WBPHE/ EE/PMD/NIeT- 9 OF 2018-2019/sl1

Amount

Dismantling steel tubular pole embeded in CC foundation including excavation, filling of holes restoring surface, loading at site and delivering, unloading at sorting, stacking pro perly at any place as per direction of EIC.(For intake way lighting beside the entry gate).

Making the above steel tubular poles serviceable to a length of 11 mtrs. each by cutting welding out the damaged portion & inserting suitable good condition cutting etc. with supply 150 mm dia Heavy M.S. pipe(5mm thick) 2 mtr. Long as per direction of EIC.

Supply & fitting M.S. Base plate suitable for above poles by necessary welding as per direction of EIC.

Erection of above Steel tubular pole with Sole Plate & Cap etc. in C.C. foundation having 600X600X150 MM thick C.C.(4:2:1) base block below sole plate with hard Jhama metal including C.C(6:3:1) muffing of necessary dimension above & below GI including 3 MM thick neat cemented finish and providing G.I earth bolt after making drilled holes etc. on pole & carriage of pole from Store/stake yard Work site including filling up the excavated earth pit with Shifted Soil and ramming properly.

For providing CC (6:2:1) base block (around the pole) dimension 0.60X0.60X0.76 mts. above ground level, neatly cemented finish (3 MM thick) at the base of pole(in lieu of CC muffing) including S&F looping Cable box of proper dimension and made of MS/CI or equivalent consisting with 1 no. proclain base & kitkat at muffing including plaster & neat cement completed including providing drilled hole to pole suitable for alkathene/polythene pipe entry as directed for street light wiring.

Supply & delivery at site of 1.1 KV grade 10 sq.mm2 XLPE insulated 4 core aluminium armoured cable for Whole lighting arrangement. (Make: Havels/Gloster/Polycab) (IS-7098(P-1)-1977)(cable will be supplied as necessary.No extra cable will be received by department)

Laying of cable of 1.1KV grade 4 core 10 sq mm on wall/surface including S&F MS Saddles with earthing attachment in 10SWG GI (Hot Dip) Wire, making holes etc. as necessary mending good damages and painting.(for wall as necessary).

Laying of above Cable in under-ground trench 460 MM X 760 MM average depth with brick protection on the top of the Cable with 8 nos. bricks per meter or as required including filling the space between the brick and cable and also the trench with shifted Soil, levelling up and restoring Surface duly rammed.(for total lighting system as necessary)

Supplying and fixing looping cable box of Size (250 x 250 x 100mm) water profing arrangment and made of MS/GI consisting with 1 no. procelain base and kitkat(15A,230V) etc. and housing the same in pole muffing including addition and alteration to the existing CC muffing after dismantling the damaged looping cable box etc.by necessary clamps,nuts,bolts,washers etc.with necessary painting as per direction of EIC..(For pole in the pump house) as per PWD schedule & IE rule.

Supply and fitting fixing looping cable box of (200 x 150 x 100mm) water profing arrangment and made of GI and made of MS/GI or equivalent consisting with 1 no. porcalin base & kitkat (250V, 15A). by necessary clamps,nuts,bolts,washers etc.(for 6 nos pole lighting in intake) as per PWD schedule & IE rule.

Dismantling of non-functioning & damaged light then fittings below supplied luminaries on pole, pump house head and barge by arranging scaffold arrangement etc. for rectification, repairing For total scheme as per direction of EIC.(for all fitting in the WTP)

Supply of following electrical accessories, as per sample for proper illumination of the Yard area as per instruction of E.I.C (for S.V. light fittings) (For pole lighting in the pump house) :- a) SON-T Lamp 150 Watt. (Make: Philips/Havells)

b) Ballast for S.V.light 150 Watt. (Make: Philips/Havells)

c) Ignitor for 150 Watt S.V. Light(Make: Philips/Havells)

Supply of following electrical accessories, as per sample for proper illumination of the Barge Pathway as per instruction of E.I.C (For CDM-TT 150 Watt. Light fittings) (For 6nos. pole lighting of Intake) a) Ballast for CDMTT 150 Watt.

b) 150 Watt. Lamp CDM-TT

c) Ignitor

d) Holder (E27/E40 with accessories)

Supply of following electrical accessories, as per sample for post top decorative luminaire as per instruction of E.I.C-(For 2nos. Gate in pump house) a) Ballast 70 Watt.

b) Lamp 70 Watt.

c) Ignitor 70 Watt.

d) Holder 70 Watt. (E27/E40 with accessories)

Supply, fitting, fixing of pressure die cast aluminium floodlight luminaries for 1X400 Watt. SON-T with housing, ballast lamp and M.S. angle etc. as per direction of E.I.C. (Floodlight to the intake way). (Make: Philips, Model - SWF331)

Supply & drawing service line from cable box to fixture by supplying 1.1 KV grade ‘FR’ stranded 2X2.5 sq mm +1x1.5sqmm PVC Insulated copper unarmoured with necessary inter connection, all complete after dismantling of old line as per direction of E.I.C. (From cable box to Fixture for all pole lighting). (IS-7098(P-1)-1977)(Make: Finolex/Polycab/any approved make).(cable will be supplied as necessary.No extra cable will be received by department)

Painting the steel tubular poles upto 9 meters with single/double header assembly with a coat of red oxide primer and two coats paint(Best quality) after smoothening surface by sand papering etc. including using of approved putty etc. as per direction of E.I.C.

Wiring in 1.1KV grade single core standard FR PVC insulated and unsheathed copper wire (Brand approved by EIC) of following sizes in 25 mm PVC casing-capping(precision make) incl. necy. PVC clips, fittings etc. : i) 2X36/0.39(2.5 sqmm +1X22/0.3(1.5 sqmm) (For circuit of each room of total substation).

Distribution wiring in 1.1KV grade 2X22/0.3(1.5 sqmm) single core standed FR PVC insulated and unsheathed copper wire(Brand approved by EIC) in suitable size PVC casing capping(precision make) with 1X22/0.3(1.5 sqmm) single core standard "FR"PVC insulated and unsheathed copper wire for ECC incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch(Anchor) fixed on sheet steel fabricated switch board with perspex/ bakelite top cover on wall modular GI/PVC switch board with top cover on wall incl. necy. Connections and making earthing attachment and mending good damages to building work (PVC casing-capping and switch board both on surface. (Avg. run 8m).(all wiring in all substation rooms).

Repairing overhauling of the Exhaust Fan including winding coil including dismantling and re-fitting the same as per direction of EIC. ( one in panel room & one in transformer room.)

Supply and fixing single 20Watt. LED button light fitting complete at sub-station room with G.I. angular clamp on wall with all accessories. (Make: Philips,Havells) (For sub-station rooms).

Laying of cable of 3.5 core 95 sq mm in a under ground trench in single tier formation (Horizontal) the trench size 460 mm x 760 mm average depth with brick protection on the top of each cable 8 (eight) nos. brick per mtr. or as required including filling the space between the brick and cable and also the trench with shifted soil, leveling up and restoring surface duty rammed as per direction of EIC. (cable will be supplied by departmentally).(Which portion is above ground as naked condition).

Supplying and fixing compression type gland complete with gland, brass ring and rubber ring for dust and moisture proof entry of XLPE armoured cables as below . a) 3&1/2 core 95 mm2

b) 2 core 10 mm2

Finishing the end of following XLPE Ar.Al. cables by crimping method including S&F solderless socket(Dowels Make), tapes, anti-corrosive paste & jointing materials :- a) 3&1/2 core 95 mm2

b) 2 core 10 mm2

Straight through jointing of 3&1/2 core 95 mm2 Al.Ar. Cable by compound jointing kit including S&F ferrul, tapes and jointing materials.(For naked cable above the ground).

Earthing with 50 MM dia G.I. pipe 3.64 mmthick 3.04 Mtr. Long and 1X6 SWG G.I. wire(4 Mtrs long) 13 MM dia X 80 MM long G.I. Bolts, double nuts, double washers including supplying and fixing 15 MM dia G.I. pipe protection (1 Mtr. Long) to be filled with bitumen and salt partly under the ground level and partly above the ground level driven to an average depth of 3.65 Mtrs. Below the ground level and restoring the surface duly rammed. As per direction of E.I.C. Double earthing to be done for 11 Mtrs. Light pole and kiosk box. (2 nos.For 400W SON-T flood light to intake way and 2nos for kiosk box in Intake)).

Making 40 mm dia single arm assembly to 32 mm dia for fixing new LED light fittings with cutting, welding supplying 32 mm dia M.S pipe etc. complete.(For chemical house and guard room)

Supply & fixing LED having 72 Watt(Model BRP 410, Make:Philips) with supplying all jointing materials etc. as per direction of E.I.C. .(For chemical house and guard room)

Supply, fitting, fixing of following electrical accessories, as per sample for MHNTD 70 watt. Flood light fittings (For small Garden):- a) 70 watt. Ballast

b) 70 watt. Lamp

c) Ignitor 70 watt.

Supply & fixing 40 mm dia M.S. pipe1.5mtr, structure suitable for providing Yard light luminaries and to be fix on the top side of Building by necessary clamps, nuts, bolts, washers etc. with painting as per direction of E.I.C.(For guard room building where 1no light fitting with its total structure has broken)

Supply & fixing following sheet steel main switches on angle iron frame and painting :- a)415 V 32 Amp. TPN ( For controlling pole lighting into the pump house Premises for 2nos cable ).(Make :-ABB/Havell's/Siemens)

b) 240 V 32 Amp. SPN (for controlling internal light exhaust and others in sub-station) (Make: -Siemens/ABB/Havells)

Supply and fixing 240 V 32 Amp. D.P. MCB 10 KA ‘C’ characteristics and necessary connection (in River side kiosk for operating the lighting system) (Make: Havels/ABB/Siemens).

Supply and fixing 240 V 300 mm Exhaust fan (Heavy duty) with luver shatter after cutting hole on wall with mending good damages and complete connection as per direction of EIC. (Extra for 2nos Transformer room) (Make: CG/Havell's)

Supply & fixing 7 watt. LED lamp (Make: Philips) ( for extra in all room of Sub-Station)

Supply & fixing 15 watt. LED lamp(Philips), Pin type brass holder, 2 core 1.5 mm2 PVC insulated copper cable(2.5 mtrs.) through PVC conduit, porcelain connector with repairing High bay light housing, painting, connection complete as per direction of EIC. (For intake way)

Supply & fixing High bay/Bulk head light fitting complete with 15 watt. LED lamp (ENDURA PEARL Havells) 2 core 1.5 mm2 PVC insulated copper cable (2.5 mtrs.) through PVC conduit, porcelain connector, painting, connection complete as per direction of E.I.C. (2 nos lighting for intake in which all setup has damaged.)

Repairing the outdoor kiosk box with supply M.S. sheet, M.S. Flat, M.S. Angle, as necessary with cutting damage portion, welding, making gland plate, painting with supply & fixing Caution Board complete as per direction of E.I.C.(In intake side kiosk box)

Withdrawing & relaying dressing the existing Al. Ar. Cable on pathway/Barge site, including supply & fixing G.I. saddles with earthing attachment in 12 SWG G.I. (Hot Dip) wire making hole etc. as necessary mending good damages and painting.(intake way cable which are above ground)

Supply & fixing 415 V 4 Pole 160 Amp. 35KA M.C.C.B in existing DBS/encloser (Make: Schneider/Seimens/ABB/Havels) (for entry of 95 sq mm cable into the kiosk in riverside)

Supply and installation Glow signboard by maintaining following specification. Supply and erection of main structure of 4’-0” x 3’-6” x 6” (depth) with 40 mm x 40 mm x 5 mm thick MS angle and other section on necessary and inner support work by 40 mm x 40 mm x 5 mm thick MS angle dully welded with intermediated siftness structures having depth of 6” as per direction of EIC. The top and bottom including right, left and back sides of the structure shall be covered by 22 SWG G.I. sheet with brick piller required nos of MS bolt washer including 2 coat synthetic enamel paint & primer.

Supply & fixing 2.5 mm thick super quality poly carbonate sheet with printing the size of sheet 4’-0” x 3’-6”.The sheet on the back side with reserve cutting vinyle sticker with adhesive of the board and supply and fixing aluminium angle 1 1/2" x 1/2" of with necessary screws, nuts, bolts etc. for rigidly fixed of the surrounding structure.

Supply & fixking 4 nos. 20 watt LED tube light (Make-Philips) fitting complete with all accessories on wooden batten structure with dully wire up ready for main operation of 230 volts. A.C. supply including inside wiring by 1.5 sq mm copper wire including porcelain connectors as required including transportation & shifting charges as per direction of EIC.

Supply and laying 2 x 1.5 sq mm 1.1 KV grade single core stranded ‘FR’ PVC insulated & unsheathed copper wire with prelaid PVC casing caping including necessary PVC clips, fitings etc. including interconnection with Glow sign board as per direction of EIC.

Supply, delivery & storage at site chlorination system with all equipment, instrument & accessories as per specification as follows of approved make: IS-10553/4263 Wall mounted vacuum operated gas chlorinator, capacity 1 kg/hr. Details of items are Provided in SOQ of the Scheme

Supply, delivery at site of 16 sq.mm 1.1 KV grade, 4 core, XLPE insulated Al.Ar.cable for main MCC feeder to incomer panel. Make: Havell’s/Nicco/Gloster/Polycab. Details of items are Provided in SOQ of the Scheme

Dismantling of existing non functioning damaged chlorination system and Installation, commissioning of all new components as listed above in chlorination system including supply of all required materials as per technical specification, drawing of three phase, power line from power supply panel to booster pump with necessary earthing arrangement as per I.E rule upto the satisfaction of E.I.C. (with 1st filling of 4 nos @100Kg cylinder as per technical specification) (including trial run of the entire chlorination plant by engaging skilled technician for one month upto satisfaction of EIC.) Details of items are Provided in SOQ of the Scheme

NUPUR CHANDRA HALDER

TAPAN KUMAR DEY