Tender for the work of Erection & Maintenance of HT/ LT Line & Transformer Centre of Rajpipla-1 SDN (also in any other sdn of Rajpipla Dn if required) for SI and other Scheme under Rajpipla Division

ITEM CODE Details of Works Qty Unit Amount

STRINGING OF 100MM2 ACSR/100MM2 AAAC CONDUCTOR FOR LT LINES INCLUDING COND

FIXING OFINSULATORS, BINDING JUMPERING ETC. PER

STRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING FIXING OF COND

INSULATORS, BINDING JUMPERING ETC. PER

ERECTION OF DOUBLE POLE STRUCTURES WITH MOUNTING OF AB SWITCH, HG

FUSES, TRANSFORMERS, LIGHTENING ARRESTORS, DISTRIBUTION BOX. OF

METERS 270 KGAND PSC POLES INCLUDING EXCAVATION OF PITS AND REFILLING OF

EARTH, CARTING OF TRANSFORMERS FROMSTORES TO SITE, FIXING OF CHANNELS,

32 9926000032 SUPPORTING ANGLES,BRACINGS CROSS ARMS CLAMPS, ANTI-CLIMBING No. 10662

DEVICES,DANGER BOARDS, CONDUCTOR AND CABLE WIRING ETC.COMPLETE AND

PAINTING OF FABRICATED MATERIALS USED ON THE POLES AND NUMBERING WITH

COST OF PAINT AS PER STANDARD SPECIFICATION BUT EXCLUDING ERECTION OF

GUY SETS AND EARTHING.

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF FABRICATION AT STORE &

STACKING OF POLE SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITH TRANSFORMER)

35 9926000035 WITH CREDITING OF FABRICATION & TRANSFORMER AT STORE & STACKING OF POLE No. 3975

SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE) (WITHOUT

36 9926000036 TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE & STACKING OF POLE No. 2701

SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

STRINGING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM INCLUDING

FITTING OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP,

38 9926000038 FIXING OF CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER KM 12330

WIRE AND TO PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY

INSULATED PIERCEING CONNECTORS THROUGH SERVICE CONNECTION BOX

COMPLETE AS REQUIRED & DIRECTED BY ENGINEER IN CHARGE.

STRINGING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

ARM, BINDING TO PIN INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED & DIRECTED BY ENGINEER IN CHARGE

STRINGING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM INCLUDING FITTING OF ALL

ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF CROSS

ARM, BINDING TO PIN INSULATOR,PREPARING SHACKLE POINT,JUMPERS ETC. AS

REQUIRED AND DIRECTED BY ENGINEER IN CHARGE

STRINGING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM INCLUDING FITTING

OF ALL ACESSARIES I.E. SPECIAL DESIGN SUSPENSION / TENSION CLAMP, FIXING OF

CROSS ARM, LT SHACKLE INSULATOR ETC. FOR FIXING OF MESSENGER WIRE AND TO

PROVIDE SERVICE CONNECTION ON AERIAL BUNCH CABLE BY INSULATED PIERCEING

CONNECTORS THROUGH SERVICE CONNECTION BOX COMPLETE AS REQUIRED &

DIRECTED BY ENGINEER IN CHARGE.

DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING THE OLD MATERIAL TO

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITHOUT

43 9926000043 TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE AND STACKING OF POLE No. 2828

SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG PSC POLE(WITH

44 9926000044 TRANSFORMER) WITH CREDITING OF FABRICATION AT STORE AND STACKING OF POLE No. 5332

SAFELY ON ROAD SIDE OR CREDITING TO DEPARTMENTAL STORE

DISMENTLING OF 11KV ABC OF 3*95 SQ MM +80 SQ MM AND CREDITING FITTING OF

ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE

HT,LT &TC Revised as per Letter No DGCS/1408/01/2025 Dt: 27-01-2025

Maintenance Revised as per Letter No DGCS/1410/01/2025 Dt: 27-01-2025

UG Cable Revised as per Letter No DGCS/1411/01/2025 Dt: 27-01-2025

ITEM CODE Details of Works Qty Unit Amount

DISMENTLING OF 22 KV ABC OF 3*70 SQ MM +95 SQ MM AND CREDITING FITTING

OF ALL ACESSARIES AND FABRICATION TO DEPARTMENTAL STORE

DISMENTALING OF LT ABC OF 1*35 SQ MM + 1*25 SQ MM AND CREDITING FITTING OF

ALL ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM AND CREDITING

FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

DISMENTALING OF LT ABC OF 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM AND CREDITING

FITTING OF ALL ACESSARIES TO DEPARTMENTAL STORE.

RESTRINGING OF ALL TYPE OF CONDUCTOR (EXCEPT DOG CONDUCTOR) FOR 11/22KV COND

& LT LINES INCLUDING FIXING OF INSULATORS, BINDING JUMPERING ETC. PER

RESTRINGING OF DOG CONDUCTOR FOR 11/22KV HT LINES INCLUDING , BINDING COND

JUMPERING ETC. PER

LABOUR CHARGE FOR THE INSTALLATION OF NEW DTR METER. (METER WILL BE

PROVIDED BY DGVCL)

LABOUR CHARGE FOR THE REPLACEMENT OF DTR METER AND OLD METER SHOULD BE

CREDITED TO SDN STORE. (METER WILL BE PROVIDED BY DGVCL)

LABOUR CHARGE FOR PROVIDING CT COIL FOR DTR METER CONNECTION. (CT COIL PER

WILL BE PROVIDED BY DGVCL) CT

LABOUR CHARGE FOR REPLACEMENT OF CT COIL FOR DTR METER CONNECTION AND

55 9926000055 OLD CT SHOULD BE CREDITED TO SDN STORE. (CT COIL WILL BE PROVIDED BY 126

LABOUR CHARGE FOR FIXING OF MMB FOR DTR METER (MMB WILL BE PROVIDED BY

LABOUR CHARGE FOR REPLACEMENT OF DTR METER BOX. (METER WILL BE PROVIDED

PROVIDING / REPLACEMENT OF 1.5 SQ MM 10 CORE COPPER CABLE 3.5 METER (CABLE

TO BE PROVIDED BY AGENCY)

LABOUR CHARGE FOR PROVIDING/RECONNECTION OF TERMINAL CONNECTION WITH TERMI

PROPER SIZE OF LUGS. (LUGS COST IS BORNE BY AGENCY) NATIO

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF

DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO-FORMA

60 9926000060 REPORT SHOULD BE SUBMITTED TO SDN OFFICE.(* ONLY IF ALL PARAMETER OF 60

VOLTAGE, CURRENT & LOAD AS SHOWN IN PER-FORMA IS FILLED) AS PER THE

INSTRUCTION OF ENGINEER IN-CHARGE.

LABOUR CHARGE FOR THE SPOT READING OF DTR METER WITH DETAIL SURVEY OF

DEFECT IF ANY. A DULY SIGN COPY BY SURVEYOR PERSON OF AGENCY IN PRO-FORMA PER

REPORT SHOULD BE SUBMITTED TO SDN OFFICE. (DULY FILL PER-FORMA IN FAULT DTR

CONDITION IN WHICH READING PARAMETER IS NOT SHOWN IN METER)

INSTALLATION OF DTR METER INCLUDING METER BOX, PROVIDING & FIXING OF 1.5SQ

62 9926000062 MM SINGLE STRAND 10 CORE ARMOURED COPPER CABLE (3.5METER), TERMINATION IN No. 2726

METER & COIL ETC.(METER, METER BOX, C.T./P.T. COIL WILL BE PROVIDED BY DGVCL)

INSTALLATION OF DTR METER INCLUDING METER BOX, TERMINATION IN METER &

63 9926000063 COIL ETC. (WITHOUT 10CORE COPPER CABLE) (METER, METER BOX, C.T./P.T. COIL No. 886

WILL BE PROVIDED BY DGVCL)

Binding of messanger Conductor at with a distance not more than 0.75 mtr with 6 turns

minimum on XLPE Cable with single strand binding wire (including cost of binding wire)

TOTAL ESTIMATED AMOUNT OF SCHEDULE B1

1 9924000001 Cutting of Tree branches surounding HT/LT line 57

Replacement of old jumpers & providing new double jumpers with 8" binding & capsuling

with PVC pipe etc

3 9924000005 Support pole for Stay PSC/STP/RSJ No. 633

4 9924000006 Pin binding of conductor 11/22kv Pin insulator No. 18

5 9924000007 Pin binding of conductor 11/22kv Pin insulator per pole in costle area with cleaning . No. 41

6 9924000008 Pin binding of conductor LT shakel insulator No. 14

HT,LT &TC Revised as per Letter No DGCS/1408/01/2025 Dt: 27-01-2025

Maintenance Revised as per Letter No DGCS/1410/01/2025 Dt: 27-01-2025

UG Cable Revised as per Letter No DGCS/1411/01/2025 Dt: 27-01-2025

ITEM CODE Details of Works Qty Unit Amount

7 9924000009 Replacement of one/both disc.insulator at strain pole No. 161

8 9924000010 Replacement of LT shackle insulator at cut point No. 31

9 9924000011 Refixing of V cross Arm No. 61

10 9924000012 Replacement of V cross Arm No. 210

11 9924000013 Refixing of Top fitting in proper position No. 41

12 9924000014 Replacement of Top fitting No. 51

13 9924000015 Replacement of LT cross Arm No. 105

14 9924000016 Providing DO fuse on DP with carting & jumpuring(ONE DO FUSE) No. 243

Numburing of pole with paint by preparing back ground of one colour and have

lettering(height 3" * width 0.5") using stensil

16 9924000018 Fixing of MMB(1PH.) at consumer end No. 86

17 9924000019 Fixing of MMB(3PH.) at consumer end No. 128

18 9924000020 Replacement of (1ph.) meter for Urban area No. 51

19 9924000021 Replacement of (1ph.) meter for Rural area No. 74

20 9924000022 painting consumer no. on MMB (Urban) (with letter size height 40mm* width 8mm) No. 11

21 9924000023 painting consumer no. on MMB (Rural) (with letter size height 40mm* width 8mm) No. 19

22 9924000024 Replacement of deteriorated Single phase Service line No. 93

23 9924000025 Fixing of new dist. Box with complete wiring including clamps,nut bolts etc. No. 816

24 9924000026 Reparing of guarding involving reshaping of bearer wire cross lacing binding etc. R Mtr. 25

25 9924000027 Painting of steel fabricated material of RSJ DO DP structure with paint No. 2406

Painting of steel fabricated material of RSJ pole mounted transformer double pole

structure with paint

27 9924000029 Painting of steel fabricated material of RSJ single pole with paint No. 902

28 9924000030 painting of steel fabricated material of PSC Single pole (HT line) with paint No. 135

29 9924000031 painting of steel fabricated material of PSC DO DP double pole with paint No. 362

painting of steel fabricated material of PSC double pole at pole mounted transformer with

31 9924000033 Providing line seperater single phase No. 11

32 9924000034 Providing line seperater three phase No. 31

33 9924000035 Replacement / Providing of stay insulator along with adjustment of tension in stay wire No. 276

Replacement of deteriorated /providing LT dist. Box with new up to 100KVA capacity &

crediting it to store.

Replacement of deteriorated /providing LT dist. Box with new above 100KVA capacity &

crediting it to store.

36 9924000038 Adjustment of tension in stay wire No. 158

37 9924000039 Refitting of LA No. 31

38 9924000040 Converting pin point to Shackle point including dismentaling & restringing etc. 2232

39 9924000041 replacement of 11KV Pin insulator with providing new double pin binding No. 60

replacement of 22KV Pin insulator by new 11kv pin insulator with spares & providing new

double pin binding

41 9924000043 Providing 11kv double disc insulators with binding & restringing No. 161

42 9924000045 Replacement of existing 11kv conductor (all size) with new double pin binding 4354

43 9924000046 Plumbing of PSC Pole with straightening at pin point No. 287

44 9924000047 Plumbing of PSC Pole with straightening at tension point No. 373

45 9924000048 Plumbing of tilted DP structure (PSC/RSJ/STP) with refilling of stone Murrum etc. No. 816

Providing new 11kv AB /GO switch with fabrication and insulated colour code jumper,

binding, lugs etc

Replacement of old 11kv AB /GO switch with providing new insulated jumper, binding,

48 9924000052 Providing cage type loop guard in verticle LT line with using PVC reel insulators etc 53

Labour charges for replacement /providing of MMB & service with all accessories for three

phase connection

Labour charges for replacement /providing of MMB & service with all accessories for single

phase connection

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE) 25/63/100/200 KVA with all

fabrication & creditig the old material to store

52 9924000060 Dismentaling & removing of service line from pole & crediting to S/dn (1 ph.) No. 111

53 9924000061 Dismentaling & removing of service line from pole & crediting to S/dn (3 ph.) No. 205

54 9924000062 Reconnection of service line complete with PVC cable (1 Ph) No. 244

55 9924000063 Reconnection of service line complete with PVC cable (3 Ph) No. 328

Providing spiral type earthing by G.I. NO 8(weight 2kg -5mtr in length) with salt and coal

56 9924000064 10kg each, including pvc rigid pipe 20mm dia( 1.5mtr length) to pass exposed part of G.I. No. 816

wire at consumer end with all materials, earth resistance should be less than 2 ohms

HT,LT &TC Revised as per Letter No DGCS/1408/01/2025 Dt: 27-01-2025

Maintenance Revised as per Letter No DGCS/1410/01/2025 Dt: 27-01-2025

UG Cable Revised as per Letter No DGCS/1411/01/2025 Dt: 27-01-2025

ITEM CODE Details of Works Qty Unit Amount

Providing and fixing of signle core 1.5 sq mm single strand copper insulated cable with

cable nail clip for spiral type earthing at consumer end. The end of G.I. no 8 is to be

connected by connector with copper cable of which other end shall be connected to the per

earth terminal of meter box. This item shall be used in location where there is more meter

distance between earth terminal and earthing terminal of meter. (All materials supplied by

Stringing of LT ABC of 1*35 SQ MM + 1*25 SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp, fixing of cross arm, LT shackle insulator etc.

for fixing of messenger wire and inclusive of dismantling charge of existing bare

58 9924000065 conductor and crediting in to store & dismentaling of service line from LT bare conductor KM 8922

and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer in

Stringing of LT ABC of 3*50 SQ MM +1*25 SQ MM+1*35 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of dismantling charge of existing

59 9924000066 bare conductor and crediting in to store & dismentaling of service line from LT bare KM 22303

conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer

Stringing of 11KV ABC of 3*95 SQ MM +80 SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp, fixing of cross arm, binding to pin

60 9924000067 insulator,preparing shackle point,jumpers etc. and inclusive of dismantling charge of KM 44608

existing bare conductor and crediting in to store complete as required & directed by

Engineer in Charge

Stringing of 22 KV ABC OF 3*70 SQ MM +95 SQ MM including fitting of all acessaries i.e.

special design suspension / tension clamp, fixing of cross arm, binding to pin

61 9924000068 insulator,preparing shackle point,jumpers etc. and inclusive of dismantling charge of KM 55019

existing bare conductor and crediting in to store complete as required & directed by

Engineer in Charge

Stringing of LT ABC of 2*50 SQ MM +1*25 SQ MM+ 35 SQ MM including fitting of all

acessaries i.e. special design suspension / tension clamp, fixing of cross arm, LT shackle

insulator etc. for fixing of messenger wire and inclusive of dismantling charge of existing

62 9924000069 bare conductor and crediting in to store & dismentaling of service line from LT bare KM 15613

conductor and to provide service connection on Aerial Bunch Cable by insulated pierceing

connectors through service connection box complete as required & directed by Engineer in

63 9909000001 Carting of PSC poles at site No 217

64 9909000021 Carting of RSJ poles at site No 435

TOTAL ESTIMATED AMOUNT OF SCHEDULE B2

1. DGVCL will provide key material like M.S. materials,ABC/Bare conductors,PSC/RSJ

Poles,Insulators,Fabricated materials etc. to the contractor.

2.All fabricated items shall be fabricated as per DGVCL approved drawing and by welding rods confirming to the

relevent ISI specification and as directed by Engineer in charge.

3.Necessary electricity connection for fabrictated items shall be provided by DGVCL on payment of required charge

for connection & electricity bill of the same shall be paid by the agency.

4.All the rates are inclusive of PF and Exclusive of GST applicable time to time.

5.All steel material are to be painted as below:

(a) Scrubbing of rusted surface properly before applying the paints on to the RSJ poles & steel fabricated materials

of RSJ/PSC poles is must required.

(b) Two coats of approved ISI mark red oxide (primer) is to be properly painted for the RSJ poles & steel fabricated

materials of RSJ/PSC poles.

(c) Two coats of approved ISI mark silver paint (i.e. triple mangoes or equivalent quality silver paint) is to be

properly painted on to the RSJ poles & steel fabricated materials of RSJ/PSC poles.

Total of B1 & B2 is Rs. TOTAL

Executive Engineeer (O&M)

DGVCL,Rajpipla Division