Sardar Sarovar (Narmada) Project

Excavation in all sort of strata and formations incl.

depositing the unuseful excavated stuff as and

where directed incl sorting 1 and stacking useful

materials as directed upto 30 mt lead etc.

1 complete incl. dewatering. 257.85 Cum

(Depth 0 TO 3.0 mt )

(For all type canal & foundation trenches of C.D.

A) IN OVERBURDEN INCL. HARD MURRUM.

Prov. and Laying in position nominal mix concrete

using cement, sand and crushed aggregate by

mass and machine mix for R.C.C/CC work

2 including necessary formworks centering 619.92 Cum

scaffolding compaction by vibrator,curing as

directed with all lead & lift etc complete

A) Concrete grade 1:1.5:3 and MSA-20mm

Providing, laying, spreading and compacting layer

of Quarry Spall having CBR not less than 15%, as

3 subgrade for the designed pavement and 637.95 Cum

conforming to Clause 305 of MoRT&H

Specifications.

Supplying of well graded crushed stone

aggregates, chippings etc. of hard stone of

4(a) following nominal size free of disintegrated pieces 956.93 Cum

deletarious and oraganic mater for Granular Sub

Base Material as per MORTH specification.

Spreading the stone aggregate for rolling and

W.B.M. including filling the interstices to required

camber and gradient (excluding spreading of

Blindage)(iii) 25mm to 50mm size crushed stone

brought from out side borrow area or from

5 excavated useful material incl. watering ramming, 2504.48 Cum

Compaction with pneumatic temping and all lead

and lift etc complete.

Box cutting the road surface to proper slope and

camber for making a base for road work including

removing the excavated stuff and depositing on

the road side slope as directed upto 50Mt.lead

Supplying and fixing road sign board of M.S. plates

and angle iron including painting, lettering etc.

7 complete including fixing in C.C. 1:4:8 with 24.00 Nos

necessary excavation etc. complete as per I.R.C.

type design.(ii) Reflective type.

Rolling and consolidating water bound macadam

(except laterite and Kankar) including watering

not exceeding 150mm thickness (Main layer

including binding materials ) including filling in

depressions which occur during the process.(A)

With power roller exceeding 8 tonne and not

exceeding 12 tone.

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work at…...................... %above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………%below Add………%Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item(with Quantity Unit Rate Amount

No brief specification and

reference to book of In In

specifications) figures Words

(A)Total Tendered Amount

(B)Rebate on above tendered amount (if any) % (in figure)

(in words)

(C)NetTendered Amount(A-B) (in figure) ………………………………

(in words)

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all P.C.C./R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as

per vernacular office letter no. 04 of 2024, Dt. 20/01/2024 of The Chief Engineer, Quality

Control (SSNNL) as stated in S.O.R. therefore in P.C.C./R.C.C. items where there is a change

as per Nominal mix the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate (i.e. 5448.53 Rs / MT for OPC) in all the