Kerala

AOC

Works

Civil Works - Others

MANKULAM GP-MAINTENANCE OF ANAKKULAM ANGANWADI NO.79,WARD NO.1

Local Self Government Department

Mankulam GP | Idukki, Kerala

Amount: ₹2.5 LCloses: 24 Mar 2025Closed

Timeline

Published15 Mar 2025
Closed24 Mar 2025
Awarded5 Jun 2026

Bids

Item Rate

1 Bid5 Jun 2026

#	Company	Amount	Rank	Status
1	ABRAHAM ITTIYAVIRA L1₹2.4 LAccepted-AOC KERALA	₹2.4 L	L1	Accepted-AOC Accept

BoQ Comparative

Line Items (13)

Sl No	Description	Qty	Unit	ABRAHAM ITTIYAVIRA L1
1.00Building Maintanance
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	285.18	kg	188.09 ₹53,638.57 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	102.45	kg	150.9 ₹15,459.71 Lowest
1.00	OD233211/2024-2025:DSR 51.20 Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	86.67	sqm	582.59 ₹50,493.08 Lowest
1.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)	0.38	cum	7,915.22 ₹2,991.95 Lowest
1.00	50.9.2.3:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer in -charge. using Vengai wood	1.39	sqm	2,544.77 ₹3,532.14 Lowest
1.01	21.10:Providing and fixing double glazed hermetically sealed glazing in aluminium window, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete.	5.45	sqm	4,553.48 ₹24,793.7 Lowest
1.01	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	117.5	sqm	321.96 ₹37,830.3 Lowest
1.01	13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)	56.58	sqm	265.05 ₹14,995.2 Lowest
1.01	13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)	247.28	sqm	106.36 ₹26,300.17 Lowest

Tender Value

₹2.5 L

EMD Value

₹6,346

Closing Date

24 Mar 2025, 2:00 pmClosed

Tender Inviting Organisation

Name

ASSISTANT ENGINEER

Address

LID AND EW SECTION,MANKULAM GP

Work Description

MANKULAM GP-MAINTENANCE OF ANAKKULAM ANGANWADI NO.79,WARD NO.1

Tender Information

Tender ID

2025_LSGD_728964_28

Reference Number

02/2024/AE/LIDEW/MKLM

Tender Type

Open Tender

Product Category

Civil Works - Others

Form of Contract

Item Rate

Period of Work

30 days

Location

Mankulam GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

11 documents required · 11 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredBid security remittence (.pdf)

RequiredBid submission letter as per item no-1 Part-VI (.pdf)

RequiredIntegrity pact certificate as per item no-3 PartVI (.pdf)

RequiredPreliminary agreement as per item no-2 PartVI (.pdf)

RequiredRequisition for e-payment as per item no-6 PartVI (.pdf)

RequiredAffidavit as per item no-4 Part- VI (.pdf)

RequiredBidder valid registration certificate (.pdf)

RequiredBid documents with NIT (.pdf)

RequiredBid submission fee remittence (.pdf)

RequiredGST Document (.pdf)

Fee & Financial Details

Tender Fee Amount

₹560

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹6,346

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

5 Jun 2026

Published

15 Mar 2025

Bid Opening

26 Mar 2025

Download Starts

15 Mar 2025

Download Ends

24 Mar 2025

Submission Starts

15 Mar 2025

Clarification Period

15 Mar 2025 - 24 Mar 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

ABRAHAM ITTIYAVIRA

L1₹2.4 LAccepted-AOC

KERALA

Sl No	Description	Qty	Unit	ABRAHAM ITTIYAVIRA L1
1.00Building Maintanance
1.00	50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	285.18	kg	188.09 ₹53,638.57 Lowest
1.00	50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete	102.45	kg	150.9 ₹15,459.71 Lowest
1.00	OD233211/2024-2025:DSR 51.20 Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	86.67	sqm	582.59 ₹50,493.08 Lowest
1.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)	0.38	cum	7,915.22 ₹2,991.95 Lowest
1.00	50.9.2.3:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer in -charge. using Vengai wood	1.39	sqm	2,544.77 ₹3,532.14 Lowest
1.01	21.10:Providing and fixing double glazed hermetically sealed glazing in aluminium window, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete.	5.45	sqm	4,553.48 ₹24,793.7 Lowest
1.01	13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)	117.5	sqm	321.96 ₹37,830.3 Lowest
1.01	13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)	56.58	sqm	265.05 ₹14,995.2 Lowest
1.01	13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)	247.28	sqm	106.36 ₹26,300.17 Lowest

Sl No

Description

Qty

Unit

ABRAHAM ITTIYAVIRA

1.00Building Maintanance

1.00

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

285.18

188.09

₹53,638.57

Lowest

1.00

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

102.45

150.9

₹15,459.71

Lowest

1.00

OD233211/2024-2025:DSR 51.20 Providing and fixing pre coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

86.67

sqm

582.59

₹50,493.08

Lowest

1.00

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

0.38

cum

7,915.22

₹2,991.95

Lowest

1.00

50.9.2.3:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer in -charge. using Vengai wood

1.39

sqm

2,544.77

₹3,532.14

Lowest

1.01

21.10:Providing and fixing double glazed hermetically sealed glazing in aluminium window, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant ) etc. as per specifications, drawings and direction of Engineer-in-Charge complete.

5.45

sqm

4,553.48

₹24,793.7

Lowest

1.01

13.4.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

117.5

sqm

321.96

₹37,830.3

Lowest

1.01

13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

56.58

sqm

265.05

₹14,995.2

Lowest

1.01

13.44.1:Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)

247.28

sqm

106.36

₹26,300.17

Lowest