REPAIR TO INTERNAL WATER SUPPLY PLUMBING WORK SANITARY FITTINGS CLEANING OF WATER TANKS AND OTHER MISCELLANEOUS WORKS OF HQ DGBR OTM COMPLEX AT SEEMA SADAK BHAWAN NEW DELHI UNDER 1353 GE 21 BRTF CE P SHIVALIK

Attending day to day complaint to water leakage from taps, WCs, flushing cistern, urinals, wash basins, bottle traps etc and any obstruction to water supply requiring plumbing work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etc in the area of OTM complex and office compex at HQ DGBR all as specified and directed. Note : (i) The complains shall be attended & defects shall be rectified within same day i.e from 0830 hrs to 1730 hrs excluding Sunday & gazetted holiday , commencing from date and time of notifying the complaint slip failing which a penalty @ Rs. 700/-Per day (08 hrs) shall be levied on/imposed on the contractor and recovery shall be made from his dues. Any item/material which are required to be replaced shall be paid under respective item under this schedule here in after as 'Supply Only'. The labours/ tradesmen required for replacement of 'Supply Only' items are included under this item. However labour charges for items of 'M&L' , 'S&F' and 'in repair' shall be included in respective item. (ii) In addition of above Contractor shall arrange suitable T&P such as die set (1/2" to 1") washers of all size, safeda, thread (soot), M-seal, screws, nails and the like incl necessary form work and scaffolding and safety measures to make it functional and leak proof complete all as specified and directed (iii) The above aspect shall be deemed to be included in the quoted rate of this item. (iv) Contractor or his rep will report daily at complaint cell for collection of complaints from the concerned JE's Incharge, in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of Engr in charge by the contractor/ his rep immediately. If Engr in charge is satisfied with contractor's view, no recovery will be made on this account.

Cleaning and removing all scale and dirt, etc, from tanks exceeding 500 and not exceeding 1000 Litre capacity and from mouths of circulating pipes, etc. complete all as specified and directed.

Cleaning and removing all scale and dirt, etc., from tanks exceeding 1000 and not exceeding 2000 Litre capacity and from mouths of circulating pipes, etc. complete all as specified and directed.

Dismantling water tanks and removing to store capacity 500 liters and S&F 500 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl 15 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Dismantling water tanks and removing to store capacity 1000 litres and S&F 1000 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Dismantling water tanks and removing to store capacity 2000 litres and S&F 2000 litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I incl 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves ISI marked, 15 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Make: Leader

S & F in repair Gun-metal, globe or gate valves ISI marked, 20 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Make: Leader

S & F in repair Gun-metal, globe or gate valves ISI marked, 40 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. Make: Leader

S&F in repair Ball valves 15 mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight -142gms) complete all as specified and directed. Make: Prayag