CERTAIN REPAIR MAINT OF SWTs HARDSTANDING AND OTHER MISC WORKS UNDER AGE BR-II AT AFS JODHPUR

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing the demolished material or debries out side MoD land complete all as specified & directed by the Engineer-in-Charge.

Cleaning of SWT of plan area exc 20 Sqm but not exc 100 Sqm and depth upto 3.50 m by taking out sludge and sludge loading to the cart/ lorry & depositing out side MD land including bailing out water by manually or by any mechanical means all as specified and directed by Engr-in-Charge. Note:- (i) Rate quoted includes bailing out water from SWT and removing sludge depositing out side MD land.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete precast concrete block walling complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engr-in - Charge.

Taking down cement plaster on block masonary or concrete surfaces including raking out joints,hacking for key,scrubbing down with water etc. all as specified and as directed.

Supply and fixing in repairs bird proof net in patch work of size not exceeding 1 sqm each, at any location and at any height, with bird proof net of co-polymer nylon monofilament, ultraviolet stabilized with apertute 20mm x 20mm, the thickness of filament is 0.80 mm, melting point 260 degree, tension force can resist 23.08 kgs, dia of nylon thread not less than 1.25 mm fixed in position as per manufacturer's instructions including dismantling old existing destroyed unserviceable nylon deteriorated net at any height in ceiling including making good the disturbed surface complete all as specified and as directed by the Engineer-in-Charge. Note :- Quoted rates shall be deemed to be included for working in building/structure of upto 10 metre height.

Material and labour for oiling and greasing top and bottom pullies of each steel sliding hanger door shutter (each panel), cleaning with using standard thinner such as carbon tetra chloride/ Benzene and making smooth functioning to reduce the friction of door and make the door functional to the entire satisfaction of Engineer-in-Charge. Note :- Quoted rates shall deemed to be included for working in building/structure of any height.

Supply and fixing in repairs gear box of steel rolling shutter Including handle rack & pinion system, bearing etc of rolling shuter size exceeding 5 Sqm but not exceeding 25 sqm each complete all as specified & directed by Engineer-in-Charge.

M&L for 2.0 mm thick PVC tiles/ sheets, laminated plain coloured, homogeneous finish, laid with approved rubber based adhesive in floors including removing of old sheets from site complete all as specified and directed

Dismantling of Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed

M&L for squared rubble walling, Jodhpur type, brought up to courses, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

Precast cement concrete 1:3:6 type C1 (Using 20 mm graded stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified including demolition and as directed by the Engr-in - Charge.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in cills, steps, bands, copings, bed plates, blocks for inserting hold fasts etc. and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed by Engr-in-Charge .

M&L for 15 mm thick rendering in cement mortar 1:4 or fair faces of brick or cement concrete surfaces finished even and smooth without using extra cement complete all as specifed and as directed.

S&F in repair for powder coated GI grid frame work of Silhouette grooved design for false ceiling fixed with screw suspended with 6mm dia GI (upto 1200 mm length) adjustign level fixed to roof slabs by means of ceiling cleates made out of GI flat 40 x 3 mm size 60mm long complete all as specified and as directed

S&F for 5-6 mm thick PVC ceiling board fixed in flat surfaces on snap grid frame work including complete all as specified and directed

M&L for 35 to 40 mm thick precast RCC Jallies of type B-0 (using 12.5 mm graded aggregate) of pattern as approved including precast frame , balusters, bressumers, kneelers, string courses fixing in any position with CM 1:4 with demolition of old jallies and thrown outside MD land complete all as specified and directed

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M&L for stone jalli of 40-50 mm thick in any size and of approved shape and design with asthetic view including pilles/frames/posts (thumbly) complete all as specified and directed Note:- Measuremet shall be carried out including post/frame and up to Jalli height.

M&L for preparation of surface and finishing with two coat of Acrylic Smooth exterior paint with required shade over a coat of primer complete all as specified and directed

Supply only integral water proofing compound

M&L for preparation of new surfaces of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete etc complete all as specified.

M&L for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregates as in floor, hardstanding complete all as specified and directed

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate in sub floors complete all as specified and as directed by the Engr-in - Charge.

M & L for Factory made Vitrified heavy Duty parking tiles coloured, matt finish,unglazed and unpolished of size 300x300x10mm thick including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed by Engr-in-Charge.

M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub base complete all as specified and as directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor/edge of floor etc complete all as specified and directed

M&L for preparation of new concrete surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint (ordinary tint) complete all as specified and as directed.

S&F for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete all as specified and directed

S&F for rolled mild steel work Fe 290 (Gde E-165 ) Rolled sections as in main and cross beams, hip and jack rafters; purlins, Post etc where connected to common rafters and running rails and guides for sliding doors; sheets, fixed with angle cleats or other connecting plates complete all as specified and directed by Engr-in-Charge

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 including dismanting complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise discribed, and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

S&F for rotational moulded polyethylene water storage tanks of 5000 ltrs capacity (cylindrical vertical with closed top) three layer construction hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule and GI light fitting over flow pipe including taking down old unserviceable water tank of any capacity and removing from site complete all as specifed and directed.

Dismantling of old unserviceable, rusted, broken (corrugated/semi corrugated, etc.) asbestos cement sheets in ridge and roof coverings complete all as specified and as directed by the Engineer-in-Charge.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repair for PVC coated galvanised iron chain link fencing, made of GI wire dia not less than 3 mm and minimum dia 4 mm after PVC coating, having 50 mm x 50 mm mesh size including line wire, any type of standards, rails, straining bolts, etc including provision of binding wire, fixed as knuckled type complete all as specified and directed by the Engr-in-Charge

Keystone Constructionare (BID ID -3214033)

GB Group & Co (BID ID -3221984)

KALWA TRANSPORTER AND SUPPLIERS (BID ID -3212575)

VIKAS CONSTRUCTION CO. (BID ID -3216116)

Savitri Enterprises (BID ID -3222186)