Construction of Hostel for 100 Boys & 100 Girls in Collage Campus at Tilakwada, Dist. Narmada

Name of Work : Construction of Hostel for 100 Boys & 100 Girls in Collage Campus at Tilakwada, Dist.

BILL OF QUANTITIES

Item Description of Item (with brief specification and reference to book of

No. specifications) Quantity Unit Rate Amount

1 Excavation for foundation up to 1.50 MT depth including sorting out and stacking

of useful materials and disposing the excavated stuff up to 50 mt lead (A) Loose & 4205.00 Cu.M 125.86

2 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff 3263.00 Cu.M 139.54

upto 50 Meter lead. (A) Loose or soft soil

3 Filling available excavated Earth (Excluding Rock ) in trench plinth side of

foundation etc. in layer not excluding 20 cm in depth consolidation each 4596.00 Cu.M 137.47

deposited layer by ramming and watering etc. complete

4 Filling in foundation and plinth with murrum or selected soil in layers of 20cm.

thickness including watering, ramming and consolidating etc. complete. 3389.00 Cu.M 309.45

5 Providing and laying cement concrete 1:4:8 (1cement : 4 coarse sand : 8 B.T.

stone aggregates 40 mm. nominal size) and curing complete excluding cost of 560.00 Cu.M 2825.98

from work in :(a) Foundation and plinth

6 Providing and laying controlled cement concrete M150 for curing complete

including cost of formwork but excluding the cost of reinforcement for reinforced

concrete work in (A) Foundations, footings,Base of columns,Plinth Slab and Mass 719.00 Cu.M 3787.51

7 Providing and laying controlled cement concrete M250 for curing complete

including cost of formwork but excluding the cost of reinforcement for reinforced 1361.20 Cu.M 4460.16

concrete work in (A) Foundations, footings,Base of columns and Mass concrete.

8 Providing and laying controlled cement concrete M250 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Column Up to Plinth 108.00 Cu.M 7840.50

9 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars, posts and struts up to floor two 174.00 Cu.M 7795.82

level for Columns For All Floors.

10 Providing and laying controlled cement concrete M250 and curing complete

including the cost of form work but excluding the cost of reinforcement for 257.00 Cu.M 5869.81

reinforced concrete work For Plinth Beams

11 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 411.00 Cu.M 6191.88

reinforced concrete work in BEAMS For All Floor.

12 Providing and laying controlled cement concrete M200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 642.00 Cum 6489.14

reinforced concrete work for Slab All floors

13 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 122.00 Cu.M 7447.46

reinforced concrete work For Lintels & Sill Level in All Floors

14 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 42.00 Cu.M 6317.65

reinforced concrete work For Chajja in All Floors

15 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 60.00 Cum 8391.08

reinforced concrete work in STAIR CASES for All floor

16 Providing and laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding the cost of reinforcement for 60.00 Cum 8964.76

reinforced concrete work in Vertical Walls for All Floor

17 Providing TMT bar reinforcement of Fe-500D for R.C.C. work including bending

binding and placing in position complete for All Floor 373457.00 Kg. 78.46

18 Proving & Fixing Chicken mesh for joint between brick work & RCC work fixing

with nail & GI washer as per director in Charge

19 Brick Work using Common Burnt Clay Building Bricks having crushing strength

not less than 35 Kg/sm. in super structure Above plinth level up to floor two level

in cement mortar (1:6) ( 1 cement : 6 fine sand) (Conventional) For All Floors

20 Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse

sand ) in super structure above plinth up to floor two level Conventional Bricks 940.00 Sq.M 696.90

for All Floors.

21 Providing throating or plaster drip and moulding to R.C.C. chhajja by making 5mm

to 15 mm wide groove as per design etc. complete 320.00 Rmt 44.07

22 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and finished 6920.00 Sq.M 186.04

even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

23 Providing 10mm thick cement plaster (mala troweled finish) in single coat on

Celling,& Soffits of Stair, concrete wall for interior plastering finished even and 8120.00 Sq.M 187.86

smooth in (ii) cement mortar 1:3 (1 Cement : 3 Sand) For ALL Floors

24 20 mm thick Sand faced Gutka cement plaster with 1x1 cm grooves as suggested

by this office consisting of 12 mm thick backing coat of C.M. 1:3 ( 1 cement :

coarse sand ) and 8 mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse 2508.00 Sq.M 360.57

sand) for all heights as directed etc. complete.

25 Providing Water proofing Treatment on Sunk Slab including cement concrete

flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm

nominal size) laid in one layer and finished with a floating coat of neat cement 714.00 Sq.M 373.70

average 50mm thick to Prepare slope including water proofing chemical etc.

Complete for Sunk Slab All Floor.

26 Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. Length for

Sunk Slab or as directed by Engineer in Charge etc complete. 12.00 No 101.91

27 Applying two coats of Birla or Asian (or equivalent) acrylic lapy ( putty) & two

coats of primer of approved brand and manufacture on new wall surface to give

an even shade including thoroughly brushing the surface free from mortar 15371.00 Sq.M 40.59

dropping and other foreign matter and sand papered smooth.

28 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign 6920.00 Sq.M 84.82

matter and sand papered smooth.

29 Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on ceiling and soffits of slab surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign 8120.00 Sq.M 90.48

matter and sand papered smooth.

30 Wall painting two coats with weather proof acralic emulsion APEX type paint of

approved brand & manufacture and of required shade on exterior wall surface to

give an even shade over and including a primery coat with alkaly resistance 2870.00 Sq.M 122.14

primer of approved brand after throughly brushing surface to remove all dirt and

remains of loose powdered materials etc comp. for all height.

31 Providing and fixing 60 x 60 CM Machine cut, free edges, mirror polished Blue

Kotah stone slab flooring 25 mm thick laid on 20 mm thick cement mortar 1:6 (

cement:6 coarse sand) jointed with matching pigment & cement slurry including 2940.00 Sq.M 1189.78

rubbing and polishing finishing etc. complete.

32 Providing and fixing 60 x 60 CM Machine cut, free edges Blue Kotah stone slab

flooring 25 mm thick laid on 10 mm thick cement mortar 1:3 ( 1 cement:3 coarse

sand) for Skirting & Riser including jointed with matching pigment & cement 145.00 Sq.M 1205.60

slurry including rubbing and polishing finishing etc. complete.

33 Providing and laying Machine Cut free edges, Machine polished Granite Stone

slab 18 mm thick single peace For Stair,Steps,landing as per design incl. full

moulded round front edge and 1cm nosing and necessary groove on trade of

steps laid on 20 mm thick cement mortar 1:6 (1 -cement : 6 coarse sand )

jointed with grey cement slurry including rubbing,polishing & Finishing etc.

34 Providing and fixing machine cut, free edges, pre mirror polished Green marble

stone slab 18 mm thick (single piece not less than 150 cm ) for vertical

wall/Doors/Windows Sill,Jams for cladding as per design including full moulded

round inside edge and laid on 10 mm thick cement mortar 1:3 ( 1 cement: 3 584.00 Sq.M 1730.13

coarse sand) jointed with grey cement slurry including rubbing and polishing

finishing etc. complete.

35 Providing and fixing Machine cut Double polished kota stone in single piece (Max

150 cm long and width upto 45 cm with both side polished) for horizontal

Shelves including making grooves & Fixing the Same finished with flush pointing, 8.00 Sq.M 451.47

round open edge etc complete

36 Providing and fixing Machine cut & Polished kota stone in 7.5 CM width Strip

flooring for Ramp even grade over 20mm (Average) thick base of cement mortar

1:6 (1-cement : 6-coarse sand) laid over and jointed with grey cement slurry 52.00 Sq.M 1154.43

mixed with pigment to match the shade of slab including rubbing and polishing

etc. complete. (A) 25mm thick

37 Providing and laying coloured Anti skid ceramic tiles of the size 300 mm x

mm in skirting, risers of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in white cement 136.00 Sq.M 1017.30

etc. complete. Colour and Shade approved by Engineer-In-Charge

38 P & L Colour glazed vetrified tiles size 30 x 45 cm 6 mm thick in skirting risers of

steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and 480.00 Sq.M 1523.67

jointed with colour cement slurry

39 Providing and laying coloured matt Finished ceramic tiles of the size 600 mm x

600 mm in skirting, risers of steps and landing laid on a bed of 12 mm thick

cement mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in white 62.00 Sq.M 1017.30

cement etc. complete. Colour and Shade approved by Engineer-In-Charge

40 Providing and laying 30 x 60 cm white glazed tiles 6mm thick in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and 160.00 Sq.M 1017.48

jointed with white cement slurry

41 Providing and laying water proofing treatment with china mosaic tiles flooring

over avg 50 mm C.C. 1:2:4 bedding for maintaining slope for plain and curve

surface & 12 mm to 20 mm of broken piece not more than 2.5CM of ceramic /

glazed tiles ( one for more colour as directed ) to be laid over cement mortar

bedding of C M 1:3 (1 cement : 3 sand ) contain water proofing materials per bag

of cement useas specified by manufactured and slops to be tempered to bring

mortar up to surface with using white cement and colour pigment including

rounding of junctions and extending them up to 15 cm along the wall and curing

with bends any patens or design as per drawing and cleaning by using oxalic acid

42 Constructing Sandwich Platform of 18 mm thick Polished Black or selected

Granite at top and 25 mm thick Kota stone slab With 75CM height with necessary

Support using 20mm thick cement mortar 1:3 for sandwich and fitting at bottom

& edges with waterproof rigid adhesives including making necessary grooves in

walls with Vertical support of double Kota stone sandwich every 60 cm centre 40.00 Sq.M 3671.35

to centre including all labour material of approved quality including full

moulded round front edge fixed in wall for partition and jointed with grey

cement slurry including rubbing and polishing etc. complete

43 Providing and Fixing of 35 mm thick Single Shutter of Water proof, weather prrof,

acid, alkaly Resistant & Gel Coat finish FRP Flush Door, Designed with polyol foam 160.00 Sq.M 8585.00

core material & 1.5 mm thick skin as approved by the architect.

44 Providing and fixing Double Shuttered Door having Green marble Frame with all

Open Edges machine cut & Machine polished, Fixed by zinc coated Hinges with

double shutter of factory made & stamped IS 12823 Garde one, Type one 35 mm

thick. Solid core, Melamine Faced, Three Layred resin, Flushed door, Having 60.00 Sq.M 2311.89

Decorative Laminated on both sides & 12 mm thick T.W. Beading Fixed Around

the door from Novapan or Equivalent Company Holding Licence For Minimum

45 Providing and fixing Single Shuttred Door Having Green Marble Frame with all

open edges machine cut & machine polished fixed by zinc coated hinges with

Double shutter of factory made & stamped I.S. 12823 Garde one, type one

mm thick solid core melamine faced, Three layred Resin, Flushed Door, having 100.00 Sq.M 2755.28

Decorative Lamination on both sides & 12 mm thick Beading fixed around the

door, from Novapan or Equilvalent company holding Licence for minimum

46 Providing and fixing Three Track window (3 Shutter) having extruded aluminum

Colour anodized section frame main outer size 95mm x 24.10mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x

1.50mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm 180.00 Sq.M 1583.95

x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

47 Providing and fixing Two Track window (2 shutter) having extruded aluminum

Colour anodized section frame main outer size 95mm x 24.10mm x 1.17mm @

wt.of 0.738 Kg/mt , horizontal Two track member size 92mm x 31.75mm x

1.50mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm

@ Wt. 1.06 Kg/mt with sliding shutters of horizontal member size 40 mmx18mm 60.00 Sq.M 1838.20

x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x

mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

48 Providing and fixing standared extruded of alluminium section of size 65mm x

mm with colour anodized alluminium frame with 5 mm thick Ground glass 40.00 Sq.M 1961.42

louvers And Fixed Mosquito Net.

49 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304)

of required size like partition type in kitchen platform having drawer front side

and backside by using 19mm thick all proof plywood of ISI quality all side

laminated etc. as directed. The size of SS (IS 304) basket of size 4" to 18" for

tperforated, partition type as directed including necessary S.S. fittings, handles,

nobs, telescopic channels, etc. as directed

50 Providing and fixing 90 cm high Stainless Steel railing made from anticorrosive

304 grade S.S. pipe of 50 mm dia (16 gauge) as hand rail with S.S. 304 grade

baluster of 32 mm dia (16 gauge) as a vertical support fixed in RCC slab / steps of

stair at 1.2 Mt. c/c including three horizontal S.S. pipes of 16 mm dia (16 Gauge) 100.00 Rmt 2377.54

at equal distance fixed by 16 mm dia (16 Gauge) S.S. pipe with baluster including

accessories as per detailed drawing as directed etc. complete.

51 Providing and fixing 6 mm thick proflex multiwall polycarbonate roofing sheet of

approved make and shade, UV stabilised, having minimum light transmission as

per manufacturer specification, fixed over steel/ aluminium framework with self-

drilling Hilti screws complete with EPDM rubber washer, aluminium strip 50 ×

mm at joints, weatherproof silicone sealant at overlaps, including cutting to size,

drilling, edge finishing, sealing, scaffolding, labour, tools and tackles,

transportation and all incidental charges complete in all respects as directed by

the Engineer-in-Charge.

52 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of

required capacity each with all necessary fittings and connection etc. complete 40000.00 Liter 3.95

53 Providing, laying and jointing in true line and level 110 diameter U.P.V.C SWR

(Type B) Pipe conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110

mm diameter x 149 mm length x 145 mm height at every 2000 mm centre to

centre or shall be concealed in walls as directed including necessary fittings such

as bends, "Y" "T" shoes etc. including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

54 Providing, laying and jointing in true line and level U.P.V.C. SWR Type B Pipe

conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fitting conforming to IS 14735-1999 of approved make for drainage

system pipeline, pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using PVC Clamp of the size 160mm dia x 210 mm length x 960.00 Rmt 834.38

196 mm high at every 2000 mm centre to centre or shall be concealed in walls as

directed including necessary fittings such as bends, shoes, tees, etc. including

testing of pipes and joints and jointed with adhesive solvent cement including

cost of all materials (i) 160 mm dia

55 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary fittings etc. including 1760.00 Rmt 195.67

testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials.

56 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary fittings etc. including 600.00 Rmt. 148.12

testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials. 40mm dia

57 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH-

40) for cold water including fittings make equivalent as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary fittings etc. including 1440.00 Rmt. 91.84

testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials. 25mm dia

58 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR

13.5) Pipe having National Sanitation Foundation (NSF) seal for potable water of

following dia. Nominal bore tube fitting and clamps including making good the 1720.00 Rmt. 253.82

wall, ceiling, and floor, etc. complete 25 mm dia

59 Providing and fixing concealed centre point to wall ceiling & floor CPVC (SDR

13.5) Pipe having National Sanitation Foundation (NSF) seal for potable water of

following dia. Nominal bore tube fitting and clamps including making good the 200.00 Rmt. 170.36

wall, ceiling, and floor, etc. complete 15 mm dia

60 Providing and fixing Gun metal check or non-return full way wheel valve.(D)

61 Providing and fixing Gun metal check or non-return full way wheel valve.(E)

62 Providing and fixing Gun metal check or non-return full way wheel valve.(C)

63 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal

(ii) 50mm dia. 8.00 No 189.84

64 Providing and fixing wash down water closet (European W.C. Pan) with integral P

or S trap and PVC dual flush tank with complete fittings including cutting holes in

walls and making good the same connecting the flush bend with cistern and

closet etc. complete including plastic seat cover and including jointing trap with

Waste pipe overall size as per the selection of the Model by E.I.C. or as approved}

65 Providing & fixing of first quality (ii) Flat Back washbasin 550 mm x 400mm size.

(i) In white colour. including with approved sanitary grade material with C.P

waste coupling, waste pipe, 15mm dia Pillar & Stop Cock of approved brand with 30.00 No 2147.26

connection 15mm dia flexiable pvc pipe etc. complete

66 Providing, laying and filling 50mm thick expansion joint by hydro cell semi rigid

UV resistance with high performance laminated closed cell polyyhene foam joint 1111.00 Sq.Mt 1491.03

filler in sheet foam as directed etc.complete.

67 Providing and fixing screw down bib taps of following size.(B) Brass chromium

plated screws down Bib Tap. (i) 15mm dia. 314.00 No 186.83

68 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter

with jali of the following nominal diameter of self cleansing design with C.I scread

down or hinged grating including the cost of cutting and making good the walls. 100.00 No 600.23

69 Providing and fixing Jet spray to connect wall mount w.c with 1.5 mtr long plc.

heavy duty supply pipe with two side male female checknut etc. complete. 42.00 No 308.99

70 Providing and fixing S.W. Gully trap with C I grating brick masonry chamber and

water tight C I cover with frame of 300 x 300 mm size (inside) with standard 42.00 No 1246.92

weight (i)square mouth traps (C) 150 mm x 100 mm size P or R type

71 Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed

to wooden plugs with C.P. Brass screws, (B) 600mm x 20 mm size 36.00 No 616.42

72 Providing and fixing 600mm x 450mm Bevelled edge glass mirror of superior glass

mounted on 6mm the A.C. sheet or plywood sheet & fixed to wooden plugs with 30.00 No 859.41

C.P. brass screws and washers.

73 Providing and fixing in position PVC cowel went to pipes.(C) 160mm dia 30.00 No 75.75

74 Providing and fixing in position PVC cowel went to pipes.(B) 110mm dia. 30.00 No 50.50

75 Providing and fixing to wall, ceiling and floor 10.0 Kg f/cm2 working pressure

polyethylene pipes of the following outside dia. Low density, complete with

special flange compression type fittings wall clamps etc. including making good 1760.00 Rmt. 339.05

the wall, ceiling and floor. (G)110 mm

76 Constructing brick masonry chamber for under ground C.I. Inspection chamber

and bends with bricks having crushing strength not less than 35 Kg/cm2 in cm.

1:5 C.I. Cover with frame (light duty) 455 mm. X 610 mm. Internal dimensions,

Total weight of cover with frame to be not less than 38 Kgs. weight of cover

Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1 cement : 2 coarse 70.00 No 3660.76

sand : 4 graded stone aggregate 20 mm. size ) foundation concrete 1:5:10 inside

plaster 15 mm. thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls & abed concrete etc. complete.(ii) Inside dimensions,

500 mm. x 700 mm. and 450 mm. Deep for pipe line with one or two inlets.

77 Applying general insecticide pest control treatment to floors, cupboards etc.

including labour material etc. complete. Using Imidacloprid 30.5 SC As Per IS

part-III (0.075% Concentration by mass) is recommended 10.5 ml chemical dilute 2680.00 Sq.M 43.97

with 5 litters of water application 0.5 Litre chemical / Sq.M of surface is

recommended as per I.S

78 Providing and laying (Two level or slopes) and jointing with stiff mixture or

cement mortar in proportion 1:1, salt glazed stone ware pipes including testing of

pipes and joints etc. complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding 2400.00 Rmt 564.52

for stoneware pipes (166mm Ave. bed thickness) of following internal diameters

with necessary formwork and curing complete.(B) 150mm dia.

79 Providing and laying (Two level or slopes) and jointing with stiff mixture or

cement mortar in proportion 1:1, salt glazed stone ware pipes including testing of

pipes and joints etc. complete and Providing and laying Cement concrete 1:5:10

(1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding 800.00 Rmt 352.74

for stoneware pipes (166mm Ave. bed thickness) of following internal diameters

with necessary formwork and curing complete.(B) 110mm dia.

80 Providing and laying (to level or slope) and jointing reinforced concrete not

pressure pipes IS class NP 2 of the following internal diameter with collars and 3400.00 Rmt 678.03

nut ends prepared for collar joints including testing of joints complete 300 mm dia

81 Providing and fixing Safety Grills of required pattern for windows/door using

16mm x 16 mm square M.S. polished bars, Required at required spacing as per

design and hold fast with coach bolts including one coat of primer and two coats 5740.00 Kg. 116.91

of matt finished oil painting etc. complete.

82 Providing plinth protection to building including excavation in ordinary soil and

laying cement concrete 1:4:8 using stone aggregates of 40mm nominal size in

foundation layer 0.10 mt. thick below pre-cast Rubber Dye inter locking concrete

block 60mm thick with grade of concrete M200 pneumatic compressed by

mechanically pressed and as per approved design including 75mm Sand layer

for levelling and filling the joint with sand in proper line and level etc. complete, 520.00 Sq.M 1313.00

Including Providing and fixing pre-cast concrete kerb stone of grey cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade concrete

as per approved design and including excavation for fixing in proper line and

level, filling the joint with C:M 1:3 (1cement:3fine sand) etc. complete.

83 Providing and fixing in position 300 mm high, 150 mm wide English/Gujarati

letters made from 1.0 mm thick stainless steel sheet as directed by Engineer-in- 400.00 No 707.00

charge with all necessary tools & plants etc. complete.

84 Providing and fixing in position 150 mm high, English/ Gujarati letters made from

1.0 mm thick stainless steel sheet as directed by Engineer-in-charge with all 400.00 No 404.00

necessary tools & plants etc. complete.

85 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactibe Warning Tiles

(Attention Tilesi .e. Tactile Warning Surface |Indicator (TWSI)}) of Johnsan Endura

Tac Button Yellow Plus or equvglent make in flooring laid on 20 mm thick cement

mortar 1:6 (1 cement : 6 coarse sand) on new surface and jointod with cement

slurry including finished with flush pointing & cleaning the surface for all loors as

per detailed dravwing ctc. complete as directed by Architect or Engincer in

charge.Thse tiles shall be Anti Skid, Chemical Resistant, Fade Proof, Frost - lleat &

Weather Proof, High Flexural Strength, Highly Durable, Stain Resistance . All

Tactile Warning Tiles meet the specific size and dimension standards as required

86 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block

60mm thick with grade of concrete M300 pnumatic compressed / vibrated

mechanically and as per approved design Confirming to IS 15658 : 2006 including 5985.00 Sqmt. 705.95

35 mm Sand layer for levelling and filling the joint with sand in proper line and

level as per guidlines of IRC : SP 63-2018 etc. Complete.

87 Fix lovers as shown in Elevation, 114 mm wide GI sheet having thickness of

mm & weight not less than 490 GM/meter, Roll formed to create 84 mm wide

louvers snap fixed on special shaped GI channel, fix Louvers & channels shall be 100.00 Sqmt. 1696.80

finished with powder coating of 55 micron.

88 Providing and fixing bird protection jali (bird mesh) made of approved quality GI

wire mesh / Stainless Steel wire mesh / UV-stabilized HDPE netting of required

mesh size (20 mm to 40 mm or as directed), fixed to windows, ventilators, ducts, 40.00 Sqmt. 555.50

balconies, shafts, parapets and other openings to prevent entry of birds

89 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(G)160 mm

90 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with

excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including

brick masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick

cement plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m 40.00 Nos. 7087.17

with CRS steel and 0.60mx0.45m cast iron manhole cover with frame weight not

less than 35 kg as per directed by Engineer-in-charge

91 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m &

excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete of

0.15m thick including brick work in c.m 1:6 for 23cm thick wall including 15mm

thick cement plaster inside & outside with cement slurry & 10cm thick RCC 1:2:4 10.00 Nos. 14799.53

top cover with frame of minimum weight of 35 kg & filling filter material kapchi in

layers (25-40mm & 10-20mm) & BT metal 40mm & sand as per directed by

Engineer-in-charge.

92 Providing Recharging pit of size 2.0m Dia.& 2.0m depth of water logging with

excavation filling the pit with gravel & sand in layers including making 300mm dia

bore depth of 4.5mt & above concrete with kapchi in layers (25-40mm & 10- 4.00 Nos. 9456.63

20mm) & BT metal 40mm & filling brick as directed by Engineer-in-charge.

93 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff 21.00 Cum 691.11

upto 50 Meter lead (E) Hard Rock

94 Brick work using common burnt clay building bricks having crushing strength not

less than 35 Kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- 176.00 Cum 4279.98

Cement : 6 -fine sand) (B) Conventional.

95 Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4- 10.00 No 2932.93

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx

610mm and 450mm deep for single pipe line.

96 Constructing brick masonry chamber for underground C.I. Inspection chamber

and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm

x 850 mm and 450mm deep for pipe lines with three or more inlets.

97 Providing and laying (two level or slopes) and jointing with stiff mixture of

Cement Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes 150mm

laying lime concrete 1:2:4 (1-Lime putty :2-Fine samd : 4-Graded brick aggregates 800.00 Rmt 803.14

40mm nominal size) bedding for stoneware pipes of following internal diameters

with necessary formwork and curing complete.

98 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff 52.00 Cum 153.21

upto 50 Meter lead.(A) Loose or soft soil

99 Providing and laying controlled cement concrete M-200 and curing etc. complete

including the cost of form work and excluding the cost of reinforcement etc. 49.00 Cmt 8846.59

complete in RCC wall up to floor two level for Below plinth

100 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1

including neat cement finishing watering etc. Complete 78.00 Rmt 24.28

101 Providing 20 mm thick double coat mala cement plaster on interior brick /

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm 803.00 Sqm 361.30

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete. For Ground floor

102 Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo

on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with 308.00 Sqm 1070.50

white cement slurry (upto 10 ton)

103 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not

less than 35Kg. 3.00 Nos. 958.17

104 Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having [H]For 15 H.P,3 phase

open well horizontal mono block pump set suitable for 1600 LPM to 1025 LPM @ 4.00 Nos 48888.04

33 to 42 MTR head suitable for 65/80 mm dia delivery pipe Cat-II

105 Providing 10 mm. Thick Mala cement plaster in single coat for plastering on

ceiling and soffits of stairs and finished even and smooth in : (I) Cement mortar

1:4 (1 cement : 4 sand) including Mala troveled finish etc. complete comp.For 168.00 Sqmt 161.60

106 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm thick

flooring over 20 mm (average)thick base of cement mortar 1:6 (1-cement 6-

coarse sand) or L.M 1:1.5 (1 Lime putty : 1.5 coarse sand laid over and jointed 102.00 Sqmt 1019.39

with grey cement slurry mixed with pigment to match the shade of slab including

rubbing and polishing etc.complete

107 Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and Washable of required shade on wall surfaces to give an even

shade, over and including a priming coat with distemper primer of approved

brand and manufacture after thoroughly brushing the surface free from mortar 337.00 Sqmt 77.30

dropping and other foreign matter and also including preparing the surface even

and sand papered smooth.

108 Distempeing (Two coats) with oil bound distemper of approved brand and

manufacture and Washable of required shade on Celling and sloping roof to give

an even shade, over and including a priming coat with distemper primer of

approved brand and manufacture after thoroughly brushing the surface free from 159.00 Sqmt 85.85

mortar dropping and other foreign matter and also including preparing the

surface even and sand papered smooth.

109 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S

laths inter-locked together through heir entire length and jointed together at the

ends by end locks mounted on specially designed pipe shaft with bracket

plates,guide channels and arrangement for inside and outside locking with push- 18.00 Sqmt 3784.54

pull operation including the cost of hood cover and sprig etc.complete(A)

Shutters having width Above 3.5M

110 Providing and fixing window having extruded aluminum Colour anodized section

frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @

wt.of 0.738 Kg/mt) horizontal two track member size size 92mm x 31.75mm x

1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt), vertical member of size

size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt.

Kg/mt)with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm 8.00 Sqmt 2362.39

(of Jindal Section no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x

18mm x 1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section

@ Wt. 0.457 Kg/mt) with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for W2&W3

111 Drilling of 200 / 215 mm dia. bore well in over burden rocky or loose collapsible /

boulder strata & lowering of 175 / 200 mm dia. UPVC / PVC / ERW casing pipe

above 12 meters and up to 40 meters depth by DTH rig etc.complete

112 Supplying slotted PVC pipes of approved quality at site of work confirming to IS.

113 Supplying PVC plain pipes of approved quality at site of work confirming to IS.

114 Providing and jointing flat flexible coppered calble PVC insulated enamelled

aproved make three core 2.50mm. 210.00 Rmt. 117.16

115 Supplying submersible pump set suitable for bore of 150 mm dia or more having

3 phase motor capacity not less than 10 HP with [A] 10 stage 575 to 480 LPM

discharge at 60 to 70 mtr head for 65 mm dia delivery pipe Supplying and

erecting push button operated fully automatic Star-Delta starter with 3 Nos.of

32A. rating contactors and. 1 No. of directly operated thermal overload relay

having 20-32A range in sheet steel enclosure for 3 phase 415V. 50 c/s. A.C.

motors up to 35 H.P. (A)P.W.Blockwith necessary connection complete erected

onas directed. Cat-II

116 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium grade) of

the 50mm nominal bore, tube, fittings and clamps include. Making good the wall 225.00 Rmt 513.08

ceiling and floor.(F) 50mm dia.

117 Providing and fixing to concealed wall ceiling and floor galvanized mild floor

tubes (medium grade) of the 50mm nominal bore, tube, fittings and clamps 150.00 Rmt 608.35

incldg. Making good the wall ceiling and floor (F) 40mm dia..

118 Providing and fixing to concealed wall ceiling and floor galvanized mild floor

tubes (medium grade) of the 25mm nominal bore, tube, fittings and clamps 105.00 Rmt 401.95

incldg. Making good the wall ceiling and floor.(C) 25mm dia.

119 Earthwork in cutting including preparing the slope and camber andstacking or

utilising the cutting stuff in bank as directed upto 200 Meters from the end of

cutting with all lead and lift.(i) Hard murrum.+ Add extra over item 9 for 297.00 Cum 450.77

conveying and utilising the stuff in bank from end of cutting with all required lead

and lift.(C) Above 400 Meters upto 500 Meters

120 Box cutting the road surface to proper slope and camber for making a base for

road work including removing the excavated stuff with desposing on the road 985.00 Cum 112.02

side slope as directed up to 50 mt. Lead

121 BT Metal 25 to 40 MM & Aggregate 13.2 and down chips & SD including

conveyence + Spreading the stone aggregate for rolling and W.B.M. including

filling the interstices to required camber and gradient (excluding spreading of 296.00 Cum 1153.62

Blindage)(iii) 25mm to 50mm size crushed stone

122 Providing and laying foundation cement concrete 1:3:6 ( 1 cement :3 coarse sand

: 6 aggregate 20mm nominal size ) graded concrete and curing complete 197.00 Cum 3925.48

123 Providing and and laying controlled cement concrete M250 and curing etc. comp.

including the cost of form work and reinforcement for R.C.C. work for internal 394.00 Cum 4185.96

124 Compaction and finishing of cement concrete road by tremix process, providing

extra labour charge for tremix ( Vaccum dewatering service ) process on cement

concrete road surface by using vaccum dewatering pump floater surface vibrator

including making groove 5mm width and filling with polyvynile polymer and

rough finish to surface as per instruction including leveling etc. complete.

125 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with

collars for culverts including setting and joining the pipes in C.M. 1:2 watering

and laying (To level of slops of I.S. 458 / 1971 Class NP3 casted by vertically 150.00 Rmt 1095.18

vibrated technology of following internal diameter. (i) 300 mm dia.

126 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete

block 30cm length,30cm height and 15cm thick of M200 grade concret as per

approved design and including excavation for fixing in proper line and level,filling 787.00 Rmt 413.84

the joint with C:M 1:3 (1cement:3fine sand) etc complete.

127 Clearing and grubbing road land including uprooting rank vegetation grass

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees

cut earlier and disposal of unserviceable materials (C) By mechanical means in 1.00 Ha 28455.09

area of light jungle

128 Earthwork in cuting in all sorts of soil and soft murrum including conveying and

spreading the stuff, embankment as and where directed within 200meters from 300.00 Cmt 137.33

the end of the cutting with all required lead and lift.

129 Providing and casting in situ ordinary cement concrete M- 150 for coping, over

riding returns including formwork curing and finishing complete. 3.00 Cmt. 3705.34

130 Providing & fixing M.S. grills of required pattern in gaps of openings including

frame work etc. with one coat of red lead paint & two coats of oil paint etc. 700.00 Kg 112.95

131 Providing and fixing concertina coil fencing with punched tape concertina coil

mm dia 10 mt openable length having 50 no rounds per 6 mt length, upto 3mt

height of wall with existing angle iron (50mm x50mm x5mm )requird shaped As

per Directed Engeenier in charge. placed 2.4mt or 3.00mt apart and with

horizontal R.B.T. reinforced barbed wire(3 mm) , stud tied with G.I. staples and 100.00 Rmt 342.39

G.I. clips to retain horizontal, including necessary bolts or G.I.barbed wire tied to

angle iron, all complete as per direction of Engineer-in-charge, with reinforced

barbed tape (R.B.T.)/Spring core (2.5 mm thick) and weight 43.478 gm/meter at

compound wall for ESR M4/ intakewell.

132 Constructing cattle trap made from ISMC 100 border and G.I. Pipe 50mm dia

HEAVY DUTY at 12 cm spacing by welding and necessary support of I.S.M.B. 100 x

75 x 6 section fixing in prepard chamber as per drawing by necessary 12.00 Sqmt 4920.72

arrangement etc. Comp.

133 Plantation of trees in soil including digging 45 x 45 x 45cm size pits, preparing soil,

providing and mixing organic fertiliser, watering, planting and filling the pits as 300.00 No. 35.35

per direction including etc. comlete

134 Providing tree plants having minimum 1.00 mt height and healthy growth various

kinds as like Peltoform, Gulmahor, kananj, Amla, Raintree, Saptaparni, Cherry

Cryjeliya, Borsalli, Kadam, Buch, Champo, Asopalav and as suggested etc. 300.00 No. 25.25

complete. & Maintinence of 3 month After Providing Tree Plant.

135 Providing and fixing TREE GUARD 2.00 mt. long & of 600mm dia. square mesh of

2” x 2” and M.S. Flat of 25mm x 5 mm vertical support and three rings of 20 x

mm flat, fixing on site in CC 1:4:8 and including oil painting two coats with red 300.00 No. 939.30

lead priming coat.

136 Providing and fixing H.D.P.E. water tank with necessary G.I. fitting over flow pipe,

boll valve, clamp, nipple etc. including placing on 90 raised platform as directed. 15000.00 Ltr. 4.66

137 Providing and erecting open well type horizontal monoblock pumpset with C.I.

body having following specification (I) 1 H.P. single phase open well motor

pumpset suitable for 145 lit/min (ii) Suitable for 32 dia. delivery pipe with control 1.00 No. 8080.00

panel & 10 mtr long 3 x 1.5mm 2 submersible flat copper cable. (Cat-II type)

138 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 2.00 No. 1565.50

requirement. (a) Screen filter 7000 Ltr per day

139 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 2.00 No. 373.70

requirement. (b) Pressure Gauge 1" dia (0-7 Kg/Cm/2)

140 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 2.00 No. 2020.00

requirement. (c) By Pass assembly gun metal

141 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 2.00 No. 323.20

requirement. (d) 32 mm dia. Control Valve Gun metal

142 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and

requirement. (e) 16 mm lateral HDPE pipe 2.5 Kg including fitting and micro Tibe / 3500.00 No. 10.10

143 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 400.00 No. 2.12

requirement. (f) 1.2mm Micro tube

144 Providing and fixing Drip irrigation System of approved brand for plantation

including fixing with water supply line for plantation as per drawing and 400.00 No. 2.12

requirement. (g) Dripper 4 LPH / 8 LPH

145 Providing and laying in trenches 6.0 kgF/cm2 working pressure PVC pipes for

water supply line of the following outside dia. having white colour complete with 720.00 Rmt. 68.68

necessary fitting clamps etc. (B) 50 mm dia.

146 Providing and laying in trenches 6.0 kgF/cm2 working pressure PVC pipes for

water supply line of the following outside dia. having white colour complete with 430.00 Rmt. 44.44

necessary fitting clamps etc. (A) 32 mm dia.

147 Grassing with selection No. 1 doob grass including watering and maintenance of

the lawn for 30 days or more till the grass forms a thick lawn, free from weeds

and fit for mowing including supplying good earth, if needed (the grass and good 1000.00 Sqmt 90.90

earth shall be paid for separately).

148 Steelwork, welded in built up sections framed work including

cutting,hoisting,fixing in position and applying a priming coat of read lead

paint.(A) In beam and joists,channels, angles, tees,flats, with connecting plate or 105.00 Quntial 9108.48

angle cleat as in main and cross beam. Hip and jack rafters,purlins connected to

common raftes and the like.

149 Providing PPGL Sheets roofing fixed with galvanised iron J or L hooks,Bolt & nuts

8mm dia with bitumen and G.I. limpet washer filled with white lead complate 300.00 Sqmt 734.19

excluding the coat of purlinss,Rafters (1) 0.80 mm thick sheet.

150(a) Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following

type, erected on PVC / Metallic/ Wooden box, single mounting base frame 758.00 Pt. 582.77

covered with textured/ metallic /white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete. Cat-III

150(b) Point wiring for Light Point in Bath & W/C .Cat-III 8.00 Pt. 291.39

151 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up

to 10 mtr length, in below type of pipe erected with 6A Modular type switch and

hum free EME step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC / Metallic/ Wooden box, single

mounting base frame covered with textured/ metallic/ white front plate modules

erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Ca-III

152(a) Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected complete with Modular type switch &

pin Plug erected on PVC / Metallic/ Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with following 80.00 Pt. 612.06

type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Ca-III

152(b) [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db

board. (f) with medium class Rigid PVC pipe and accessories erected concealed in 22.00 Pt. 894.86

wall/ceiling complete Ca-III

153 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall 158.00 Pt. 309.06

/ ceiling with following type accessories. Ca-III

154 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires erected in below type of pipe with 6A Modular type

switches and following type of accessories erected on PVC / Metallic/ Wooden

box, single mounting base frame covered with textured / metallic/ white front 2.00 Pt. 725.18

plate modules erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed.(f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.

155(a) Providing following type of Modular Type Accessories mounted with PVC /

metallic/ Wooden box, single mounting base frame covered with textured /

metallic /white front plate , modules erected with necessary connections as per 2.00 Nos. 160.59

site situation directed by Engineer In charge(4) TV Co-axial Socket outlet .Cat-III

155(b) (8) Computer RJ-45 socket Ca-III 2.00 Nos. 160.59

155(c) (9) 16 Amp. SP one way switch.Cat-III 6.00 Nos. 180.79

155(d) (10) 6/16Amp. Universal socket Ca-III 8.00 Nos. 199.98

155(e) (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch.Cat-III 2.00 Nos. 410.06

156 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size

complete to be erected on/in wall or ceiling erected with necessary PVC fittings

& Junction boxes fixed with adhesive solution & Clamps with following dia of 710.00 Mtr. 33.33

pipes, in approved manner as directed.(b) 25 mm

157 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following size.

(a) with medium class Rigid PVC pipe and accessories(b) 2 wire 2.5 sq. mm

158(a) Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire 120.00 Mtr. 140.39

of green colour for earth continuity of following size (a) with medium class Rigid

PVC pipe and accessories (a) 2 wire 4 sq. mm

159(a) providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi

stranded, annealed copper conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required.(e) One wire 6.00 sq. mm

159(b) (h) One wire 25.00 sq. mm 32.00 Mtr. 295.93

160(a) Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade

ISI marked copper wires of following size to be erected as directed.(c) 1.00 630.00 Mtr. 28.28

Sq.mm 2 core round/ flat PVC sheathed

160(b) (e) 1.50 Sq.mm 3 core round PVC sheathed 298.00 Mtr. 58.58

160(c) (k) 4.00Sq.mm 4 core round PVC sheathed 40.00 Mtr. 221.19

161 Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE &

Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable 50.00 Mtr. 39.39

coverage overall sheathed with black PVC insulation.(b) RG-6

162 Supplying & erecting approved make LAN cable of following size in existing pipe

as per direction. [C] CAT - 6 40.00 Mtr. 47.47

163 Providing & erecting Switch board for Computer or electric apparatus consisting

of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections

as directed. 1 no. 6A/16A universal plug-switch combined. 3 nos. 6A Switch,

nos. 6A 5 pin Plug [B] For Modular Type Accessories Ca-III

164 Decorative call bell Ting-tong box type 250 volts complete erected 2.00 Nos. 71.71

165(a) Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.95, THD < 15%,CCT 3000 K

to 6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 % 26.00 Nos. 373.70

(fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Tube Light with

integral driver. (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Ca-III

165(b) (v) 36 Watts, Surge-2 KV, IP-20, conventional 4 feet Ca-III 560.00 Nos. 535.30

166 Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built, surge, protection,

Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf >= 130.00 Nos. 112.11

0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder. (ii)

167(a) Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with

diffuser and Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 45.00 Nos. 5080.30

lumens /watt . LED driver efficiency > 85 %. ( fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges of Wattage capacity of

LED fittings. The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and, Light

must have 440VAC line supply with over-voltage protection. (iii) 60 - 89 watts.Cat-

167(b) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. (vi) 160 - 199 watts. Ca-III 12.00 Nos. 8201.20

167(c) (vii) 200 - 250 watts.Cat-III 20.00 Nos. 9196.05

167(d) (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and

spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for

vertical mounting driver and accessories wired upto terminal block.IP 65 (b) 40 W 2.00 Nos. 4096.56

168 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. 18.00 Nos. 6790.23

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

169 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only.Cat III

170 Supplying & erecting approved make Four Pole 415V change over switch interior

for panel mounting with operating mechanism A.C.23 duty confirming to IS for 2.00 Nos. 12241.20

(D)200A .Cat-III

171(a) Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity, 5.00 Rn.Mtr 1961.42

erected with necessary bus bar supports /insulators, main cable socket to each

bar, erected in existing cubical panel with necessary connections. (A) Suitable for

100 Amp. Capacity

171(b) (B) Suitable for 200 Amp. capacity 2.00 Rn.Mtr 3202.71

172 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A system

and having breaking capacity 10 KA to be erected in existing box. confirming to IS 59.00 Nos. 297.95

8828/1996 with ISI Mark.Cat-III

173 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected 376.00 Nos. 123.22

in existing box. confirming to IS 8828/1996 with ISI Mark Ca-III

174 Providing & erecting 240 V MCB double pole switch for motor & inductive load

(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box 12.00 Nos. 362.59

having following capacity.(B) 40 Amp.Cat-III

175(a) Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve)

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 2.00 Nos. 306.03

following capacity.(A) 6 to 32 Amp.Ca-III

175(b) (B) 40 Amp. Ca-III 8.00 Nos. 325.22

176(a) Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having 20.00 Nos. 637.31

following capacity.(a) 6 to 32 Amp. Cat-III

176(b) (b) 40 Amp. Ca-III 32.00 Nos. 702.96

177 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having 6.00 Nos. 736.29

following capacity.(b)40 Amp.Cat-III

178 Plastic enclosure fitted with DIN rail suitable for incorporating Three /Four nos.

MCB 4.00 Nos. 108.07

179 Sheets steel powder coated enclosure suitable for incorporating One/Two nos.

180(a) Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used) 2.00 Nos. 1492.78

suitable for (A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way

180(b) (B) three phase incoming and single phase horizontal type outgoing Per phase

isolation type (PPI) (b) sheet steel double door (ii)6 way 20.00 Nos. 2913.85

181 Providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic component. 74.00 Nos. 2166.45

for following Max. rating erected as directed. (i) 25 Amps.DP.Cat-III

182 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 56.00 Kg 77.77

183 Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe

with coupling and buch buried in specially prepared earth pit complete with 39.00 Nos. 368.65

necessary 8 SWG earth wire.

184 For using salt and charcoal / coke as required for pipe type earthing. 39.00 Nos. 171.70

185 Supplying & erecting earth pit of minimum bore dia.150mm size approved make

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back filling compound of (B) 12.00 Nos. 4591.46

Inner chemical (CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Necessary test report must be submitted. (a) For Electrical

Installation up to 440V in normal soil Length of pipe - 1 Mtr Back filling compound

- 1 Nos Bag of 15 Kg.

186 Providing & erecting weather proof, dust & vermin proof, floor mounted front

operated indoor type cubical panel board necessary IP-42 and above protection

as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for

measuring instruments, earth bus & earth bolts, foundation flange - bolts-base 11.40 Sq mtr 10468.65

Plates, sufficient nos. of hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with epoxy

powder coating. (The rates excludes the cost of switchgears, bus bars, inter

connecting mains & Copper Aluminium strips, meters, Fuses etc. The dimension

shall be measured excluding base beams) The panel shall be supplied with

following approved manufacturers with following size. (A) locally fabricated panel

board. (i) with 350 mm depth

187(a) Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables.(C) 3 1/2 core 50 Sq. mm ( 25 480.00 Mtr. 341.38

Sq.1/2 mm core)

188(a) Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (b) 4 core 6 Sq. mm

189(a) Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in 32.00 Mtr. 184.83

existing trench / pipe of following size of cables.(A) 4 core 16 Sq. mm

190 Making trench in soft soil of suitable width of 90 cm deep for laying cable or

locating the fault all over the run and back filling the same and making the 1360.00 Mtr. 55.55

surface as normal ground.

191 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground

across the road crossing or on floor with necessary material in an approved 60.00 Mtr. 397.94

manner and making the ground as per original.(B) 400 mm dia

192(a) Providing & laying approved make Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II )with necessary connecting accessories of

same material at required depth in existing trench for laying of cable. below 989.00 Mtr. 62.62

ground / road surface for enclosing cable (A) 50 mm Outer dia

192(b) (C)90 mm outer dia 440.00 Mtr. 95.95

193(a) Providing and, fixing heavy duty flange type brass cable gland with rubber ring for

PVC insulated armoured cable complete with out going tails, insulating tape etc 98.00 Nos. 38.38

for following size of cables.(c) 2 to 4 core 6 Sq. mm

193(b) (C) 2 to 4 core 10 Sq. mm 4.00 Nos. 38.38

193(C) (D) 2 to 4 core 16 Sq. mm 8.00 Nos. 47.47

193(d) (E) 2 to 4 core 25 Sq. mm 10.00 Nos. 51.51

194(a) Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50 12.00 Nos. 75.75

195(a) Solder less crimping type Aluminium lugs conforming to IS suitable for cable of

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner.(A) 1.5/ 392.00 Nos. 6.06

196 Providing and fixing approved make Perforated C type cable tray. Made from

sheet steel. The cable tray should be single or double bended as per required and

as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI 80.00 Rmt. 622.16

hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge.(5)

X 50 X 2.0 mm Thick

197 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with , canopy & 30 cm. down 244.00 Nos. 1948.29

rod erected with earthing.(Make shall be approved by Engineer in charge))

198 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down

rod erected duly painted for fan complete with proper insulation without leakage 244.00 Mtr. 108.07

199 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in Ceiling with necessary 244.00 Nos. 108.07

200 Supplying & erecting approved make low noise decorative exhaust fan having

square frame ABS body with inbuilt lowers & square frame. 200mm with 1350 50.00 Nos. 1366.53

RPM Cat.II Ca-II

201 Providing recess in wall or window frame suitable for erection of Exhaust fan

complete with plastering and colour washing to match the colour of the wall or

window c0omplete with expanded metal in order to render the fitting in 50.00 Nos. 189.88

accessible and the room water-proof.

202 Supplying and erecting approved make Octagonal pole made from HR sheet steel.

The pole should be made as per IS. and shall be coated with hot dip galvanizing as

per IS 2629/2633/4759, suitable suspend local wind speed with integral Junction

box consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement

for cable termination to be erected With Suitable foundation (Included) as per

details given by manufacturer considering site requirement (D) 6 Mtr. Long

mm Top X 135 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts .Approx Pole

203 Supplying & erecting approved make SMC press moulded composite FRP. loop-

in, loop-out approx. 2mm thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged doors as per requirement

having locking arrangements with mounting clamp with nuts, bolts & washers 14.00 Nos. 476.72

suitable for erection on pole with cable clamps& earth bolt of following size of

box. (c)150mm x 125mm x 100mm [deep]

204(a) Supplying and erecting Street light pole bracket comprising main B Class GI pipe

of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing of

approx. 45cms.length and suitable for 76.5mm/80mm/require size of pole top

having nuts and bolts for fixing the brackets and having spread of 0.5 mtr. Length

with 110 deg.with vertical plane and suitable welded stiffener reducer and nipple 29.00 Nos. 491.87

with check nut complete painted with one coat.of Red oxide / PU base primer

and two coats of Aluminium / PU paint. paint with following nos of arms. [A]

Single Arm bracket 0.5 Mtr

204(b) [B] Double Arm Bracket 0.5 Mtr 8.00 Nos. 622.16

205 Supplying & erecting IP 55 grade following size section pillar fabricated from joint

less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable

clamps to be buried in ground to have appropriate erection to work uniform until

erected with cement concrete foundation and 45 cm high bricks work finishing

with plaster etc. hinged double door internally supported on both side, with

internal and outside looking arrangement with look and keys in duplicate 35 x

x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for 2.00 Nos. 3595.60

erecting Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (B) 75 X

X 45 cm section pillar fabricated from 16 Gauge MS Sheet with angle iron legs

cm long made from 35 X 35 X 5 mm thick MS angle.

206 Supplying and erecting HYLAM sheet on existing angle iron frame.for following

thickness.(D) 8mm 2.00 Sq. Mtr 1541.26

207 Supplying and erecting nuwood 12 mm thick on existing angle iron frame. 2.00 Sq. Mtr 291.89

208 Supplying & erecting approved make IP 55 grade Company fabricated Timer Panel

of following capacity for switch On-Off street lights on time scheduling basis

made from 16G CRCA sheet duly epoxy power painted inside and outside with

hinged doors and locking arrangement consisting of suitable size of 4 Pole MCB 2.00 Nos. 13350.18

and 4 pole contactor (cat-III)with analog time switch, auto manual switch of same

make and suitable input and output Bakelite terminals and with door earthing

approved by Engineer in charge.(B) 40 Amp

209 Supplying, erecting, testing, commissioning approved make M.S. Polygonal High

Mast Pole having following general Specification.

(a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep

galvanized minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with

ring and rubber lines for erection of luminaries of suitable site.

(b) Maximum telescopic section not more than four (c) Double drum gear pipe

motorized winch with 6mm dia S.S. Rod (For 16 mtr and above size)(d) Approved

make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with necessary

wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured. 2.00 Nos. 199052.82

(e) Bottom most section suitable for mounting reversible motor and switchgears

having door not more than 1400mm x 300mm with waterproof gasket & hinges &

locking arrangement.

(f) Pole structure comprises suitable size of reversible motor, cable and necessary

switchgears with control panel. (g) bottom section shall have suitable size of

thickness supports ribs foundation bolts nuts etc.(h) Item not comprises the cost

of lanterns.(i) Necessary Cement Concrete foundation as per IS including testing

& commissioning of the entire structure for following size of High Mast poles

[4] High Mast 16 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm, No. of Sec. No. -

2, Bottom Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate - dia.630 mm x

mm thick, Foundation Bolt Size M24 x 870 mm, Qty - 12 Nos., Suitable for

mounting Fitting of Light - 10 Nos.

210 Supplying & erecting Amplifier having following specification:

Power Output :250W (RMS) (300W Max.)

inputs : 6 Misc. & 2 Aux.

frequency Response :50-1500HZ I3db

Tone Controls :Cut & Boost type

LED Meter :5 LED Arrays 2.00 Nos. 13558.24

The amplifier suitable to operate 240V A.C.& 24volt D.C. (Battery) with automatic

changeover from AC to Battery operation, duly protected by wrong Battery

Polarity connections. [[Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

211 Supplying & erecting Booster Amplifier having power output of 25OW (RMS,),

suitable to obtain combined power output of two, with 6 mike inputs & suitable

to be used independently as a 250watt amplifier in combination with mike &

mixer. The booster Amplifier shall be without mike &Aux. input channels, The 2.00 Nos. 11606.92

system shall be suitable to operate on 24OV. A.C. & 24 Volts D.C. Battery.

[[Approved by Competent Authority i.e. not Below the rank of Executive Engineer

212 Supplying & erecting recess wall mounting speaker with 5W rated input power

3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia.

cone type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with

wall or ceiling of following size. [[Approved by Competent Authority i.e. not 42.00 Nos. 710.03

Below the rank of Executive Engineer ] (b)Square shaped 260 x 260mm size

213 Supplying microphones stands with sturdy mechanism, treble free movement &

positioning of microphones, free from rust with superior quality of chrome

plating with following size. [[Approved by Competent Authority i.e. not Below the 4.00 Nos. 445.41

rank of Executive Engineer ] (c)Fixed height 91 cms. & extendable up to 62 cms.

with round base of dia. 23 cms.

214 Supplying, installing and testing approved make microphone for All purpose, with

frequency response of 100 - 11000 Hz, having sensitivity 2.2mv / Pa & impedance

500 Ohms (LO- Z) supplied with quick detachable holder, 6 mtr twin core cable & 4.00 Nos. 1284.72

3 pin XLR connector. [[Approved by Competent Authority i.e. not Below the rank

of Executive Engineer ]

215 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚C within a hour, The water cooler should be comprising

of hermetically sealed compressor, fan motor, condensing unit, water tank 6.00 Nos. 61482.74

surrounded by evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made from Stainless

216 Supplying & erecting reverse osmosis (RO) water purification system with M.S.

powder coated pedestal frame, prefilter housing carbon filter suitable buster DC

pump, auto low & high pressure switches with following size of LPH capacity &

erected as directed.[D] 100 LPH with 1 phase / 3 phase Raw water pump of

500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter 10"x54" - (1 6.00 Nos. 77891.20

No), Micron cartridge filter 20" x 2.5" ( 1No), High pressure pump 500LPH @

10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane housing with RO

membrane of 40*40 - (1No), RO pressure tube 4" x 1E - ( 1No), 0 - 1200LPH

Rotameter -(2 Nos), with Recovery Rate 50%.

217 Supplying and erecting horizontal / vertical mounting type storage water heater

with copper container housed in M.S./S.S./ABS body insulated with glass

wool/puff complete with heating elements,adjustable thermostats 300C to 850C,

indicating lamp, safety valve, fusible plug, etc.complete erected with coach bolts, 12.00 Nos. 15195.45

nuts. washers & cementation (E)50 Ltr. with 2 KW. heating element.Premium

218 Supplying and erecting approved make panel mounting type Digital Voltmeter

having 3 digits LED display, 0 to 750 AC Volts range erected on existing panel

board with all connection, wiring etc .with manufacturers calibration certificate. 8.00 Nos. 1275.63

219 Supplying and erecting approved make panel mounting type Digital Ammeter

having 3 digits LED display, external CT operated, calibrated for 0 to 1000 Amps

suitable to operate on 500 Volt AC , erected on existing panel board with all 8.00 Nos. 1558.43

connection, wiring etc. with manufacturers calibration certificate.

220 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC

Supply 500 V on existing panel board with necessary connections. 16.00 Nos. 317.14

221 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5

ratio 15 VA burden erected in existing CRCA box duly secured with insulating 24.00 Nos. 274.72

materials connected to the meter.

222 Supplying and erecting approved make suitable panel indicator LED type lamp,

lens cover, complete erected with necessary connections. 24.00 Nos. 43.43

223 Providing & erecting open well horizontal mono block pump set with cast iron

body, complete for three phase submersible motor having.[D] For 5 HP 3 phase

open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @ 4.00 Nos. 20621.17

10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe.Cat.II

224 Supplying & erecting approved make motor control cubical panel [Star delta]

made from 16G CRCA sheet duly epoxy powder painted inside and outside with

hinged doors and locking with suitable size of ON - OFF isolator (AC 3 / 23 duty)

main fuses. Digital volt and current meter (in a single unit) with micro controller

based control unit and current sensing single phasing preventer electronic

overload protection, over voltage (Programmable) protection and under voltage

(Programmable) protection, prod less dry run protection programming facility for 4.00 Nos. 7250.79

setting of all parameter like overload current, high voltage limit, low voltage limit,

dry run limit with digital indication on seven segment LED display for any fault

like over load, high voltage, low voltage, dry running single crimped, electronic

star delta timer, feather touch start / stop push buttons to be erected on angle

iron frame. Grouted on wall the contactors will be of L& T, Siemens, BCH make

only)(A) DOL up to 5.0 H.P.

225 Lowering of submersible motor pump set at the depth of following ,complete

with required. Nos. and size of casing pipes erected by means of proper chain

pulley block & pipe wrenches after checking of threads of each pipe with coupling 4.00 Nos. 856.48

to take the load of the pump set and pipe assembly filled up with water (D)For

Open well Horizontal submersible pump set for sump well (i) 1 HP to 5 HP

226 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible

Submersible copper cable approved make of following Size.(B) 3 Core x 2.5 Sq. 60.00 Mtr. 104.03

227 Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -ISI marked

suitable for following size.(A) 50 mm dia. 4.00 Nos. 1020.10

228 Supplying of following size of HEAVY UPVC column pipe with coupler and wire

lock.[B] 50 mm dia 60.00 RMT 359.56

229 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long,

pump guard set, starter pipe Rubber ring for submersible pump & UPVC column

pipe as directed by Engineer - in - charge with necessary plumbing as desired.[D] 8.00 Per Set 1489.75

230 Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar

Power Plant with Solar Panels (ALMM approved): Frame Material : Anodized

Aluminum alloy Frame With Twin Wall Profile, Front Cover : High Transmission

Low-Iron Tempered Glass (AR Coated), High efficency and positive power

tolerance Pmax: 0/+5, Module Efficiency should be approx. 19.5%-22%, Normal PER

operating temperature 45'C, Junction Box with Waterproof IP67 & MC4 KW

Compatible and Enclosed with Bypass diodes, 100% Electroluminescence test to

ensure error free Modules, Thep. temp. co-efficient of the PV module shall equal

or better than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to

Unit Production:- More than 4.5 Unit /kw /day (Actual)(1Year Avg) With 10 year

Product warranty and 25 year Linear Power Warranty includes all mechanical and

electrical parameters of the Solar panel. Modules must be complied to the

DCR(Domestic content requirements). The Ration of AC to DC is 5:6 for the

Installation capacity which are given in AC KW.

Solar Inverter: MPPT Range: MPPT Range: 80-1000 V , Max efficiency: 97.5% -

98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor:

~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Integrated protection

of Inverter are Anti-islanding Protection, Input Reverse Polarity Protection,

Insulation Resistor Detection, Ground fault protection, Residual Current

Monitoring Unit, Output Over Current Protection, Output Short Circuit Protection,

Output Over Voltage Protection, PV array string fault Protection. Protection

Degree: IP65, User Interface LCD & APP, Datalogger & Communication: GPRS / Wi-

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor

Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over

Current Protection Integrated, Output Short Circuit Protection Integrated, Output

Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD

& APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure:

The mounting (Rectangular pipe / square pipe / circular pipe) with requisite cross

bars, nuts and bolts, etc. shall be Hot deep galvanized with minimum 80micron

coating. The Rectangular / square /circular hollow pipe section used for the

structure should have a minimum thickness of 2.0 mm. other than above, the

material thickness should be minimum 2.5 mm. A certificate of a structural

engineer certifying the strength and stability of the mounting structure to

withstand the weight and wind speed of 150 km/hour throughout the life span of

25 years of the system, shall be submitted by the vendors. Hot Dipped Galvanized

steel coils. suitable arrangement for base plate for foundation , solar panel

mounting, the structure should be suitable for carry the load of solar

panel,wiring, sprinkler system etc.

with necessary foundation work/wall mount, j bolt, anchor fastner etc. the nut

bolt used for installtion of stucture should be (SS 304) quality.The ground

clearance of the bottom most edge of solar panel shall not be less than 300 mm

to 1200 mm or as per site’s technical/feasibility requirement. a. Column –The

minimum section (thickness) should be 60MM*40MM

b. Rafter - The minimum section (thickness) should be 60MM*40MM

c. Purlin - The minimum section (thickness) should be 40MM * 40MM Balane of

System with necessary Swichgears (Suitabel size and protection of ACDB &

DCDB), inter connecting wiring, earthing system as per the CEIG drawing

approval, lightining arrester system as per the CEIG drawing approval, all

liasoning work with various gov. dipartment like state nodal agency,DISCOM &

CEIG is included in agency scope (Excluding All charges namely GEDA Application

fees, Solar connectivity Charges, Meter connectivity Charges, Meter testing

Charges and system stability/strenthning charges.)(E) Grid Tied Solar Power

System: 51 - 100 kW (3 - phase)

In Word : Eleven Crore Forty-Three Lakh Eighty-Eight Thousand One Hundred Eighty-Eight Rupees and Fifty-Eight Paise Only.

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the estimated rate

mentioned above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no

extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the

cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in all

5 The amount of dismentalled credit materials at Rs. 0 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and to be approved

From the Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Const. (R&B) Sub Division Rajpipla (R&B) Division

Rajpipla Rajpipla