S.R. to Revenue Staff Quarters at Jhalod Dist. Dahod (Repairs to Toilet block, flooring, Drainage line, Water proofing, Colour work)

Name of Work :- S.R. to Revenue Staff Quarters at Jhalod Dist. Dahod

(Repairs to Toilet block, flooring, Drainage line, Water proofing, Colour

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

1 Providing and laying broken china mosaic flooring for terrace using 860.00 Sq.m. 779.70

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 top lain or slope and to be tempered to bring mortar crème

out up to surface using white cement including rounding off junctions

and extending them up to 15 cm along the wall, clearing with water and

oxalic acid etc. as directed.

2 Providing and fixing 35mm thick factory made moulded door 55.00 Sq.m. 1243.31

shutter consisting of solid core single leaf flush door of 30mm

thickness, lipped with 15mm (5mm x 3) thick x 30mm width on one

styles and top rail and 10mm (5mm x 2) thick x 30mm width on the

other styles and bottom rails. The inner panel laminated with 2mm

thick termite proof, water proof and fire resistant moulded PVC sheet

with 2, 4, 6 raised panel design in different plain and / or prelim colours

on one side after routing the moulded design on flush door and 2mm

plain and / or prelim PVC sheet on other side using rubber adhesive on

the PVC liping etc. complete as per direction of Engineer in charge,

manufacture's specification and drawing.

3 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 28.00 Each 196.66

including chowkhats architraves, hold fasts and other attachment etc.

complete and stacking them within all lead and lift. (i) Not exceeding

4 Providing and fixing M.S. grills of required pattern to wooden frames 9780.75 Kg. 110.31

of windows etc with M.S. flats at required spacings and frame alround

square or round bars with round headed bolts and nuts or by screws

(A) Plain grill.

5 Providing, laying and jointing in true line and level I.S.I. mark 110mm 165.00 Rmt. 897.79

dia. U.P.V.C. pipe (Type B) confirming to IS 13592-1992 with one end

plain and other end socketed with rubbering & fitting conforming to ISI

14735-1999 of approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe shall be fixed on

wall using of PVC clamp of the size 110 mm diameter x 149 mm length

x 145 mm height at every 2000 mm center to center or shall be

concealed in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

6 Constructing brick masonary chamber for under ground C.I. 14.00 Each 3660.76

inspection chamber and bends with bricks having crushing strength not

less than 35 Kg/cm2 in C.M. 1:5 C.I. Cover with frame (light duty)

mm. x 610 mm. Internal dimensions, total weight of cover with frame to

be not less than 38 Kgs. weight of cover 23 Kg. and wt. of frame

Kg) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand :

graded stone aggregate 20 mm. size) foundation concrete 1:5:10

inside plaster 15 mm. thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls & a bed concrete etc.

complete (ii) inside dimensions 500 mm x 700 mm and 450 mm.

deep for pipe line with one or two inlets.

7 Distempering (two coats) with oil bound distemper of approved brand 2425.08 Sq.m. 77.30

and manufacture and of required shade on wall surface to give an

even shade over and including a priming coat with distemper primer of

approved brand and manufacture after throughly brushing the surface

free from mortar dropping and other foreign matter and also including

preparing the surface even and sand papered smooth.

8 Distempering (two coats) with oil bound distemper of approved brand 867.00 Sq.m. 85.85

and manufacture and of required shade on wall surface to give an

even shade over and including a priming coat with distemper primer of

approved brand and manufacture after throughly brushing the surface

free from mortar dropping and other foreign matter and also including

preparing the surface even and sand papered smooth, distempering

with oil bound washable distemper on ceiling and slopping roofs.

9 Providing and fixing standard extruded of alluminium section of size 9.00 Sq.m. 1290.81

63.50mm x 38.10mm x 1.95mm @ Wt. 1.094 Kg/mt with colour

powder coated alluminium frame with 5 mm thick transparent bronze

colour tinted float glass with colour anodized alluminium frame for

ventilation with 5mm thick frosted glass as details etc. complete for

10 Providing and fixing 30mm thick FACTORY MADE SOLID PANEL 24.00 Sq.m. 1146.37

PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of

19 gauge thickness and size of 19mm x 19mm for stiles and 15mm x

15 mm for top and bottom rails. M.S. frame shall have a coat of steel

primers of approved make and manufacture, M.S. frame shall be

covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 x

mm forming stiles, and 5mm thick 75mm wide PVC sheets for top rail,

lock rail and bottom rail on either side, and 10mm (5mm x 2) thick,

20mm wide cross PVC sheet as gap insert for top rail and bottom rail,

Panelling of 5 stiles and rails with 30mm wide x 5mm thick PVC sheet

beading on either side, and joined together with solvent cement

adhesive,. An additional 5mm thick PVC strip of 20mm width is to be

stuck on the interior side of the ‘c’ channel using PVC solvent cement

adhesive etc. complete as per direction of Engineer in charge,

manufacture’s specification and drawing.

11 Providing laying and jointing in true line and level I.S.I. mark 50mm 366.00 Rmt. 195.67

dia. U.P.V.C. Pipe (SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of all

It. Description of Item Qty. Unit Rate in Total

No. Figures Amount

12 Providing and fixing ball cock of approved quality as directed. (A) 14.00 Each 189.84

Copper Metal (ii) 50mm dia.

i.e. Rs. Twenty Three Lakhs, Ninety Eight Thousand Twenty Four and Eighty Three Paisa Only.

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the

rate of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as

directed and to be approved from the Engineer in charge.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Dahod (R & B) Sub Division, Dahod (R & B) Division, Dahod (R & B) Division,

Dahod Dahod Dahod