MOEI , Fans installed at department of Trade , Taxes, Vyapar Bhawan, I.P. Estate, New Delhi.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. a) Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire.

c) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. a) 12 Module (200 mmX150 mm)

b) 8 Module (125 mmX125 mm)

c) 3 Module (125 mmX125 mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 6 pin 15/16 ampers socket outlet

b) 15/16 ampers switch

c) CAT-6 I/O with face plate.

Supplying and drawing of UTP 4 pairs CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit etc as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 Volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 Ampers tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note :- Vertical type MCB TPDB used for TPMCCB are required.) a) 8 way (4 + 24), Double door

Supplying and fixing 5 ampers to 32 ampers rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

Supplying, installation, testing & commissioning of energy efficient 1200 mm sweep size ceiling fan including wiring the down rod of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on fan box etc as required.

Supplying, Installation, Testing and Commissioning of wall fan of 400 mm sweep size oscillating type having plastic blade complete with all accessories such as front jali including connections etc as required.

Supplying, laying and fixing of following sizes PVC insulated and PVC sheathed armored aluminum conductor power cable of 1.1 KV grade on surface etc. as required. a) 4 X 25 sq. mm

Supplying, installation, testing & commissioning of energy efficient recessed/surface mounted type 34W to 38W full window glare free opal diffuser LED panel luminaries of size 595mm x 595mm (nominal size) suitable for both Armstrong/POP/Geypsum Board or grid false ceiling fabricated with MS powder coated white CRCA housing including mounting with the help of chain/other suitable method, hanging from the ceiling including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 34W to 38W LED should be 3600 with minimum system efficacy of 100 lumen /watt colour temperature 5500K to 6500K, power factor>0.95, CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram, Edison.

Supplying, installation, testing & commissioning of 20W to 22W, 6000K (1200 mm) energy efficient LED wall mounted light luminaries, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver, suitable to work on 230 volts, AC supply complete with connection etc. with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required at site.

Supplying and fixing of DP sheet steel enclosure on surface/ recess along with 25/32 Ampers 240 Volts "C" curve DP MCB complete with connections, testing and commissioning etc as required.

Supplying, installation, testing & commissioning of energy efficient surface mounted type 10W to 12W glare free opal diffuser LED Bulk Head luminaries including connections with 3 x 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required. The Total system Lumen of 10W to 12W LED should be 550 with minimum system efficacy of 100 lumen /watt, colour temperature 5700K to 6500K, power factor>0.95, CRI (Ra)>75, THD <10%, with APFC driver having driver efficiency >85%, operating voltage 150-270 volts with minimum 2.5KV surge protection. The luminaries shall be submitted with LM-80 report with a life of 50000 Hours @ L-70 and LED photo biological safety report conforming to IEC 62471 & LED source manufacturer and LM-79 report from NABL accredited Lab. The LED chip should be of Cree, Nichia, Philips Lumiled, Osram, Edison

Providing & Replacement of existing worn out following switch gears/accessories in the existing panel board including connection, testing and commissioning etc as required. a) 32/40 Ampers double pole isolator.

b) 63 Ampers Triple Pole & Neutral MCB

c) 125 Ampers, 16 KA, breaking capacity TPMCCB (thermomagnetic release) (Icu = 100% Ics)

d) 200 Ampers, 25 KA, breaking capacity TPMCCB (thermomagnetic release) (Icu = 100% Ics)

Less Credit for following dismantled electrical accessories under buy back arrangement including dismantling etc complete as required. a) Bunt out distribution board alongwith accessories

b) Ceiling fan

c) 40 watts box type fluorescent tubular fittings

Shaka Electrical (India)

Batra Engineers

Vivek Associates

M/s Bhagwat Associates

Anand Electricals

M/s Rahul Associates

M/s Cholia Electric works