FSL

Providing and applying gold line exterior texture of average 2 to 3 mm thick over plastered surface, even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, sand the surface, clean & wipeoff loose dust, applying textue paint filler by putty knife / muslin pad, air dry for 2-3 hours for the suface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for external walls of all floors.

PAINTING TO NEW IRON WORK TWO COATS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND AND SHADE OVER ONE COAT OF RED OXIDE PRIMER COAT (TOTAL 3 COATS) INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL INCIDENTAL, OPERATIONAL & LABOUR CHARGES FOR PREPARING AND CLEANING THE SURFACE OF DIRT WITH SOAP AND BRUSHES, INCLUDING PUTTY, ETC., COMPLETE FOR FINISHED ITEM OF WORK. (APSS NO.1201, 1207, 1212).

PROVIDING AND FIXING FACTORY MADE UPVC WHITE COLOUR SLIDING GLAZED WINDOW UPTO 1.50 M IN HEIGHT DIMENSION TWO TRACK TWO PANELS SLIDING WINDOW MADE OF (BIG SERIES) FRAME 67 X 50 MM & SASH 46 X 62 MM BOTH HAVING WALL THICKNESS OF 2.3 ± 0.2 MM AND SINGLE GLAZING BEAD / DOUBLE GLAZING BEAD OF APPROPRIATE DIMENSION . (AREA OF WINDOW ABOVE 1.75 SQM UPTO 2.50 SQM).COMPRISING OF UPVC MULTI-CHAMBEREDFRAME WITH IN-BUILT ROLLER TRACK AND SASH EXTRUDED PROFILES DULY REINFORCEDWITH 1.60 ± 0.2 MM THICK GALVANIZED MILD STEEL SECTION MADE FROM ROLLFORMING PROCESS OF REQUIRED LENGTH (SHAPE & SIZE ACCORDING TO UPVCPROFILE), APPROPRIATE DIMENSION OF UPVC EXTRUDED GLAZING BEADS ANDUPVC EXTRUDED INTERLOCKS, EPDM GASKET, WOOL PILE, ZINC ALLOY (WHITEPOWDER COATED) TOUCH LOCKS WITH HOOK, ZINC ALLOY BODY WITH SINGLE NYLONROLLERS (WEIGHT BEARING CAPACITY TO BE 40 KG), G.I FASTENERS 100 X 8 MMSIZE FOR FIXING FRAME TO FINISHED WALL AND NECESSARY STAINLESS STEEL SCREWSETC. PROFILE OF FRAME & SASH SHALL BE MITRED CUT AND FUSION WELDED AT ALLCORNERS, INCLUDING DRILLING OF HOLES FOR FIXING HARDWARE'S AND DRAINAGE OFWATER ETC. AFTER FIXING FRAME THE GAP BETWEEN FRAME AND ADJACENT FINISHEDWALL SHALL BE FILLED WITH WEATHER PROOF SILICON SEALENT OVER BACKER ROD OFREQUIRED SIZE AND OF APPROVED QUALITY, ALL COMPLETE AS PER APPROVED DRAWING& DIRECTION OF ENGINEER-IN-CHARGE INCLUSIVE OF COST OF SINGLE / DOUBLE GLASS PANES, WIRE MESH AND SILICON SEALENT . NOTE: FOR UPVC FRAME AND SASH EXTRUDED PROFILES MINUS 5% TOLERANCEIN DIMENSION I.E. IN DEPTH & WIDTH OF PROFILE SHALL BE ACCEPTABLE.VARIATION IN PROFILE DIMENSION IN HIGHER SIDE SHALL BE ACCEPTED. BUT NO EXTRA PAYMENT ON THIS ACCOUNT SHALL BE MADE.

Providing and fixing factory made uPVC white colour casement/Casementcum fixed glazed door comprising of uPVC multi-chambered frame, sashand mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll formingprocess of required length (shape & size according to Upvc profile),uPVC extruded glazing beads of appropriate dimension,EPDMgasket,zinc alloy (white powder coated) 3D hinges and one handle oneach side of panels along with zinc plated mild steel multi pointlockinghavingtransmission gear, cylinder with keeps and one side key, G.Ifasteners100 x 8 mm size for fixing frame to finished wall and ecessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut andfusion welded at all corners, mullion (if required) shall be also fusionweldedincluding drilling of holes for fixing hardware's and drainage ofwater etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required sizeand of approved quality, all complete as per approved drawing & directionof Engineer-in-Charge inclusive of cost of Single / double glass panes and silicon sealent . Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerance in dimension i.e. in depth & width of profile shall be cceptable.Variation in profile dimension in higher side shall be acceptedbut no extra payment on this account shall be made.Casement door with 3D hinges made of (big series) frame67x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00sqm).

Supply of 16 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes: Universal / CCI / Unicab/Polycab

Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Providing independent earthing for Important equipment with 80mm Nominal Bore C.I.Earth Pipe of 3 Mtrs Length filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through C.I pipe flange with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply and fixing of 40mm dia GI pipe ISI mark with fitting suitable for encasing the cable along pole including cost and conveyance of all materials etc., complete for finished item of work.

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.

Supply and errecting tripple pole nuetral sheet metal / iron clad switch approved make rewirable type 415/500V 32A with conduit entry errected on an angle iron frame covered with 3mm thick hylam sheet cover etc, complete including cost and conveyance of materials and labour chargers etc, complete. Makes: HPL / Havells / Standard / Indo Asian/Benlo

EARTH WORK EXCAVATION FOR FOUNDATIONS AND DEPOSITING ON BANK, FOR ALL LIFTS AND WITH AN INITIAL LEAD OF 10M INCLUDING ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES SUCH AS SHORING, SHEETING, PLANKING, STRUTTING, ETC. COMPLETE FOR FINISHED ITEM OF WORK EXCLUDING DEWATERING CHARGES ETC AS PER SS - 20 B FOR STIFF BLOCK COTTON SOIL , HARD RED EARTH, MURRAM, ORDINARY GRAVEL - MANUAL MEANS UP TO 3M DEPTH - FOR HDPE PIPE LINE (APSS 308).

RE-FILLING WITH EXCAVATED EARTH IN LAYERS NOT EXCEEDING 15 CM THICK, CONSOLIDATING EACH DEPOSITED LAYER BY WATERING AND RAMMING INCLUDING COST AND CONVEYANCE OF WATER TO WORK SITE AND ALL INCIDENTAL, OPERATIONAL, LABOUR CHARGES BUT EXCLUDING SEIGNIORAGE CHARGES ETC., COMPLETE FOR FINISHED ITEM OF WORK. IN TRENCHES, SIDES OF FOUNDATIONS AND BASEMENT. (APSS NO. 309 & 310)

S & F 50 mm Nominal Bore GI pipe Light Grade properties & weight as per IS 1239 with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches complete except for GI bends union and GI connectors with checkout and socket Tata make only. BMW-F.91 SSR 2022-23

Supply, & Delivery of 40MM OUTER DIA HDPE Pipes conforming to IS 4984 - 2016 including transportation INCLUSIVE OF COST AND CONVEYANCE OF ALL MATERIALS TO SITE, ALL LABOUR CHARGES, INCIDENTAL CHARGES, COST OF ALL CONSUMABLES ETC. AND FIXING CHARGES COMPLETE FOR FINISHED ITEM OF WORK.MAT 07358 SSR 2022-23

SUPPLY OF 40MM PPR BALL VALVE CONFIRMING TO DIN STANDARDS 8077/8092INCLUDING COST AND CONVEYANCE OF ALLS MATERIALS TO SITE ETC., COMPLETE

Supply and Transportation of 1.5 HP Piston ,motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Speed :<2000 RPM Waranty 1 Year voltage :220 V Phase Power 1Hp motor Pump shall be suitable for delivery head and discharge etc complete makes asper list of recommended brands as cateogry II brands as category II

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor up to 1.5 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter,indicator lamps, MCB , on/off switch including supplyand fixing of DOL starter.of complete., Makes : As per list of recommended brands. ELEC-5.4.16

Supply of 2.5 Sqmm PVC insulated and sheathed FRLS copper round cable for voltage up to 1100V as per IS 694/1990. Makes: Finolex / RR Kable / Havells/KEI/ Polycab/ Orbit/Gloster 3 core 2.5 Sqmm