Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.0 LAdmitted-Finance | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | KURIAKOSE K P L1 |
|---|---|---|---|---|
| 1.00Road works | ||||
| 1.01 | OD129399/2025-2026 Labour Engaged for Coolie | 175 | Day | 1,180 ₹2,06,500 Lowest |
| 1.02 | 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses
etc., including cutting, hoisting, fixing position and applying a priming coat of
approved steel primer, including welding and bolted with special shaped washers etc.
complete.Hot finished welded type tubes | 325 | kg | 212 ₹68,900 Lowest |
| 1.03 | 10.25.1 Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting,
fixing in position and applying a priming coat of approved steel primer using
structural steel etc. as required.In stringers, treads,landings etc. of stair cases,
including use of chequered plate wherever required, all complete | 4 | kg | 140 ₹560 Lowest |
| 1.04 | 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of
corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated
thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade,
5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18
microns. Sheet should have protective guard film of 25 microns minimum to avoid
scratches during transportation and should be supplied in single length upto 12 metre
or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self
tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in
horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and
trusses and including cutting to size and shape wherever required. | 50.96 | sqm | 915 ₹46,628.4 Lowest |
| 1.05 | 16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver
block of M - 30 grade made by block making machine with strong vibratory
compaction, of approved size, design & shape, laid in required colour and
pattern over and including 50 mm thick compacted bed of coarse sand, filling the
joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 21.85 | sqm | 1,300 ₹28,405 Lowest |
| 1.06 | 2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means
in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),
including dressing of sides and ramming of bottoms, lift up to 1.5 m, including
getting out the excavated soil and disposal of surplus excavated soil as directed,
within a lead of 50 m.All kinds of soil | 1.73 | cum | 390 ₹673.92 Lowest |
| 1.07 | 50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or
nearest available size confirming to IS 2185 part I of 1979 for super structure up to
floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc
complete | 1.6 | cum | 8,480 ₹13,584.96 Lowest |
| 1.08 | 13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 10.26 | sqm | 400 ₹4,104 Lowest |
| 1.09 | 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade:Two or more coats on new work | 14 | sqm | 180 ₹2,520 Lowest |
Tender Value
Refer Docs
EMD Value
₹19,225
Closing Date
30 Oct 2025, 5:00 pmClosed
DFO Timber Sales Division Kottayam
DFO Timber Sales Division SH Mount PO Kottayam-686006
Estimate for the cost of gardening landscaping beautification,setting up of oxygen park erecting martyrs Column,etc and overall upkeeping of buildings and compount area in Aranyabhavan Forest Complex Parampuzha Kottayam during 25-26
2025_FD_811410_1
KFDDO/51270/2025-TS1
Open Tender
Civil Works - Others
Item Rate
30 days
Parampuzha
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,538
Yes
₹19,225
Yes
4 Nov 2025
17 Oct 2025
31 Oct 2025
17 Oct 2025
30 Oct 2025
17 Oct 2025
Amount
Road works
OD129399/2025-2026 Labour Engaged for Coolie
10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
10.25.1 Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete
12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
50.6.2.2 Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete
13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
GARDENING OD147014/2025-2026 Supplying Bone meal
OD147015/2025-2026 Design and layout charges and total labour charges (application of SAF on plants,mixing farmyard manure,coirpith compost and materials site as shown above,ground preparation & planting, shifting,pebbles arrangement etc.
OD147016/2025-2026 Supplying Coirpith compost –(25 kg pack)
OD147017/2025-2026 Supplying Neem cake
OD147018/2025-2026 Supplying Groundnut cake
OD147037/2025-2026 Peanut flowering Bushing plant – cover ( Instead of grass garden ground big area)
OD147020/2025-2026 Supplying and Planting Thailand Chethi red flowering plant ( two and a half feet height)
OD147021/2025-2026 Supplying and planting Big peace lily flowering plant ( two feet height)
OD147022/2025-2026 Supplying and planting Spider lily flowering plant(one and a half feet height)
OD147023/2025-2026 Supplying and planting Nandyarvattam flowering plant bushing ( one feet height)
OD147024/2025-2026 Supplying and planting Pentanus Plant (one feet height)
OD147025/2025-2026 Supplying and planting Pentanus big leaf plant (two and a half feet height)
OD147026/2025-2026 Supplying and planting Golden Bamboo ( five feet height)
OD147027/2025-2026 Supplying and planting Eugenia bush plant (three feet height)
OD147028/2025-2026 Suppling and planting Kufiya flowering plant (half feet height bushing)
OD147029/2025-2026 Supplying and planting Peace lily flowering plant (one and a half feet height)
OD147030/2025-2026 Supplying and planting Red palm plant (Seven feet height)
OD147031/2025-2026 Supplying and planting Heliconia hybrid red flowering plant. (three feet height)
OD147032/2025-2026 Supplying and planting Jatropha flowering plants. (two feet height)
OD147033/2025-2026 Supply and Planting Lantana flowering plants bushing (one feet height)
OD147034/2025-2026 Supplying and planting Allamanda flowering plants. Big area ( two feet height bush plant)
OD147035/2025-2026 Supplying and planting Ribbon Grass Bushing plant. Box area covering all. ( one feet height)
OD147036/2025-2026 Suppling and planting China Dall Big Size Plant&Pot(five feet height)
Bidder Name
KURIAKOSE K P
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.54 MB
Tendernotice_2.pdf
PDF • 0.27 MB
Tendernotice_3.pdf
PDF • 0.23 MB
Tendernotice_4.pdf
PDF • 0.22 MB
Tendernotice_5.pdf
PDF • 1.71 MB
BOQ_1354954.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .