07 /EE/PMD/PHED OF 2024-2025/SL5

Amount

Supply & delivery of automatlc plunger type chlorinator for feeding accurately automatic controlled dosage of chlorine solution lnto the water by connecting of metenng pump with flow rate of water 0 -100 LPH with maximum Pressure of 10 kg/ cm2- suitabie dosing Pump and other necessary acceseeories on the delivery pipe iine as required. The pump shall be coupled with 1/2 hp motor having 3 phase power and 1440 RPM(+- 4%) [Make of Machine. As Per attached vendor iist of PHED] (1W +1S)(In existing old pump house) N.B. : 1) Test Certificate & Guarantee certificate of pump & motor needed.

S&D and Installation of DOL Pump controller starter, suitable for 1 HP motor in sheet steel encl 415V, 3 phase. Make- PHED approved make ( for existing P.H )

Installation and commissioning of above supplied Chlorinator with all accessories, PVC tank and drawing of power line as per IE rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation [at least 200mm height] with concrete mixture [sand, cement, stonechips] and neat cement finish by supplying of all required materials and testing the entire set as per direction of EIC. 1) All works should be carried out as per relevent & latest IS code.

Supply delivery at site 500 litre capacity, P.V.C. water storage tank of approved make with closed top with lid (Black) - Multilayer

Supply & delivery at site 15 mm dia PVC flexible pipe

Supply of Chlorinated Polyvinyl Chloride (CPVC ) pipe fittings conforming to IS-15778: 2007 Tank connecting nipple . a)32 mm dia (for drain pipe)

b)25 mm dia (for water inlet to tank)

c) 20 mm dia (for pump suction line)

Supplying, fitting and fixing of 32 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying, fitting and fixing of 25 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying, fitting and fixing of 15 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying,fitting and fixing 25 mm dia check valve (horizontal) G.M. tested to 21 kg per sq. cm. 25 mm.

Supplying,fitting and fixing a) GM NRV (15 mm)

b) PVC Ball Float valve (25 mm)

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778:2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-I a) 25 mm dia (inlet from delivery line to tank)

b) 15 mm dia (inlet from delivery line to tank)

c) 32 mm dia (Drain line)

Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials. With 1200 mm.dia. well

Supply & Delivery at site 7 mtr. Conical/ Cylindrical GRP street light pole made by CNC filament machine using Thermoset resin having minimum 65% glass containt in one piece with straight non decorative GRP single arm of 1000 mm and internal junction box (6A SP MCB & 4 way connector). Top 85 ±2mm ID and bottom 176 ±2mm ID.

Construction of RCC foundation volume not less than 0.4 cum in portion 4:2:1 and Ø10 and Ø8 TOR including provision of cable entry in Pole junction box and neatly cemented finish (3mm thick) above ground level.

Erection of 7 mtr pole on RCC foundation.

Supply & delivery 60 watt LED fixture with IP66 protection, PDC housing with finless design and polycarbonate cover (IK08). Make- PHED Approved Make

Supply and delivery at site of 1.1 KV grade 2 core 6 sq.mm XLPE insulated Al. Ar. Cable Conforming to IS:7098(Part-I) 1988. Make- PHED Approved Make

Laying of one No. cable of 1.1 KV grade 2 core 6 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable of 1.1 KV grade 2 core 6 sq.mm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

S & D of FRLSH pvc insulated 1.5 sqmm industrial grade copper conductor unsheathed flexible cable 1.1 KV confirming IS 964. Make- PHED Approved Make

Fitting fixing of above supplied street light fitting with suitable tie clam and MS plate for mounting on pole and connecting necessery wire including hiring charges of ladder and incidental charges.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry 1.1 KV Gr. 2 core 6 sq.mm XLPE Armored Al. Cable.

Finishing the end of the same by crimping method incl. supplying and fixing solderless socket (Dowels make) tapes, anticorrosive paste & jointing materials. 2 core 6 sqmm cable.

Earthing with 1 no. of G.I. earth spike (20 mm dia x 1.5 mtr. Long) driven into the ground upto 2 mtr. Drawing earth one with separate 6 SWG G.I. Wires providing 15 mm dia G.I. pipe protection from earth spike feeder box/ junction box/ poles and fixing to the same by suitable nuts & bolts all commette as per direction of EIC.

Supply, delivery and fitting fixing of Glow sign board as per following specification and direction of EIC. Erection of main structure of 5’-0” x 3’-6” x 6” (depth) with 40 mm x 40 mm x 5 mm thick MS angle and other section on necessary and inner support work by 40 mm x 40 mm x 5 mm thick MS angle dully welded with intermediated siftness structures having depth of 6” as per direction of EIC. The top and bottom including right, left and back sides of the structure shall be covered by 22 SWG G.I. sheet with brick piller required nos of MS bolt washer including 2 coat synthetic enamel paint & primer. Supply & fixing 2.5 mm thick super quality poly carbonate sheet with printing the size of sheet 5’-0” x3’-6”.The sheet on the back side with reserve cutting vinyle sticker with adhesive of the board and supply and fixing aluminium angle of with necessary screws, nuts, bolts etc. for rigidly fixed of the surrounding structure. Supply & fixking 4 nos. 20 watt LED tube light (Make-Approved make of PHED) fitting complete with all accessories on wooden batten structure with dully wire up ready for main operation of 230 volts. A.C. supply including inside wiring by 1.5 sq mm copper wire including porcelain connectors as required including transportation & shifting charges as per direction of EIC.

Supply, delivery at site and storage of safety equipments : 4.5 kg Co2 fire extinguisher-1no., fire bucket-2 nos. , rubber mat-1no., shock treatment chart-1no. and first aid box-1no. as per stisfaction of EIC

Add GST @ 18%

Add CESS @ 1%

COMBINE ENTERPRISES (BID ID -5604384)

RABINDRA NATH KHAN (BID ID -5604057)