Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹32.1 L+₹1.3 L (4.37%)Rejected-Finance TEHSIL BHORANJ VILLAGE SAMMU BHORANJ ROAD DISTT HAMIRPUR HP 176045 | HAMIRPUR | HIMACHAL PRADESH | 176045 | L2 | Rejected-Finance L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical Technically Not Qualified |
Tender Value
₹29.5 L
EMD Value
₹51,800
Closing Date
14 Feb 2023, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Elect. Division HPPWD Palampur
C/O Centre of Excellence in Mental Health Dr.RPGMC Kangra at Tanda, HP (SH- Providing Sprinkler system therein)
2023_PWD_68154_2
Elect. Division HPPWD Palampur
Open Tender
Electrical Works
Item Rate
365 days
Kangra at Tanda in Distt. Kangra
Please refer Tender documents.
11 documents required · 11 mandatory
₹1,500
Yes
₹51,800
Yes
8 Mar 2023
6 Feb 2023
14 Feb 2023
6 Feb 2023
14 Feb 2023
6 Feb 2023
Amount
Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required in all respect and to the best satisfaction of Engineer-in-Charge.
Makes:- Zoloto/Sant/Leader.
Providing, laying, jointing, testing and commissioning of following sizes of MS 'C' Class (Heavy duty) pipes conforming to IS-1239 with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of iron unless specified otherwire and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.Priorto application of primer the surface should be cleaned dirt,rusts,rough substance etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.
32 mm dia pipe
40 mm dia pipe
50 mm dia pipe
80mm dia pipe
100 mm dia pipe
150 mm dia pipe
Makes:- Jindal/B.S.T./Surya Tube.
Providing two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the Project Manager as required complete in all respects and to the best satisfaction of Engineer-in-charge.
32 mm dia pipe
40 mm dia pipe
50 mm dia pipe
80mmdia pipe
100mm dia pipe
150 mm dia pipe
Providing fixing,testing and commissioning of 15 mm dia chrome furnished sprinkler head with quartz type bulb,operate at 68 degreeC complete as per specification, sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed) as required complete in all respects and to the best satisfaction of Engineer-in-charge.
Makes:-Zoloto/Minimax/Omex./ Tyco
Providing & Fixing of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe of 100 mm dia with Caliberation: 0-20 Kg/cm2 as required complete in all respects and to the best satisfaction of Engineer-in-charge.
Make:- H Guru, Bell, Fiebig
Providing & fixing Gun metal fire hydrant single headed landing valve with 80 mm N.B. flanged inlet, s.s spindle controlled 63 mm dia female instantaneous outlet type. SS coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS standards as required complete in all respects and to the best satisfaction of Engineer-in-charge.
Make Minimax /CeaseFire/Tyco
Providing & Fixing of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with Gun Metal male & female instantaneous type coupling (IS 903) (For internal and External hydrant system) as required complete in all respects and to the best satisfaction of Engineer-in-charge.
Make Minimax/CeaseFire/Tyco
Providing and Fixing Gun Metal 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects and to the best satisfaction of Engineer-in-charge.
Make Minimax/CeaseFire/Tyco
Providing & fixing ball valve 25mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge.
Make Sant/Zoloto/Advance
Providing & fixing of Bitumein sheet 4mm thick (pipekot) wraping & coating for underground pipe150 mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge.
Make Shalimar/WTL or equivalent
Providing & Fixing of wall mounting swinging type first aid fire hose reel with drum, hanging bracket, 36.5 Mtr. length x 20 mm dia high pressure hose reel tubing as per IS: 444 with gun metal (GM) shut off nozzle having 5 mm dia orifice. The hose reel shall be conforming to IS : 884-1985. Rate shall include 25 mm dia M.S. pipe connection from Riser to hose reel, sockets, nipples, elbows and ball valve (25 mm dia). Drum shall be fixed on adjoining wall through anchor fasteners / cement concrete block as and when required complete in all respects and to the best satisfaction of Engineer-in-charge..
Make Minimax/CeaseFire/Tyco or Equivlent
Weather proof standard fire hose cabinet made of 18 SWG powder coated fibre. sheet having single or double opening glazed (3.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish (as per IS : 5, shade no. 536) with " Fire Hose" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 No. branch pipe & nozzle spanner as required complete in all respects and to the best satisfaction of Engineer-in-charge.
Make Minimax/CeaseFire/Tyco
Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt, nuts, gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm. as required complete in all respects and to the best satisfaction of Engineer-in-charge.
80 mm dia.
150 mm Dia
200 mm Dia.
Makes:-Zoloto/Sant/Audco
Supply of M.S structure Work for the sprinkler line with Angle support with welding work, Thread rod , Fastner etc. coin all respectmplete
Providing, fixing,testing & commissdioning of Control Valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler syatem activatees,pressure gauges, emergency release strainer Pressure switch ,cock valve complete with drain v alve and bypass, test contyro box,ball valve, M.S pipe of requird size,flanges, orifice plate.gasket etc. of following size as required including carriage of material in all leads and lifts.
Providing and fixing of stainles steel flexible sprinkler pipe SS Braided type, Model Gil- DB_ 1525_NPT (UL liste & FM Appro) with SS accessories complete in all repect.
Make: Minimax (Gilpro) /Cease fire/ tyco
Inside size 1200X900mm and 1500 mm deep including . C.I Cover and Frame (medium duty) 500mm internal diameters total weight of and frame to be not less than 116 kg. (Weight of cover 58 kg. Weight of frame 58 kg.)
With 300mm thick walls of brick masonry using common burnt clay building bricks in cement morar 1:3 (1 cement: 3)
Suppling and installation following Size of Perforated Hot Dipped Galvanised iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the celling with G.I suspenders including G.I bolts & nuts,etc as required.
225 mm width X 50 mm depth X 1.6 m Thickness
Providing, installation,testing and commissioning of Stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel. Grade 304 sheet with 3mm dia hole with stainless steel flange including carriage of material in all leads and lift. Make: Minimax/Zoloto/Sant/ Kartar.
200 Mm Dia.
Providing & Fixing of M.S Flange for the Valve,Hydrant Landing Valve,etc for the the Hydrant and Sprinkler line with belding, Net Vots etc. complete in all respect
Providing Core Cuting Hole in the slabs ,walls for the laying of M.S pipe for the fire Hydrant & sprinkler Riser, for the following Size as required and complete the same in good.
Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering:-Make :- SCI/KEI/Plaza
Armoured cable 95 sq. mm (3.5 core)
Fire Alarm Work.
Supply, Installation, Testing and Commissioning of addressable multisensor smoke detector including mounting base with LED… etc. complete as required with 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements; Drift Compensation feature & Automatic addressing. Detector should monitor Electromagnetic interference and report to the panel - current and average values.Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL/EN/VDS certification. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector)
Make Autronica/ Notifire / Bosch./Simens- EN
Supply and erection of 25 mm dia PVC conduit pipe ISI marked (Medium) recessed in wall /ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect to the entire satisfaction of Engineer-in-Charge of work. Make Diplast/Polyplast.
Makes:- Diplast/Polyplast/PolyFit
Supply, Installation, Testing & commissioning of PVC unsheathed s/c stranded ( ISI marked ) copper contuvtor cable 1100v grade in existing pipe excluding cost and erection of pipe but including connection etc. with all labour and material as required complete in all respects and to the best satisafaction of Engineer-in-Charge.
Makes:- FINOLEX/POLYCAB/HAVELLS
PVC unsheathed copper size 1.5 sq mm single core
TARUN FIRE SYSTEM
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .