CONSTRUCTION OF BARRACK BUILDING AT POLICE LINE, RACE COURSE, DEHRADUN PHASE II

P/L RCC 1 : 1½ : 3 for columns, slab, beams, lintels, projections, staircase, pillars piers etc. in super structure.

Centering and shuttering

For Col. In super structure

For Beam, Lintel etc.

For Suspended floor, slab landing etc.

For Staircase

Walls (any thickness) including attached pilasters,butteresses, plinth and string courses etc.

Steel reinforcement for R.C.C. work i/c straightening, cutting, bending, placing in position and binding all complete :Thermo-Mechanically Treated bars

Brick work with bricks of Ist class in foundation and plinth in cement mortar 1 : 6 ( 1 cement : 6 coarse sand ).

Brick work with bricks of 1st class in superstructure in cement mortar 1 : 6 ( 1 cement : 6 coarse sand )

Half brick masonry with bricks of 1 st class in superstructure in C.M. 1 : 4 ( 1 cement : 4 coarse sand )

P/F Flush door shutter with commercial ply vaneering on both faces. 35 mm thick

P/F S.S. fitting for door windos

Sliding door bolt 300x16mm

Tower bolt 250x10mm

Tower bolt 150x10mm

Handles 125mm,

Handles 100mm,

Aluminium Floor stopper single rubber

P/F glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

Providing and fixing MS Tee iron section for doors, windows and ventilators i/c cutting welding to required size, MS lugs 0f 15x3mm fixed in position with the help of CC blocks 0f size 15x10x10cm with MS butt hinges welded to frame complete.

Providing and fixing MS standard rolled steel glazed windows of required sizes side hung, top hung or fixed in position with CC block of size 15x10x10cm with all fittings and modi float glass 4mm thick complete.

P/F galvanised M.S. wire gauge for window With 12 mm mild steel U beading.

P/F M.S. flat grill for windows

P/F M.S. Railing with M.S. Round or Sq. pipe.

P/F circular / hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia. 140 mm. , 73 mm. height top lid of 1.5 mm. thick M.S. sheet with it's top surface hacked for proper bonding , top lid shall be screwed in to the cast iron / M.S. sheet box by means of 3.3 mm. dia. round headed screws , one lock at the corner. Clamp shall be made of 12 mm .dia. M.S. bar bent to shape as per standard design.

25 mm thick Kota stone slab flooring in C.M. 1:4

P/F Ceramic glazed tiles in floor and dado in C.M. 1 : 3 ( 1 cement : 3 coarse sand ) filling of joints of tiles with white cement.

Green marble stone flooring with 18mm thick

P/F Upvc pipe for rain water disposal on wall surface. 110mm dia.

P/F fittings for Upvc rain water pipe.

Plain bend 110 mm dia.

Shoe (Plain) 110 mm dia.

Making Khurras 45x45 cm in C.C. 1:2:4

P/F 110 mm UPVC pipe clips of approved design for UPVC rain water pipes

15mm cement plaster in cement mortar 1: 6 ( 1 cement : 6 fine sand )

12mm thick cement plaster in cement mortar 1 : 6 ( 1 cement : 6 fine sand )

6 mm C.P. 1:3 (1 cement: 3 fine sand) finished with a floating coat of neat cement.

Finishing walls with textured exterior paint

Applying oil bound distemper two or more coats on walls with base coats of birla putty.

Painting with synthetic enamel paint two or more coats.

P/F White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

P/F white vitreous china Indian type W.C.

P/F looking mirror of Rectangular shape 453x357mm

P/F Upvc soil, waste and vent pipes 100 dia.

P/F PTMT towel rail complete with brackets fixed to wooden 450mm long towel rail

P/F Upvc nahani trap 100x100mm dia

P/F PTMT soap Dish Holder having length of 138m 102mm, height of 75mm.

P/F 110 mm UPVC pipe clips of approved design for UPVC soil waste & vent pipes

P/F Upvc terminal guard 100 mm dia

P/F PVC connection 450X15 mm.

P/F Upvc Plain bend 100 mm dia.

P/F Upvc door bend 100 mm dia.

P/F 32mm dia P.V.C. waste pipe for sink/washbasin

P/F Upvc door tee 100X100X100 mm dia.

P/F white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

P/F white vitreous china flat back half stall urinal with 5 litre P.V.C. automatic flushing cistern

Providing and fixing GI pipes and fittings of medium class concealed in wall chases and repairing with cement mortar. (i) 15mm nominal bore.

Providing and fixing GI pipes and fittings of medium class on surface of the walls with MS clamps complete.

25 mm nominal bore.

32 mm nominal bore.

Providing and fixing GI pipes below ground level i/c excavation of trenches and filling up to 23cm with fine sand(i) 40 mm nominal bore

P/F CP brass bib cock 15mm nominal bore

P/F CP brass concealed stop cock 15mm dia

Providing and fixing brass gate valve

(i) 20mm dia.

(ii) 25mm dia.

P/F PTMT grating 100 mm dia.

P/F polyethylene w tank 500 lit cap.

Providing and fixing brass ball cock 20mm dia.

P/F brass ferrule with C.I. mouth cover including boring and tapping the main (i) 25mm dia.

P/F CP. brass Shower 100 mm dia.

Providing and laying integral cement based treatment for water proofing on the vertical surface by fixing specified stone slab 22 mm to 25mm thick with cement slurry mixed with water proofing compound conforming to IS:2645 in recommended proportions with a gap of 20mm (minimum) between stone slabs and the receiving surfaces and filling the gaps with neat cement slurry mixed with water proofing compound and finishing the exterior of stone slab with cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick with neat cement punning mixed with water proofing compound in recommended proportion complete at all levels and as directed by Engineer-in-charge : Using rough Kota stone

Providing and fixing Heat Resistant Terrace Tiles (300mmx300 mmx20 mm) with SRI (solar refractive index)>78, solar reflection>0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace. laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

Providing and laying brick tiles over mumty roofs, grouted with cement mortor 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories Coupler - 110mm. Dia

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), i/c dressing of sides and ramming of bottoms, lift upto 1.5 m, i/c getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. :All kinds of soil.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Disposal of surplus excavated soil as directed, within a lead of 10 km

P/L C.C. of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:cement mortar 1 : 4 ( 1 cement : 4 coarse sand ).

P/L 52 mm thick C.C. flooring with concrete hardener topping, under layer 40 mm thick C.C. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

20 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

P/F in position pre cast RCC manhole cover and frame of required shape and of approved quality. Rectangular shape 600x450mm internal dimensions

Providing MS foot rest including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 as per standard design. (i) with 20x20mm square bar

Wiring for light point/ Fan point/ Exhaust fan point/call bell point with 1.5 sq. mm. FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit with piano type switch phenolic laminated sheet,suitable size MS box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.

Wiring for twin control light point with 1.5 sq.mm FR PVC insulatedcopper conductor single core cable in surface/ recessed PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size Gl box and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit along with one no. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 2x2.5 sq.mm+1x2.5 sq.mm earth wire.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. 4x6 sq.mm+2x6 sq.mm earth wire.

Supplying and fixing 5/6 amps switch on the existing switch box/ cover including connections etc. as required.

Supplying and fixing 3 pin 5/6 amp socket outlet on the existing switch box/ cover including connections etc. as required.

Supply and fixing metal box of 180mmx 100mm x60 mm deep ( Nominal size) on surface of in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supply and fixing metal box of 150mmx 75mm x60 mm deep ( Nominal size) on surface of in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 5/6 & amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Supply and fixing 3 pin, 5 amp. Ceilling rose on the existing junction box/ wooded block including connection etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Suppying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required 75 mm x 75mm x60mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc. as required. Telephone socket outlet

Supplying and fixing following piano type switch/ socket on the existing switch box/cover including connections etc. as required. TV antena socket outlet

Supply & drawing of following pair 0.5 sq. mm. FR PVC insulated copper conductor unarmoured telephone cable in the existing surface/ recessed PVC conduit as required. 2 pair

Supply & drawing of co axial TV cable of RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielde with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed PVC conduit as required.

Installation, testing and commissioning of pre- wired, fluorescent fitting/ compact fluorescent fitting of all type, complete with all asccessories and tube etc. directly on celling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation,testing and commissioning of celling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Supply and fixing of stepped type electronic fan ragulator in exiting switch box including connection with 1.5sq.mm FR PVC insulated, copper conductor, single core cable and earthing the regulator etc. as required.

Installation of exhasust fan upto 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, conn