PROVN OF 2X GATES AND ALLIED INFRA FOR OFFICERS MESS ATACHINATHANG,PROVN OF 1X WASHER MAN SHOP WITH ALLIED SUPERSTRUCTURE AT ACHINATHANG, PROVN OF WASHER MAN SHOP SIZE 15 X 15 FT,AT BIAMAH AND PROVN OF 1XTOILET SET NEAR OFFICE COMPLEX AT LAMAYURU

Amount

Excavation over areas in hard dense soil not excedding 1.5 m deep and getting out soil complete all as specified and directed by Eng-in-Charge

Excavation over areas in hard dense soil excedding 1.5 m and not exceeding 3 m deep and getting out soil complete all as specified and directed by Eng-in-Charge

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard dense soil complete all as specified and directed by Eng-in-Charge

Returning filling in, including spreading leveling, watering and well ramming in layers not exceeding 25cm in hard dense soil complete all as specified and directed.

Removal of excavated soil to a distance n. exc 50 and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified

M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified & directed

M&L for precast cement concrete block masonry with solid block exc 10 cms in width made with PCC 1:3:6 type C-1 (using 20 mm graded aggregate) and set in CM 1:6 complete all as specified and directed.

M&L 12 mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete all as specified and directed.

M&L 15 mm thick cement plaster in CM 1:4 on brick work or concrete surface other than fair face or brick work and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L stone walling of random rubble uncoursed well bounded bedded and solidly hearted built in CM 1:6 brought to course complete all as specified and directed.

All as above item but laid in dry completed all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices, pillasters etc, and applying two coats of oil emulsion distemper over and including one coat of chalk whiting preparatory to distempering complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including cornices, pillasters etc, and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L Hard core broken stone boulders of gauge not exceeding 63mm broken stone deposited spearding and levelled in layers not exceeding 15cm thick watered and well rammed to a ture surfaces complete all as specified and directed.

M&L for 75mm thick in PCC 1:3:6 type C-1 as in plinth protection surface finished even and smooth without using extra cement comlete all as specified and directed

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm aggregate) in floors complete all as specified and directed

M&L for 25mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm aggregate) under tile as subbase complete all as specified and directed

M&L Glazed ceramic white colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for white non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match the existing surface laid over 20mm thick avg screed bed in CM 1:6 complete all as specified and directed.

M&L reinforced cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate ) as in slab supported on walls beams and colums in floors, roofs, landing balconies, baffle wall etc complete all as specified and directed.

M & L form work to sides and soffits of suspended slabs such as roof slabs , landings and similar work not exc 200 mm thick (horizontal or sloopping) for flat fair finished surfaces complete all as specified and directed.

M & L form work to edges of concrete flats, RCC/PCC bands floors roofs and similar works exc 10 cm and not exc 20 cm wide surface finished rough to receive plaster complete all as specified and directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

S&F grating round 100mm size of PTMT complete all as specified and directed

S & F rotational moulded polythene, two layers, water storage tank 1000 Ltrs capacity, closed top, cylindrical, hoisted and fixed in position including minor repairing , for iron pipe including dismantling of old tank complete all as specified and directed .

S&F Second class softwood plain , solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue pinned at joints supplied and fixed complete all as specified and directed.

S&F second class soft wood 35 mm thick plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers,supplied and fitted to chowkats complete all as specified and directed.

S/F 30 mm thick second class soft wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

M&L for two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wooden surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed.

S&F 75 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed.

S&F 250 mm long aluminium alloy, anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed complete all as specified and directed.

S&F 100 mm aluminium anodised barrel tower bolt of extruded section and fixed.

S&F for 150mm size Aluminium handles, cast type, anodised

S&F 100 mm extruded aluminium alloy handles, fabricated type , anodised complete all as specified and directed.

S&F 150 mm aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.

S&F 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L and J type or cranked hook bolt as in roofs, walls etc with grade of zinc coating 275, complete all as specified and directed.

M&L for preparation of newly or previously untreated surfaces of steel or iron work over 10 cms width or girth and applying two coats of synthetic enamal paint over a coat of red oxide Zink chrome primer complete all as spd and as directed.

S&F 25mm outer dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc

S&F 15mm bore Bib Tap Chromium plated fancy type complete all as specified and directed.

S&F Steel work in tubular trusses, purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 painted with one shop coat of zinc chromate primer paint complete all as specified and directed.

S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc.

S&F plates (plain or chequered) square cut or notched forming holes, without any attachment complete all as spd and as directed by Engnr-in-charge.

S&F PVC (SWR) pipes single socketed in in any length with rubber ting joints, laid in trencehs or in floors 110 mm dia

S&F PVC (SWR) pipes single socketed in in any length with rubber ting joints, laid in trencehs or in floors 75mm dia vertically as vent pipe

M&L prelaminated particle board 9 mm thick interior grade, prelaminated one side with decorative lamination & other side balancing white lamination fixed with nails to timber frame work as in wall/ceilings, complete all as specified and directed.

M&L for second class soft wood (Kail) plain fillets, rectanglar or triangular in section clean sawn secured with nails exceeding 13 Sq cm and not exceeding 25 Sq cm complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia

M&L for I class softwood moulding as in cornices, rails etc Sectional area not exc 6 sqcm

S&F HDPE water storage tank of capacity 1000 Ltr, cylinderical vertical type, 3 layer, insulated with 75 mm thick PUF insulation of density 48 Kg/Cum covered with Lid having locking arangement including float valve high pressure PTMT with epoxy coated aluminium rod & high density plastic ball secured for iron pipe and fixed of 15 mm bore complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in strirrups, spaces and binder and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L reinforced precast cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate ) as in cover slabs manhole etc and set in cement mortor 1:4 complete all as specified and directed.

M &L PCC type B-0 1:2:4 (12.5 MM graded aggregate) as in floor drain haunching, bending, coping and etc similar works complete all as specified and directed.

M&L for RCC M-30 Design mix (using 20mm graded crushed stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete

M&L for RCC M-30 Design mix (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts

M&L form work to sides of concrete with fair finishes, foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter.

M&L form work to side of Pillars, posts, struts,piers,columns & stanchions.

M&L for rendering 5 mm thickrendering on RCC/concrete surfaces in CM 1:4 and making the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surface and applying two coats of cement paint over a coat of primer on walls all as specified and as directed.

M&L for Plain Cement Concrete Type B-1 1:2:4 (using 20 mm graded stone aggregate) as in coping/moulding etc as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410-W (Gde E-250) quality -A complete all as specified and directed.

S&F vitreous China Squatting pan 'Orrisa' pattern size 580x440mm white with integral foot rest, and jointing to PVC/CI bend and flush pipe complete including making good to floor complete all as specified & directed.

S&F PVC flushing cistern dual type 10 Litres capacity incl all accessosaries complete all as specified and directed.

S&F 15mm bore size pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed.

S&F 15mm bore Stop Valve (Angle Valve) chromium plated fancy type complete all as specified and directed.

S&F vitereous china wash hand basin, white, flat back of size 550 x 400 mm including brackets, cutting for pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L for preparing new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Material & Labour for point wiring with 1.5 sq mm (Nominal area) FRLS, PVC insulated, 1100 volt grade, multistranded copper conductor cable un-sheathed in & including U/G Conduit consiled with fittings/accessories and PVC insulated, FRLS, 1100 volt grade un sheathed copper conductor of 1.5 sqmm size cable earth wire connected to common earth including closed recessed wooden terminal boxes of suitable size made of 2nd class hard wood for mounting of switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet of Hylam/Mica make as top cover complete all as specified for the following:-

(a) One light point/fan point/buzzer point Exhaust fan point controlled by one switch.

(b) One socket out let 5 Amp on independent board complete

(c) One socket outlet 5 Amp on same board with other switch complete

(d) One socket outlet 6 Amp on same board with other switch complete

(e) One socket outlet 6 Amp on same board with other switch complete

Wiring in surface/ressesed as requiredng for circuit/ sub main wiring along with earth wire with the following size of flame retardent pvc insulated copper conductor .single core cable in surface/ressesed as required of 2x4sqmm earth wire complete all as specified and directed,it should be done in casing caping.

Description all as per item No.59 here-in-before but with cable conductor 2.5 sq mm (Nominal size) & earth wire of 2.5 sqmm for socket outlet 15 Amp on independent board complete

Supply and Fixing switch piano flush button type 5 Amp single pole one way (ISI marked) complete.

Supply and Fixing switch piano flush button type 6 Amp single pole one way (ISI marked) complete.

Supply and Fixing switch piano flush type 15 Amp single pole one way ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing switch piano flush type 16 Amp single pole one way ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing socket out let multipurpose three pin 5 Amp and 2 pin 5 Amp flush type complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing socket out let multipurpose three pin 6 Amp and 3 pin 6 Amp flush type complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing socket outlet 2 in 1, three pin 5 Amp and 6 pin 15 Amp flush type (multi purpose) ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing socket outlet 2 in 1, three pin 6 Amp and 3 pin 15 Amp flush type (multi purpose) ISI marked complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing ceiling rose three terminal pvc/polycarbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing lamp holder ,PVC/Polycarbonate type with 9 Watt led bulb back plate suitable for batten fitting (angle /plain) complete all as specified and directed by Engineer-in-Charge.

S&F in replacement LED 1x22 watt for Decorative AC box type LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack., 230volts, 50 Hz including making necessary connection prewired and making connection with 3 core copper flexible cable of appropriate size from ceiling rose/PVC connector to light fittings complete all as specified and directed.

S & F in repair pressed sheet metal enclosure (MCB DB), single phase and neutral with 200 Amps rated bus bar, double door type, 240 volts complete for the following no. of way:-

Supply and fixing MCB 40 Amp SPN 240 volt AC supply rupturing capacity not less than 10 KA complete all as specified and directed by Engineer-in-Charge.

Supply and fixing MCB 6 to 40 Amp SP 240 volt AC supply rupturing capacity not less than 10 KA complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections twin core cable flat or circular 10 sqmm complete all as specified and directed by Engr-in-charge

Supply and fix in repair of Exhaust fan made of sturdy engineering plastic complete with louvre shutter.230 volt 50HZ.RPM 1200.copper winding of sweep 300mm. complete all as specified and directed ,

M&L Earthing complete with GI earth plate electrode of size 60cm X 60cm X 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including GI strip of size 32x6 mm up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of brass and protected by light grade 40mm dia upto 7.5 M&L mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover 50mm thick and PCC chamber pit with PCC 1:2:4 type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing making test point and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 including taking down old unserviceable complete all as specified & directed by Engr-in-charge.

Supply and fix in repair of Exhaust fan . Steel body ac single phase 230 volt of size 300mm sweep with blades and frame and louvers. Complete all as specified and directed

Supply and laying in replacement of XLPE insulated screened PVC bedded galvanised steel strip armoured electric power dable heavy duty 1100 Volt grade with stranded aluminium conductor of size16 Sq mm 4 core complete , all as directed .

Material & Labour for sand cushioning 15 cm below and 8 cm above the U/G cable laid (total depth of sand shall be 18 cm) complete all as specified & directed by Engr-in-Charge.

M & L for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other all as specified and directed at site.

S&F in replacement of LED luminaire 600mmx600mm ,40 watt 220 volt suitable for recess/ armstrong celling/ grid ceiling and POP mounting complete connection all as specified and directed

Street light fitting service bracket complete with 1.2m long G.I pipe 25mm dia med grade,45 degree bending making fixing arrangements with angle iron clamp as per the steel tublar pole dia ,incl nuts bolts,washer and painting with one coat of red oxide and one coat of silver paints all as specifird and directed,

Supply and fix of High power LED street light 35/36 Watt for building light IP 66 Energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaire with high power LEDs as light source and electronic driverof make Wipro or equivelent to Havells/ Phillips/ Bajaj incl suitable size service bracket fixed with clamps, nut, bolt and washer and electric connection with 1.5 Sqmm multistranded twin core alum cable PVC insulated complete all as spfd.

Deduct Credit for Demolished/Dismantled material Rs (-) 0.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.

KASHMIR FAIR DEAL SERVICES (BID ID -3095011)