Repairing work and Civil Work as per requirement at diff. municipal buildings under Diff. Budget and Buildings Related Works in Khokhra ward of South Zone.(ARC)

NAME OF WORK: - Repairing work and Civil Work as per requirement at diff.

municipal buildings under Diff. Budget and Buildings Related Works in Khokhra

ward of South Zone.(ARC)

AUTHORITY -- ENGINEER --

DY. MUNICIPAL COMMISSIONER (SOUTH ZONE) ADD. CITY ENGINEER-5 (SOUTH-ZONE)

AHMEDABAD MUNICIPAL CORPORATION AHMEDABAD MUNICIPAL CORPORATION

SOUTH ZONE OFFICE SOUTH ZONE OFFICE

Dr SHYAMA PRASAD MUKHRJEE BHAVAN Dr SHYAMA PRASAD MUKHRJEE BHAVAN

OPP. MANINAGAR FIRE STATION, RAMBAG. OPP. MANINAGAR FIRE STATION, RAMBAG

AHMEDABAD – 380008 AHMEDABAD –

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

TENDER FORM (SOUTH ZONE)

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTEMENT- (S.Z.)

Name of work :- Repairing work and Civil Work as per requirement at diff. municipal buildings

under Diff. Budget and Buildings Related Works in Khokhra ward of South Zone.(ARC)

Qty Description Rate

Demolition incl. stacking of serviceable materials &

1 disposal of unserviceable materials with all lead and

lift.(R&B SOR.2023-2024)

(a) R.C.C. work ( Pg.No.140, I.Code No.20002,

(b) Brick work in Cement mortar (Pg.No.140, I.Code

c 400.00 (C) Plaster (CH NO. 20 ,20045,PG NO -142) 19.38 Smt

(d) Tiles or Stone flooring (Pg.No.140, I.C. No.20005,

(e) Sheet roofing (G.I. Or A.C.) (I.No.20.27 I.C NO.-

(f) Doors,Windows ventilators (wood/steel) (I.No.20.49

Dismantling barbed wire fencing / Chainlink Fencing

including making rolls and also including dismantling

fanning posts including all earth work concrete in

the base and making good the disturbed ground

stacking unseal materials as directed and disposing all

the unserviceable materials with all leads al lifts &

carting to AMC Store as directed by engg. in charge

Excavation for foundation upto 1.5 m depth including

sorting out and stacking of useful materials and

disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or soft

soil(R&B SOR 2023-24,I.CNO.-

a 30.00 (a) 0 to 1.5 mtr depth 201.81 Cmt

b 30.00 (b)1.5 to 3.0 mt. depth. 222.72 Cmt

c 2.00 (c)3.0 to 5.0 mt. depth 243.62 Cmt

Earthwork in cuting in all sorts of soil and soft murrum

including conveying and spreading the stuff,

embankment as and where directed within 200meters

from the end of the cutting with all required lead and

lift.(R&B SOR 2023-24 I.C NO 04001A PG NO.46 + I.C

Conveyance charge of earth, lime, murrum, building

rubbish, manure, garbage, sludge, excavated rock, fly

ash, aggregates of any kind executed outside the road

5 100.00 site. Rate also includes spreading & levelling etc 78.54 Cmt

complete. Internal conveyance above 50 mt done within

the work site is not payable. Lead From 5 Km to 10 Km.

(Road Project Approved Rate)

Providing and laying cement concrete 1:4:8 (1 - Cement

: 4-Coarse sand : 8-Graded Brick bats aggregate 40 mm

6 10.00 normal size) and curing complete excluding cost of form 2634.11 Cmt

work in (A) Foundation and Plinth (upto 10 ton) (R&B

Provdg. & laying cement concrete 1:4:8 (1 cement :

coarse sand : 8 hand broken stone aggregates 40 mm

7 10.00 nominal size) and curing complete excluding cost of 2653.67 Cmt

form work in Foundation and plinth. (R&B SOR 2023-

Providing and laying controlled cement concrete M-200

and curing complete, excluding the cost of form work

and reinforcement for reinforced concrete work in: (R&B

(A) Foundations, footings, base of columns, and mass

concrete.(05024AA,Pg No.-56)

(B) Walls from top of foundations/level up to floor two

level. (05024BA,Pg.No.-56)

(C) Slabs, landings, shelves, balconies, lintels, beams,

c 10.00 girders and cantilever upto floor two 4460.36 Cmt

level.(05024CA,Pg.No.-57)

(D) Columns, pillars, posts and struts upto floor two

level. (05024DA,Pg. No.-57)

Providing & Applying Tri mix with De watering Machine

floter machine on constructed RCC work including

Machine & Labour etc Comp as directed (Approved

Filling Available Excavated Earth (Excluding Rock) In

Trenches,Plinth,Sides Of Foundations Etc.In Layers

10 30.00 Not Exceeding 20 Cm.In Depth Consolidation Each 129.10 Cmt

Deposited Layer By Ramming And Watering.(R&B SOR

Providing form work in ordinary timber planking so as to

give a rough finish including centering, shuttering,

strutting and propping etc. height of propping and

11 0.00 centering below supporting floor to celling not exceeding

4 M & removal of the same for in situ reinforced or plain

concrete work in (R&B SOR 2023-24 CH. NO 9, I. NO

(A) Foundation, footings, bases of columns etc. and

mass concrete.(09001AA, Pg. No.-78)

(B) Flat surface such as soffits of slabs, landing and the

b 50.00 like (I) Floors etc. 200 mm in thickness.(09001B1A, Pg. 252.00 Smt

(C) Vertical surface such as walls (any thickness)

c 50.00 partitions and the like including attached but tresses & 229.95 Smt

string course & the like.(09001CA, Pg. No.-78)

(D) Columns Pillars Posts and struts.(1) Square

Rectangular Polygonal in plan.(09001G1A, Pg. No.-79)

Provdg. & laying cement concrete 1:2:4 (1 cement :

coarse sand : 4 graded stone aggregates 20 mm

12 0.00 nominal size) and curing complete excluding cost of

form work and reinforcement for reinforced concrete

work in (R&B SOR 2023-24 CH. NO 5, I. NO 5.4.1)

(A) Foundations, footing, of columns and mass

concrete(05011AA,Pg. No.-53)

(B) Slabs, landings, shelves, balconies, lintels, beams,

b 10.00 girders and cantilever upto floor two 4012.47 Cmt

level.(05011BA,Pg.No.-53)

(C) Columns, Pillars posts and struts upto floor two

level.(05011DA,Pg.No.-53)

Providing TMT Bar FE 500 reinforcement for R.C.C.

work including bending,binding and placing in position

complete upto floor two level.(R&B SOR 2023-24,I.C

Brick Work Using Common Burnt Clay Building Bricks

Having Crushing Strength Not Less Than 35 Kg/Sq.

14 25.00 Cm. In Cement Mortar 1:6 (1 Cement : 6 Fine Sand) (A) 3981.21 Cmt

In foundation and Plinth (R&B SOR 2023-24, I.C NO.-

Extra for brick work in super structure above plinth level

15 50.00 upto floor two level (B) Conventional (R&B SOR 2023- 272.25 Cmt

Half Brick Masonry In Common Burnt Clay Building

Bricks Having Crushing Strength Note Less Than

16 50.00 Kg/Sq. Cm. In Cement Mortar 1:4 (1 Cement : 4 363.39 Smt

Coarse Sand) In Foundation and plinth

(R&BSOR2023-24,I.C NO.- 06008A2A,Pg. no.-)

Extra for half brick masonry in super structure above

17 50.00 plinth level upto floor two level. (B) Conventional (I.C NO 52.80 Smt

Providing cement plaster in single coat on brick/concrete

wall for interior/exterior plastering upto any floor level

finished even and smooth in CM 1:3 incl. finishing with

floating coat of neat cement slurry, with necessary

scaffolding etc. complete (R&B2023-24,I.C NO.,

Providing 20mm thick double coat sand face/mala

cement plaster on interior brick/concrete work for

plastering comprising o f base coat of 12mm thick

cement plasterin cement

19 500.00 mortar(1Cement:4coarsesand) in rough finishing and 269.78 Smt

8mm thick top coat of

cementmortar1:2(1Cement:2Coarsesand) finished with

trovel including scaffolding curing etc. complete.(R&B

Providing 10mm thick cement plaster in single coat for

plastering onceilings and sofits of stairs upto floor two

20 250.00 level for interior plastering and finished even and smooth 175.31 Smt

in (i)Cement mortar 1:3 (1- cement:3-sand) (R&B SOR

Providing and applying fibere reinforced cementitious

micro concrete work in cellings and beams incl.mixture

of CEMSCREED HM (F) fair mate company material,

FBR bonding agent material with water in suItable

proportion anti corrosive treatment on exposed

beam,celling steel bars with safeCore R incl.all kind of

labour etc.comp.including three coat of white

wash.(Approved Rate in ARC)

Providing And Laying Polished Kota Stone Slab

Flooring Over 20 Mm. (Average) Thick Base Of Cement

Mortar 1:6 (1 Cement : 6 Coarse Sand) Or Lime

Mortar 1:1.5 Laid Over And Joined With Grey Cement

Slurry mixed with pigmentt omatchtheshade of slab

including rubbing and polishing

etc.complete.(A)25mmthick. (R&B SOR 2023-24 P.121,

Labour work for moulding Polish kota stone surface rate

23 100.00 also including providing cutting and grinder machine for 150.00 Rmt

molding work etc comlete as directed.(app. rate)

Labour work for Polish kota stone surface rate also

24 100.00 including providing cutting and grinder machine for 64.00 Smt

molding work etc comlete as directed.(app. rate)

Providing And Laying Cement Concrete Flooring For

I.P.S.1:2:4 (For Indian Patent Stones) (1 Cement:

Coarse Sand:4 Graded Stone Aggregate 20 Mm.

Nominal Size) Lain In Layer Finished With A Floating

Coat Of Net Cement.(40 Mm Th.) (R&B SOR 2023-24

Additional Rate For Providing Water Proofing Solution in

P & L 24"x24" vitrified 8mm thick tile flooring over 20mm

(average) base of cement mortar

1:6(1cement:6coarsesand) on new surface or fixing on

existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color

cement slurry including finis ed with flush pointing &

cleaning the surfaceetc.complete for anti skit. (R&B

P & L 24"x24" vitrified 8mm thick tile flooring over 20mm

(average) base of

cementmortar1:6(1cement:6coarsesand) on new

surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed

with color cement slurry including finis ed with flush

pointing & cleaning the surfaceetc. complete for light

shade(R&B SOR 2023-24 P.123,I.C.No.-14022A)

Providing and Fixing pvc.Door (sintex door-equivalent)

29 300.00 with necessary alluminium fitting with EL-7 section 1617.00 Smt

frame (Approved Rate as per ARC)

Providing & laying polish kota stone (25 mm th,)

Sandwich platform. Work incl. provdg good quality &

even shade polish kota stone of required size having

uniform thickness. Work also incl. providing nece.

Dismentling of brick work for making jari to support the

etc.comp.(app rate)

P/F glass of 4 mm thik for vent lowers and window with

31 30.00 wooden border patti as per instruction of eng. In 150.00 No

chage.(app.rate)

Making hole in brick wall & all damaged work shall be

well repaired as per inst. etc. comp

Provdg. & fixing rubber plug for sink or wash basin.

Providing and fixing 30mm thick FACTORY MADE

SOLID PANEL PVC DOOR SHUTTER consisting of

frame made out of M.S. tubes of 19 gauge thickness and

size of 19mm x 19mm for stiles and 15mm x 15 mm for

top and bottom rails. M.S. frame shall have a coat of

steel primers of approved make and manufacture, M.S.

frame shall be covered with 5 mm thick heat moulded

PVC ‘C’ channel of size 30 x 50 mm forming stiles, and

5mm thick 75mm wide PVC sheets for top rail, lock rail

34 100.00 and bottom rail on either side, and 10mm (5mm x 2) 1135.02 Smt

thick, 20mm wide cross PVC sheet as gap insert for top

rail and bottom rail, Panelling of 5 stiles and rails with

30mm wide x 5mm thick PVC sheet beading on eighter

side, and joined together with solvent cement adhesive,.

An additional 5mm thick PVC strip of 20mm width is to

be stculk on the interior side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per direction

of Engineer in charge, manufacture’s specification and

drawing. (R&B SOR 2023-24 P.92,I.C NO.10043)

Providing and fixing approved standard brand factory

made PVC door FRAME of size 50 x 47 mm with a wall

thickness of 5 mm made out of extruded 5 mm rigid

PVC foam sheet mitred at corners and jointed with

2 Nos. of 150 mm long brackets of 15 x 15 mm

M.S.square tube the vertical door profiles to be

reinforced with 19 x 9 mm M.S.square tube of 19 guage,

EPDM rubber gasket weather seal to be provided

through out the frame. The door frame to be fixed to the

wall using M.S.screws of 65/100 mm size

etc.complete as per manufacturers specifications and

direction of Engineering in charge incl. medium grade

aluminium hardware all octroi, tax charges etc.complete

(R&B SOR 2023-24 I.C NO-10050 Pg. No.-97)

Providing and fixing Prelam PVC sheet wall paneling of

thickness 5mm consisting of panels having size 1220 x

2440 mm stuck on inner frame work of 50mm wide strips

of 5mm thick PVC sheet. The strips should have in their

center a grove of 6mm width asnd 1mm depth for sinking

the had of the screw using to fix the strips of the wall and

should be placed vertically at equal intervals of 10”

36 100.00 center to center. The PVC strips shall be fixed to the wall 944.00 Smt

using 65mm long M.S. scres through the groove in the

strip by using PVC fasteners. The distance between two

screws shall not be more than 200 mm. A groove of

2mm may be left at the joint of two panel for aesthetic

looks. The exact sizeof the panel and correspondingly of

the grid may vary depending on the size of the

wall.(R&B SOR.2023-24 ,I.C NO. 10054,Pg. NO.-100)

Providing and fixing 35 mm th. Shutters for doors

windows & clearstory windows incl. wood frames as

specified 12 cm. x 7cm. size incl. anodised alluminium

37 0.00 fixtures and fastenings including primer coat of

approved quality and two coats of oil paint etc.

complete.(R&B SOR.2023-24, I.C.No-10032a, 10032b,

a 20.00 (I) Fully glazed 4788.50 Smt

b 20.00 (II)Fully panelled 5478.89 Smt

c 20.00 (III) Partly panelled & partly glazed. 5133.69 Smt

Providing and fixing eco-friendly light weight calcium

silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra

Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per

B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size

X 595 mm to be laid on true horizontal level suspended

38 200.00 inter locking metal grid of hot dipped galvanized steel 1632.63 Smt

sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced

at joints to get required length and size of 24X38mm

0.30 mm thick (minimum) sheet, 1200mm centre to

centre, and cross ‘T’ of size 24X28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along

spaced between main ‘T’ at 600mm centre to centre to

form agrid of 1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of 0.30 mm

thick (Minimum) sheet (SOR 2023-24, P.128,I.C NO.

Providing and fixing complete sliding shutter solid PVC

window 25mm thick factory made glazed solid PVC

window shutter consisting of frame made out of M.S.

tube of 19 gauge of size 15 x 15mm for styles top,

bottom rail. M.S. frame shall have a coat of steel primer

of approved make and manufacture, M.S. frame shall be

covered with 4mm thick heat mouled PVC ‘C’ channel of

size 58mm x 25mm x 38-mm out of which 8mm shall be

bent at 90 degree towards inner side on front face of the

window shutter forming stiles. For top rail and bottom

rails, M>S. frame shall be covered with 4mm thick,

58mm wide PVC sheet out of which 8mm shall be bent

at 90 degree towards inner side on front face and 38mm

wide PVC sheet shall cover the M.S. frame at top and

bottom rail on back side of window shutter, 4mm thick

15mm wide cross PVC sheet as gap insert for top and

bottom rail. PVC sheet beading of 8mm thick (4mm x 2)

to be stuck internally with solvent cement adhesive in

top and bottom rails. Glass panel will be fitted externally

in the clear space available between stiles & rails and

fixed between PVC sheet of stiles and rails bent at

degree on front face 12mm x 123mm ‘L’ shape outer

PVC beading nailed on stiles and rails at the back side

so that ‘L’ shape outer PVC beading can be removed

when required for replacement of broken glass etc.

complete as per direction of etc. complete as per

direction of Engineer in charge and manufactuture’s

specification. (SOR 2023-24, P.98,I.C NO. 10052)

Providing and fixing full height Prelam PVC partition

system 50mm thick consisting of 40mm sandwich PVC

panel made out of 36mm high density expanded

polystyrene sheet (E.P.S. Thermocol) stuck on both side

with 2mm thick prelim PvC sheet reinforced with frame

work made from 35mm x 5mm M.S. angle. In between

two M.S. angles 4 mm with feathered edges shall be

fixed on floor and 50 x 75 mm with feathered edges

prelim PVC “C” channel of size 50mm x 75mm with

feathered edges prelim PVC panel shall be inserted in

40 200.00 the PVC ‘C” channel The first and last M.S. angle should 2152.00 Smt

be erected such that it is inside a PVC C channel of size

50 x 75mm In between adjoining EPS sandwiched PVC

partition panel 4mm thick x 75 mm width prelim PVC

sheet feathered at edges shall be stuck on front and

back face using solvent cement etc. An additional 4mm

thick PVC strip of 40mm width is to be stuck on the intrior

side of the ‘C” channel using PVC solvent adhesive

completeas per direction of Engineer in charge.

Manufacture’s specification and drawing. (SOR 2023-

Providing and fixing full height Plan/colour PVC partition

system 50mm thick consisting of 40mm sandwich PVC

panel made out of 36mm high density expanded

polystyrene sheet (E.P.S. Thermocol) stuck on both side

with 2mm thick plain PVC sheet reinforced with frame

work made from 35mm x 5mm M.S. angle. In between

two M.S. angles 4 mm thick plan heat moulded PVC ‘C’

channel of size 50mm x 100 mm with feathered edes

shall be fixed on floor and 50 x 75 mm with feathered

edges plain/printed/prelim PVC ‘C’ channel shall be

fixed in the ceiling. Sandwich PVC panel shall be

inserted in the PVC “c” channel. The first and last M.S.

angle should be erected such that it is inside a PVC C

channel of size 50 x 75mm. In between adjoining EPS

sandwiched PVC partition panel 4mm thick x 75mm

width plain PVC sheet feathered at edges shall be stuck

on front and back face using solvent cement etc. And

additional 4mm thick PVC strip of 40mm width is to be

stuck on the interior side of the C channel using PVC

solvent adhesive complete as per direction of Engineer

in charge, manufacture’s specification and drawing.

Providing and fixing fibre insulations board lining with

42 0.00 butt jointing and Nails (frame worked cover fillets to be

measured and paid for separately)

20.00 (ii) 18mm thick (SOR 2023-24, P.127,I.C NO. 16003B) 353.97 Smt

20.00 (iii) 25mm thick (SOR 2023-24, P.127,I.C NO. 16003C) 434.03 Smt

Providing and Fixing 12 mm Thick Cement Fibre Board

Providing and Fixing playwood lining with but jointed and

44 0.00 nails (frame work and cover fillets to be measured and

paid for eparately)

20.00 (ii) 12mm thick (SOR 2023-24, P.127,I.C NO. 16004B) 399.08 Smt

Providing and laying white glazed tiles 6mm thick in

flooring treads of steps and landing laid on a bed of

45 900.00 12mm thick cement mortar 1:3 (1-cement : 3-coarse 908.17 Smt

sand ) finishing with flush pointing in white cement.(SOR

Providing And Laying Glazed Tiles 6 Mm Thick

In skirting risers of Steps and dedo 10Mm Thick

46 750.00 Cement plaster 1:3 (1Cement : 3Coarse 1044.23 Smt

Sand)Finished With Flush Pointing In White Cement

slurry.(R&B SOR 2023-24 PG NO-120,14009AA)

Providing and laying coloured glazed tiles of the size

skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry.(R&B SOR 2023-24 PG NO-

Providing and fixing rough cast wired glass 6 mm thick

bedded in putty and thick with wooden beading including

48 0.00 the cost of wooden beadings of Indian teak wood and

necessary cutting of glass. (R&B SOR 2023-24, PG NO-

20.00 (C) wired figured glass. 559.26 Smt

Supplying and fixing Nimbhada ladi 37 to 50 mm thick

for walk-way, covering the activity of excavation,

ramming, Laying on sand bedding as per requirement to

fix the Nibhada Stone in Line & Level with cement

pointing in cement mortar 1:2 etc complete as

directed.(AMC Drainage SOR Jan-2016)

Labour work for fixing above or any interlocking

blocks/nimbhada on up to 50mm th sand

bedding,levelling,watering anf fixing. Rate incl. average

50 100.00 30cm depth for excavation and or filling,carting away 69.64 Smt

debries/excavated material up to 5 km and cleaning the

site etc.comp. as directed. (AMC Drainage SOR Jan-

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed

tiles to be laid over cement mortar 1:3 to plain or slope

and to be tempered to bring mortar creme out upto

surface using white cement including rounding

off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as

directed.(R&B SOR 2023-24 P.124,I.C NO. 14035)

Providing Cement Vata (10 Cms X 10 Cms)Size

Quarter Round In Cement Mortar 1:1 Including Near

Cement Finishing, Watering Etc. Complete.(R&B SOR

Providing, supplying and fixing precast C.C. blocks (M-

20) edge kerb having size of 75 x 300 x 300 mm depth

and as per design conveying it to the site, jointing into

C:M 1:3 and racking out the joints incl. necessary

excavation of asphalt, soil etc..completed.- (AS PER

ROAD PROJECT APPROVED RATE)

Conveyance charge of earth murrum, building rubbish,

manure, garbage, sludge, excavated rock,fly ash,

aggregates of any kind etc.comp (R&B SOR 2023-24

Providing & Fixing M.S.Grill,Gate,Elevation Element Of

Decorative Pattern With M.S.Channel,Flat,Medium

1000.0 Grade M.S.Pipe,Square Or Round Bars With Round

0 Heanded Bolts,Nuts,Or By Screw.Incl.Applying One

Coat Zinc Primer And Two Coat Of Oil Paint

Etc.Comp.(As Per A.R.C)

Providing and laying polished granite stone slab 18 mm

thick in risers of steps, dedo and pllars laid on 10 mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) and

jointed with gray cement slurry including rubbing &

polishing etc. complete. (R&B SOR 2015-2016,SR. NO.

Providing & fixing 2.00 mm thick F.R.P. sheet of good

quality and standard make rate also includes necessary

fabrication structure in the grid of 1'-6" x 1'-6" size usiung

hollow pipe of size 3/4" x 3/4" , 2" x 1" & 1" x 1" rate also

57 100.00 inclusive necessary bending ,cutting and fabrication 1865.00 Smt

charges and priming coat and 2 coats of oil paint of

shade approved by engineer in-charge rate also

includes washer and silicon paste required for fixing the

sheet in good quality as diredted.(As per ARC)

Carrying out plinth treatment to post construction /

exsiting structure by spraying chemical solution for

58 100.00 termite control treatment incl. labour and materials 104.90 Smt

consistant with I.S.I specification.(R&B SOR 2023-24,

Carrying out timber treatment to all wood work incl.

drilling holes and spreying oil based chemical solution

59 100.00 on surface ot timber work for termite contorl including 54.98 Smt

labour and materials etc. comp (R&B SOR 2023-24, PG

Provdg. & fixing 100 mm size P or S trap for water

closet squatting pan incl. jointing the trap with the pan &

soil pipe in cement mortar 1 :1 (cement : 1 fine sand)

20.00 (A) Vitreous China : 311.85 No

Providing and fixing wsh down water closet

(Europeantype,W.C.Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

61 25.00 Mortar1:1(1-Cement:1-finesand) (Sea land cover to be 1290.80 No

measured and paid for separately) (A)vitreous China

Pattern :(i) in white colour (R&B SOR 2023-24, PG NO-

Provdg. and fixing water cloest squatting pan ( indian

type W.C. pan) size 580 mm ( Earth work. Bed concrete,

foot rests and trap to be measured and paid for

separately) (A) Vitreous China : (1) Long pattebn white

colour. including puffin cement mortar 1 :3 (1 cement :

62 25.00 coarse sand) a pair of white virteous China 250 mm x 1065.16 No

130 mm x 30 mm foot rest for long patten swuatting pan

water closet. including Provdg. & fixing G.I. inlet

connection for flush pipe with W.C. pan. (R&B SOR

Providing and fixing washbasin with single hole for pillar

tap with C.I. or M.S. brackets painted white including

sutting holes and making good the same but excluding

fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour.(R&B SOR 2023-

Provdg. & fixing C.P. Brass screw down bib taps of

64 0.00 following size (R&B SOR 2023-24 PG NO-

a 50.00 (I) 15mm dia 184.98 No

b 50.00 (II) 20mm dia 212.68 No

Providing & Fixing Angle Cock Of "Ess Ess" Trend

65 25.00 Series Or Equivalent Standard Make As Approved By 602.68 No

Engg.In Charge All Complete.(N.S.) I00103

Provdg. & Fixing Gun Metal Check Or Nonruturn

66 50.00 Full Wheel Valve. (A) 15 Mm Dia(R&B SOR 2023-24 184.98 No

Provdg. & fixing C.P. Brass screw down bib taps of

following size (B) Brass chromium plated screws down

Bib Tap.(R&B SOR 2023-24 PG NO-167, 23028B1 &

a 50.00 (I) 15mm dia 184.98 No

b 50.00 (II) 20mm dia 212.68 No

Providing and fixing pillar tap, capstan head, screw

down high pressure with screws, shanks and back

nuts.(R&B SOR 2023-24 PG NO-167,23029A &

b 50.00 (ii) 20mm dia. 351.18 No

Providing and fixing chromium plated brass half

trun flush cock of approved quality including fixing in

pipe line etc. complete.(R&B SOR 2023-24 PG NO-

b 50.00 (ii) 25mm dia. 261.16 No

c 50.00 (iii) 32mm dia. 273.03 No

Provdg. & fixing ball cock of approved qaulity as

70 0.00 directed.(R&B SOR 2023-24 PG NO-

0.00 (A) Copper metel.

50.00 (II) 50 mm dia 187.96 No

0.00 (B) Abonite.

50.00 (II) 50 mm dia 136.52 No

Providing and fixing Urinal of approved quality including

connection with trap and with integral longitudinal flush

71 25.00 pipe.(A) Squating plate pattern white earthenware 102.00 No

550mm x 300mm (R&B SOR 2023-24 PG NO-

Providing and fixing Urinal or approved quality including

conecting the Urinal with waste pipe , tap etc.

72 25.00 complete.(B) White earthenware flat back or corner type 1535.63 No

size 430mm x 260mm x 350mm.(R&B SOR 2023-24 I.C

Waste Pipe for Wash basin C.P. 32 mm dia (R&B SOR

Providing and fixing C.P. brass shower rose with 15mm

74 50.00 or 20mm inlet.(A) 100mm dia. Each (R&B SOR 2023-24 279.37 No

Providing & Fixing Chromium Plated Brass Flush

Cock With Lever Of "Ess Ess" - Trend Series Or

Equivalent Make Incl.Fixing In Pipe Etc.Comp.As

Dir.Of Engg.In Charge.(N.S.) (1) 25 Mm Dia.I00117

Provdg. & fixing 600mm x 450 mm Bevelled edge mirror

of superior glass mounted of .6 mm th. A.C. sheet or

76 25.00 plywood sheet and fixed to wooden pluge with C.P. 825.48 No

brass screws and washers.(R&B SOR 2023-24 PG NO-

Provdg. And Fixing Cast C.I.(Span) Nahni Trap Of

The Following Nominal Diameter Of Self Clenising

Design With C.I. Scread Down Or Hinged Gratiing Incl.

Cost Of Cutting & Making, Good The Walls And Floors

100 Mm Inlet And 50 Mm Outlet Etc.Comp.(R&B SOR

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down

or hinged grating including the cost of cutting and

making good the walls. (R&B SOR 2023-24 PG NO-

Provdg. & fixing plastic seat & cover for wash down

79 0.00 water closet with C.P.brass hinges and rubber

buffers.(R&B SOR 2023-24 PG NO-166,23017)

50.00 (B) plastci seat & cover 288.45 No

Providing and fixing PVC 12.5 Litres high level C..I.

flushing cistern with A pair of C.I. or Mild steel brackets,

womplete with fittings such as syplionic arrangement,

15mm nominal size brass ball valve with polythene float,

lever G.I. China (60 cm. ) and pull union and couplings

for connections with inlet, outlet and overflow pipes etc.

including cutting holes in walls and making good the

same (overflow pipe to be measured and paid fo

separately ) (R & B SOR 2023-24, Pg.No.165, I.Code

P/F Jet Spreay at Europeon WC Pan, incl nece. lath

connection, stop cock, and other fixing material and

labour as per inst. of engineer in charge (R&B SOR 23-

Providing erecting and fixing double coated ISI water

10000. tank of required capacity each with all necessary fittings

00 and connection etc.complete on terrace.(R&B

SOR2023-24 PG NO.-158,I.C NO-22014)

P&F Door closers (Heavy type of 765 number) Hardwire

83 10.00 or Everite Prabhat or Equivalent. (R&B SOR2023-24 516.50 No

Providing & Fixing app. Quality for conseal lock in alu.

84 10.00 Door. As per inst of engg in charge. 300.00 No

Etc.comp.(App.Rate)

85 0.00 Providing & Fixing app. Quality different type of latches

Brass baby latch(door closer) As per inst of engg in

a 50.00 charge. Etc.comp.(R&B SOR2023-24 ,I.C No. 273.57 No

Locks Godrej Night latch.(R&B SOR2023-24 ,I.C No.

Latch for steel window 25 cms to 35cms.

Alluminium.(R&B SOR2023-24 ,I.C No. M362+12005)

Latch for steel window 25 cms to 35cms. Brass. (R&B

Latch for steel window 25 cms to 35cms. Iron oxidized.

P&F Aldrop 20mm. dia Size with necessary fitting Iron

86 0.00 Oxidised(R&BSOR202324,I.CNo.M022,M023,M024)+(

a 20.00 20cms. Length 41.77 No

b 20.00 25cms. Length 46.00 No

c 20.00 30cms. Length 54.48 No

P&F Aldrop 20mm. dia Size with necessary fitting

87 0.00 Alluminium.(R&B SOR2023-24 ,I.C No.

a 20.00 20cms. Length 71.43 No

b 20.00 25cms. Length 73.12 No

c 20.00 30cms. Length 96.85 No

d 20.00 35cms. Length 113.80 No

P&F Aldrop 20mm. dia Size with necessary fitting

88 0.00 Brass.(R&BSOR2023-

a 20.00 20cms. Length 219.73 No

b 20.00 25cms. Length 236.68 No

c 20.00 30cms. Length 249.39 No

d 20.00 35cms. Length 274.82 No

P&F Aldrop 20mm. dia Size with necessary fitting Brass

89 0.00 Chromium Plated.(R&B SOR2023-24 ,I.C No.

a 20.00 20cms. Length 232.44 No

b 20.00 25cms. Length 245.16 No

c 20.00 30cms. Length 249.39 No

d 20.00 35cms. Length 274.82 No

P&F S.S. Handle for door/ window different size of ASIS

90 0.00 304 Grade. (R&B SOR2023-24 ,I.C No.(

a 20.00 10 cm Size 57.87 No

b 20.00 15 cm Size 79.05 No

P & F S.S. Stopper of ASIS 304.(R&B SOR2023-24 ,I.C

a 20.00 60 cm Long 360.17 No

b 20.00 30 cm Long 180.51 No

c 20.00 20 cm Long 126.27 No

Providing & Fixing In Position Alluminium Doors With

Frame Using Approved Quality Anodised Extruded

Alluminium Section As Approved By Engg.In

Charge(Jindal Alluminium) (A)Frame Sections

101.6x44.45 Mm(B)Shutter Bottom Vertical & Top

Section 83.5x44.45 (Wt.1.31 Kg/Mt.)(At

1.31Kg/Mt)(C)Shutter Bottom Section At14.3x44.45

Mm At (1.37 Kg/Mt) Shutter Middle Section At

100x44.3 Wt.(1.37Kg/Mt) Incl.Providing & Installing

Mm Thick Approved Color Acrylic Sheet Of Standard

Quality Fixed With Glazing Chips On Upper Pannel

& Laminated Sheet On Lower Pannel (Wtt.0.13

Kg/Rmt) Etc.Comp.As Direction Of Engg.In Charge.

Providing & Fixing In Position Alluminium Window

Sliding / Fix Type With Frame Using Approved

Anodised Extruded Alluminium Section As Approved

By Engg.In Charge.(Jindal Alluminium) Units

Equivalent (A) Frame Sections 65 X 25 Mm (At

0.41kg/Mt) (B) Sliding Frame Bottom Section Of

93 50.00 X31.75 Mm (At 0.41 Kg/Rmt) (C) Shutter Top & 2350.00 Smt

Bottom Section 40 X 18 Mm (Wt.0.41 Kg/Rmt) (D)

Shutter Interlock Vertical Section 10 X18 Mm.(0.41

Kg/Rmt) (E) Shutter Vertical Of 40 X 18 Mm (0.41

Kg/Rmt) Including P/F Installing 5 Mm Thick

Approved Color Acrylic Sheet Of Standard Quality

Etc.Comp.(N.S.)

Provding & fixing Aluminum section partition with

powder coating using 2.5'' x 1.5'' all section work incl.p/f

5 mm thick glass in upper portion and 10 mm th.

94 50.00 Novapan panel in lower section Work incl.fixing the 2500.00 Smt

partition in wall/floor with nece.screws,rubber gasket &

other fittings etc.comp. as directed by engg.incharges.

Providing & Fixing In Position Alluminium Vents With

Frame Using Approved Anodised Extruded

Alluminium Section As Approved By Engg.In

Charge.(Jindal Alluminium) Units Equivalent

(Approved Rate) Frame Section Of 63.50 X 38.50Mm

(Wt.0.68 Kg/Rmt) Incl.Providing & Installing 5 Mm Thick

Approved Color Acrylic Sheet Of Standard Quality

Etc.Comp. I00136

Providing and fixing in position collapsible steel shutters

with vertical channels 20 x 10 x 2 mm braced with flat

iron diagonals 20 x 5 mm size with top and bottom rails

of T_rin 40x 40 x 6 mm with 38mm dia, steel pulleys

complete with bolts, nuts, locking arrangements,

stoppers handles including applying a priming coat of

red lead paint. ( R&B SOR 2023-24, I. NO.11.6 11003A

Providing corrugated 0.80 mm (22 gauge) thick G.I.

sheets roofing fixed with galvanized iron ‘J’ or ‘L’ hook

bolts, and nuts 8 mm. dia with bitumen and G.I. limpet

washers filled with white lead complete excluding the

cost of purlines, rafters and trusses..(R&B SOR 2023-

Providing valleys 900mm overall in plain 1.6mm thick

G.I. sheet fixed with G.I. J or L Hooks, Bolts and nuts

98 125.00 glavanised iron J or L Hooks Bolts and nuts 8mm dia G.I. 1042.78 Smt

Limpet and bitumen washers complete.(R&B SOR

Providing and fixing rolling shutters of approved make

made of 80 mm wide M.S.laths interlocked together

through their entier length & joinned together at the enda

by & locks mounted on specially design pipe shaft with

99 0.00 bracket plates giudes channel & arrangement for inside

& out side locking with push pull operation incl. the the

hood cover & spring etc. including priming , oil painting

etc complete.(R&B SOR 2023-24 PG NO-

0.00 (A) Shutters having width below 3.5 meter 3469.35 Smt

Provdg. & fixing UPVC handle valve of Prince,Supreme

100 0.00 , Astral, finolex or equivalent make as per dir. Of engg.

In charge.(App. rate)

Provdg. And fixing to wall ,ceiling and floor 6.00 kg.

F/Sq.Cm working pressure polythelene pipes of the

following outside diameter, low, density, complete with

special flange compression type fittings, wall clips etc.

making good wall ceiling and floor. (R&B SOR 2023-24,

a 25.00 20mm dia 78.12 Rmt

b 25.00 25mm dia 100.49 Rmt

P/F. To Wall Ceiling And Floor 10.0 Kgf/Cm2 Working

Pressure Pvc Pipes Of The Following Outside Dia

Complete With Special Flange Type Fittings,Wall

Clamps Incl. All Necessary Fittings Etc. Complete. (At

Any Floor Level) (R&B SOR 2023-24, I.C NO-23004C

c 25.00 32mm dia 116.40 Rmt

d 25.00 40mm dia 124.43 Rmt

e 25.00 50mm dia 165.38 Rmt

f 25.00 75mm dia 274.68 Rmt

g 25.00 110 mm dia 332.91 Rmt

Provdg. And fixing to wall, ceiling & floor in true line and

level UPVC pipe Schedule- 40 of Prince , Supreme

astral , finolex or equivalent make as approved by engg.

incharge. pipe shall be fix on wall with the help of clamp

at every twi meter center to center of shall be concealed

as directed in cluding neccesarry fitting etc. in cluding

testing of pipe and jointd and fixing the same with

adhesive solvent , including cost of all materials of

following nominal bore (R&B SOR 2023-24 ,I.C. NO.

Providing and supplying Lowering, laying and jointing ISI

marked only standard length Stonewate pipes in

standard lengths of following class and diameter with

cement joints in C.M.1:1 proportion in proper position

grade and alignment at all level as directed by Engineer-

in- charge including conveyance from stone to site of

work, Jointing material etc.comp. including all

taxes,insurance, transportiton, fright charges,

octroi,inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc.

complete (IS - 651 - 1989) Class AA (GWSSB SOR

2022-23) Part-1&2 A (Material Sec ) It.No.11.1, Class

A, Pg.No.17 + (GWSSB SOR 2022-23) SECTION : 1 &

2.B - LABOUR It.No.14, Pg.No.40

P/F. to wall ceiling and floor galvanized mild steel tubes

(Medium grade) of the following nominal dia. with all

105 0.00 tube fittings and clamps incl. making good the wall,

ceiling and floor. (At any floor level) (R&B SOR 2023-

Providing & Fixing 15 Cm Wide Chicken Mesh Jali With

Nails & Then Application Of 15 Mm Plaster On

R.C.C.& Masonary Joints As Per Dir.Of Engg.In Charge

Extra rate over item of excavation of earth for excavation

of asphalt pavement of thickness including demolishing

107 0.00 the asphalt carpet,metal,soiling etc.comp. with stacking

the material as directed.(AMC DRAINAGE SOR JAN-

0.00 upto 0.20 meter thickness (By Manual) 71.10 Smt

Making connection to the ex.M.H.in running sewer incl.

Dewatering and other required machinery etc. of

following dia pipes at any convenient time. All damaged

work shall be well repaired as per instructions.

etc..complete. (a) 150 mm to 300 mm dia(Based on

Drainage SOR 2009-10)

Providing Kachha of Pakka Dummy in the following dia

pipes and removing the same after completion of the

connection work as directed (Based on Drainage

a 20.00 (A) 100 mm to 300 mm dia. 223.00 No

b 2.00 (B) 350 mm to 600 mm dia 339.00 No

Supplying Pneumatic Breaker Machine for RCC Slab or

Asphalt Demolishing Work on site by using Operator,

fuel, power Supply etc. Complete as Directed. (No

110 10.00 payment should be allowed for non working condition of 535.71 Hr

machinery and for pipe line excavation and M.H. work.

Allowed only for break down work) ( Based on

Previously approved rate by C E sir )

Supplying Mazdoor for misc. work like Restetment

Pavment, excavation, refilling, demolishion,levelling

111 25.00 work & other miscellanous work.(AS PER LABER 403.57 No

SKILL DEVELOPMENT & EMPLOYEMENT

DEPARTMENT GOG CIRCULAR DATED 01.04.2023)

Supplying carpenter for repairing doors with nece

material like stopper, hinges, handle, glass etc comp. as

112 25.00 per instruction of Engineer in charge etc.(AS PER 423.21 No

LABER SKILL DEVELOPMENT & EMPLOYEMENT

DEPARTMENT GOG CIRCULAR DATED 01.04.2023)

Providing fiiter for D.I./P.V.C./C.I./M./A.C. Pressure

water pipe linmaintenance work with necessary

manpower, tools, plants, and equipments, and any other

113 25.00 works required for AMC as per instruction of Engineer in 423.21 No

charge etc. complete. (AS PER LABER SKILL

DEVELOPMENT & EMPLOYEMENT DEPARTMENT

GOG CIRCULAR DATED 01.04.2023)

Providing and fixing 1.20 Metre high fencing with

Metre long M.S. Angle posts 40mm x 40 mm x6 mm and

oil painting 3 coats fixed at 2.5 Mt,C/c. with five

Horizontan lines and two diagonals of galvanised steel

114 50.00 barbed wire weighting 9.38 Kg. per 100 Metre, strained 385.40 Rmt

and fixed to posts with G.I,staples including fixing the

postsin ground with 0.5 M x 0.5.M x 0.5 M. block in

C.C1:5:10 etc complete.(R&B SOR 2023-24 PG NO-

Reparing of existing Aluminium window/door/partition by

making necessary addition/alteration in same sides.

Rate incl of necessary fittings required and all labour

115 50.00 included. If necessary rate also incl. of removing from 500.00 No

position and refixing it at same place after repairing it,

etc comp. as directed. (Sub Desc : As per approved

rate of AMC MET work I01334)

Rapairing Of Door & Window (Wood).It Also Including

Labour Charges For Erection And Fixing Door

Shutter & Frame Etc.And Necessary Repair As Per

Site Condition.(N.S.) I00375

Repairing of Doors/Windows shutters and Frames

including refixing-aligning shutter, providing, replacing,

117 12.00 fixing MS hinges, Aluminium aldrops, stoppers, tadi etc. 250.00 Smt

complete excluding painting as per

specifications.(app.rate)

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size ;

shape (Usually Uni-Paver Blocks) using black trap good

quality aggragate of 20 mm nominal size for footpath,

parking areas, service lanes and other areas as

mentioned in the drawing / instruction of engineer in

charge. Cost includes formworks using rubber mould,

Rate providing and laying paver blocks as per required

grading and specification. The paver block shall be

mechanically compacted. The work of paving blocks

shall be executed in line and level by skill mason of

flooring work only. It should be laid in such a way that

the no cutting of the paver block to be necessary. if

cutting of paver block necessary then it should be cut by

machine only and carting. The finished surface of the

paver block shall have resonably good, plain finished.

Paver blocks shall be compacted and shall be relaid if

necessary. Gravel or such type of materials shall not be

allowed for production. Laying on 5cms thick sand

beddding. (Approved Rate by Road Project)

Providing & Fixing Door hinge spring include with

119 20.00 necessary all fixtures as dircted by engg.in charge 1175.00 Smt

etc.comp. (app.rate)

Providing & Fixing wall,ceiling and floor 10 Kg.F/Sq.Cm

160 mm working pressure polythelene pipes of low

120 20.00 density, complete with special flange compression type 785.00 Rmt

fittings,wall clips etc.making good wall ceiling and floor

as directed by engg.in charge etc.comp.(app.rate)

P/F. 10 mm thick Novapan sheet of approved quality

121 20.00 including fixing on partition with necessary all fixtures as 1400.00 Smt

directed by engg.in charge etc.comp (app.rate)

Labour charges for removing of Alum. Door / partition /

Alum. Window / M.S Grill etc. (app.rate)

Providing, Fabricating and Erecting in position anodised

(15 to 25 micron of desired colour) door shutter (double

action opening) of standard aluminum section from

18mm (3/4”) series of Jindal or approved equivalent

make of size top and vertical style 47.62 x 44.45 x 2mm

( w approx = 1.05 kg./m), lock rail and bottom section

123 25.00 114.30 x 44.45 x 2mm ( w approx = 1.83 kg/m), fitted on 4515.28 Smt

frame of size 101.60 x 44.45 x 2mm ( w app =

kg./m) with standard accesories like handle , stopper,

locking arrangement, C.P. brass hinges, etc, and

glazing of 5 mm thick float glass of Mody or approved

equivalent , fixed with rubber / PVC beading in upper

and lower panel complete. (app.rate)

Providing, fabricating and erecting in position anodised

(15 to 25 micronof desired colour) aluminum fixed glass

windows / partitions made up from standard aluminium

section from 18mm (3/4“) series of Jindal or approved

equivalent make of size 47.62 x 44.45 x 2mm (w app =

124 25.00 1.05 Kg/m), fitted on frame of size 64 x 40 x 2 mm ( w 2932.00 Smt

app = 1.09 Kg./m) with all standard accessories and

glazing of 5mm thick flaot galss of Mody or approved

eauivalent , fixed with rubber / PVC beading etc.

complete as per details including all fittings and fixtues

& locking arrangement completes. (app.rate)

Pro. And fixing single layer water proof gypsum board

12.5 mm thick sections using water proof board of size

1220 mm x 1830 mm x 8.0 mm suspended by GI

suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm

at 1220 mm center to center ceiling section of size

mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter

channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at

edges & drops incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting cleat,joining compound

top coat on ceiling incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail drawing as

directed(At any floor level) (R&B SOR 2023-24 PG NO.-

GLASS FILMS (sun control, Safety film, decorative,

reflective, frosted, opaque film etc) Imported Lumaar

make as approved by engg.in charge etc.comp.

Providing and fixing 4 mm th. Acrylic sheet of approved

quality including fixing with door/window shutter &

frames with necessary all fixtures as dircted by engg.in

charge etc.comp. (app.rate)

Repairing of Spalling in concrete with modified cement

mortar & SBR including surface preparations and

128 20.00 applying bonding coat and rust converter of approved 400.00 Smt

brand etc. comp. including scaffolding, finishing with

cement slurry As directed (app.rate)

Providing & Fixing Floor Spring including fixing shutter

129 10.00 etc. complete as per inst. of engineer in charge. 3300.00 No

P/F. thermocol ceiling with necessary aluminium T

section 25 x 25 x 1.2 mm inclusive fixing it to all wall to

ceiling junction and at junction position of two sheets

130 75.00 ,item also includes p/f 20 mm thick plain thermocol 375.00 Smt

sheets size (1 x 0.5 mt) with all necessary fastening and

hardware etc. comp.as dire. (At any floor level)

Removing dry or oil bound distemper by a washing and

scraping and sand papering the wall surface smooth

including necessary repairs to scratches complete.(R&B

Extra over item for removing dry oil bound distemper on

132 100.00 ceilings and sloping roofs.(R&B SOR 2023-24 PG NO.- 1.58 Smt

Distempeing (Two coats) with oil bound washable

distemper of approved brand and manufacture and of

required shade on wall surfaces to give an even shade,

over and including a priming coat with distemper primer

133 200.00 of approved brand and manufacture after thoroughly 76.08 Smt

brushing the surface free from mortar dropping and

other foreign matter and also including preparing the

surface even and sand papered smooth..(R&B SOR

Extra over Item for every subsequent coat of approved

134 100.00 brand and manufacture.(R&B SOR 2023-24 I.C.NO. 30.09 Smt

Extra over Item or distempering with oil bound washable

135 100.00 distemper on celling and sloping roofs.(R&B SOR 2023- 8.04 Smt

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

surface to give an even shade including throughly

brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.(R&B

Extra over item for every subsequent coat of wall

137 100.00 painting with plastic emulsion pain of approved 33.39 Smt

brand.(R&B SOR 2023-24 I.C.NO.18032)

Extra over item 119 for painting with plastic emulsion

138 100.00 paint of approved brand on ceilings and sloping 2.21 Smt

roofs.(R&B SOR 2023-24 I.C.NO.18034)

Applying two coats of Birla (white cement based) or

Asian (acrylic lapy- putty) or equivalent & two coats of

primer of approved brand and manufacture on new wall

139 200.00 surface to give an even shade including thoroughly 40.19 Smt

brushing the surface free from mortar dropping and

other foreign matter and sand papered smooth.(R&B

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape

even shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered

materials.etc complete(R&BSOR 2023-24 PG NO.-139,

Providing and fixing Polycarbonate roof Lexan sabic

mm th.sheets of approved make, on structural roofing /

sky ligh structures in shapes as per Architect’s drawing.

The rate shall include cost of scaffolding, screws, nuts,

bolts and all necessary fixtures and fastening etc

complete (Rate excluded structural steel work)

Painting two coats (excluding priming coat) on new steel

and other metal surface with enamel paint, brushing,

interior to give an even shade including cleaning the

surface an even shade including cleanicn the surface of

all dirt, dust and other foreign matter.(R&B SOR 2023-

Painting two coats (excluding priming coat) on new

wood and wood based surface with enamel paint,

interior to give an even shade including cleaning the

surface of all dirt, dust and other foreign matter sand

papering and stopping.(R&B SOR 2023-24 PG NO.-

Painting Two coats (excluding priming coat) on

previously painted steel and other metal surface with

144 20.00 enamel paint, brushing to give an even shade including 104.75 Smt

cleaning the surface of all dirt, dust and other foreign

matter.(R&B SOR 2023-24 PG NO.-136, 19003+19004)

Painting one coats (excluding priming coat) on

previously painted wood and wood based surface with

145 20.00 enamel paint, to give an even shade including cleaning 55.13 Smt

the of all dirt, dust and other foreign matter.(R&B SOR

Labour charges for cleaning U.G. & O. H. tank by

modern science technology with six stage process as

below (1) Dewatering existing water by submersible

pump. (2) Hydrojetting by 150 kg. per sq.cm pressure.

(3) Vaccum cleaning to suck the sludge & Turbidity on

bottom surface (4) Heat air system by 80 degree c. tmp.

for drying corners & all sides of tank. (5) Anti bacterial

chemical spraying to all surface of tank and then (6)

Ultra violet radiation pan Treatment to tank in this six

stages on site classic supply etc. shall be provided by

Muni. Corporation. without charging any extra cost. The

complete tank ckeaning by mono cleaning systems as

directed, rate of above process are as below capacity of

tank. (Approved Rate)

Providing and fixing of mirrors of 5 mm thick on walls of

wash basin counters , toilet area etc, including all

hardware and fixing details and position as per

consultant design and drwaings of the consultant, as

directed and to the satisfaction of the Consultant /

Engineer in charge. (Approved Rate)

Supplying and installation of 10mm thick recycled rubber

flooring having anti-skid and sound absorbing

properties, square shaped, with different color optns for

create flooring pattern, should be installed with proper

adhesive as per manufactures's guidelines, joints of

surface to be done properly to prevent dirt &

watepenetration inside the surface. etc complete as per

instruction of engineer in charge (Approved Rate)

Providing and Fixing Metal Jali, making of Wooden Patti

149 10.00 Frame of size 25 mm x 25 mm for Ventilation etc. 1437.00 Smt

complete as directed. (Approved Rate)

Providing and fixing 35mm thick flush shutter for doors,

windows & clearstory windows incl. Indian teak wood

frames 12 cm x 7 cm including anodized alluminium

150 0.00 fixture and fastenings incl. primer coat of approved

quality and two coats of oil painting etc. complete.(Fully

pannele or partly panneled and partly galzed door)

(Approved Rate)

10.00 Flush shutter with both side laminate 4800.00 Smt

Arrangement of zula with two or nece. skilled labour for

repairing & maintenance work out side building work

etc.complete as per insructer incharge(At any floor level)

(Approved Rate)

Providing Scaffolding for Demolition Plaster Work &

painting work by 'H' Frame Stand of by any means like

bamboo, balli etc. including carting material work site

and removing after completion of work. Rate include any

type rent etc. complete for any height as directed by

engg. in charge. (Approved Rate)

P/F of 1/2 HP submersible pump in underground

water tank with necessary connection,

153 15.00 starter,electrical fittings and water level controller 6321.43 No

(ISI marked )(R & B Electrical SOR Section 9-4-

Providing, Manufacturing, Fixing Chain Link Jali 8".0" X

4".0" as per detailed Sketch & instruction of Engineer in

Charge same as Lal Darwaja Garden Pattern Consisting

of 3" dia MS pipe A class 5".4" height fixed at 8".9" in

C.C. (1:2:4) block of 9" X 9" X 9" size chain link jali 2" X

2" X 10 gauge fixed in 35 X 35 X 5 mm MS angle frame

of 8".0" X 4".0" size with MS flat of size 25X3 mm welded

with jali etc. Comp. The Jali is to be Welded to MS angle

with MS Flat as per instruction given. The MS Pipe Jali,

MS angle frame are to be painted one coat of primer &

two coats of paint as directed, in line and level.The two

hold fast has been welded at equal distance at the

bottom angle of jali for support fixed in C.C. as directed

by Engg. in Charge. (Approved Rate)

Supplying & Fixing of bird protection net made from co-

polymer nylon net (U/V stabilised) having yarn breaking

155 100.00 strength 23.08 kg. including Necessary scaffolding etc 422.18 Rmt

complete as per instruction etc. complete as directed.

including all tax (App Rate)

The Rates are Exclusive of GST. Prevailing GST will be paid separately.

Contractor’s Quoted Rate

IN FIGURE IN WORDS

Net Quoted Tender Amount Rs.

Seal and Signature of the Bidder Add. City Engineer

mobile no. (South Zone)

AHMEDABAD MUNICIPAL CORPORATION

"South Zone Office", Opp. Fire Station, Rambaug, Maninagar, Ahmedabad - 380

Municipal Commissioner invites online Percentage Rate sealed tenders from interested contractors for

the work mentioned below.

1 Name of work Repairing work and Civil Work as per requirement at diff.

municipal buildings under Diff. Budget and Buildings Related

Works in Khokhra ward of South Zone.(ARC)

2 Time Limit 12 Months (Excluding Monsoon)

3 Tender Validity Period 120 days from the date of submission of the tender

4 Eligibility Criteria Register “C” class in PWD in Govt. R&B/CPWD/AMC or equivalent

registration with any other state Govt. or institutions.

5 Estimated Cost put to Rs. 1,11,00,000.00/-

6 Earnest Money Deposit Rs.1,11,000.00/- Demand Draft Or Bank Guarantee in favour of

Municipal Commissioner, Ahmedabad to be submitted as prescribed

7 Security Deposit 5 % of the Tender Amount in form of Bank Guarantee / Demand

Draft in favour of Municipal Commissioner, Ahmedabad to be

submitted as prescribed in tender.

8 Tender fees Rs.900.00/- Demand Draft in favour of Municipal Commissioner,

(Non refundable) Ahmedabad)

9 Submission of EMD and In separate sealed cover each for EMD and Tender Fees along with

Tender Fees Tender as described in the invitation of tender and submitted to

Assistant Manager (South zone), South zone office, Rambaug,

Maninagar Ahmedabad.

10 Tenders issue date Tenders from the amc.nprocure.com website shall be downloaded

from AS PER TENDER NOTICE INVITED

11 Last date of receiving As per Notice inviting Tender / Addendum / Corrigendum. The

Tenders. tenders received after latest schedule date and time will not be

entertained under any circumstances.

12 Date of Opening As per Notice inviting Tender / Addendum / Corrigendum to

Assistant Manager / Dy.C.E.(S/Z) office, 2nd Floor, South Zone

Office, Opp. Fire Station, Maninagar, Ahmedabad-380008

13 Mode of sending the Document shall be submitted in sealed envelope systems By

Tender Documents RPAD/Speed post/ Hand Delivery in sealed covers in Duplicate ( One

Original & One Duplicate) duly sign & seal by contractor .

14 Terms, Condition, & All general condition of contract mentioned in tender shall be

Specification applicable.

15 Defect & Liability The contractor shall be responsible to make good and remedy at this

Period own exppence any defect which may developed or may be noticed

before the period mentioned here under from the certified date of

complition, The within 15 days of recipts of the notice. In the case of

failure on the part of the contractor, the Engineer incharge may rectfy

or remove or reexecute the work at the risk & cost of the contractore.

The Engineer incharge shall be entitled to appropriate the whole or

any part of the amount of security deposit towrdes they expences, If

any, incurred by him in rectification, removal or re- execution. The

defect liability period shall be as under (a) for all works costing up to

Rs. 50,000 (amount put to tender), the period shall be three months

from the cirtified date of complition. (b) for all works costing more

than Rs. 50,000 and upto Rs. 1 crore (Amount put to tender) ,the

period shall be six (6) month from the cirtified date of compition or

one monsoon , which ever letter.(c) the major project costing more

than Rs. 1 crore , the period shall be 12 months from the cirtified date

of complition which should include one monsoon.(d) For building

works , the period specified in (a) ,(b) & (c) above or elapse of

monsoon period following cirtifide date of complition.,whichever is

letter . For the purpose of deciding the monsoon period, the

september may be treated as the last date.

16 Compansation for Delay 10 % of the balance work after Time limit expired as Peta Work

17 Deduction of Retention Retention @ 2% of the value of work done will be deducted from

Money from each RA each RA bill. It will be released along with release of payment of

Bill Final Bill.

18 Addendum/Corrigendum Addendum/Corrigendum If any Shall be Published 48 Hrs. Price To

the Final Submission Time And Date. The Same Shall From a part

Of Tender And The Same As to be Attached Along With The Tender

19 For E.P.F. Act. As per Account department cicular no.37, date-09/08/2018

20 GST As per AMC Finance Department Circular No. 38 dated 21-11-2022.

The Rates are Exclusive of GST. Prevailing GST will be paid

Conditional tenders will not be accepted. Municipal Commissioner reserves the rights to reject any or

all the tenders without assigning any reasons thereof.

Seal and Signature of the Bidder Add. City Engineer

ftuLx[tfxhle mne - rm¬tu એડી. િીટી ઈજિેર

btuctEj lkch mt&u (œrûtK Ítul)

Seal and Signature of the Bidder ADD. CITY ENGINEER

Seal and Signature of the Bidder ADD. CITY ENGINEER

AHMEDABAD MUNICIPAL CORPORATION

ENGINEERING DEPARTMENT

General terms & conditions

1. A booklet of FORM B-1 of Gujarat State Roads & Building Department / Water Resources

Department with the latest correction slips may be referred for quality of construction &

standard of Procedure (SOP). (only English version)

2. In the specification “as directed" / "approved" shall be taken to mean "as directed /

"approved" by the Engineering in charge.

3. Wherever a reference to any Indian standard appears in the specifications, it shall be taken

to mean as reference to the latest edition of the same of force on the date of agreement.

4. In "Mode of measurement" in the specifications wherever a dispute arises in the absence of

specific mention for a particulars point / aspect, the same in the relevant Indian Standards

shall be referred to.

5. All measurement and computations, unless otherwise specified shall be carried out nearest

to the following limits :-

i) Length, width and depth, Height 0.01 Meter

ii) Areas 0.01 Sq.mts.

iii) Cubic contents 0.01 Cu. mts.

In recording dimensions of work, the sequence of length, width and height (Depth) or

thickness shall be followed.

6. Definite particulars covered in the items of work, though not mentioned or elucidate in its

specifications shall be deemed to be included therein.

7. Approval of the samples of various materials given by the Engineer in charge or AMC's

Consultant shall not absolve the contractor from the responsibility of replacing defective

materials brought on site or materials used in the work found defective at a later date. The

contractor shall have no claim to any payment or compensation whatsoever on account of

any such materials being rejected by the Engineer in charge.

8. The contractor’s rate for the item of work shall be for the work completed in all respect.

9. All materials including those of electrical shall be got approved by the Engineer in charge/

Architect before using them in the work.

10. Materials as and when rejected by the Engineer in charge or AMC's Consultant shall be

removed from the site of work within 24 hours.

11. All work shall be carried out in a manner applying the best technique.

12. All tools, templates, machinery and equipment for correct execution of the work as well as

for checking lines, levels, alignment of the works & all precautionary measures during

execution shall have to be kept in sufficient numbers and in good working condition at the

site of the work.

13. Special modes of the construction not adopted in general Engineering practice, if proposed

to be adopted by the contractor shall be considered only if the contractor provided

satisfactory evidence that such special mode of construction and completion of work to the

required strength and quality. Acceptance of the same by the Engineer in charge shall not

however, absolve the contractor from the responsibility of any adverse effect and

concordance of adopting the same in the course of exaction or completion of the work.

14. The contractor shall be responsible for observing the rules and regulation imposed under the

"Minor Mineral Act", and such other laws and rules prescribed by the Government from time

15. All necessary safety measures and precautions (incl. those laid down in the various relevant

Indian Standard) shall be taken to engrave the safety of men, materials and machinery on the

work and also of the work itself.

16. Quantity measured in the tender is approximate. It may increase or decrease looking to the

quantum of actual work for which no any claim shall be entertained by A.M.C.

17. Contractor shall have to execute extra item if required only after necessary permission from

18. The work in general shall be carried out as per standard specifications of the relevant items

to be executed & as per the instruction of Engineer in charge & as per the guidance of AMC's

Consultant for this project.

19. The general terms & conditions of the contract shall be applicable & shall be binding on the

contractor. The contract agreement shall have to be executed between AMC & the agency to

which work is awarded for execution.

20. The time limit shall be reckoned after next day from the date of issue of the written work

order to the contractor after fullfillng the formality life SD & Agreement. No time extension

will be granted under any circumstances.

21. In case of any ambiguity in specifications mentioned in this tender, the interpretation given

by Add. City Engineer /Dy.M.C of A.M.C. will be final and binding to the Contractor.

22. The contractor shall take no advantage of any apparent error or omission in drawing or

specification and the Engineer -in-charge shall make such corrections and interpretations as

necessary to fulfill the intent of the plants and specifications.

23. The quantities of items in BOQ (Bill of Quantities) may vary in case of necessity arises.

24. All prevailing taxes/duties chargeable by State Govt./Central Govt. and the Municipal

Corporation. will be payable by the contractor.

25. No any kind of price rise / price escalation / price variation for cement , steel or labour shall

26. Contractor is requested to see the site physically before tendering. He is also requested to

quote the rates keeping in view of all the points mentioned in relevant pages of tender

27. Water Supply: The contractor shall arrange at his own cost, a suitable supply of piped water

for the construction of the works and provide a satisfactory supply of potable water for

drinking, washing, sanitation and cleaning down. The contractor will be responsible for all

the costs where applicable of connection, meter installation, water consumed, water required

for testing purposes, disconnection and the laying, maintenances and ultimate removal of any

distribution system around the site.

28. Electricity: Electric supply will be made available at the site by the Contractor and the

contractor must make his own arrangements with the Corporation and Electricity Supply

Authorities and with other contractors to connect and to take a supply from such services,

paying all costs in connection therewith.

The Contractor shall be entitled to use supply Electricity as may be available on the site for

purpose of the work and shall pay such charges as is fixed by the appropriate supply

In case there is any delay in supply of power site of any interruption or fault in the power

during the work. No compensation shall be paid for idle labor staff, machineries and for use

of diesel operating sets etc. as the case may be.

29. Tenders shall submit all the valid/certified documents in support of their initial/eligibility

criteria mentioned above along with the bid. They shall have also to submit the income tax

clearance certificate and solvency certificate.

30. No advance such as secured advance machinery advance, mobilization advance or materials

advance will be given.

31. The contractor shall get the electrical works executed through the authorized Government

approved licensed electrical person or firm in appropriate category in accordance to

contractual provisions.

32. The electrical works shall be carried out strictly in accordance with the directives issued by

Engineer in charge.

33. Contractors shall not have any dispute or claim for any kind of compensations

(i) If the quantity stipulated in the tender items varies or the scope of work changes &

thereby total amount of work increases/ decreases.

thereby total amount of work increases/ decreases.

(ii) If the work gets delayed/ postponed for some administrative/ technical decision what

34. In case of any dispute, decision of Municipal Commissioner shall be final and binding on the

35. Tenders which do not fulfill all or any of conditions or are submitted incomplete in any

respect will be rejected. Municipal Commissioner reserves the right to increase/decrease the

scope of work. No any claim to that effect shall be entertained. The Municipal Commissioner

also reserves the right to reject any or all the tenders without assigning any reason thereof.

36. The contractors are requested to quote their rates considering above tender conditions.

37. The contractor shall have to paid balance Security Deposit within 10 days from the date if

issue of Letter of Interest (LOI). And after paying the balance S.D. the time limit will be

started & Execution of Agreement to be done than after.

In case of delay in paying balance S.D. by more than 10 days penalty at the rate of

0.01% of sanction tender amount per day will be deducted from the Bill.

Eventhough in special case, If work is not started because of monsoon or any other

special reason (like site is not available), after evaluation of situation the actual date of

starting of work will be consider after approval of Dy.M.C. (South zone)

38. The Contractor shall not claim for increase or decrease in the quantity of the item or the scope

39. The payment shall be made as per the A.M.C policy for the work done by the contractor.

40. Conditional tenderes will not be accepted.

41. The Contractor must be followed the rules and regulations for COVID-19 as per guidelines

published by WHO/ Center government/State government /Ahmadabad municipal

Signature of contractor with seal Add. City Engineer (S.Z)

Date Ahmedabad Municipal Corporation

FORM OF BANK GUARANTEE

(hereinafter called the Tenderer) is desirous and preferred to tender for works in accordance with

the terms and conditions of tender for the work of

1 .Therefore. We hereby affirm that -we are guarantors on behalf of the Tenderer up to

(in figures) and we undertake to pay to Municipal Commissioner, Ahmedabad Municipal Corporation,

A'bad specified up to his first written demand, without demur without delay and without the necessity

of a previous of judicial or administrative procedures and without the necessity to prove to the Bank the

defects or short comings or debits of the contractor any sum within the limit of

2. We further agree that the Guarantee herein contemned shall remain in full force and effect during the

period that would be taken for the acceptance of tender.

However unless a demand of claim under this guarantee is made on its in writing on or before the

(Date to be specified will not he less than 180 days from the stipulated date of receiving the tender) we

shall be discharge form all liabilities under the guarantee thereafter.

3. We undertake not to revoke the guarantee during it currency except with the previous consent of the

Municipal Commissioner, Ahmedabad Municipal Corporation, A'bad in writing.

4. We lastly undertake not to revoke the guarantee for any charge in constitution of the Tenderer or of

Date: Signature & Seal of Guarantor...........................

5. The contractors shall have to furnish income tax clearance certificate before his tender is accepted

and intimate assessment number and ward under which he is assessed.

6. Copies of certificate as regards previous experience, if any, must accompany the tender.

Signature of Contractor ADD.C.E.(S.Z) Dy. Municipal

Commissioner (S.Z)

Date Ahmedabad Municipal Corporation

TENDER DECLARATION FORM

The Deputy Municipal Commissioner,

South Zone, Ahemedabad

Name of Works: - Repairing work and Civil Work as per requirement at diff. municipal buildings

under Diff. Budget and Buildings Related Works in Khokhra ward of South Zone.(ARC)

I/We the undersigned have carefully gone through and clearly understood the Tender documents for the

above work. I/We have satisfied myself/ourselves as to the location of site, examined drawings. I/We have visited

site & fully acquainted with local situations regarding materials, labours & others factors pertaining to work

before submitting tenders.

I/We do hereby offer to execute and complete the whole of the work within the time specified all in

accordance with the specification, designs, drawing and instruction in writing referred to in the said document

and with such materials as are provided for, at the respective rates which I/we have quoted in the schedule-B or

at such other rates as maybe fixed under the provisions of these conditions.In the event of this tender being

accepted I/We agree to enter into an agreement and when required andexecute the contract, according to your

fom1 of agreement as or in default where of I/we bind myself/ ourselves to forfeit the "Earnest Money Deposit."

I/We understand that if I/WE shall not enter in agreement within ten days or decided by AMC from the

date of receipt of letter of acceptance, you will forfeit the earnest money paid by me/us and take necessary

action as deemed fit.

I/We have enclosed a DEMAND DRAFT or PAY ORDER as an “Earnest Money Deposit", for the sum

as mentioned in tender notice, the full value of which is to be absolutely forfeited to the Employer If I/We fail to

commence the work specified. Otherwise the said sum shall be retained, by the Employer as on account of such.

Security)' Deposit'.' as provided for in the aforesaid documents.

I/We agree not to employ sub-contractors other then those that may be approved in accordance with

Conditions in the aforesaid documents.

I/We understand that you are not bound to accept the lowest or any tender which you may receive.

I/We am/are bound to execute the job if the work order is issued within 120 days from the date of

opening of the tender.

I/We agree to pay the Government income-Tax, Sales-Tax (Central and State) ,Sales Tax on work,

octroi duties and other prevailing Government taxes/charges on such items on which the same are leviable and

therates quoted by me/us are inclusive of the same.

Yours faithfully

Signature of the contractor

ybœtJtœ BGþrlrmvj ftuvotuhuNl

ÆÂûtKÍtul - Esluh Ftðþ

1. mbgbgto>t ykdu yuj.ytu.ytR. ytÃgt ctœ 1૦ rœJm mw^ebtk sÁhe me¾gtuhexe rzvtuÍex Che ðgth ctœ&e dKJtbtkk ytJNu. <ubs

ðgth ctœ Jfo ytuzoh R~gw &gu&e mbtg bgtoœt NY &guje dKtNu. <&t <u mt&u fhthvºt fhJtltu hnuNu. ylu <u bwsc ftb NÁ fhJtle

<theF dKJtbtk ytJNu. yuj.ytu.ytR. ytÃgt ctœ me¾gtuhexe rzvtuÍex ChJtbtkk rœl -1૦ fh<tk J^w rJjkc ltk rfMmt btk <ubs Jfo

ytuzoh ytvu&e ftb NY fhJtbtkk rJjkc &gu&e «r<rœl bkswh xuLzh hfbltk 0.01 % juFu vulÕxe cej btk&e ftvJtbtk ytJNu. <ub A<tk

rJrNÐ rfMmt btk atubtmt ltk fthKu y&Jt yrlJtgo fthKtumh ftb NÁ &R Nfu <ub l ntug <u rfMmt btk gtuøg<t aftme zu.Bgw.frb©h

(œ.Ítul) le bkswhe bu¤Je ftb NÁ fhJtle <theF dKJtbtk ytJNu.

2. xuLzh Jujezexe 1૨0 r>Jm Mþ^ele hnuNu.

3. xuLzh Ch<e JF<u yluoMxble ChJtle hnuNu.

4. S.yum.xe. «J<obtl œh «btKu yjd&e awfJJtbtk ytJNu. xuût fu yLg ftuE vK mhfthe fhJuht ChJtle sJtc>the ftuLx[tfxhle

5. htsg / fuL÷ mhfth©elt JF<tuJF<lt ftg>t Bþsc su ftuE hfble fvt< fhJtle &Nu <u bwsc ftuLx[tfxlt cejbtk&e fvt< fhJtbtk

6. juch JuÕVuh Vkz btxu ntjbtk htsg mhfth©eyu fhuj nwfb Bþsc 1% (yuf xft) hfb cejbtk&e ftve juJtbtk ytJNu.

7. bxehegj xuMxekdltu xuMxekdltu FhuFh &guj Fao ftuLx[tfxh©e vtmu &e Jmwj fhJtbtk ytJNu.

8. ftb ytv<e JF<u su <u ftuLx[tfxhLþk hSMx[uNl ægtlbtk htFelu <ule bgto>tbtk ftb ytvJtbtk ytJNu.

9. yt xuLzh su <u Jdolt btLg gtœe lt ftuLx[tfxhtu Che NfNu. dJobuLxlt btLg ftuLx[tfxhu y.BGþ.ftuvotu.btk btLg ftuLx[tfxhtu le gtœebtk

hSMxuNl fhtJJtLþk hnuNu.

10. yt Wvhtk< y.BGþ.ftuvotu. lt slhj ftuLx[ufx fLzeNl ylu xuLzhle Nh<tu ck^lf<ot hnuNu. su BGþrl.ftuvtuohuNl Juc mtEx

www.ahmedabadcity.gov.in Wvh Bþfuj Au.

11. ftuLx[tfxh lu vubuLx - hl´dcej BGþrl.ftuvot.u lt su <u atÕþ mbglt mhfGþjh Bþsc fhJtbtk ytJNu.

12. Nh<e xuLzh MJefthJtbtk ytJNu lrn.

13. xuLzh MJefthÔþ, h> fhÔþ, ftulu ytvÔþ ylu fgt CtJ&e ytvÔþ <u ykdu zu.BGþrl.frbNlh©eltu rlKog ytFhe hnuNu.

14. >huf ytExbltk MvuNeVefuNl ftuvtuohuNlltk bkswh &guj MvuNeVefuNl Bþsc <&t RLzegl MxtLzzo ftuz ytuV «ufxem ltkk btLg ^tht ^tuhKtu

Bþsc hnuNu ylu zu.mexe yuLSlegh©eltu rlKog ytFhe hnuNu. Jtuxh´d fhJtbtk lrn ytJu fu >hhtus J^thtltu zucheÍ WvtzJtbtk lrn

ytJu <tu ftuLx[tfxhltk Fauo ylu òuFbu Jdh ltuxemu Jtuxh´d fhtJJtbtk <&t zucheÍ WvtzJtbtk ytJNu ylu cejbtk&e hfb ftve juJtbtk

15. yufe JF<u yuf fh<tk Jæþ søgtytuyu ftbNY fhJtltu Jfoytuzoh b¤u <tu ftb yuf mt&u s yuf s c<tJuj søgtyu fhJwk vzNu. yuf ftb

ÃþÁ &tg vAe cesw ftb NY fheyu <uÔþk atjNu lrn.

16. atÕþ ftbu ftuEvK mrJom jtEllu LþfNtl l &tg <u he<u ftb fhÔþk vzNu, òu ftuE mrJom jtEl lu LþfNtl &Nu <tu <ule mk ÃËKo sJtcœthe

(òlbtjle) ftuLx[tfxhle vtu<tle hnuNu. mtEx vh ftb œhBgtl bswh fu sl<t lt ftuE btKmlt òlbtjlu lwfNtl &tg <ule

sJtcœthe ftuLx[tfxhle hnuNu. vtujem Vhegt> &tg <tu <ule sJtc>the vK ftuLx[tfxhle hnuNu. CuFz ^me l vzu <ule sJtc>the vK

vtujem Vhegt>btk ftuLx[tfxhle hnuNu. CuFz ^me l vzu <u btxu mjtb<elt vdjtk (suJt fu >tuhzwk ctk^e bsqh Ftztbtk W<thJt, mtuh´d

ylu Mx[x´d fhJt rJduhu) je^t Jdh bsqhlu Ftztbtk W<thNu <tu ftuLx[tfxh s vtujem Vhegt>btk sJtct>h hnuNu ylu BGþrl.ftuvtuohuNlltu

ftuEvK MxtV ytlt btxu sJtc>th hnuNu lrn. ytxÕþk mbSlu s xuLzh ChÔþk. Btswhtultu rJbtu vK W<thtJJtu.

17. juch yufx «btKu <ubs Bgw. frb§h©eltkk vrhvºt lkch 81 <t.26.02.2015 bwsc <btb juch / bsqhtulwk dwsht< rcÕzekd yuLz

y^h fLMx[[fNl Jfombtkk VhSgt< hSMx[uNl fhtJJt ykdu ybj fhJtltu hnuNu <&t fuxjt juch jtJNtu <u vK sKtJJtLþk hnuNu. juch

yufx «btKu ftgoJtne lrn &E ntug <tu <u btxu ftuLx[tfxh mkÃËKovKu sJtc>th hnuNu. ylu <ulu vubuLx ytvJtbtk ytJNu lrn <ubs ct¤

bswhtulu ftb Wvh htFe NftNu lrn. <ubs JF<tu JF< Bgw. frBNlh©e îtht fhJtbtkk ytJuj mh¾gwjhtule Nh<tu ftuLx[[tfxhlu ckk^l

18. ftuEvK ftgœtfeg jexeduNl ybœtJtœ Nnuhle ftuxobtk hnuNu.

19. ftuE fthKmh òu ftuLx[tfxhlu ftb l ytve Nftg <tu <u ykdu ftuLx[tfxh ftuEvK «fthltu LþfNtle- J¤<hltu n¬ >tJtu fhe NfNu lrn fu

ftg>tfeg ftgoJtne yt ykdu &E NfNu lrn. xuLzh bkswh &gtltu y&o ftb ytve s >uJtLþk Au <uJtu &E NfNu lrn.

20. ytuVh y&Jt xuLzhbtk œNtoJuj ytRxbltu sÚ&tu mkCrJ< sÚ&tu Au subt atjw ftb œhBgtl VuhVth &Jtle N¾g<t hnuje Au.

21. M&¤ vrhÂM&r< / sYhegt< Bþsc ftb fhtJ<t xuLzhbtk sKtJuj fJtuLxexebtk J^ Dx &Nu <tu <u ykdu ftuLx[tfxh îtht ftuEvK «fthle

J^thtle ltKtkfeg btkdKe fhe NfNu lrn. ylu ftb ytuAw &tg <tu ftuLx[tfxhle J¤<hle btkdKe MJefthJtbtk ytJNu lrn.

22. mtEx vh jtJJtbtk ytJuj btjmtbtl hesufx fhJtbtk ytJu <tu ðþhk< r>l-1btk vh< jE sJtltu hnuNu. yLg&t ftuvtuohuNl îtht <u

hesufx btjltu rlftj fhe >uJtbtk ytJNu ylu <ule LþfNtlele sJtc>the ftuLx[tfxhle hnuNu.

23. su ftuLx[tfxh vtmu bswhtultu rJbtu, ydtW&e W<htÔgtu ntug <ublu «t^tLg ytve ftb ytve NfNu.

24. bsqhtu fu htn>theytulu ftuEvK «fthltu yfMbt< &tg <tu <ule vtujem ftgoJtnele fu juch yufx bwscle ftgoJtnele sJtc>the

yb.BGþrl.ftuvtuo.lt fboatheytule ftuEvK he<u hnuNu lrn.btºt ftuLx[tfxh s yt btxu sJtc>th hnuNu. bswhtulu dbçËx, nuÕbux nt&ltk

btuò rJduhu ftuLx[tfxhu VhSgt< ytvJtltk hnuNu. bswhtu <&t MþvhJtEÍ fu Bþft>bltu rJbtu vK W<thJtltu VhSgt< hnuNu. juch yufx

Bþsc ltuk^Ke fhtJe <ult rlgbtuLþk vtjl fhJt ftuLx[tfxh ck^tguj hnNu. ct¤ bswhtu htFe NftNu lrn.

25. bsqhtu fu htn>theytulu ftuEvK «fthltu yfMbt< &tg <tu <ule vtujem ftgoJtnele fu juch yufx bwscle ftgoJtnele sJtc>the

yb.BGþrl.ftuvtuo.lt fboatheytule ftuEvK he<u hnuNu lrn.btºt ftuLx[tfxh s yt btxu sJtc>th hnuNu. bswhtulu dbçËx, nuÕbux nt&ltk

btuò rJduhu ftuLx[tfxhu VhSgt< ytvJtltk hnuNu. bswhtu <&t MþvhJtEÍ fu Bþft>bltu rJbtu vK W<thJtltu VhSgt< hnuNu. juch yufx

Bþsc ltuk^Ke fhtJe <ult rlgbtuLþk vtjl fhJt ftuLx[tfxh ck^tguj hnNu. ct¤ bswhtu htFe NftNu lrn.

26. rcÕz´d ftble ytExbtu btxu - slhj xuflefj MvuNeVefuNl ytuV rcÕz´d Jfomle çþf Bþsc yLþmhJtltk hnuNu. Mt>h ÃþM<eft øþsht<

çþf Mxtumo 20-ce, zeMx[ef Ntuv´d, mufxh-21, dtk^eldh&e b¤e hnuNu. su Juc mtEx www.ahmedabadcity.gov.in Wvh

27. bxehegj fu ceò xuMx´d hevtuxo ftuLxtfxhu vtu<tlt Fauo ftuvotuhuNl sKtJu <u søgtyu fhtJJtlt hnuNu. yt ykdultu mkÃËKo Fao <&t

Bgwrl.MxtVlu juctuhuxhe Mþ^e <&t buLGþVufah´d søgt Mþ^e jtJJt -jE sJtltu Fao vK ftuLx[tfxhu CtudJJtltu hnuNu.

28. btj su <u Mxtumo Wvh y&Jt mtEx Wvh jtuftulu lz<h l &tg <u he<u MËalt Bþsc W<thJtltu <ubs dtuXJJtltu hnuNu.

29. òu BGþ.yuLSlegh´d MxtV sKtJu <tu ftuLx[tfxhu atÕþ ftbu mtEx Wvh zeÍexj fubuht&e ftb atÕþ &gt vnujt, atÕþ ftbu <&t ftb ÃËKo

&gtltk Vtuxtud{tVm BGþrl.yturVmbtk ytvJtltk hnuNu <u rmJtg ftbLþk vubuLx fhJtbtk ytJNu lrn òu MxtV MËalt ytvu <tu fubuhtbtk&e

ftuBÃGþxhbtk Vtuxt x[tLmVh fhe ytvJtlt hnuNu. yt ykdu ftuE vK J^thtltu Fao ytvJtbtk ytJNu lrn.

30. ftuEvK fthKmh xuLzh h> fhJtbtk ytJu <tu ftuLx[tfxh <u ykdu ftuEvK «fthltu n¬ >tJtu fu J¤<hle btkdKe fhe NfNu lrn. yt Nh<

MJeftgo ntug <ubKu s xuLzh ChÔþk.

31. bxehegÕm suJt fu hu<e, #xtu, mebuLx, vtEv, rJduhu MxtLzzo bxehegÕm MvuNeVefuNl «btKult jtJJtlt hnuNu. sgtk ftuE atuFJx l

&E ntug ðgtk ytE.yum.ftuz «btKu bxehegÕm jtJJtLþk <&t xuMx´d fhtJJtLþk hnuNu. <ubs ftuLx[tfxhu muBvj yu«wÔz fhtÔgt ct> ftb

NY fhtJJtLþk hnuNu.

32. yt xuLzhbtk òu ftuE ytExb hne dE ntug <tu <u atÕþ yum.ytu.yth.btk&e juJtbtk ytJNu ylu òu yum.ytu.yth.btk ytExb l ntug <tu

btfuox huEx&e huEx yultjemem fhe su CtJ Ft<t <hV&e ytvu <u ftuLx[tfxhu juJtltu hnuNu. yt mbSlu s xuLzh ChJtLþk hnuNu. J^tht

le ytRxb btk ftuLx[tfxhle btkdKe Bþsc CtJ b¤Nu lrn.

33. atÕþ ftb >hBgtl «tuxufNlle mkÃËKo sJtc>the ftuLx[tfxhle hnuNu subtk vevzt, >tuhzt, CgMËaf ctuzo, jtj xul , cuhefuxekd xuv,

ÃjtMxef vèe, rJ. ftuLx[tfxhu jtJJtLþk ylu mtaJJtLþk hnuNu. ylu ftuEvK yfMbt< &Nu <tu <ule mkÃËKo sJtc>the ftuLx[tfxhle hnuNu.

34. MxtV MËalt ytvu <tu mtEx Wvh zuEje «tud{um hSMxh ftuLx[tfxhu htFJtLþk hnuNu. >hhtus ytme.mexe yuLSlegh©ele <ubtk mne juJtle

hnuNu, <ubtk >hhtus ftb fh<t bswhtule mkÏgt, fhuj ftbdehe <&t yr^ftheytuyu ftb Mþ^thJt fu «tud{um J^thJt ltuk^ fhuj ntug <tu <uLþk

ftuBÃjtgLm ytvJtLþk hnuNu ytJe ltuk^ltk sJtc l &gu fu <u «btKu M&¤ Wvh ybj l &gu ftuLx[tfxhlu vulÕxe fhJtle m•tt ડેપ્યુટી

સીટી ઈજનેર©elu hnuNu <u ykdu ftuLx[tfxh ftuE Jtk^tu jE NfNu lrn.

35. rlg< mbgbgto>tbtk ftb ÃþY l &gu&e xuLzh ¾jtuÍ bwsc ctfe ftbltkk 10.00% juFu vulÕxe BGþrl.ftuvtuohuNllu åþfJJtle hnuNu.

36. xuLzh le yt Nh<tu ce - 1 Vtubobtk sKtJuj Nh<tulu ytuJhYj fhNu.

Wvhtuf< <btb Nh<tu <&t rlgbtu buk ft¤SÃËJof Jtkauj Au ylu blu fçËj bksqh Au.

ftuLx[tfxhle mne - rm¬tu એડી. િીટી ઈજિેર

btuctEj lkch mt&u (œrûtK Ítul)

AHMEDABAD MUNICIPAL CORPORATION

ENGGNIERING DEPARTMENT

GENERAL SPECIFICATION

Time limit for the work shall be as per tender notice after the order to start the works. Progress

of work should be in proportion to time limit. The details of reinforcement of R.C.C. work shall be as

per design and instructions of ADD. CITY ENGINEER-5 and his order will be considered final.

The contractor shall have to maintain account of steel, cement and other materials that may be

brought by him on site. This account shall be regularly maintained and kept open for inspection by

Municipal Staff. Watering of all the items shall be as per instructions otherwise no payment shall be

made to contractors. Mixing of concrete shall be done by concrete mixer machine. Arrangements of

binding vibrator for R.C.C. works if required shall have to be made by the contractor.

The contractor shall be remain responsible for Workmen’s compensation if any accident. The

contractor shall arrange for barricading at night and arrangement of Pagi at night to direct the traffic. He

shall be responsible for any damage to public. If any incident happen, during the execution of work. In

case of dispute for unseen or overlooked items the decision of the Dy. City Engineer shall be final. The

contractor shall have to give site clean of all rubbish during the work and at the time of completion of

work and hand over the site with final finishing of the work as directed. All the rejected materials shall

be removed from site within 24 hours by contractor at this risk and cost. Debris shall have to cart daily

For mixing mortar either for masonry or for plaster or for any other purpose contractor shall have

to prepare through of bigger size and mix the mortar in the required proportion. In on case he shall be

allowed to mix the mortar either on floor or any finished surfaces. The contractor shall have to make his

own arrangement for water required for the work.

If any extra item crops up during the progress of work the same shall be carried out by the

contractor and he shall be paid at the rate fixed by D.C.E.. as per the rate analysis based on latest SOR

or if item is not available in SOR than based on current market rates. In case of extra item decision of

Add. City Engg. shall remain final regarding rate.

If in the interest of the Corporation it is necessary to change either any site or the design of the

propose work the contractor shall carry out the same at his quoted rates without charges any extra and

the contractor will have to carry out the works and he will be paid at the rate quoted by him. No claim

for extra rate for subsequent changes in site and design is entertained.

The cubical contents of the cement bag shall be taken as 1-20 cft. Per bag and the contractors

shall have to prepare the measures boxes according to this measure.

Octroi exemption passes shall not be given for any materials required for the work. Contractor

will be fully responsible for compliance of the various provisions under contract Act. 1970 and the Rules

framed the to under.

The tender for the work shall remain open for a period (120) days from the date of opening of

the tenders for this work and that the tenderer shall not be allowed to withdraw on modify the offer on

his own during the period. If any tenderer withdraw or makes any modifications or addition in the terms

and conditions of his tender not acceptable to the Municipal Corporation the Municipal Corporation

shall without prejudice to any right or remedy be at liberty to forfeit in full the said earnest money and

black list the contractor.

If work is not started within specified time limit i.e. within ten days from the date of order to

start the work the penalty of the 0.01% tender Amount per day of delay of start shall be recovered

separately from the immediate bills payable to the contractor. Contractor has to make his own

arrangement for procurement of steel and cement.

Contractors should note the following conditions carefully:-

i) Conditional tender shall not be accepted.

ii) All tenders are to be submitted in duplicate without which the tenders are liable to be rejected.

iii) In case of tender downloaded from website, tender fee & EMD should be submitted in form of

iv) Condition of Form - B1 only Standard Specification of material & code of practice will be

applicable. Form B1 can be is available in website. Specification shall be as per ' R & B Dept. -

Govt. of Gujarat booklets of Building Works & and Road Works Specifications published by

Gujarat Book Depot, Sector-21. Gandhinagar. Other techinical condition will be applicable as

per tender condition only.

CONTRACTOR'SSIGNATURE & STAMP ADD. CITY ENGINEER

Mobile No.:- (South Zone)