SPL REPAIR TO CERTAIN ROADS IN 810 CETC PURKAZI UNDER GE ROORKEE

M & L for repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in road, paths etc cutting around edges to at least 25mm in depth, but making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings).depth of potholes n exc 30 mm complete all as specified and directed.

M&L for prepration of existing black top surfaces by brushing with wire brushes for removing caked mud, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust or dirt etc. and applying evenly a priming/tack coat with bituminous primer (using paving bitumen) at 5 kg per 10 sqm complete all as specified and as directed.

M&L for Bituminous premixed semi-dense asphaltic 30 mm thick (consolidated thickness) stone chipping mixed with 5.5 % of binder content paving bitumen ( VG-30 viscocity grade mixed in hot mix plant, transported to site on tippers and laid with a hydrostatic paver finisher with sensor controln to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction, complete all as specified and directed. Note :-(a) 05 Nos of core cutter test to be carried out by contractor on his own cost after 07 days from date of laying of SDAC at location directed by Engr in Charge and test report to be submitted before processing RAR/Payment (CTL/IIT Roorkee?any Govt Institute as approved by GE. (b) The unit rated are worked out on the basis of binder content of 5.5% by total mix. Any additition/deduction in the actual binder content used, the rate shall be adjusted as per given in SSR-II)

M&L for Premix bituminous, macadam using paving bitumen 4% (by weight of total mix) binder content (VG-30) viscocity grade and pentitration laid / rolled and compacted to required gradient and chamber (consolidated thickness n. exc. 75 mm) with 8 to 10 tonnes power roller complete all as specifified and directed. Note :-(a) 05 Nos of core cutter test to be carried out by contractor on his own cost before laying of SDAC on BM surface at location directed by Engr in Charge and test report to be submitted before processing RAR/Payment (CTL/IIT Roorkee?any Govt Institute as approved by GE. (b) The unit rated are worked out on the basis of binder content of 4% by total mix. Any additition/deduction in the actual binder content used, the rate shall be adjusted as per given in SSR-II)

S & F in repair metal delineator 1100 mm long X 100 mm x20mm MS Rectangular (medium grade) powder coated and pasted with twin colour reflective tape strips embedded 200 mm below ground level (approx 2-3 Kg weight) including excavation and PCC M15(Nominal Mix) with using 20 mm graded stone aggregate in foundation of size 200 mm X 200 mm X 200 mm and making good surface completeall as specifified and directed. .

S&F in repair for cat eye plastic body having two ways reflector with abrasion resistant lens including fixing arrengement as per manufactures instructions etc complete all as specified and directed.

S&F in repairs solar cat eye aluminium alloy shall )100% water proofing design according to 65) of size 125 x125x25mm (Shank 65mm) of high efficency mono rystafie solar panel 2.4V/0.3 watt one NI-ed recharable battery (1.2V/1600MA) Consisiting of super bright LED with 10000 to 18000 mcd in red/yellow/white colour complete as per manufactures instruction etc all as specified and directed .

S & F in repairs of speed bumps breakers made up of ABS plastic PU material rubber and black & yellow colour of size 500mm x 350mm and 74mm with both side aluminium plated reflector, antiskid UV resistence moisture and temperature including fixing using anchor bolts and epoxy mortar grout complete all as specified and directed.

S & F in repairs rumbler strips of made up of ABS plastic PU material rubber and black & yellow colour of size 500mm x 100mm and 15mm with aluminium plated reflector, antiskid UV resistence moisture and temperature including fixing using anchor bolts and epoxy mortar grout complete all as specified and directed.

Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.