REPAIR MAINTENANCE AND REPLACEMENT OF INTERNAL WIRING MCBs DBs SUB MAIN WIRING AND ELECTRICAL FITTINGS IN SINGLE AND MD JCOs OR ACCN AT PALAMPUR MIL STN

Amount

Taking down old unserviceable copper/ aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed.

Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed.

M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed. Notes : (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof/celing PVC casing 'N' capping shall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.

All as per the description of serial item No 04 here-in-before but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directed.

All as per the description of serial item No 04 here-in-before but one 5 pin socket outlet, 5 amps, independent complete all as specified and directed.

All as per the description of serial item No 04 here-in-before but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.

M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLSH, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLSH, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid conduit medium grade, ISI marked including pressed steel with existing colour terminated boxes of Modular GI sheet Metal flush Boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note:- (a) Wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.

All as per the description of serial item No 8 here-in-before but 5/6 Amp socket outlet on same board complete all as specified and directed.

All as per the description of serial item No 8 here-in-before but socket outlet 5/6 Amps independent board complete all as specified and directed.

All as per the description of serial item No 8 here-in-before but for one 6 pin socket outlet 15/16 Amps on independent board with cables 2.5 sqmm size complete all as specified and directed.

S&F switch piano, flush type single pole one way 6 Amp, 240 volts ISI marked complete all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin, 6 A complete all as specified and directed.

S&F socket outlet 3 pin, 6/16 Amp, flush type, 240 Volts, 6 pin flush type complete ISI marked complete all as specified and directed.

S&F switch piano, flush type single pole, one way 16 Amps, 240 volts ISI marked complete all as specified and directed.

S&F ceiling rose, 3 terminal surface type complete all as specified and directed.

S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ding dong bell musical type AC 230 volt single pole complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.

S&F modular switch 1 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed.

S&F modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed.

S&F socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F modular bell push 6A 1 module complete all as specified and directed.

S&F modular fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed.

Supply & fixing surface /wall mounted light fitting pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make:- Cat Part No for batten:- STREAKT8UPTO 1X22WSSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved. Cat Part No for Tubelight:- PHOTANULTRAE2.0 1213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LED tube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved

Supply & fixing energy efficient LED light of 10/12 Watt of length - 02 Feet long having minimum 1100-1300 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Make:- Cat part No: -LUMILINEPLUSSBS 10WLED865SPCSS of make Havells 'or' BN 021 LED10S- 6500 PSU GR S1 of make Philips 'or' LDL-10-WW of make Crompton or its equivalent as approve

Taking down old burnt out bulk head fitting any type and supply and fix LED bulk head 10W with pressure plastic housing with clear prismatic diffuser, high efficient LEDs IP66 complete all as specified and directed. Make Crompton/Havells/Bajaj

S&F Sheet metal enclousers, TPN distribution board 4 way, double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

M&L distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed. Note:- Distribution board and MCB's should be same make.

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F of SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F of 415V 10KA 'B' curve TPN 63 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note:- Wiring shall be done in proper colour coding.

M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connecting to GI earth wire of size 4mm size by means of bolts, nuts, check nuts and protected by provision of GI medium grade pipe of 15mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no less than 4Kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm dia pipe for watering of suitable length placed on tp edge of earth plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m complete all as per plate No. 3 of SSR 2009 Part-I and connecting to earth test point all as specified and directed by Engineer-in-Charge and including testing on completion.

Note:-(i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B1, 80mm thick reinforcement with 8mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item. (ii) Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50m and the rate includes in the unit rate of item. (iii) Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includese in the unit rate of item. (iv) The earth chamber shall be constructed 5m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate for this item.

S&F in repairs switch piano flush button type 6 amps single pole one way. complete all as specified and directed.

S&F in repairs socket outlet multipurpose 2/3 pin 6 amps flush button. complete all as specified and directed.

S&F in repairs switch piano flush button type 16 amps single pole one way. complete all as specified and directed.

S&F in repairs switch socket combination 6/16 A 250V AC universal with box in polycarbonate. complete all as specified and directed.

S&F in repairs socket outlet multipurpose 2 in 1, 6 and 16 Amps. complete all as specified and directed.

S&F in repairs ceiling fan regulator step type for 1200mm/1400mm sweep ceiling fan including connections. complete all as specified and directed.

S&F in repairs single core flexible PVC cable 1.5 sqmm of standard copper conductor PVC insulated unsheathed cables of 1100 volts complete all as specified and directed.

M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sq mm for phase and neutral and one run of 4.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note:- Wiring shall be done in proper colour coding.

M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed. Note:- Wiring shall be done in proper colour coding.

S&F in repairs angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in repairs 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F in repairs SPN 40 to 63 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S&F in repairs MCB TPN 63 amp, 415 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for 10 KA breaking capacity complete all as specified and directed..

S&F in repairs sheet metal enclousers, TPN Distribution board 4 way, double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

M&L in repairs distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed. .

M&L in repairs distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed.

M&L in repairs distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed.

S&F in repairs environmental friendly, ultra modern, energy saving, surface mounted,decorative oval bulk head edgy-fit LED 10/12 watt luminaire comprising of high brightness LEDs complete all as specified and directed.

S&F in repairs surface mounting 9/12 watt LED mirror light fitting of 2 feet length complete all as specified and directed.

S&F in repairs PVC surface box 3 module with 5 amp switch and socket complete all as specified.

S&F in repairs PVC surface box 3 module with 15 amp switch and socket complete all as specified.

S&F in repairs PVC LT insulation tape roll of size 25 mtr complete all as specified.

S&F in repairs PVC insulation empire tape roll of size 25 mtr complete all as specified.

S&F in repairs PVC casing caping of size 20mm, ISI mark complete all as specified.

S&F in repairs rigid non-metallic PVC conduit of size 20mm, ISI mark complete all as specified.

S&F in repairs Hylem sheet 3mm thick of size 9" x 11" including cutting of sheet for fixing swtich/socket complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 8" x 5" including cutting of sheet for fixing swtich/socket complete all as specified and directed.

S&F in repairs Hylem sheet 3mm thick of size 5" x 5" including cutting of sheet for fixing swtich/socket complete all as specified and directed.

Note for Srl item No. 37 to 64 1. The contractor has to maintain a separate complaint slip book and complaint register for attending the day to day complaints pertain to internal electrification. 2. The Contractor/rep have to collect daily complaints from E&M complaint cell Palampur Mil Stn and get them signed from user after completing the job and submit to E/M complaint cell. 3. The contractor has to complete the work assigned for above items within 36 hours failing which recovery at the rate Rs. 25 per day per complaint will be recovered. 4. The contractor will ensure deployed of sufficient manpower with equiped all sort of petty items such as insulation tape, galvanised screws, nuts, bolts, washers etc required to accomplish the job and also ensure as availability of every type of requisite T&P items to his tradesman

M&L 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including 4mm dia suspension GI wire with stranded conductor 06 sqmm twin core cable flat or circular including taking down old unserviceable cable and stacking at site complete all as specified and directed.

M&L 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including 4mm dia suspension GI wire with stranded conductor 10 sqmm twin core cable flat or circular including taking down old unserviceable cable and stacking at site complete all as specified and directed.

M/S Bharmouri Construction

SAINI AND SAINI BUILDERS

M/S SEALINE BUILDERS

M/S CHAIN SINGH CONTRACTOR