Annual Plan-PATTANAKKAD GP - P - 80/24-25 ILLIKKAL ANGANWADI KURUPPUPARAMBU ROAD RETARRING ward-16

Amount

Apeendix -A Re -tarring of road

3.2:Preparation of Foundation for Embankment <br> Scarifying Existing Bituminous Surface to a Depth of 150 mm by Mechanical Means <br> Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4.

4.9:Wet Mix Macadam <br> Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406. <br> By Mechanical Means with 1 km lead

75.5.2.3pb:Tack Coat - With Packed Bitumen Rates <br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.

75.5.11.1.A.2pb:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 - Packed Bitumen Rates <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means <br> Type A <br> (II) Bitumen (S-65)

75.5.1.1pb:Prime Coat - Low porosity - With Packed Bitumen Rates <br> Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502

OD227012/2024-2025:Supply and fixing of advance direction/flag type direction/place identification/street name signboard having size 90x60 cm (area .54m2), made of retro reflective sheeting conforming to type XI standard of ASTM D 4956-09 & as per IRC 67 2012 SPECIFICATION fixed over 2mm thick aluminum sheet and back support frame of 40 x 40 x 6 mm supported on GI pipe 40 mm dia poles 2 M (one poles) fixed on the ground by means of properly designed foundation earth work excavation of 30cm x30 cm 60 cm, c c 1:2:4 0f 30cmx 30cm x60cm size including painting all non reflective faces with epoxy paint 2 coats over epoxy primer, writing lettering, figures ,arrows, complete as per design , 10 years pre- qualification warranty for type XI retro reflective sheeting from the sheeting manufacturer & certified.

75.8.1.1.A:Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

Sumod Kuriachan (BID ID -2046641)

Bidder Name

JOB.T.J

Sumod Kuriachan