REPAIR/ MAINT OF STREET LIGHTS, INTERNAL ELECTRIFICATION IN OTM/MD ACCN AT AREA A AND C AT AF STN WADSAR

Amount

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) including old unserviceable fixture and fittings complete etc removing the materials for taking credit and making good the disturbed surface of wall/floor etc complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring with aluminum conductor cable 4/6/10/16 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc complete all as specified and directed.

M & L for concealed point wiring complete with FRLS PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly, drawn through in existing conduit pipe fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0 mm thick laminated sheet where as required and accessories suitable for One light/fan point Controlled by one way switch complete all as specified and directed by Engr-in-Charge.

All as per item No 3 here in before but One 3 pin socket outlet 5 amps socket on independent board with cables 1.5 sqmm size

All as per item No 3 here in before but One 3 pin socket outlet 5 amps socket on Same Board with other switches, with cables 1.5 sqmm size

All as per item No 3 here in before but One light point controlled by two 2-way switches, with cables 1.5 sqmm size

All as per item No 3 here in before but One bell/ buzzer point controlled by one push button

All as per item No. 3 here-in-before but with 2.5 sqmm cable for one 3 pin socket outlet 15 Amps on independent board with 2.5 sqmm cable as earthing conductor.

M&L for point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable 1100 volt grade, (FRLS) through and including 20X12 mm PVC casing-n- copping and its accessories, cadmium screws and including 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor cable(FRLS) as earth continuity conductor and MS boxes made of 16 gauge MS sheet concealed type on walls cover 3mm thick for housing One light/fan point Controlled by one way switch complete all as specified and directed by Engr-in-Charge.

All as per item No. 9 here-in-before but One 3 pin socket outlet 5 amps socket on independent board with cables 1.5 sq. mm size

All as per item No. 9 here-in-before but One 3 pin socket outlet 5 amps socket on Same Board with other switches, with cables 1.5 sq. mm size

All as per item No. 9 here-in-before but One bell/ buzzer point controlled by one push button

All as per item No. 9 here-in-before but with 2.5 sqmm cable for one 3 pin socket outlet 15 Amps on independent board with 2.5 sqmm cable as earthing conductor.

S&F in repair 2 way sheet metal enclosures for flush/surface mounting distribution board single door, 240 volts factory made and tested complete, suitable for mounting MCBs with 200 Amps rated bus bar, cable lugs complete all as specified and directed.

All as per item No 14 here-in-before but 4 way

All as per item No 14 here-in-before but 8 way

All as per item No 14 here-in-before but 12 way

All as per item No 14 here-in-before but 4 way 415 volts TPN DB

S&F for sub main wiring/power wiring with 2 runs of 4 sqmm PVC insulated stranded copper conductor FRLS cable and one run of 4sqmm copper FRLS cable as earth lead in PVC casing caping complete all as specified and directed.

All as per item No 19 here-in-before but with 10 sqmm

S&F in replacement of LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vaporgroup of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver,holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in replacement of Flame proof and weather proof single pole rotary/cam switch on-off with direct entry single pole 16A on-off in AL LM-6, 230V complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm thick electrode, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to 4 mm dia galvanized earth wire by means of bolts, nuts, check-nuts and washers of galvanized iron or steel all as shown in electrical plate No 5 (duly protected with 15 mm dia light grade GI pipe upto 7.5m from the earth plate) and connected to GI steel earth plate including charcoal, dust, common salt, necessary excavation in soft/loose soil, returning, filling in and removal of surplus soil to a distance not exceeding 50 m from the starting point, watering pipe 20 mm bore GI tube of light grade treated with 1 No PGI funnel, pit of PCC 1:2:4 type B-1/ RCC 1:2:4 type B-1, pit cover 75 mm thick reinforced with 6 mm dia bars @ 75 mm c/c both ways and with MS handle 12 mm dia connected to earth test point including testing Incl taking down old u/s one complete all as specified and directed.

S&F in replacement of miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP 240V, 10 KA 'B' curve, in the DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fix in repair Isolator SP 63 Amp, 240 Volts complete all as specified and directed.

S&F in replacement of miniature circuit breaker (MCB) of single poles and neutral (SPN) current carrying capacity 32 AMP 240V, 10 KA 'C' curve, in the DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing in repair 415V 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed. (i) TP 63 AMP

All as per item No 27 here-in-before but TPN 32 Amp

All as per item No 27 here-in-before but TPN/FP 100 AMP

S & F in repair 40 Amps RCBO A-type (TPN-4M) 240/415 Volt, 50 Hz , 10 KA short circuit capacity and breaking capacity 100 mA complete all as specified and directed.

Supply and fix in repair Sheet metal enclosures with socket plug top and MCB SP 20A, 240 volts, with a two pin and earth plug socket complete with one single MCB 20 Amps, 240 volts (for AC ) complete all as specified and directed.

Repair/Maint of day to day complaints (light /bell /ceiling fan / exhaust fan / switch and socket any type / geysers point etc.) by using following spare parts to rectify the defects and make serviceable with or without replacing spare parts and complete all as per the direction of Engr- in - charge. (Contractor shall provide appropriate technician and labour on daily basis. Fixing charges against Each item are included with that item Including taking down old u/s )

S&F in repair Switch piano, single pole one way 5 Amps 240 volt capacity flush type complete all as specified and directed.

S&F in repair Switch flush type , 05 Amp single pole , two way complete all as specified and directed.

S&F in repair 3 pin 5 Amps Socket outlet, flush type complete all as specified and directed.

S&F in repair Bell push piano type, single pole one way 5 Amps 240 volts capacity flush type complete all as specified and directed.

S &F in repair an electric bell ding dong AC 230 volt single pole complete all as specified and directed.

S&F in repair 5 pin, 5 Amps switch & socket combination flush type multipurpose 3 pin, 5 Amp flush type universal complete all as specified and directed.

Supply and fix in repair 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and directed.

Supply and fix in repair 3 pin 15 Amps switch socket combination, flush type universal multi purpose 2 in 1 type including PVC mounting box (3 pin 5 Amps and 15 Amps) complete all as specified and directed.

S&F in repair 5 pin, 5 Amps switch & socket combination flush type universal multipurpose 3 pin, 5 Amp flush type universal including PVC mounting box complete all as specified and directed.

S&F in repair Switch piano, single pole one way 15 Amps 240 volt capacity flush type complete all as specified and directed.

S&F in repair 6 pin 15 Amps Socket outlet , flush type complete all as specified and directed.

S&F in repair ceiling rose, 5 Amps surface type 240 volts bakelite three terminal as ordered complete all as specified and directed.

S&F in repair fan regulator electronic step type 230 volts switch type suitable for any type of ceiling fan sweep complete all as specified and directed.

S&F in repair fan regulator electronic step type 230 volts socket type suitable for any type of ceiling fan sweep complete all as specified and directed.

S & F in repair modular switch, one way, 6 Amps, 1 module, ISI marked complete all as specified and as directed.

S & F in repair modular socket, 6 Amps - 2/ 3 pin combined 2 module, ISI marked complete all as specified and as directed.

S & F in repair modular socket, 6/ 16 Amps - 2/ 3 pin combined 2 module, ISI marked complete all as specified and as directed.

S & F in repair modular switch, one way, 16/ 20 Amps, 1 module, ISI marked complete all as specified and as directed.

S & F in repair modular switch, two way, 6 Amps, 1 module, ISI marked complete all as specified and as directed.

S & F in repair modular bell push, 6 Amps, 1 module, ISI marked complete all as specified and as directed.

S & F in repair in replacement modular fan step regulator, 120 W - 1 module, ISI marked complete all as specified and as directed.

S & F in repair modular white cover plate with frame, 2 module, ISI marked complete all as specified and as directed.

All as per item No 54 here in before but, 3 module

All as per item No 54 here in before but, 4 module

All as per item No 54 here in before but, 6 module

All as per item No 54 here in before but, 8 module

All as per item No 54 here in before but, 12 module

Supply and fix in repair Angle Lamp holder PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed.

S&F in repair 9 to 12 watt (B22) ball type LED lamp complete all as specified and directed.

S&F in repair 9 watt screw type (E27) LED Lamp complete all as specified and directed.

S&F in repair Flexible PVC pipe of 25mm bore for passing the cable complete all as specified and directed.

S & F in replacement of LED batten fitting alongwith removable LED Tube 20 W, 230 Volt, wall /ceiling mounted with pahse and nreutral leads on single side of rod, complete all as specified and directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V complete all as specified and directed.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type complete all as specified and directed.

Supply and fixing in replacement round shape recess mounted cap 10/12/ watt 220 volts AC recessed type complete all as specified and directed.

Supply and fixing in replacement round shape recess mounted cap 22 watt 220 volts AC recessed type complete all as specified and directed.

S & F in replacement LED light fitting 1X10W bulkhead luminaires complete all as specified and directed.

S&F in replacement Polycarbonate retrofit LED tube rod of 20 W rod with phase and neutral leads on single side of rod complete all as specified and directed.

Taking down ceiling fan / exhaust fan / wall mounted fan / Exhaust/cabin fan of any sweep and refixing/hanging the fan after repairing/servicing duly cleaned and greased complete all as specified and directed. Note- Replacement of any parts will be measured and paid seperately.

Rewinding of exhaust fan/Ceiling fan any size mm sweep stator coil with super enameled copper winding wire of appropriate gauge / quantity of burnt stator coil complete all as specified and directed by Engineer in Charge

M&L in replacement of fan capacitor/condensor 2.5 - 4 MFD, 240 volt of ceiling fan/exhaust fan/wall mounted fan complete all as specified and directed.

Supply and fix in repair new rubber shackle with bolt nut split pin complete all as specified and directed.

Supply and fix in repair ceiling fan Rod 450/600mm long including nut/bolt complete all as specified and directed.

M&L Painting of any type fans ceiling/exhaust/cabin/wall/pedastal fans complete, in-situ with synthetic enamel paint with existing colur by using spraying gun including filling cavities with filler, one coat after cleaning all dust etc. complete against Ser item No 71.00 above.

S&F in repair of blades of ceiling/exhaust/wall/cabin/pedastal fans any type/size made of aluminium/ms or existing metal complete all as specified and directed.

Supply and fix in repair exhaust fan, made of sturdy Engineering plastic body complete with louvers shutter, voltage AC single Phase. 230V, 50 Hz of size 300m sweep with, RPM 1200, copper winding, complete all as specified and as directed by Engr-in-Charge

M&L in repair of louvers / shutter suitable for 300-450mm sweep exhaust fan complete all as specified and directed.

Supply and fixing in repair (BLDC) ceiling fans complete with blades down rods ,with remote control unit with battery 02 Nos and accessories 230 Volt 1200 mm sweep min air delivery 240 cu m/min with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M&L Taking down defective storage water heater of any capacity from buildings after disconnecting carefully water and electric connection, opening the bottom cover replacing the defective parts fixing the cover and refixing in original position reconnecting both water and electric connection and testing complete all as specified and directed. Notes :- Replacement of spares will be measured and paid for separately under respective items of the schedule here-in-after as supply only.

S & F in repair electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. vertical type, 5star rating complete all as specified and directed.

M&L for grouting in walls, making hole, fixing of suitable type of bolts, nuts and washers including installation of water heater of any capacity in suitable places, complete all as specified and directed.

M&L in repair Cable with copper conductor PVC round sheathed (flexible) industrial cable size 4sqmm, 3 core complete all as specified and directed.

S & F in repair heating element of existing type/capacity for 50/35/25/15 ltrs cap geyser complete all as specified and directed.

S & F in repair of thermostat of existing type/capacity for 50/35/25/15 ltrs cap geyser complete all as specified and directed.

S & F in repairs of Metal clad plug and socket existing type/capacity for 50/35/25/15 ltrs cap geyser complete all as specified and directed.

S & F in repair PVC connections of 15 mm dia suitable for hot & cold water 450 /600mm long with brass nuts and rubber washers complete all as specified and directed.

M&L for fixing in replacement safety pressure valve of size 15 mm dia, ISI marked for geysers, complete all as specified and directed by Engineer-in-charge.

S&F in replacement PVC wire 1.5 sqmm 3 Core PVC insulated cable copper drawn through PVC conduit from looping box to street light fitting terminal complete all as specified and directed.

S & F in repair Bib taps, cast copper alloy of 15 mm bore dia with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in replacement of plug top suitable for any type capacity of water heater complete all as specified and directed.

S& F in replacment Weather proof flat twin core auminium cable 1.5 sqmm complete all as specified and directed.

S&F in replacment Weather proof flat twin core auminium cable 2.5 sqmm complete all as specified and directed.

Supply and fixing in repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing with IP 65/66 protection complete all as specified and directed.

All as per item No 95.00 here in before but 70/72 watt

Supply and fixing in repair LED flood light 70 watt 230 V AC outdoor type with thermal anagement in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

All as per item No 97.00 here in before but 100 watt

All as per item No 97.00 here in before but 120 watt

All as per item No 97.00 here in before but 180 watt

All as per item No 97.00 here in before but 200 watt

Supply and fixing in repair post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

All as per item No 102.00 here in before but 40 watt.

Supply and fixing in repair Copper Ballast HPSV/MH 250-400 watts as per existing type and model for street light/ search light complete all as specified and directed.

Supply and fixing in repair Lamp HPSV/MH 250-400 watts as per existing type and model for street light/ search light complete all as specified and directed.

Supply and fixing in repair Igniter electronic 250-400 watts for HPSV/MH lamp as per existing type and model for street light/ search light complete all as specified and directed.

Supply and fixing in repair Porcelain Holder for HPSV/MH 250-400 watts as per existing type and model for street light/ search light complete all as specified and directed.

Supply and fix in repair bracket for LED street light fittings of Single Arm 1meter Bracket of 1Mtr long at site made out of GI pipe light grade 50 mm dia for fixing to street light fittings on the poles not less than 1.5 meter long complete all as specified and directed.

M&L in replacement of contactor ML 1.5, 3 pole, 415 V complete all as specified and directed.

S&F in replacement of looping box (enclosures) of size 280 x 170 x 130 mm made of PVC comprising of 02 Nos aluminium bus bar 100 Amps rating fixed on porcelain insulators, earthing terminal and one MCB SP 6/16 Amp including MS bracket, nut and bolts complete all as specified and directed.

S&F in repair radium sticker of red colour, water proof 80 mm wide on around the poles complete all as specified and directed.

M&L for preparation of old steel surfaces with one coat of spray painting of feeder pillar (Kiosk) externally with synthetic enamel paint of approved tint complete all as specified and directed.

M&L for painting steel tubular poles 9/11m height including brackets and cross-arms if any and applying one coat of synthetic enamel paint of existing colour complete Incl write of MES NO complete all as specified and directed.

Supply and laying or fixing in repair XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cable (H/D) earthed cable aluminium conductor, 1100 volts grade with standed complete all as specified and directed for 10 sqmm, 4 core nominal cross section in service connections complete all as specified and directed.

All as per item No 114.00 here in before but of cable size 16 Sqmm , 4 core

M&L for excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc. and getting out soft/ loose soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm complete all as specified and directed.

Removing excavated materials not exceeding 50 mtrs away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and fixing in repair DWC High density poythelyne (HDPE) pipes of pressure rating 6kgf/ sqm of size 40 mm for cable protection laid in trenches complete all as specified and directed.

Supply and Fix in repair Cable with copper conductor PVC round sheathed (flexible) industrial cable 2.5 sqmm 3 core complete all as specified and directed.

S&F in repair/replacement of Street light / flood light driver (circuit) and LED Pad, Surg arrester suitable for 35/70/90 watt LED Street light fittings complete all as specified and directed.

Supply & Fixing in replacement of NATURE SWITCH-02 (sensor along with pre-dawn switching off timer, 4-8 hrs) & NS-INDOOR (sensor for Lux level based switching of outdoor/semi-indoor lights) complete all as specified and directed. Make:- Nature switch or equivalent as approved by GE.

S&F in repairs Timer Switch Astronomical type 215 volts single phase of 32 Amps rating with TP contactor incl one Toggle switch for Auto, off and manual function and inmcomming 40 Amps MCB SPN internaly pre wired complete and fitted inside steel enclosure complete all as per site requirement and directed by Engr - in - Charge.

S&F in repairs Magnetic Contactor 3 pole 40 A , 240 Volts for street light timer. complete all as specified and as directed. Make : Cat No : CS94190BOOO, MNX 40 or equivalent as approved by GE

S&F in replacemetn of IP-65 aviation obstruction light, die cast aluminium housing, red coloured polycarbonate dome and Power consumption 5.8 Watt operating temperature 10-60 degree C LED type with lamp and connection complete all as specified and directed.

Supply and fix in repair electronic meters temper proof LCD display with polycarbonate cover Single phase 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed.

All as per item No 126 here in before but 3 Phase, 415 volt

S & F in replacement garden light 8 W LED height 30 inches, suitable for architectural outdoor light with providing PCC 1:3:6 type C1 foundation & earth work complete so as to fix it properly complete all as specified and directed by Engr in charge. Note : Earth work and PCC will be measured and paid separately against BOQ item.

S&F in repair Garden Light 10W height 60 inches Cone series acts as an imposing street furniture. The elegant yet minimalistic design acts a silent observer, IP 65 and giving light, diffuser at the upper portion adds functional value into landscape environment complete all as specified and directed.

Disconnecting and taking out 3 Phase forward and reverse motor of capacity 1.0/1.5 HP motor from existing highmast tower enclosure including rewinding with super enameled copper wire, replacement of neck rings,sleeves bushing , seal, including servicing, testing & commissioning at same place complete all as specified and directed.

Supply and fixing in replacement of Programmable Time Switch 24 Hour (SST - 15 min) outdoor/semi-indoor lights) for high mast tower controller panel same as per the sample in the existing High mast panel complete all as specified and directed. Make:- Nature switch or equivalent as approved by GE.

Supply & fix in repair bus bar chamber of raing 100 Amps TPN factory made dust and vermin proof including bus bar of rectangular cross section of copper strip supported on cast epox insulator at suitable interval heat shrinkable sleeves with powder colour code 01 set of 04 strip of complete with grouting in wall with suitable FI strip bend to shape with PCC work for holding enclouse complete all as specified and directed. Make: Havells, cat part No IHBB010004, 4 way or equivalent as approved by GE.

M&L for providing PCC 1:4:8, type D-2, using 40 mm graded stone aggregate as in foundation for erection of poles/ stay assembly complete all as specified and as directed by Engineer-in-charge.

M&L for providing PCC 1:3:6, type C-1 using 20 mm graded stone aggregate as in coping to pole etc., including necessary form work complete all as specified and as directed by Engineer-in-charge.

M & L for boring of holes up to 80 mm dia under road pavement, hard standing, etc by trench- less technology using ultra sound technique complete all as directed by Engineer-in- charge. Note:- Pipe for protection of cable shall be measured and paid separately.

Supply and fixing in repair GI pipe Light grade 50 mm bore (ISI marked) laid in trenches/ path /road crossings/ fixed to poles/ceiling/ along walls/ path /drain/floors with and including all necessary clamps, nuts, bolts, washers etc and all fittings as required, complete all as specified and as directed by the Engineer-in-Charge. (Note:- Necessary excavation and earth work shall be measured and paid for separately)

All as per item No 136 here in before but 80 mm bore.

SNEH TRADERS (BID ID -3478915)

Haritwal traders (BID ID -3477366)

K K Construction Co (BID ID -3474350)

Abhishek Enterprises (BID ID -3479265)

Shree Builders (BID ID -3476745)

M.A. MUNSHI AND CO. (BID ID -3474172)