DAY TO DAY B/R MAINTENACE AT DGNP MAIN OFFICE, EQUIPMENT OFFICE AND CWE (Wks) 1 and 2 (DOCKYARD), DG HOUSE AND CERTAIN AREAS UNDER DGNP(V).

Amount

Note for Serial Item No. 2.00 to 71.00: The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account.:- (i) The bidder shall note that Contractor or his authorised representative will attend the Complaint Cell at Old Complex of DGNP(V) daily at 0900 hrs, receive the complaints and arrange the skilled/semi-skilled worker i.e. Carpenter, mason, welder, Safaiwala and plumber alongwith one unskilled helper with requsite tools & plants as per the complaints. (ii) The repairs shall be done by the skilled workman in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progess of work shall not be hampered due to non availability of labour at any time. The required item which need to be replaced as per complaints/repair be supplied under respective items. The bidder shall note that the qty entered under Qty column against the item is for guidance only, the qty may be varried as per scope of complaints / site requirements.

Note for Serial Item No. 2.00 to 71.00 (Contd....) (iii) The contractor or his authorised supervisor on getting information through Site order/Works diary regarding the nature of repair to be carried out, he shall imidiately respond to the same and make all out efforts to carry out the same on priority within 72 hours. In case of any delay in responding/attending the repairs within 72 hours, the GE may at his absolute discretion impose penalty on the contractor at Rs. 150/- per day per each work ordered upto 05(five) days and Rs. 250/- per day thereafter till completion of the work in case of delay without valid reasons as decided by the GE. (iv) Further, the above penalty is applicable even for the multiple locations of work at the same period. It is the responsibility of the contractor to make suitable arrangements for attending the repairs simultaneously at all places. (v) In case the contractor or his authorised supervisor fails to attend the office of the Engineer-in-Charge as per the time frame given here-in-before, an recovery shall be made @Rs. 1000/- per day. (vi) The decision of the GE as to whether a particular repair has been attended or not on a particular day will be final and binding. The above penalty shall be addition to the provisions made in condition 50 of IAFW-2249 i.e. (Compensation for delay in completion of work). Note:- Tenderer/bidders are advised to visit the site and quote their rate accordingly and no claim whatsoever in this regard shall be admissible at any later satge.

Supply and fixing in repair bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed.

Supply and fixing in repair bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

Supply and fixing in repair 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, complete all as specified and directed.

Supply and fixing in repair chromium plated brass angle valve for 15mm bore pipe, complete all as specified and directed.

Supply and fixing in repair two way chromium plated brass angle valve cock fancy type for 15mm mm bore pipe, complete all as specified and directed.

Supply and fixing in repair rubber door seal 32 mm wide with aluminium strip of size 19mm wide fixed with machine steel with washer complete all as specified and directed.

Supply and fixing in repair chromium plated brass shower rose 75 mm dia with arm swivel joints, as per sample kept in GE's office complete all as specified and directed.

Supply and fixing in repair pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed.

Supply and fixing in repair PVC low level flushing cistern 10 ltr capacity, valve less, symphonic action type with inlet, ball valve float and handle including bracket and flush pipe 32 mm dia, complete all as specified and directed.

Supply and fixing in repair PVC flush pipe 32 mm dia, for low level flushing cistern complete all as specified and directed.

Supply and fixing in repair plastic water closet seat cover black/white premium quality of pattern including fixing divice and chromium plated nuts complete all as specified and directed.

Supply and fixing in repair vitreous china wash-down water closet pan & trap (pedestal pattern) with plastic water closet seat black closet pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device with flush pipe to pedestal pan including all joints including connection to drain pipe and flush pipe, complete all as specified and directed.

Supply and fixing in repair wash down water closet Orissa pattern of size 580x440mm white with integral footrest and trap, including connection to drain and to flushing pipe with and including cost of making good to floor and flush pipe and joint between flushing pipe and sockets of water closet pan, complete all as specified and directed.

Supply and fixing in repair, PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts complete all as specified and directed.

Supply & fixing in repairs grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40 gms) with and including white cement, complete all as specified and directed.

Supply and fixing in repair PVC waste pipe 32 mm dia, 60 cm long for wash hand basin with cup, complete all as specified and directed.

Supply and fixing in repair PVC waste pipe 40 mm dia, 60 cm long for sink with cup, complete all as specified and directed.

Supply and fixing in repair stainless steel waste coupling for stainless steel sink 32 mm to 40mm dia set with rubber washer plug all as specified and directed.

Supply and fixing in repair sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long, complete all as specified and directed.

Supply and fixing in repair aluminium anodised handles of extruded section 125 mm long complete all as specified and directed.

Supply and fixing in repair aluminum, anodized, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

Supply and fixing in repair aluminum, anodized, barrel tower bolts of extruded section 100 mm long complete all as specified and directed.

Supply and fixing in repair aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

Supply and fixing in repair butt hinges, medium weight, cold rolled mild steel 100mm size fixed with necessary screw or welding as required, complete all as specified and directed .

Supply and fixing in repair butt hinges medium weight, cold rolled mild steel 75mm size fixed with necessary screw or welding as required, complete all as specified and directed.

Supply and fixing in repair 150mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fixing in repair aluminium door closer (Die cast body) for aluminium door size 6000x 1100mm envoronment conditions accessibility to closer arm space limitations on the top rail of door closer position, complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin, white flat back size 550 x 400 mm excluding chain and plug and porcelain stopper but including brackets all as specified & directed including 32 mm bore CP based fittings and PVC waste pipe suitable for 32mm bore complete all as specified and directed.

Supply and fixing in repair aluminum, anodized, hasp and staple safety type 125 mm size complete all as specified and directed.

Supply and fixing in repair 250 mm mild steel sliding door bolts, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts complete all as specified and directed.

Supply and fixing in repair aluminium , barrel tower bolts 200 mm long complete all as specified and directed.

Supply and fixing in repair aluminium handle caste type anodized 150mm long size complete all as specified and directed.

Supply and fixing in repair aluminium handle caste type anodized 125mm long size complete all as specified and directed.

Supply and fixing in repair galvanised aluminium wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm, fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Supply and fixing in repair sheet glass 3 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Supply and fixing in repair figured glass 3 mm thick pin head type and glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing in repair tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fixing in repair 150 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

Supply and fixing in repair 25 mm dia mild steel PVC coating desinger drapry/ curtain rod complete all as specified and directed.

Supply and fixing in repair mild steel PVC coating bracket/ holder for drapry rod fixed with screws complete all as specified and directed. (Design and colour approved by GE)

Supply and fixing in repair 2nd class hard wood beads sectional area n.exc 3 Sqcm for glazed or gauged Joinery, ceiling including secured with nails all as specified and directed.

Supply and fixing in repair for block board 18/19 mm thick, grade 2 quality, interior grade, commercial type, fixed with nails/screws in cup board shutter/pelmets etc. or to timber frame work complete all as specified and directed.

Supply and fixing in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and directed.

Supply and fixing in repair PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls 110mm bore fixed complete all as specified and directed.

Supply and fixing in repair PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed.

Supply and fixing in repair fixing mild steel brackets of 35 x 35 x 5 mm of 45 cm long with and including cutting holes in wall and fixed with cement concrete 1:2:4 and making good facing complete all as specified and directed.

Material and labour for filling gap in between sanitary fittings along with floor / wall finishes with and including white cement complete all as spesified and directed.

Supply and fixing in repair chromium plated brass toilet paper holder, superior quality complete all as specified and directed.

Supply and fixing in repair chromium plated brass, soap dish, superior quality complete all as specified and directed.

Supply and fixing in repair stainless steel sink 1.00 mm thick with drainage board for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm all as specified and directed.

Supply and fixing in repair stainless steel sink 1.00 mm thick for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Supply and fixing in repair brass pad Lock, 6 lever of size 150 mm suitable for Aluminum doors complete all as specified and directed.

Taking down aluminium shutters of any description exceeding 1 Sqm and not exceeding 2.50 Sqm each and refixing in the same opening after easing and adjusting including refixing butt hinges/tower boalt as required and renewal of unserviceable screws all as specified and directed.

Supply and fixing in repair PVC mirror cabinet, coloured of size 300 x 450 mm fixed with screw and PVC gutty on wall complete all as specified and directed. Make: Prayag Cat part No : 551 or equvilent model of make as approved.

Supply and fixing in repair 18mm thick both side pre laminated board MDF of any colour, matt surface finish, grade I as per IS 14587, for frame and shutter for kitchen cabinets, complete all as specified and directed.

Supply and fixing in repair Ist class hard wood external teak wood leaping, 6mm thick to 18-19 mm thick block board or veneered particle board, fixed with nails complete all as specified and directed.

Supply and fixing in repair 2nd class hard wood(Sal) plain fillets square, rectangular or triangular in section clean swan secured with nails or brads sectional area exc 6 and not exc 13 sq cm complete all as specified and directed

Supply and fixing in repair 2nd class hard wood (Sal) plain fillets square rectangular or triangular in section clean swan secured with nails or brads sectional area exc 13 but not exc 25 sq cm complete all as specified and directed

Supply and fixing in repair continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm complete all as specified and directed.

Supply and fixing in repair magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed.

Supply and fixing in repair 100 mm long handles, anodised aluminium aloy, fixed with screw complete all as specified and directed.

Supply and fixing in repair ply wood, 6 mm thick, 5 ply, grade BWP, type BB, fixed with screws to timber frame work complete all as specified and directed.

Supply and fixing in repair telescopic channel/slider, 450mm long extruded MS galvanised over rollers of approved make complete all as specified and directed.

Supply & fixing in repairs 500 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top), triple layered, hoisted and fixed in position including tank nipple , complete all as specified and directed.

Supply & fixing in repairs 1000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top), triple layered, hoisted and fixed in position including tank nipple , complete all as specified and directed.

Supply & fixing in repairs 2000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top), triple layered, hoisted and fixed in position including tank nipple , complete all as specified and directed.

Supply & fixing in repairs, PVC Tanks Lid suitable for rotational moulded polyethene water storage tanks of capacity 500/1000/2000 letre, complete all as specified and directed.

S&F in repairs ball valves 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) as fixed in repair

Supplying and laying in repairs on floor and wall of 25 mm outer dia mm CPVC pipes SDR 11 &Plain CPVC SDR 11 including fittings, clams, gum complete all as specified and directed.

Supplying and laying in repairs on floor and wall of 32 mm outer dia mm CPVC pipes SDR 11 &Plain CPVC SDR 11 including fittings, clams, gum complete all as specified and directed.

Note for Item No. 73.00, 74.00 & 75.00 :- The rates quoted by the tenderer shall deemed to be inclusive for the following provisions in addition to the other conditions specified in the tender documents. No claim whatsoever shall be entertained at a later date on this account.:- (i) The bidder shall note that Contractor or his authorised representative will attend the Complaint Cell at Old Complex of DGNP(V) daily at 0900 hrs, receive the complaints and arrange the skilled/semi-skilled worker within 24 hours i.e. Carpenter, mason and plumber alongwith one unskilled helper with requsite tools & plants as per Item No. 73.00 to 75.00. (ii) The workers engaged under Item No. 73.00 to 75.00 will attend complaints, repair and required item will supply under Item No. 76.00 to 88.00 only. Only record will be maintained for output of the deployed persons. (iii) The repairs shall be done by the skilled workman in the relevant field to the entire satisfaction of Engineer-in-Charge. The contractor shall engage sufficient manpower for the entire period so that progess of work shall not be hampered due to non availability of labour at any time. The bidder shall accordingly quote his rate under Item No. 73.00 to 75.00. The required item which need to be replaced as per complaints/repair be supplied under respective items. The bidder shall note that the qty of supply entered under Qty column against the item is for guidance only, the qty may be varried as per scope of complaints / site requirements. The provision of note Srl Item No. 1.02 (iii) to 1.02(vi) shall also be applicable on these items.

Empolying one plumber and one helper for plumbing & sanitary works on all working day from 0900 Hrs to 1700 Hrs in above area of GE Wks - I with all plumbing smart tools as requied at site all as specified and directed

Empolying one carpenter and one helper for aluminium Joinery & carpentry works on all working day from 0900 Hrs to 1700 Hrs in above area of GE Wks - I with all necessary smart tools as requied at site all as specified and directed

Empolying one Mason and one helper for repairs of cement works any type on all working day from 0900 Hrs to 1700 Hrs in above area of GE Wks - I with all necessary smart tools as requied at site all as specified and directed

Supply only India rubber washers for pillar taps for size of valve 20mm and under etc.

Supply only PVC flushing cistern 10 ltr capacity, valveless, suphonic action type, low level, white with inlet ball valve float and handle including bracket all as specified and directed.

Supply only PVC flush pipe 32 mm dia, for low level flushing cistern all as specified and directed.

Supply only health faucet (ABS body) mild steel chromium plated suitable for 15mm bore pipe including flexible stainless steel pipe 1.25m long and ABS wall hook including brass nuts for EWC all as specified and directed.

Supply only CPVC solvent cement ultra strong for PVC(SWR)/CPVC and UPVC Pipes.

Supply only alluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

Supply only MS Mortice lock verticle type with two levers

Supply only nails & screws all size as per site requirement.

Supply only 15mm dia spindles.

Supply only ordinary Portland Cement grade 53 OPC, 50 Kg cement in each bag.

Supply only crushed stone aggregate upto 20 mm graded.

Supply only sand for rendering and concrete work.

MAHIRA ENGINEERING & INFRASTRUCTURE (BID ID -3080576)

SRI DHANESWARI ENGINEERING WORKS (BID ID -3081051)

SRI LAKSHMI GANAPATHI CONSTRUCTIONS (BID ID -3077934)

M/S REAL POWER SYSTEMS (BID ID -3082771)