Loading…
Loading…
Tender Value
₹39.6 L
EMD Value
₹79,240
Closing Date
30 Sept 2026, 6:00 pm
Garrison Engineer Utility-I
Visakhapatnam
PROVISION OF EXTERNAL ELECTRIC SUPPLY TO VARIOUS INFRASTRUCTURE DEVELOPMENT AT DOLPHIN HILLS UNDER AGE E/M NO-III OF GE (U-I) VISAKHAPATNAM
2026_MES_788559_1
8915/E8
Open Tender
Electrical and Maintenance Works
Item Rate
Garrison Engineer Utility-I Near Samudrika Naval B
As per NIT
7 documents required · 7 mandatory
₹500
Garrison Engineer Utility-I
₹79,240
Yes
9 Sept 2026
9 Sept 2026
3 Oct 2026
9 Sept 2026
30 Sept 2026
24 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying, Installing, Testing & Commissioning of Transformer, Step Down, Outdoor Type, 11 KV / 433 V [at No load], AC, 3 Phase, 50 Hz, of 250 KVA capacity, Double Copper Wound, Oil immersed, CRGO Core type Naturally cooled, Built-up with class "A" insulation, designed & constructed with particular reference to Tropical Condition, conforming to IS 1180 [Part-1], Level-3 with latest amendment complete all as specified and as directed and comprising of the following Specification and Fittings (Specified in 1.01 & 1.02):
Continuous Rating : 250 KVA
No-Load Voltage Ratio : 11 KV/433 V
Tapping on HV [%] : ±7.5, ± 5, ±2.5
Phase & Frequency : 3 Phase & 50 Hz
Connection : Delta Star
Vector Group : DYN 11
Cooling : ONAN
Type : Outdoor with HV / LV cable Box
(Contd...) | 1 | Each Job | - | - |
| 1.01 | (Contd...)
Fittings:
[ a] Externally hand operated Off-Circuit Tap Switch with position indicator and locking device.
[b] Conservator with Oil Gauge, filling hole with plug & drain hole with plug
[c] Undercarriage with four plain rollers
[d] Oil filling hole cum air release plug
[e] Top Filter Valve with Plug
[f] Drain Valve cum Sampling Valve
[g] Rating Plate with Diagram Plate
[h] Lifting lugs for Transformer
[j] Lifting lugs for Core
[k] Earthing Terminals
[l] Thermometer Pockets
[m] Silica Gel Breather
[n] Explosion Vent
[o] Double Float Buchholz with alarm and trip contacts including control cable of copper conductor of size & length from Marshalling Box to Relay of VCB
[p] 150mm size Oil Temperature indicator, dial type with alarm and trip contacts
[q] 150mm size Winding Temperature indicator, dial type with alarm and trip contacts
[r] Buchholz Relay with 2 Shut-Off Valves
[s] Marshalling Box with Double Window
(contd...) | - | - | - | - |
| 1.02 | (Contd...)
Terminal Arrangement:
[i] HV & LV Side: Cable Box
[ii] Quad furcating cable box with five compression glands for PVC Cable and One additional neutral terminal shall be brought out separately for earthing purpose on LV Side
[iii] First filling of new and unused Transformer Oil [IS-335 Marked], filtered and tested up to 60KV dielectric strength at 2.5mm air gap between testing electrodes. Certification of dielectric strength shall be submitted by the Contractor after filling the oil.
[iv] Apart from routine tests mentioned in these tender documents and relevant IS, pre-commissioning inspection of Transformer shall be carried out by Senior Electrical Inspector/Electrical Inspector.
[v] All necessary arrangements with devices for measuring the temperature of core winding and oil
[vi] The drawings of the transformer should be approved by the accepting officer before placing order.
[vii] Factory Acceptance test to be done by the rep of accepting officer before shipment of the Transformer | - | - | - | - |
| 2 | Supply, laying, connecting and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured. HT electric power cables (heavy duty) 11000 Volts grade (Earth Grade) with stranded aluminium conductor of size 95 Sqmm x 3 core complete all as specified and directed by Engr-in-charge. | 300 | RM | - | - |
| 3 | S & F Cable jointing kit for 11 KV grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 95 Sqmm complete all as specified and directed by Engr-in-charge. | 2 | Each | - | - |
| 4 | Supply and laying un-reinforced precast concrete cable cover, class HV, Type 1, flat, size 300mm x 180mm x 40mm, laid as protection to cable in trenches complete all as specified and directed by Engr-in-charge. | 1,556 | Each | - | - |
| 5 | Supply & laying LT XLPE insulated armoured, heavy duty electric power cables with aluminium conductor, 1100 Volts grade, cross sectional Area 300 Sqmm x 3.5 Core laid in trenches/ducts/ on wall / passing through pipe etc complete all as specified and directed. | 25 | RM | - | - |
| 6 | All as per Sl. Item No. 5.00 here in before but for cable of size 120 sqmm x 3.5 Core | 80 | RM | - | - |
| 7 | All as per Sl. Item No. 5.00 here in before but for cable of size 95 sqmm x 3.5 Core | 150 | RM | - | - |
| 8 | All as per Sl. Item No. 5.00 here in before but for cable of size 35 sqmm x 3.5 Core | 120 | RM | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.45 MB
8915Tender.pdf
Tender Documents • 0.84 MB
BOQ_883908.xls
BOQ • 1.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .