Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.1 LAdmitted-Finance 202 1ST FLOOR VIVEKANAND PURI MALKAGANJ SARAI ROHILLA NORTH DELHI DELHI 110007 UDYAM DL 01 0065084 | NORTH DELHI | DELHI | 110007 | L1 | Admitted-Finance | |
| 2 | L2₹9.2 L+₹19,116 (2.11%)Admitted-Finance PROP NO A 80 FIRST FLOOR FLAT NO 3 CHATTAR PUR ENCLAVE PHASE 2 NEW DELHI SOUTH WEST DELHI DELHI 110074 | SOUTH DELHI | DELHI | 110074 | L2 | Admitted-Finance | |
| 3 | L3₹9.3 L+₹26,078 (2.88%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | Rejected-Technical | - | Rejected-Technical Due to not full fill the term and condition of NIT |
| Sl No | Description | Qty | Unit | M G Traders and Engineers L2 | Volts And Watts Electronics Pvt. ltd. L3 | MITTAL TRADING COMPANY L1 |
|---|---|---|---|---|---|---|
| 1.01 | Repairing of Detroiter No.2 by carrying out the following works: - Isolation of classifier from the hydraulic process by closing sluice gate and providing gunny bags to prevent access of influent. Dewatering the chamber with the help of submersible pump and cleaning including removal of silt and floating material etc. | 1 | Job | 36,000 ₹42,480 | 35,200 ₹41,536 | 33,000 ₹38,940 Lowest |
| 1.02 | Dismantling of complete Detroiter after cutting the fasteners with gas cutter & manual labours & shifting the same from the site. | 1 | Job | 20,500 ₹24,190 Lowest | 20,500 ₹24,190 Lowest | 21,000 ₹24,780 |
| 1.03 | Overhauling of centre turn table after providing the temporary structure to lift the drive head gear, repairing of drive head gear including remitting and grinding the inside colour, checking the trueness and greasing/ oiling the same as required. | 1 | Job | 50,000 ₹59,000 | 48,500 ₹57,230 | 47,000 ₹55,460 Lowest |
| 1.04 | Fabrication and Supply and Fixing of M.S. squeezer blades made out of M.S. angle of size 65x65x6mm & M.S. sheet of size 1 mtr. Long x 150mm app. and 8mm thick rubber squeezer of 100% synthetic rubber and fixing with nut & bolt i/c drilling hole as per sample (600 kg approx.) | 1 | Job | 72,500 ₹85,550 | 72,500 ₹85,550 | 70,000 ₹82,600 Lowest |
| 1.05 | Repairing the main worm shaft including machining the shaft, replacement of bushes and bearing No. 1313 K.Make: SKF/FAG/ DJB Approved make | 1 | Job | 10,000 ₹11,800 Lowest | 10,200 ₹12,036 | 10,000 ₹11,800 Lowest |
| 1.06 | Repair of Detroiter arms i/c replacement of damaged portion of the structure as per sample and compete in all respect, using MS channel 100x 50 mm & angle iron of existing size (350 kg approx.) | 1 | Job | 42,700 ₹50,386 | 42,500 ₹50,150 | 40,000 ₹47,200 Lowest |
| 1.07 | Providing/Fixing the M.S. chequrred sheet 1200mm wide, 12mtr length and 8 mm thick for the walkway of the main Detroiter the job i/c strengthening the complete structure with the different size angle iron as per site requirement. (900 approx. kg) | 1 | Job | 1,10,000 ₹1,29,800 | 1,08,500 ₹1,28,030 Lowest | 1,10,000 ₹1,29,800 |
| 1.08 | Painting of complete Detroiter by scrapping of rust from the structure. Painting with red oxide epoxy paint of underwater portion & upper portion painted with enamel paint with two coats of epoxy paint. | 1 | Job | 15,500 ₹18,290 | 15,500 ₹18,290 | 14,500 ₹17,110 Lowest |
| 1.09 | Civil work of damaged foundation after removing of old channel & fixing of new. | 1 | Job | 6,600 ₹7,788 | 6,700 ₹7,906 | 6,200 ₹7,316 Lowest |
| 1.10 | Repairing of pipe safety guard at inlet chamber of 16 MGD, STP by carrying out the work as under: - Dismantling the old existing worn-out pipe railing from the inlet chamber by cutting the old rusted nut bolt and shifting to the old material stock yard with suitable man power as per requirement at site. | 1 | Job | 10,500 ₹12,390 | 10,200 ₹12,036 | 10,000 ₹11,800 Lowest |
Tender Value
Refer Docs
EMD Value
₹14,500
Closing Date
12 Aug 2025, 12:00 pmClosed
EXECUTIVE ENGINEER (SDW) II
S.T.P. OKHLA MATHURA ROAD NEW DELHI
Repairing of Grit No. 2 and other allied works at 16 MGD STP Okhla.
2025_DJB_276459_1
NIT No-02 EE (SDW) II/ (25-26)-7
Open Tender
Electrical Works
Works
45 days
S.T.P. OKHLA MATHURA ROAD NEW DELHI
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
A/c.50448339804
₹14,500
30 Aug 2025
5 Aug 2025
12 Aug 2025
5 Aug 2025
12 Aug 2025
5 Aug 2025
Repairing of Detroiter No.2 by carrying out the following works: - Isolation of classifier from the hydraulic process by closing sluice gate and providing gunny bags to prevent access of influent. Dewatering the chamber with the help of submersible pump and cleaning including removal of silt and floating material etc.
Dismantling of complete Detroiter after cutting the fasteners with gas cutter & manual labours & shifting the same from the site.
Overhauling of centre turn table after providing the temporary structure to lift the drive head gear, repairing of drive head gear including remitting and grinding the inside colour, checking the trueness and greasing/ oiling the same as required.
Fabrication and Supply and Fixing of M.S. squeezer blades made out of M.S. angle of size 65x65x6mm & M.S. sheet of size 1 mtr. Long x 150mm app. and 8mm thick rubber squeezer of 100% synthetic rubber and fixing with nut & bolt i/c drilling hole as per sample (600 kg approx.)
Repairing the main worm shaft including machining the shaft, replacement of bushes and bearing No. 1313 K.Make: SKF/FAG/ DJB Approved make
Repair of Detroiter arms i/c replacement of damaged portion of the structure as per sample and compete in all respect, using MS channel 100x 50 mm & angle iron of existing size (350 kg approx.)
Providing/Fixing the M.S. chequrred sheet 1200mm wide, 12mtr length and 8 mm thick for the walkway of the main Detroiter the job i/c strengthening the complete structure with the different size angle iron as per site requirement. (900 approx. kg)
Painting of complete Detroiter by scrapping of rust from the structure. Painting with red oxide epoxy paint of underwater portion & upper portion painted with enamel paint with two coats of epoxy paint.
Civil work of damaged foundation after removing of old channel & fixing of new.
Repairing of pipe safety guard at inlet chamber of 16 MGD, STP by carrying out the work as under: - Dismantling the old existing worn-out pipe railing from the inlet chamber by cutting the old rusted nut bolt and shifting to the old material stock yard with suitable man power as per requirement at site.
Providing of M.S. heavy duty 40 NB pipe as the horizontal Member of safety railing at inlet chamber.
Fabrication/ supply of M.S. vertical post of M.S. angle size 50 x 50 x 6 mm with the provision of bottom plate for grouting at site as per requirement.
Fixing the vertical post at site with proper fasteners/ nut bolt including civil work as per site requirement.
Fixing the horizontal pipe on the vertical post including the work cutting/ welding etc. as per requirement.
Painting the pipes railing after proper cleaning with one coat of epoxy primer and two coat of epoxy paint.
Repairing of Rake Classifier No.2 at 16 MGD, STP at Okhla by carrying out the following works: - Dismantling of complete structure of classifier from the pit channel with the help of heavy labour, cutting the Nut Bolt with the help of Gas cutter, cutting the frame of the main arm. Removing & shifting to the workable place.
Providing set of Guide Shaft & Pins fabricated as per sample in terms of shape, size, i/c machining the pins as per bush size.
Replacement the set of GM Bushes both end collared. The job i/c providing the new bushes with, centre/ pins as per manufacturers standard in terms of size & finishing as per shaft (16 Nos.).
Repairing of main crank shaft fabricated as per sample in respect of MOC and size having 4500mm length with Gun metal ring OD 300mm ID-260mm as per sample i/c cross support.
Fabrication and fixing of brackets by casting as per site requirement in respect of size and MOC. (400 kg)
Providing the new scraper assembly having new scrapers. 95 NOS made out of M.S. flat size 65mmx8mm. Length of each scraper will be 610mm. Fixing the scrapers on the structure made out from channel size 150x70x6mm as per M/standard to hold & support the scrapers. (557 kg approx.)
Providing the nut bolts of different size and hardware goods for the fixing of complete structure on site.
Painting of complete rake classifier by scrapping of rust from the structure. Painting with red oxide epoxy paint of underwater portion & upper portion painted with enamel paint with two coats of epoxy paint.
Testing and commissioning of classifier system after general servicing of starter, Motor, making electric connection and testing of the same on load at site.
M G Traders and Engineers (BID ID -1611108)
Volts And Watts Electronics Pvt. ltd. (BID ID -1611127)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .