Renovation of Emergency Control Room at Fire Section

Amount

Fixing window frames at existing opening including concreting holdfast etc without cost of wooden items

14.2.2 : Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm, with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead:Window chowkhats

Fixing door frames at existing opening including concreting holdfast etc without cost of wooden items

14.2.1 : Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm, with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead:Door chowkhats

Tile dismantling

15.23.1 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Dismantling Steel doors

15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

Dismantling of aluminum doors and windows

15.57 : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

Demolishing brick work

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

vitrified digital tiles of size 1200 x 600mm

Supply and laying first quality vitrified digital tiles of size 1200 x 600mm of approved make like Kajaria/Cera/johnson/somany/NITCO or other approved brand in approved shade and pattern for floors as per architectural design laid on 20mm thick cement mortar 1:4 (1 cement : 4 course sand ) with tile spacer and jointing with with epoxy joint fillers minimum of 5mm thick of matching shades of approved brand, complete. (The required OPC cement shall be supplied by KMML at our store).

Tile Skirting

Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours ; shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), with tile spacer and jointing with with epoxy joint fillers minimum of 5mm thick of matching shades of approved brand, complete. (The required OPC cement shall be supplied by KMML at our store). Size of Tile 1200x600 mm

Plastering with 12 mm cement plaster

Plastering with 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) (The required cement shall be supplied by KMML at our store)

Wall Paneling

Fabricating and fixing at site wall paneling of height 1200mm on frame work of height 120cm is made using 19mm marine ply wood sections with grid of average spacing 60cm x 60cm in vertical and or horizontal screwed on to wall using steel screws of suitable size. 9mm tk marine plywood/flexy plywood is fixed on to the frame work with joints perfectly finished without any projections at joints. 1mm tk laminate (Type I, Type II and Type III) as specified in list of approved brands is pasted as per the detail specification in drawing . 15mm x 85mm or matching size Beech wooden beeding is fixed over top and at cut edges. Necessary grooves, cuttings and inlays should be given as per drawings. A skirting is fixed on to it at floor level as per detail . All exposed wooden surfaces are polished with melamine matt /clear after applying necessary base preparations, including concealing the screwheads Cost of skirting and polishing will be a separate item.(Refer Dwg. A-05)

Wooden skirting for wall Panelling and Partition works

Fabricating and fixing at site on to wall / paneled wall/ partition or counters at base a teak/beech wooden skirting of size 75mm x 6mm with top detailed as per drawing and fixed on to wall or partition base using suitable size brass screws or headless brass nails and along with glue. The joints of the skirtings should be neat and no visible difference or overlaps should be seen. The surface is polished with melamine semi gloss after preliminary preparation of the surface.

False Ceiling Gypsum

Providing and fixing stepped false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flanged of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts &bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45x15x0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27 mm high having flages of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of day wall screws of size 3.5x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture&specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitable fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with. a.8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through acutoclaving process with Plastic coating on top side.

Full Partition

Fabricating and Fixing at site full partition (double skinned ) of height approx. 3.00meter and width 75 mm having 6mm thick glass of width 40 cms at 2.40m height to form full height cabins. A frame work of height 120 cm is made using 19 mm Marine plywood sections with grid of average spacing 60cm x 60 cm in between vertical or horizontal members frame work is screwed on to floor/wall using steel screws of suitable size. Necessary cuttings in frames is to be provided to draw cable conduits. 9 mm tk Marine ply wood or flexy plywood is fixed on to both sides of the frame work with joints perfectly finished without any projections at joints. 1 mm tk laminate (Type I, Type II and Type III) as specified in the list of approved brands is pasted on both sides as per the detail specification in drawing. 80 mm decorative beeding/band to be provided at approx.1 meter height from floor level as per the direction of engineer in charge. Wooden cornace to be provided at ceiling level. Necessary grooves, cuttings and inlays should be given as per drawings. Cuttings for fixing electrical boxes/switches should be provided where ever necessary.A skirting is fixed on to it at floor level as per details. All exposed wooden surfaces are polished with melamine matt/clear after applying necessary base preparations , including concealing the screw heads cost of skirting and polishing will be separate item (Refer Dwg. A-06)

Chromium plated brass handles

Providing and fixing chromium plated brass Square/cylindrical handles with necessary screws etc. Complete:300 mm

Hold fast

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Wooden frame for door and window

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood / Jack wood / Mahagany wood.

mortise lock

Providing and fixing mortise lock set of godrej or equivalent approved by Engineer in charge to the wooden door shutter (handle size minimum 8inch)

Wooden shutter for doors

Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer in charge. using Mahogany.

Wooden shutter for window

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge.using Mahogany

Float glass panes

9.7.7.1 : Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:Float glass panes4 mm thick glass pane

Wooden paneling

Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Mahogany

M.S Grill for windows

Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved epoxy primer and 2 coats of epoxy paint all complete.<br>Fixed to steel windows by welding

Table Type 1

Fabricating and supplying at site, office table for the main counters made of 19 mm thick laminated MPW [BWP Grade] IS: 710 boxing as shown in drawing. The shutters, shelves shall be of 18 mm thick MPW laminate and drawers fixed on SS drawer channels, as per the size specified and in site finished with 1 mm laminate and edges finished with 2mm/1mm thick PVC edge banding tape and fixed with SS Square/cylindrical handes, locks of approved brands etc. and provided with bushes at bottom concealed. The top shall be of 19 mm Marine ply wood with post formed front and rear, and sides finished with 2mm/1 mm thick PVC edge banding tapes of matching shade. Size of table 1900x750 (Refer Dwg. A-03)

Table Type 2

Fabricating and supplying at site, office table for the main counters made of 19 mm thick laminated MPW [BWP Grade] IS: 710 boxing as shown in drawing. The shutters, shelves shall be of 18 mm thick MPW laminate and drawers fixed on SS drawer channels, as per the size specified and in site finished with 1 mm laminate and edges finished with 2mm/1mm thick PVC edge banding tape and fixed with SS Square/cylindrical handes, locks of approved brands etc. and provided with bushes at bottom concealed. The top shall be of 19 mm Marine ply wood with post formed front and rear, and sides finished with 2mm/1 mm thick PVC edge banding tapes of matching shade. Size of table 1500x650 (Refer Dwg. A-02)

Brass tower bolt

9.74.1 : Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm

Box for enclosing fire alarm

Fabricating and fixing at site box for enclosing electrical conduits and fire alarm in the space provided with height of 310cm using 19mm thick MPW (BWP grade) IS:710 for shutters and sides with locks S.S self closing hinge, stainless steel handles of approved brand. All the cut edges of MPW should be finished by fixing PVC edge banding tapes 2.00mm and 1.00mm of matching shapes as shown in the plan should be fixed inside on supporting chips, base supported with PVC bush as per required size. All the front elevated surfaces should be finished with 1.00mm laminate. The Front elevational area of the box shall be measured for payment purpose.(Ref:DWG A 04)

Double action hydraulic floor spring

21.4.1 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness

Scrapping walls

Removing dry or oil bound distemper, enamels, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, scaffolding at all heights etc complete

Primer

13.85.3 : Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.With water thinnable cement primer on walls surface having VOC content less than 50 grams / litre

Cement Putty

13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Emulsion Paint

Finishing with premium emulsion like Asian paints Apcolite premium/Berger rengoli total care or equivalent of approved brand for interiors using primer as per manufacturers specifications:& Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm

Synthetic enamel paint

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Melamine polishing

13.114 : Melamine polishing on wood work (one or more coat).

Wood primer

13.50.1 : Applying priming coat:With ready mixed pink or Grey primer of approved and manufacture on wood work (hard and soft wood)

Miscellaneous Labour

Miscellaneous Labours

Electrical-Supply Part

Supply of cables- UTP/ Ethernet Cat 6 cable, Make : D-Link, Finolex, Polycab, Lapp

Supply of cables-Telephone cable, twin flat copper PVC insulated, 2x0.5mm²,ISI marked, Make:Finolex, Anchor, V-Guard, Traco, Sark, Orbit, Polycab

Light Fixtures and Fans,Switches and Sockets etc

Supply of LED downlight round (165mm dia approx),12W (Approximate),230V, 50Hz AC supply, with spring buckle for concealed false ceiling mounting, Lumen efficacy: 90 Lumens/W or above, Lumens : 810 Lumens or above, THD :15% or less, PF : 0.90 or above, CRI :80 or above, Colour temperature : Cool White (5500-6500K), IP:20 or above, Warranty : Full Warranty of 1 year or above.

Supply of LED downlight round (225 mm dia approx ), 20W (Approximate), 230V, 50Hz AC supply, with spring buckle for concealed false ceiling mounting, Lumen efficacy: 90 Lumens/W or above, Lumens: 1800 Lumens or above, THD: 15% or less, PF: 0.90 or above, CRI: 80 or above, Colour temperature: Cool White(5500-6500K), IP: 20 or above, Warranty: Full warranty of 1 year or above

Supply of 6A switch, for 1 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Supply of 25A switch, for 1 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Supply of 5A-13A multistandard/international Socket, for 2 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Supply of 25A socket, for 2 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Supply of RJ11 socket, for 1 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Supply of RJ45 socket, for 1 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Supply of Fan step regulator, for 2 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Supply of Concealed box, Plate and frame for 2 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Supply of Concealed box, Plate and frame for 3 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Supply of Concealed box, Plate and frame for 9 module, modular, Make: Legrand, Anchor, ABB, Honeywell

Modular Type Wiring

Supply of materials required for copper point wiring for lights, fans in PVC medium gauge conduit with modular type switch – using 1.5 sq. mm. PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq. mm. PVC insulated copper wire as required, complete. (Excluding supply of Fans, Exhaust fans, Lights, concealed mounting boxes, Plates and Frames, Switches, Sockets and Fan regulators) (Approximate 5 meters/point)

Supply of materials required for copper point wiring for lights, fans in PVC medium gauge conduit with modular type switch – using 1.5 sq. mm. PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq. mm. PVC insulated copper wire as required, complete. (Excluding supply of Fans, Exhaust fans, Lights, concealed mounting boxes, Plates and Frames, Switches, Sockets and Fan regulators) for more than 5 meters.

Supply of materials required for copper circuit wiring in PVC conduit-with 2.5 sq.mm. PVC insulated, copper conductor, standard cable in recessed PVC conduit along with 1 no. 2.5 sq. mm. PVC insulated copper wire for loop earthing as required.

Supply of materials required for copper circuit wiring in PVC conduit-with 1.5 sq.mm. PVC insulated, copper conductor, stranded cable in recessed PVC conduit along with 1 no. 1.5 sq. mm. PVC insulated copper wire for loop earthing as required.

Supply of 10 pair telephone junction box and accessories for flush mounting, make: Syntex, Krone

Modular Type Wiring and Installation

Installation, testing and commissioning of LED downlight of all types complete with all accessories etc. in false ceiling including connection with 1.5 sq.mm. PVC insulated copper conductor single core cable etc. as required.

Installation of ceiling fans/wall fans, making connections, testing and commissioning etc. with 1.5 sq.mm. PVC insulated copper conductor single core cable etc. as required.

Installation, testing and commissioning of Smoke Detectors complete with all accessories

Fixing of 6/5-13/16/25 amps modular type sockets, switches, fan step regulators, RJ11 and RJ45 modular sockets with front plate in surface or in recess including providing and fixing suitable size metal box, inter connections etc. required.

Copper point wiring in PVC medium gauge conduit with modular type switch- Wiring for light point /fan point/ exhaust fan point/calling bell/socket point using 1.5 sq.mm. PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq.mm. PVC insulated copper wire as required, with modular type switch with non-metallic inner and outer cover (inner and outer plate) in suitable metal box etc. as required to complete

Copper point wiring in PVC medium gauge conduit with modular type switch- Wiring for light point /fan point/ exhaust fan point/calling bell/socket point using 1.5 sq.mm. PVC insulated copper conductor stranded cable in recessed PVC conduit including loop earthing using 1.5 sq.mm. PVC insulated copper wire as required, with modular type switch with non-metallic inner and outer cover (inner and outer plate) in suitable metal box etc. as required to complete for more than 5 meters.

Copper circuit wiring in PVC conduit-Circuit Wiring with 2.5 sq.mm. PVC insulated, copper conductor, stranded cable in recessed PVC conduit along with 1 no. 2.5 sq.mm. PVC insulated copper wire for loop earthing as required

LAN circuit wiring in PVC conduit- Circuit Wiring with UTP/Ethernet cable in recessed PVC conduit as required

Telephone circuit wiring in PVC conduit-Circuit Wiring two core telephone cable in recessed PVC conduit as required

Concealing of existing cables and conduits, including conduit wherever required

Duplex (Zebra) roller blinds

Providing & Fixing the Duplex (Zebra) roller blinds of brands of Mac,marvel,Vista or other approved brands and colour, design, size etc. The Duplex (Zebra) blind shall filters the light into the room using two phase system that switches opaque to sheer. The blind shall be operated via a chain system, strip of dim out & sheer fabrics shall be aligned to form a full sheer blind,a full dim out blind or a mixture of two. The detailed specification of the Duplex (Zebra) blind shall be Fabric:100% polyester plain/ribbed fabric of approved colour/shade. Pattern: Repeat pattern 8-15 cms solid 5- 10 cms sheer. Hardware: Control Unit:Made up of high strength reinforced plastic and clutch shall be of wrap spring design. High carbon steel spring shall be provided to transmit motion from driving to driven members of clutch mechanism & shall be operated by endless beaded chain. Idler: Idler shall be made up of high strength reinforced plastic consisting of a centre shaft, it is mounted on the bracket by using a plastic lock. The metal sleeve inside the plastic lock shall provide bearing surface for the centre shaft which rotates freely, providing smooth, quite & long wearing operation. Head Rail: It shall be made up of extruded aluminium, powder coated. Control unit & Idler shall be mounted on the head rail with powder coated MS brackets. Roller Tube:It shall be made up of extended high strength aluminium anodized alloy, control unit & Idler shall befixed to the either ends of the tube. The fabric of the blind is fitted to the tube with heavy duty adhesive tape. Bottom rail: It shall be made up of round or triangular extruded aluminium section,and connected using high quality transparent/coloured end caps through which the fabric runs Operating Chain: It shall be an endless chain made up of 4-5 mm plastic beads moulded on 2-3 mm thick polyester chord with pitch of beads 5-7 mm. The chain&drives the sprockets of the control unit to close or open the blind. Installation: The Duplex (Zebra) roller blind shall be installed on brackets & clamps fixed over the wall or ceiling. The brackets & clamps shall be made up of high strength alloy or zinc plated mild steel.

P T JAYAPAL

Bidder Name

P T JAYAPAL

M ABDULSHUKKOOR