S.R. to E-1 type Sujalam Flat at Shahibag, Ahmedabad. (Repairing, testing and annual maintenance of Fire Fighting system, Refilling of fire extinguisher and other misc. work for three year)

Name of Work : S.R. to E-1 type Sujalam Flat at Shahibag, Ahmedabad. (Repairing, testing and annual maintenance of Fire

Fighting system, Refilling of fire extinguisher & other misc. work for three year)

Item Quantities Item of work Estimated Rates Unit Total Amount

Item Quantities Item of work Estimated Rates Unit Total Amount

No. Estimeted In Figures In Words according to

but may be Estimated

more or less quantities

Rupees One Thousand Nine

1 3.00 Providing and fixing of dial type Pressure Guage having 100 1929.10 Hundred Twenty Nine And

mm dial & range of 0-15 Kg/cm2 with syphon and cock. Paise Ten Only Nos

Supply, installation, testing and commissioning 150 mm Rupees Seven Thousand Eight

2 3.00 diameter of C.I. Butterfly valve (IS:13095, PN 1.6) with integrally 7817.40 Hundred Seventeen And Paise

moulded linear of nitrile or EPDM. Stainless steel Disc & Steam Forty Only

Lever operated with ISI Marked as required. Nos.

Supply, installation, testing and commissioning 100 mm

Rupees Six Thousand One

3 3.00 diameter of C.I. Butterfly valve (IS:13095, PN 1.6) with integrally 6161.00

Hundred Sixty One Only

moulded linear of nitrile or EPDM. Stainless steel Disc & Steam

Lever operated with ISI Marked as required. Nos.

Supply, Installation, Testing and Commissioning of Cast iron

Rupees Twelve Thousand

NRV-Dual plate Check valve (PN 1.6) conforming to IS:5312

4 3.00 12221.00 Two Hundred Twenty One

complete with rubber gasket, GI bolts, nuts, washers etc. as

required. (A) 150 mm

Supply, Installation, Testing and Commissioning of Cast iron

Rupees Eight Thousand Six

NRV-Dual plate Check valve (PN 1.6) conforming to IS:5312

5 3.00 8635.50 Hundred Thirty Five And

complete with rubber gasket, GI bolts, nuts, washers etc. as

required. (A) 100 mm

Paise Fifty Only Nos.

Supply, Installation, Testing and Commissioning of Cast iron

Rupees Six Thousand Six

NRV-Dual plate Check valve (PN 1.6) conforming to IS:5312

6 1.00 6625.60 Hundred Twenty Five And

complete with rubber gasket, GI bolts, nuts, washers etc. as

required. (A) 80 mm

Paise Sixty Only Nos.

Rupees Nine Hundred

7 15.00 Providing, fixing, testing and comissioning of S.S Ball 919.10

Nineteen And Paise Ten Only

valve of sizes 25 mm dia. Nos.

Providing, fixing, testing and comissioning of Shutaff Rupees Eight Hundred Eight

Nozel of size 25mm. Only Nos.

Rupees Three Thousand Five

9 8.00 Providing and fixing 30 meter long length PVC nylon braided 3514.80 Hundred Fourteen And Paise

flexible pipe of 25mm dia. Eighty Only Nos.

Supply, Installation, Testing and Commissioning of the

following GI pipes , HEAVY CLASS, C- CLASS of

ISI standard as per IS: 1239 150 mm dia. and IS: 3589 upto

200 mm dia. and above. (with cutting, screwing, welding if Rupees Three Thousand Six

10 118.00 required) and providing all structural work fabricated 3666.30 Hundred Sixty Six And Paise

from standard sections, (GI rounds, angles, channels etc.), and Thirty Only

fittings like flanges, bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting holes and chases in

brick / RCC walls / slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. R.mt.

Supply, Installation, Testing and Commissioning of the

following GI pipes , HEAVY CLASS, C- CLASSof

ISI standard as per IS: 1239 100 mm dia. and IS: 3589 upto

200 mm dia. and above. (withcutting, screwing, welding if

Rupees Two Thousand Eight

11 35.00 required) and providing all structural work fabricated 2828.00

from standard sections, (GI rounds, angles, channels etc.), and

Hundred Twenty Eight Only

fittings like flanges, bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting holes and chases in

brick / RCC walls / slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. R.mt.

Supply, Installation, Testing and Commissioning of the

following GI pipes , HEAVY CLASS, C- CLASSof

ISI standard as per IS: 1239 80 mm dia. and IS: 3589 upto

200 mm dia. and above. (withcutting, screwing, welding if

Rupees Two Thousand One

12 23.00 required) and providing all structural work fabricated 2121.00

from standard sections, (GI rounds, angles, channels etc.), and

Hundred Twenty One Only

fittings like flanges, bends, tees, elbows, reducers, clamps,

hangers, fasteners etc. including cutting holes and chases in

brick / RCC walls / slabs complete with painting of one coat of

rich zinc primer and 2 or more coats of synthetic enamel paint of

approved make / shade complete as per specification. R.mt.

Providing, fixing, testing and commissioning of 63 mm

dia 15 m long RRL hose pipe with 63 mm dia. Male and female Rupees Five Thousand Five

SS couplings duly binded with GI wire, rivets etc. conforming to Hundred Fifty Five Only

IS 636 (type-A) as required. Nos.

Providing and fixing 63 mm dia gun metal /S.S branch pipe Rupees One Thousand Eight

14 8.00 of standard length with 20 mm hexagonal nozzle as per IS:903 1838.20 Hundred Thirty Eight And

with ISI marked as directed. Paise Twenty Only Nos.

Supply, installation, testing and commissioning of First

Rupees Eight Thousand Six

Aid Hose Reel equipment conforming to IS:884 comprising

15 7.00 8645.60 Hundred Forty Five And Paise

of hose reel drum, 30m, long 25mm (nominal internal) dia

water hose thermoplastic (textile rainforced) type-2 as per IS:

12585, Drum and brackets for fixing the equipments on wall. Nos.

Supply, installation, testing and commissioning of Fire

Rupees Three Thousand

16 7.00 Hose Box Cabinet having single door opening with M.S. 3030.00

Fabricated Stand, necessary locking arrangement by allan

key suitable for housing 1 nos. hose pipe, 1 no. Branch pipe Nos.

Supply, installation, testing and commissioning of Fire Rupees Five Thousand Six

17 7.00 Hydrant Valve standard ISI instanteneous type 63 mm dia 5610.55 Hundred Ten And Paise Fifty

coupling. Five Only Nos.

Providing, conducting, testing and demonstrating mock drill of

complete Fire Fighting System at site once in every six months,

Rupees Five Thousand Five

18 6.00 including functional testing and operation of fire alarm system, 5555.00

Hundred Fifty Five Only

fire hydrant system, fire pumps, sprinkler system, hose reel,

MCP, hooter/siren and other associated fire-fighting equipment,

including demonstration of emergency response procedure and

coordination with concerned personnel, complete as required. Job

Refilling of ABC Type Fire Extinguisher with required quantity of

ABC Dry Chemical Powder, including removal of old/used

extinguishing agent, cleaning and servicing of cylinder, checking

Rupees Six Hundred Thirty

of valve, pressure gauge, hose/nozzle and other accessories,

19 42.00 632.46 Two And Paise Forty Six

replacement of minor consumables wherever required,

pressurization with suitable propellant gas, leakage testing and

making the extinguisher ready for use, complete in all respects

as per applicable IS standards and instructions of Engineer-in-

Refilling of CO₂ Type Fire Extinguisher with required quantity of

CO₂ gas, including removal of residual/used gas, servicing and

Rupees Nine Hundred Sixty

20 42.00 cleaning of cylinder, checking of valve, horn/hose and other 969.10

Nine And Paise Ten Only

accessories, leakage testing and making the extinguisher ready

for use, complete in all respects as per applicable IS standards

and instructions of Engineer-in-Charge. Nos.

Supply, installation, testing and commissioning of Hooter Rupees One Thousand Ten

- sounder, abs Only Nos.

Rupees Five Hundred Five

22 5.00 Providing and fixing of Pump On / Off switch as per 505.00

requirement and specification consisting of following items Nos.

Supplying and fixing of 4-way fire brigade connection of cast iron

Rupees Seventeen Thousand

body with gun metal male instantaneous inlet couplings

23 1.00 17675.00 Six Hundred Seventy Five

complete with cap and chain as reqd. for suitable dia MS pipe

connection conforming to IS 904 as required

Rupees Forty Thousand Four

24 1.00 Supplying installation, Testing & Commissioning of control 40400.00

panel for all pump with Flanges nuts bolts gaskets etc. Nos

Rupees Three Hundred Three

Wrapping and coating of 150 mm / 100mm MS pipe Only Rmt

Supplying, fixing, testing & commissioning of double flanged

sluice valve of rating PN 1.6 with non rising spindle, bronze/gun Rupees Thirty Two Thousand

metal seat, ISI marked complete with nuts, bolts, washers, Three Hundred Twenty Only

gaskets and conforming to IS 780 of following sizes as required

Supplying, fixing, testing & commissioning of "Y" Type Flanged

Rupees Twenty One Thousand

27 2.00 Strainer With SS 410 Mesh of at Least 10 Times Pipe Area With 21715.00

Seven Hundred Fifteen Only

Flanged Inlet And Outlet Complete with Mating Flanges ,Nut,

Bolts And Gasket As per Specification 150mm dia Nos

Providing assistance for obtaining/renewal of Fire NOC from the

concerned Fire Authority, including preparation and submission

of necessary documents, coordination with Fire Rupees Fifteen Thousand One

Department/Authority, arranging site inspection, attending Hundred Fifty Only

observations/queries raised by the Fire Authority, and carrying

out necessary coordination for compliance of fire safety

requirements, complete as required. Job

Providing and fixing photoluminescent Fire Safety Signages of

approved design and size, indicating Fire Extinguisher, Fire Rupees Two Thousand Four

29 16.00 Alarm, Assembly Point, Directional Arrows and other required 2474.50 Hundred Seventy Four And

fire safety indications, made of durable suitable material with Paise Fifty Only

proper visibility, including all necessary fixing accessories,

complete as required. Sqm

Painting Two coats (excluding priming coat) on previously

Rupees One Hundred Five

30 125.00 painted steel and other metal surface with enamel paint, 105.80

And Paise Eighty Only

brushing to give an even shade including cleaning the surface of

all dirt, dust and other foreign matter. Sqm

Providing servicing, inspection, testing and repairing of electric

motor for fire-fighting pump, including dismantling and re- Rupees Nine Thousand One

31 3.00 assembly, checking of bearings, shaft, winding, insulation, 9140.50 Hundred Forty And Paise

terminal connections, alignment, lubrication and replacement of Fifty Only

minor consumable/spare parts as required, testing of motor

after repair and commissioning, complete as required. Nos

Hydrostatic Pressure Testing of ABC Type Fire Extinguisher

Cylinder, wherever due/required, including necessary

preparation, testing at prescribed pressure, inspection for Rupees Five Hundred Ninety

leakage/deformation, draining and drying of cylinder, and Six And Paise Ten Only

providing test certificate/marking after successful testing,

complete in all respects as per applicable IS standards and

instructions of Engineer-in-Charge. Nos

Hydrostatic Pressure Testing of CO₂ Type Fire Extinguisher

Cylinder, wherever due/required, including necessary

preparation, testing at prescribed pressure, inspection for Rupees Seven Hundred Fifty

leakage/deformation, draining and drying of cylinder, and Seven And Paise Fifty Only

providing test certificate/marking after successful testing,

complete in all respects as per applicable IS standards and

instructions of Engineer-in-Charge. Nos

Supply and installation of new ABC Type Fire Extinguisher of 6 kg

capacity, complete with suitable seamless steel cylinder, ABC dry

chemical powder, stored pressure arrangement with suitable

Rupees One Thousand Nine

propellant gas, valve assembly, safety device, pressure gauge,

34 3.00 1999.80 Hundred Ninety Nine And

discharge hose/nozzle, mounting bracket,

identification/operating instructions and all necessary

Paise Eighty Only

accessories, duly tested and certified as per applicable IS

standards, complete in all respects as per the specifications and

instructions of Engineer-in-Charge. Nos

Supply and installation of new CO₂ Type Fire Extinguisher of

kg capacity, complete with seamless steel cylinder, filled with

required quantity of CO₂ gas, suitable valve assembly, safety

Rupees Four Thousand Four

35 3.00 relief device, discharge horn, mounting bracket, 4444.00

Hundred Forty Four Only

identification/operating instructions and all necessary

accessories, duly tested and certified as per applicable IS

standards, complete in all respects as per the specifications and

instructions of Engineer-in-Charge. Nos

Rupees Fourteen Lakh(s) Sixty Two Thousand Six Hundred Eighty Three And Paise Thirty Seven Only

I / We am / are willing to carry out the work at _________________ % above / below percent (Should be written in figures and words) of the

estimated rates mentioned above. Amount of my/our tender works out as under:

*Estimated Amount *Estimated Amount

Put to Tender Rs.________ Put to Tender Rs.________

Deduct _____% below Rs. ________ Add _____% above Rs. ________

Net Rs.________ Net Rs.________

*(Please strike out whicever is not applicable)

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra

payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

5 Credit of Dismanteled Materials amount Rs. 46813.60 Deducted from 1st R.A. Bill

Deputy Executive Engineer Executive Engineer

Dated Signature of Shahibag (R & B) Sub Division Ahmedabad City (R & B) Division

the contractor Ahmedabad. Ahmedabad.