Providing Road Safety device and Road Furniture from km 173.325 to km 180.00 and km 191.00 to km 206.50, Repair and maintenance to stretches from km 175.90 to km 180.00 and providing CC Block hard shoulder at Katigorah from 198.874 to km 200.400 and

Amount

Providing and erecting overhead signs of anti-corrosive steel ( All the steel work must be TATA/SAIL/any other approved brand.) tubular framed structure for retro reflective signage boards made of high intensity grade encapsulated lens type retro Reflective sheeting conforming to ASTMD4956 type B III specifications and having approved pattern over its entire surface bonded on to 2.00 mm thick aluminium sheet with back supporting angle iron frame of 35x35x4mm angle iron duly riveted with solid MS & aluminum rivets. The entire face of the sign shall be covered & bounded with yellow/white/red/blue high intensity encapsulated lens reflective sheeting with distinctive hoed pattern on front site (no plain surface) with heat lamp vacuum applicator machine only. The yellow/white/red/blue portion of the board shall be screen printed on the high intensity shed base including fixing the board on portal/support/wall/dowel rod etc., with contractors clamps/cleats/bolts/rivets/wells including all contractors materials, labour, tools, lead & lifts etc. complete and all other incidental charges necessary for successful completion of work as per specifications and as directed. (For 3nos 12 mtr width with double post at ch 175420 and 201820)

Providing retro reflective sign board of high intensity grade reflective sheeting conforming to ASTMD4956 BIII specifications having approved pattern over its entire surface bonded on to 2 mm thick aluminium sheeting, the entire face of the sign shall be covered & bounded with yellow/ white/red/blue high intensity grade with distinctive nod pattern on front site with heat lamp vacuum applicator machine only. (For 2nos Size 1.20 m x 13m at ch 175420 and 201820)

Earth Work in excavation

P.C.C work (M-15)

Reinforcement, Rates per MT (as per SOR 2013-14)

M 20 grade of RCC work (For 2 nos of Over head Gantry Board at ch 175420 Mallidor and 201820 Badarpurghat on NH-44 )

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications.From km 175.90 to km 180.00 Edge Line Marking,Centre line marking,Teansverse marking,Pedestrian crossing,Stop Line etc

Providing reflective pavement marker with a provision spike at the bottom with micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H’s fix to the road surface using the adhesive and the producers recommended by the manufacturer with three month replacement warranty and free maintenance.

Providing and fixing of retro- refectories cautionary, mandatory and informatory sign as per IRC: 67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. a) 60cmx50cm rectangular.Chevron Sign Board 2 (two) Nos of Sign Board from the both side fixed on a single Iron post of 75X75x6 mm b). 90cm x 30cm rectangular. (Hazard Marker). 1x4x21 Nos Bridge/Rail Crossing

1x4x21Nos Bridge, Rail crossings & culvert parapet walls

Providing and fixing of retro- refectories cautionary, mandatory and informatory sign as per IRC: 67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminum sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. a) 90cm equilateral traingle (for Feeder Road 2X32 nos)

Direction and place identification sign more than 0.9sqm size board. Providing and erecting direction and place identification retro-Reflectrorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide clause 801.3 fixed over aluminium sheeting, 2mm thick with area exceeding 0.9sqm fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm, 2 nos. firmly fixed to the ground by means of properly design foundation with M-15 grade Cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing and sign. . ( All the Steel work must be Tata/Sail/or any other approved brand) 120cm x 120cm Square. (Highway Quatation Board). 2x15 Nos

Providing metal tubular delineator (50mm dia and 1.25mm thick) with 15cm reflector made of heigh intensity grade retro reflectorised sheeting around the pipe at top covered with wire mesh of 20cm length with two nos of similar reflective bands and bottom fastener M.S. angle including firmly fixing the delineator to the ground by means of CC(M-15) foundation of size-(25cmx25cmx25cm), 25cm below ground to the true line and level as directed by the deptt. With six months replacement warranty and free maintenance. 120cm x 120cm Square.

Type - A, "W" : Metal Beam Crash Barrier (Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2m center to center, 1.8 m high, 1.1m below ground/road level, all steel parts and fitments to be galvanized by hot dip process, all fitting to conform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150mmX75mmX5mm, 330mm long complete as per clause 810.)

Providing and fixing of retro- reflective 50mm width tape as per IRC : 67 made of encapsulated lens type HIP(High Intesity Prismatic) shetting vide clause 801.3 for Highlight the metal Beam crash barrier.

Painting Two Coats on New Concrete Surfaces' Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces Bridge railing with post & Parapet wall

Providing ‘Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mmx125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician). 'a) Bi-directional Stud-

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 1 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratory as directed by the deptt.)

Bituminous Concrete (Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 % of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoRT&H cl. no.509. complete in all respect. including all lift and lead and cost of testing of materials at site and laboratory as directed by the deptt.) (a) With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H specification),With anti stripping agent (I)'with PMB-70, (ii) for Grading-II(13 mm nominal size)

Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres. For CC Block Hard shoulder

Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC,and compacting with vibratory roller to achieve the desired density,complete as per cl. 401( with all lead and lift.)

Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sb-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density ( including all lead & lift)

Construction of drain with RCC covewr slab in stretches at Badarpur km 23rd to km 25th as directed by the department

Providing interlocking cement concrete block pavement of grade M40, thickness 80 mm over 30 mm thick layer of sand blanket including collection, supply and spreading of CC block( M 40) and coarse sand etc complete as directed. Katigorah town from ch.197.915 to km 200.400 & Badarpur town from 201.610km to 204.540

CC Restrained beam includiong feeder roads as directed by the department

Repairing of RCC br railing & crash barrier , Wheel Guard.193/1 , 197/4 ,202/2 = 65m

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. as per MoRTH specification 1500, 1700 & 2100 Crash barrier Br no.193/1 , 197/4 ,202/2( l=10+15+2*20=65m) - 12mm dia main bar @150 c/c

M/s CHANCHAL PAUL