Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-Finance DISTT KANGRA HP | KANGRA | HIMACHAL PRADESH | 176001 | ₹2.3 L | L1 | Accepted-Finance Bidder is found L1 |
| 2 | L2₹2.3 L+₹3,081.50 (1.36%)Rejected-Finance | ₹2.3 L+₹3,081.50 (1.36%) | L2 | Rejected-Finance Bidder is found L2 |
| 3 | L3₹2.9 L+₹61,924 (27.3%)Rejected-Finance | ₹2.9 L+₹61,924 (27.3%) | L3 | Rejected-Finance Bidder s found L3 |
| Sl No | Description | Qty | Unit | NITIN JAMWAL L2 | RAJNISH KUMAR L3 | Sanjay Kumar L1 |
|---|---|---|---|---|---|---|
| 1.00 | Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge including entire carriage of material within all leads & lifts. | 42.75 | Per running metre | 300 ₹12,825 Lowest | 450 ₹19,237.5 | 350 ₹14,962.5 |
| 2.00 | Providing and fixing to existing door frames, 30mm thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x19mm for styles and 15mmx15mm for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tappred in 45 degree angle on either side forming style and 5mm thick, 95mm wide, PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm thick, 20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm size with necessary screws etc complete. including entire carriage of material within all leads & lifts. | 52.5 | Per Square metre | 2,900 ₹1,52,250 Lowest | 3,600 ₹1,89,000 | 3,200 ₹1,68,000 |
| 3.00 | Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within 20 metres lead.Not exceeding 3 sqm in area. including entire carriage of material within all leads & lifts. | 35 | Each | 150 ₹5,250 | 300 ₹10,500 | 50 ₹1,750 Lowest |
| 4.00 | Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete including entire carriage of material within all leads & lifts.(Pilot/Sheel make) 125mm. | 70 | Each | 80 ₹5,600 | 100 ₹7,000 | 70 ₹4,900 Lowest |
| 5.00 | Providing and fixing aluminium tower bolts (berrel type) anodized transparent or dyed to required colour & shade with necessary screws etc complete including entire carriage of material within all lead, & lifts. (Pilot/Sheel make ) 200x10mm. | 70 | Each | 70 ₹4,900 Lowest | 100 ₹7,000 | 80 ₹5,600 |
| 6.00 | Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within all Lead with:-Cement Mortar 1:6 (1 Cement : 6 Sand) including entire carriage of material within all leads & lifts. | 7.2 | Per Square metre | 300 ₹2,160 | 350 ₹2,520 | 250 ₹1,800 Lowest |
| 7.00 | Dismantling tiled/Kota stone floors laid in mortar upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within any lead including entire carriage of materials within all leads and lifts. For thickness of tiles upto 25mm | 14.4 | Per square metre | 800 ₹11,520 | 1,000 ₹14,400 | 50 ₹720 Lowest |
| 8.00 | Providing and laying White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement including entire carriage of material within all lead, & lifts. (Nitco/ Kajaria/ Somany make) | 14.4 | Per square metre | 1,250 ₹18,000 | 1,400 ₹20,160 | 950 ₹13,680 Lowest |
| 9.00 | Providing and fixing PVC wall panelling including beeding, corners and necessary fitting as per direction of Engineer in charge. The rate is inclusive for carriage of material with in all leads and other incidentals.(8mm thick) HD including entire carriage of material within all leads & lifts. | 15.3 | Per square metre | 1,150 ₹17,595 | 1,250 ₹19,125 | 1,020 ₹15,606 Lowest |
Tender Value
₹1.7 L
EMD Value
₹3,410
Closing Date
15 Dec 2025, 5:00 pmClosed
Executive Engineer (D)
Executive Engineer (D) CSKHPKV Palampur
Repair/Renovation of Monal Hostel COVAS, CSKHPKV, Palampur.(SH Providing and fixing PVC door shutter in Toilet blocks UG, PG wing.)
2025_HPKV_122502_1
EE CSKHPKV NIT No. 4443-48 dt 28/11/2025
Open Tender
Civil Works
Item Rate
CSKHPKV, Palampur
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
EE(D) CSKHPKV , Palampur
₹3,410
26 Dec 2025
6 Dec 2025
16 Dec 2025
6 Dec 2025
15 Dec 2025
6 Dec 2025
Amount
Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge including entire carriage of material within all leads & lifts.
Providing and fixing to existing door frames, 30mm thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x19mm for styles and 15mmx15mm for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC "C" channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tappred in 45 degree angle on either side forming style and 5mm thick, 95mm wide, PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm thick, 20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails, joints mitred and jointed with solvent cement adhesive i/c fixing of PVC shutter with existing frame with M.S. butt hinges 100x50x1.90mm size with necessary screws etc complete. including entire carriage of material within all leads & lifts.
Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within 20 metres lead.Not exceeding 3 sqm in area. including entire carriage of material within all leads & lifts.
Providing and fixing aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete including entire carriage of material within all leads & lifts.(Pilot/Sheel make) 125mm.
Providing and fixing aluminium tower bolts (berrel type) anodized transparent or dyed to required colour & shade with necessary screws etc complete including entire carriage of material within all lead, & lifts. (Pilot/Sheel make ) 200x10mm.
Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within all Lead with:-Cement Mortar 1:6 (1 Cement : 6 Sand) including entire carriage of material within all leads & lifts.
Dismantling tiled/Kota stone floors laid in mortar upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within any lead including entire carriage of materials within all leads and lifts. For thickness of tiles upto 25mm
Providing and laying White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement including entire carriage of material within all lead, & lifts. (Nitco/ Kajaria/ Somany make)
Providing and fixing PVC wall panelling including beeding, corners and necessary fitting as per direction of Engineer in charge. The rate is inclusive for carriage of material with in all leads and other incidentals.(8mm thick) HD including entire carriage of material within all leads & lifts.
NITIN JAMWAL (BID ID -594044)
RAJNISH KUMAR (BID ID -594021)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
SBD.pdf
Tender Documents • 20.61 MB
BOQ_179737.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .