Widening and strengthening of Existing apron and taxi at Bareilly Airport. SH- SITC of Apron Flood Light Mast

Amount

Design, SITC of 20 mrt. High mast , GI Polygon continuously tapered in one /two sections suitable for wind speed as per applicable IS 875 Parts- 3, with raising lowering system comprising , head frame, luminaries carriage suitable to install min 10 luminaries in Asymmetrical arrangement as per lighting Design, double drum winch, 6mm diameter SS wire rope , trailing Cu. cable suitable current carrying capacity between top carriage and the base terminal (inside mast) including supplying & laying of required length of 1.1 KV grade of suitable size XLPE insulated PVC sheathed armoured Aluminium conductor power cable between Feeder Pillar of High Mast and Base Terminal in DWC HDPE pipe of suitable size alongwith supplying & making end termination with heavy duty Brass compression gland , with connector, intergal power tool motor, manual handle ,lightning Arrestor , junction box ,weather proof and vandal resistant door flush with the exterior surface containing a terminal plate thick backlite sheet with 32 Amp heavy duty connector for loop in loop out cable terminations etc. complete as required including of followings.... i) Supply of LED floodlight type 400 W LED (BAJAJ MAKE :PRAZE WBJFL 400 W LED or equivalent as per list of approved make) (Clamps ,bolts etc as required to mount on lantern carriage to hold fittings) -min 7 Nos. ii) Supply of LED type double dome aviation obstruction light.-01 Nos iii) Supply of outdoor stand mounted feeder pillar, Installation of the feeder pillar by grouting the stand in concrete, dust and vermin proof with 2 Nos. (1No for Incoming supply and 1 No for spare) 32A TPN MCB incomer , single dial time switch ,22A TP contactor for the automatic switching of luminaries, power tool control with suitable contactors and raise and lower push button, terminals for incomer 35 sqmm and outgoing 16 & 2.5 sq.mm -01 set

Design of foundation, including excavation in soil and RCC (M 25 grade) , bolts, nuts, washers, anchor plates ,rigid flange plate and common template as per OEM recommendations etc complete as required for 20 mtr High mast, and considering safe soil bearing capacity 10T/sqmtr at 2 mtr depth.

SITC of Integral LED flood light lumanaries 400 W, its control Driver/Accessories, Clamps, bolts etc as required to mount on Existing 20 Mtr High Mast, including all minor works i.e. counter weight, raising and lowering liuminaies carriage etc complete as required. (BAJAJ MAKE :PRAZE WBJFL 400 W LED or equivalent as per list of approved make)

Supply of following size of 1.1 KV grade, ARMOURED,XLPE insulated PVC sheated Aluminium conductor cable confirming to IS: 7098 part -I amended upto date.(i).4CX 25 sq mm

Laying of one number PVC insulated and PVC sheathed/ XLPE 4 core aluminium conductor cable of 1.1 KV grade of size not exceeding 35 Sq. mm in the existing RCC/HUME/METAL/HDPE Pipe as required.

Supply and laying 80 mm dia medium class GI pipe direct in ground including execavation existing pavement size of 75cm (depth), and refilling etc as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(i).4C X 25 sq. mm

Supply and laying of 63 mm outer Dia ISI marked Double Walled Corrugated high density polyethylene pipe (DWC-HDPE) having corrugation on the outer wall confirming to IS 14930 Part-II complete with necessary fittings for jointing for protection of 1.1 KV grade under ground cable including excavation in hard soil and refilling etc. including removing Pavers Block, PCC(position cement concrete)1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and refixing Pavers Block complete as required.(i).63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25mm x 5mm Gi strip on surface or in recess for connections etc as required.

Supply of 5 kv Type C without metallic screen, Cross-linked polyethylene 6 Sqmm, unshielded round stranded, bare copper class 2 with Polyethylene (PE) outer sheath cable as required as per the technical specification. UN-SHIELDED, PRIMARY CABLE 1CX 6SQ MM

ANU ENGINEERING CORPORATION

M J ELECTRICALS AND ELECTRONICS

Awasthi Electric Works

M/S EKTA ENTERPRISE SES PRIVATE LIMITED

jaydeep agency corporation

elektron

CENTRE TAP ENGINEERING