Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST |
Tender Value
₹8.1 L
EMD Value
₹20,322
Closing Date
22 Nov 2024, 5:00 pmClosed
Assstant Engineer
Office of the Assistant Engineer, LID EW SubDivision ,Ettumanoor Block Panchayat
Annual Plan-2024-25-EBP 77/24-25 Aymanam division -construction of compound wall and side protection for Anganwadi no49-
2024_LSGD_699195_22
DB-103/2024
Open Tender
Civil Works - Others
Item Wise
Office of the Assistant Engineer, LID EW SubDivis
Please refer Tender documents.
11 documents required · 11 mandatory
₹1,795
Yes
₹20,322
Yes
2 May 2025
15 Nov 2024
25 Nov 2024
15 Nov 2024
22 Nov 2024
15 Nov 2024
Amount
compound wall
2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
OD184327/2024-2025: Coconut Pile - Supplying and stacking well matured straight coconut post for driving down throug various strata bellow bed level including cost coveyance labour charges etc complete. (modified item 60.64.1)
OD184326/2024-2025:Coconut Pile - Driving down coconut pile to lines and levels through variuos strata including all hire charges and labour for fixing , staging platform and all other appliances necessary for pile driving down after pointing the bottom end
OD184325/2024-2025:DRY RUBBLE MASNRY:dRY RUBBLE MASONRY WITHOUT CONCRETE LELVELLING COURSE MASONRY WITH GOOD QUALITY BLASTED RUBBLE INCLUDING PACKING TO COMPACTNESS TO LINES AND LEVLES COST AND CONVEYANCE OF ALL MATERIALS LABOUR CHARGES ETC COMPLETE AS PER DIRECTIONS OF dEPARTMENTS OFFICERS AT SITE
5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.82.2:Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.Two coats
50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge.
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
OD184341/2024-2025:Supplying and erecting RCC precast ring 1.00mt dia , depth of 0.3cm
OD184344/2024-2025:PROVIDING AND LAYING 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6 mm metal t etc. all complete as per the direction of Engineer-in-charge.
Bidder Name
ROBY XAVIER
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1102931.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .