from the rate of original item at the rate of input rate mentioned in all the tender.
Signature of Contractor with Seal Signature of Contracting Authority with Seal
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1.0 NIT GANDHINAGAR.pdf
2.0 Central Library of Gujarat SBD - 06.06.26.pdf
3.0 Schedule B.pdf
4.0 Specification Index.pdf
5.0 Detailed Specification Electrical.pdf
6.0 General Specification For HVAC and Firefighting.pdf
7.0 TECHNICAL SPEC FOR WATERPROOFING.pdf
8.0 SPECIFICATIONS FOR LIFT.pdf
9.0 Mobile compactor storage system.pdf
10.0 GENERAL Civil Technical Specification.pdf
11.0 _ADDITIONAL_CPWD_SPECIFICATION_VOLUME_1_C1.pdf
12.0 _ADDITIONAL_CPWD_SPECIFICATION_VOLUME_2.1_C1.pdf
13.0 _ADDITIONAL_CPWD_SPECIFICATION_VOLUME_2.2_C1.pdf
14.0 _ADDITIONAL_CPWD_SPECIFICATION_FIRESYSTEM_C1.pdf
15.0 R and B Specifications Booklet Electrical.pdf
16.0 LIST OF APPROVED MAKE LIST CIVIL.pdf
17.0 PLUMBING MAKE LIST.pdf
18.0 LIST OF APPROVED MAKE ELECTRICAL.pdf
19.0 LIST OF APPROVED MAKE FURNITURE.pdf
Download all tender documents and submit your bid