Work

Amount

Erection of following equipments including shifting of material from store to site including proper fixing with the structure / Anchor Bolt along with other relevent jobs to complete the work in proper way as per UPPTCL Norms: -

36KV VCB

36KV Current Transformer

36KV C.T. Junction Box

36KV Bus Isolator

36KV Line Isolator

Laying of following sizes Control Cables in the Cable Trenches from Control and Relay Panels in Control Room to various Equipments, Junction Box etc. in Swithcyard as per cable schedule, including carriage of Cable Drums from Stores to work site & shifting back to stores including allother associated works required for the satisfactorily completion of the Job as per technical specification.

Interconnection & termination of of the above laid control cables and other work.

Interconnection & termination of of the above laid control cables between Control and Relay Panels & erected equipments i.e. CB, CT, CT Junction Box, PT, PT Junction, box. Including making necessary holes in Gland Plates or Boxes whereever required along with supply of Cable glands of appropriate size and providing of Ferrules for each core of the cables & its termination with crimping type Copper Lugs alongwith preparation of Interconnection Drawing and Commissioning of the Panel/ Feeders in co-ordination with T&C Wing includoing providing 02 sets of Hard Copies of as executed Interconnection Drawing including all other associated works required for the satisfactorily completion of the Job as per technical specification. (01 Job for Each Bay)

Erection of Lattice type main and auxiliary structures with other associated works to complete the job as per required as per technical specification of UPPTCL CCM-04 No,CGM-02No.,CPM-4No.,YMM-4 No., ALP-3 No., ABL-3 No.

Cutting, Straightening and Laying 700 mm below inside ground & above ground of 75X10 mm, 50X6 mm, 25X6 mm size M.S. Flats (to be provided by the department) as per requirement for Earthing of newly erected equipments and Structures as above including welding with main Earthmat and with the object to be earthed including excavation, backfilling, painting of the Earthmat above groung level in Bus Green colour including all other associated works to complete the job satisfactorily as per Technical Specifications.

Earthing of Structures and Equipments with 75X10 mm size M.S. Flat

Earthing of Structures and Equipments with 50X6 mm size M.S. Flat

Earthing of cable trenches with 25 mm x 6 mm size M.S. Flat

Painting of Earthing strips above ground level with one coat of Red oxide and two coat of synthetic/ enamel paint and with black Bitumen paint below ground level as per details below:

75x10 mm (in green color)

50x6 mm (in green color)

25x6 mm (in black color)

Laying and stringing of 33 K.V. Main Bus Bar of Twin ACSR Moose Conductor(03 No)and 33 KV Jack Bus Bar panther conductor(03 No.) including hoisting of disc insulator tension string with associated tension fitting and disc insulator suspension string with associated suspension fitting from gantry along with shifting of the new conductors, tension fittings, suspension fittings etc. from stores at the Sub Station to the switchyard. (01 Job for each phase of each section of the Main Bus Bar )

Laying and stringing of 33 KV Jack Bus Bar panther conductor(03 No.) including hoisting of disc insulator tension string with associated tension fitting and disc insulator suspension string with associated suspension fitting from gantry along with shifting of the new conductors, tension fittings/ suspension fittings etc. from stores at the Sub Station to the switchyard. (01 Job for each phase of each section of the Jack Bus)

Jumpering with Twin ACSR Moose / Panther Conductors from newly laid 33 K.V. Main Bus Bar / Jack Bus Bar Conductors to Main Bus/Jack Bus Isolators of 33 K.V. Feeders / by due cutting & bending of conductors and tightening of jumpers with P.G. Clamps, connectors along with shifting of the conductors, PG Clamps, connectors from stores at the Sub Station to the switchyard.(01 Job for each jumper)

Fixing of 250/100/75 mm size Spacers (Bolted type) for ACSR Moose to Moose panther to panther between above laid 33 K.V. Main Bus Bar Conductors of Twin ACSR Moose& Twin moose jumpers of T/F. (01 Job for each spacer)

Safe Loading, Carriage of various euipments like- 33 KV VCB, Control cables & power cables of various size, MS Flat of various size, 33 KV CT etc. required for construction of 2 No. 33 KV Bay , from Various 220/132 K.V S/S UPPTCL To 132 KV substation Gomtinagar , Lucknow and Unloading at storage place as per direction of Supervising Engineer including cost of Hydra, Carriage vehicle, Men, Misc. consumables, T&P, making coil of cables before loading etc. required for satisfactory completion of Job.(01 Job for all items)

Jumpering of various equipments with Twin ACSR "Panther Conductor " in after due cutting and bending of conductor and fixing & tightening etc of the Conductor/ Clamps/Connectors/Spacers etc.(2 No. 33 KV bay )

Supply & Fixing of outdoor type 03 Phase AC Cubical Boxes of size 1200X600X300 mm duly Painted with one Coat of red oxide primer and two coat synthetic enamle smoke gray paint with 04 no aluminium insulated bus bar for connecting ACDB and fitted with 01 no 100 Amp isolator switch along with three no 3-phase MCB of rating 32A 09 nos 3 phase mcb rating 16A, 12 nos 1 phase MCB of Rating 6 A mcb havels make . The cubical box should be made of 16 SWG M.S. sheet in the Double shutter with indoor locking arrangment complete with proper size wire TBs for incoming terminals and 18 nos TBs for outging terminals of Standerd size and rating . Proper Fixing installation testing and commissining of above cubical box including all civil and other associated works

Laying of Power cable of size 3.5X50/95 mm between main ACDB to AC cubicle box if required after exacavation of trench Laying the first class brick lining .Filling of river sand along and over the cable then back filling and leveling the trench after the cable . The work also includes termination of cable on both side with crimping of lugs .

Supply & Fixing of Junction Box of size 280X225X150 mm duly made of 16 SWG M.S. BP sheet and pinted with smoke grey colour synthetic enamel paint duly fitted with 01 No. 6 Amp SP MCB on anodized MS chanel 01 No. Bakelite fuse fitting with 6 Amp capacity, 01 no. 6A capacity NS6 type HRC fuse , 01 No. Copper Neutal link ,Bakelite terminal block of 04 terminal ,cable glands suitable for 2C/4C X2.5 sqmm size including/ outgoing cables etc. and installation of junction box with 12 SWG GI wire pole including cable termination with satisfactory testing and commissioning

Supply of 5 No. U-Bolted type Single Tension Fitting Assembly with Turn Buckle, suitable for Twin ACSR Moose Conductors and 33 K.V. Bus Bar Disc Insulator String, comprising of 4 No. 70 kN disc insulators, complete with hardware fittings, D-shackle, socket eye, ball hook, yoke plate, D-clip, tension clamp etc. as per technical specifications and sample.

Supply of 5 No. U-Bolted type Single Tension Fitting Assembly without Turn Buckle suitable for Twin ACSR Moose Conductors and 33 K.V. Bus Bar Disc Insulator string, comprising of 4 No. 70 kN disc insulators, complete with hardware fittings, D-shackle, socket eye, ball hook, yoke plate, D-clip, tension clamp etc. as per technical specifications and sample.

Supply of Spacer, suitable for 33 K.V. Bus Bar of Twin ACSR Moose Conductors with 250 mm spacing duly made of LM-6 aluminium alloy complete with 12 mm size dia. Hot Dip G.I. Nuts & Bolts and Plain / Spring Washers as per technical specifications and sample.

Supply of Spacer, suitable for Jumper of Twin ACSR Panther Conductors with 75 mm spacing duly made of LM-6 aluminum alloy complete with 12 mm size dia. Hot Dip G.I. Nuts & Bolts and Plain / Spring Washers as per technical specifications and sample.

Supply of 33 K.V. Bus Isolator Bi-Metallic Terminal Connector suitable for Twin ACSR Panher Conductor duly made of LM-6 aluminum alloy complete with 4 Nos. 12 mm size dia. holes with Hot Dip G.I. Nut & Bolts and Spring / Plain Washers as per technical specifications and sample.

Supply of 5No. U-Bolted type Single Tension Fitting Assembly with/without Turn Buckle suitable for ACSR Panther Conductors and 33 K.V. Jack Bus Disc Insulator string, comprising of 4 No. 70 kN disc insulators, complete with hardware fittings, D-shackle, socket eye, ball hook, yoke plate, D-clip, tension clamp etc. as per technical specifications and sample.

33 K.V. C.T. Bi-metallic Clamp duly made of Aluminium Alloy (LM 6), suitable for 33 K.V. CTs and Twin ACSR 'Panther' Conductor, complete with HDG Bolts - Nuts - Washers, as per sample.

P.G. Clamp made of LM - 6 Alloy having suitable for Moose' to 'Panther' Conductor, complete with Bolt - Nut - Washers (4 No. Nut & Bolts), as per sample.

P.G. Clamp made of LM - 6 Alloy having suitable for ACSR 'Panther' to 'Panther' Conductor, complete with Bolt - Nut - Washers (4 No. Nut & Bolts), as per sample.

75x10mm MS Flat

50x6mm MS Flat

25x6mm MS Flat

Supply of 120Watt LED street Light Luminaries fittings of Philips/Cromton Greaves/Havells/ Bajaj make in piece dia. cast aluminium alloy housing with pot optics reflector and toughened clear glass cover with frame from lamp compartment including cable termination port.

MANAS ELECTRICALS (BID ID -5550534)

SARASWAT ELECTRICALS (BID ID -5551101)